Applying P&S LEGEND Coating! | Ceramic Coating Prep & Install

[@MyGuyKirby]

Perfectly clear, that is how Legend appears and so are your steps! Creature Edgeless towels are the 420- models? Just received and washed my TRC Chenille wash mitts and they are the best i have owned.

[@despatcho4239]

Lots of people complaining on the video, I'm just glad we have more information on legend on here

[@GDavis49]

Exactly 👍

[@frtorres87]

So true

[@demonslayer8085]

That tip on removing license plate was good, I never thought of doing that. Please do a product review of Legend ceramic coating in the future. Maybe even a comparison between it and a leading competitor like cquartz!

[@AMP8424]

TRC, how many towels should I be using on a coating removal? Like do I have to use a new towel after every panel or can a couple of removal/a couple leveling towels do the entire car?

[@timothyhanson2864]

One applicator was used for applying the coating on the entire vehicle?

[@ct181]

Any issue with high spots. I know a few black vehicles i have had high spot issue when pulled out into direct sun. I realize white and light color the high spots are harder to detect. Thanks

[@michaelmosberger1245]

What towels to level and buff. Also how much of the product would it take to do a Toyota Tacoma TRD pro. Thanks

[@rsxfreak79]

MDX looks amazing! Job well done fellas. 👏

[@vishaalsky9805]

Nice. I was just wondering as I've seen most people do the Iron decon after wash whereas you guys did it as a pre-treatment. is there any difference?

[@MikeGDetailing]

Came out looking great. Legend is nice as I recently applied it onto my car. It is not the most user friendly as it is very finicky with higher humidity and mid 70 degree weather. But if applied correctly it is nice. Topping it with Sole added that little extra something.

[@davida7713]

Was told this alright that legend isn’t that easy to use . Very grabby & not the slickest coating to use .. was going to purchase it but opted against it due to its high price & sub standard reports

[@gseybold]

Why are the new pearl pucks not being used? I know that the directions say to use their applicator but I'm use most if not all manufacturers say the same.

[@demonslayer8085]

Yeah, that applicator from Legend looks like it would absorb/waste A LOT of product!

[@gseybold]

Thanks for the reply. I'm looking forward to using the new puck on my 2020 Mustang GT Premium coating project. Lots of bends and curves that the puck will transition over the surfaces very easy.

[@MasterOfShine]

@@demonslayer8085 the applicator, supplied with legend is from Autofiber and features the barrier. Our orange pearl applicators(orange) do not have a barrier. But they still work great.

[@AmirAbdullah]

So I used Legend recently in a air conditioned shop below 80 degrees humidity wasn’t that high and it flashed real fast and wipe off was really bad. Same ole decon process , polished down as well.

[@hartlanddetailer5670]

A couple of questions? Should you use a High PH soap? and should you polish the vehicle before coating?

[@purityautohygienics]

Nice work Levi. We have been loving Legend in the shop! I installed 2 layers of Legend topped with Sole out the gate on my personal truck in mid April. Seems like this is going to last a long time…

[@VW.907]

Oooo, digging utalizing levi for the voice over.

[@moisesramirez5242]

Do you guys use any DI water when washing?

[@moisesramirez5242]

@@theragcompanywow, that’s a lot of money but you get what you pay for! True professionals🔥🏁

[@U2SuzyQ731]

Lucky owner!!Wish I had done this to my car initially.

[@GDavis49]

Nice work boys! I hope Josh was able to fill the Acura with sushi once you were finished.

[@aaron30569]

what dilution do you guys use for brake buster in the ik foamer? how many ounces of BB and water? please also will you guys be reworking the chenille mitts in the future? i recently came across pro detailer magazine issue 8 and from their testing they found the chenille to be the safest mitt, the one used for testing was 90/10. whats the makeup on yours? no info on your website

[@lukebergey8604]

Brake buster they generally use 10:1. 10oz water for every 1 Oz brake buster

[@GDavis49]

@@lukebergey8604 Thank you for your service.

[@lukebergey8604]

@@GDavis49 🤣🤣🤣

[@stevealonzo6328]

What happens when the coating get in contact with the water during application?

[@lukebergey8604]

As they said in the video... it will basically cause groves in the coating . Basically starts washing off before it got to chemically bond and physically cross link with the paint

[@Archeagle]

You should use a high PH reset shampoo to break down the cellant or wax than do a decontamination even if the car is new. You never know what kind of particles came on it. Than use a IPA solution to remove residue of greace, wax cellant than apply your ceramic coating. I think it's the best way to prep the surface in my opinion.

[@MasterOfShine]

Josh had already done all those steps the night before bringing it in. Did you notice we used a paint prep prior to applying the coating??

[@Archeagle]

@@MasterOfShine ho my bad ;)

[@mynsxt6]

could legend be applied to the glass?

[@MasterOfShine]

Side glasses not windscreen

[@lukebergey8604]

Dang I kinda wish I would have waited on csl exo on my truck and could have done legend

[@mchristian5217]

CSL is easier to use and you get a similar result if you top it with EXO x2. Love it.

[@GDavis49]

We all know you have a 1000 ml of Legend in your garage right now.

[@lukebergey8604]

@@GDavis49 shhhh don't tell anyone

[@1209MArky]

No correction?

[@gregcrezee4071]

So... there was absolutely zero point prep/correction needed at all? Nice vid?

[@SuddenDeathSyndrome]

Wondering if they and Pepsi work together.. 😅

[@sabrina6499]

Nice 👏🏻

[@Tonezorz]

😬 You know I love y'all, but there was only roughly 50 seconds of actual legend application/wipe off footage. I guess this isn't a "How To", but I was hoping for a more detailed look at the application process, what flashing looks like, discussion of how to tell when it's time to wipe off, etc.

[@jeffc6832]

I'm with you man, this video left me wanting more.

[@zrfg4227]

I learned nothing by watching this.

[@qwikss4469]

150% my thoughts. They only care to sell product.

[@GSDadd]

I will never understand why detailers trying to show off or promote a new product, especially a new coating, choose a white car. I’m a huge fan of beadmaker so when Legend came out I have to agree with a previous comment. It is not friendly to southern states in warm, humid climates. The product is marketed for consumer and not the professional detailer. The issue with this is most consumers in the south do not own an indoor climate controlled wash bay. I have applied Legend in the early mornings at the lowest temp possible, but humidity kills Legend and if you live in the south, go with an easier product to apply or wait for the winter dry days.

[@jeffc6832]

Shoot...I was hoping for more details on the actual coating application. What to look for on how/when it flashes, how to prime the pad, how to avoid high spots or what to do if you get one...etc. Anyone considering applying a coating should already have the wash/decon/prep stages down. I still love you guys and you know I'm going to watch...just giving a little feedback for future vids.

[@GDavis49]

Tread lightly, Jeff G gave this video four thumbs up.

[@jeffc6832]

@@GDavis49 😂😂😂

[@jimcarso7541]

Bead maker has a better shine

[@molo8746]

You should consider not making microfiber wash mits and Chenille mits. Only pad style. IMO most people prefer a pad style. Grabbing is much more comfortable. I prefer my mits for baseball.

[@nealwhite1474]

Acura!!!!!

[@Paulog1990]

This car looks too much like a Mazda CX-9. Interior is great though.

[@qwikss4469]

You did nothing more than show products to sell. That’s fine, but the coating install “process” part was a joke.

[@JadeaRS4]

"Hondas and acuras a step above the rest". Lmfao. That's funny. Now in reality.....

[@1stfrompuertorico568]

1st