I’ve been lucky with BU so far. My Divine Belial had no issues, and my High Eternal had no issues. I don’t have Gatling so I can’t say, but hopefully my luck keeps up
@carnagedadvenomcrush52252 жыл бұрын
Do you want to join my cbt
@Yowai1932 жыл бұрын
Hi
@elitEBlader2 жыл бұрын
@@Yowai193 hi
@Unlimited_Burst2 жыл бұрын
But I don't have any string launchers so I've only had this problem once
@kingsleywongzhihong2 жыл бұрын
Goooo EB is here
@TrueBlueAndrew2 жыл бұрын
I was told it was a possible Mold issue. A friend of mine his dragon core teeth were defective and the mold number was A22. I haven’t had any issues mine is E22. I really hope this problem doesn’t persist. Takara Tomy needs to do some better quality control possibly
@AubreyChase72 жыл бұрын
It’s at least better than Hasbro. That stuff is just horrible
@MrsDisenchanted2 жыл бұрын
I got the E22 mold
@jaredashford3572 жыл бұрын
If you try to pull the bey apart as you unclick it, it can apply less pressure on the teeth, which can help with the problem
@YonkoX78648 ай бұрын
But won't that be the problem for the part of the driver that goes under the chip to lock the beyblade Science there is more pressure applied on that
@FadhHC2 жыл бұрын
I've been used my Gatling Dragon BU core with dash drivers (I didn't put it carefully) but it doesn't bended but after watching this video I will be more careful when I use my Gatling Dragon BU core.
@BetraBees2 жыл бұрын
Thank You So Much Zankey. I was about to order Gatling Dragon And I was sure to use it a lot. But then I came across this video. You are a lifesaver.
@anontheiv8600 Жыл бұрын
I have the same problem. One of Gatling's teeth's literally bent because of taking huge hits from Guilty and Xiphoid. The mold's A1 and from what I heard, it has better burst resistance than others. I guess it isn't true most of the time 🤣 (Or is it my fault for battling Gatling to them 🤣). Anyways, great video as always Zankye.
@xzdungun33332 жыл бұрын
I’ve had Gatling for a few days and it’s only taken one click the entire time I have it
@edisonadriano62042 жыл бұрын
What mold is the damage teeth on your dragon db core i need reply ASAP!
@zankye2 жыл бұрын
It affects all molds of Dragon not a specific one, the only difference with Valkyrie cores is later releases had a stronger spring of tension but wear was the same.
@YonkoX78648 ай бұрын
Man I realised this issue after a year oof purchasing gattling dragon . After a year one set of teeth (1 teeth of both sides) completely broken off and I'm left with only 2 clicks now I mostly used this bey in its stock combo
@AyanokojiKiyotaka69962 жыл бұрын
Hi Zankye! Actually.. since you know about beyblades soo much, I want you to test a combo - Blade - Dynamite (White) Core - Valkryrie (from Savior valkyrie) Disc - Nexus Armor - 3 Driver - Evolution dash Gears - F gear and d gear F gear in white colour plz. I want you to make a separate video on this combo on your competitive channel. Thanks.
@ardillo54192 жыл бұрын
Wow, a combo without driver
@alexanderperez78822 жыл бұрын
Lol
@AyanokojiKiyotaka69962 жыл бұрын
@@ardillo5419 just forgot to write.
@sjsapp46572 жыл бұрын
@@ardillo5419 he said evolution dash as the driver
@ardillo54192 жыл бұрын
@@sjsapp4657 he edit it after
@Daniel-pi5dj2 жыл бұрын
I think takara tomy should start releasing teeth with metal so they don’t bend or break easily My greatest Rapheal teeth broke in 2 pieces
@Existingisannoying2 жыл бұрын
bruh that would destroy the burst gimmick and make any bey op the meta would get ruined and teeth with metal would make the bey really heavy
@Daniel-pi5dj2 жыл бұрын
@@Existingisannoying oh
@Existingisannoying2 жыл бұрын
@@Daniel-pi5dj i exaggerated a bit but it would not be a good idea
@jerrygoodman19432 жыл бұрын
My first greatest raphael has a broken wing, and the teeth are worn after 2 weeks of getting it. My second one I bought is a demon, tho
@ardillo54192 жыл бұрын
It would destroy your drivers
@DragoonMS2 жыл бұрын
Judging from the thumbnail of the Dragon Core, it's teeth wear, ain't it? Yup...teeth wear. (WHOA, that thing with High Eternal sucks...maybe they should've tested the waters with a High Revolve first??)
@zankye2 жыл бұрын
I don't think HR should have issues like that I think it's just how eternal is for it to happen
@DragoonMS2 жыл бұрын
@@zankye Interesting. What's the difference between the shaft parts of Revolve & Eternal that the plates connect to? Does Eternal's shaft also spin freely?
@shadowgamerz692411 ай бұрын
Should i buy ultimate Valkyrie or xifoid xcalibur
@icy_mixtures985111 ай бұрын
ultimate for fast hard hits xcalibur for heavy hits and a cool launcher
@shadowgamerz692411 ай бұрын
@@icy_mixtures9851 ohh I see tnx^^
@glorialagurin-fh9xs7 ай бұрын
Xiphoid,it's much stronger than ultimate
@justanotherfoolish2 жыл бұрын
I only have teeth wear on one chip. it’s the cyclone belial. but it’s my fault for keep Survive Metal on it. i’m hoping Xcalibur will be metal driver safe so i can use my Xtreme metal
@zankye2 жыл бұрын
not unless it has longinus teeth
@khansaplaytimegirl113 Жыл бұрын
I have some thing with my gatling to, the gimmick is actualy work but it was unbalance, i dont know why just buy yesterday it was tt and i dont know it was mistake or some thing
@dankura2 жыл бұрын
I was in a hard impasse between gatlin dragon or guilty longinus for about 3 weeks considering and reviewing and I went with guilty I still really want Gatling dragon because of the colors and it was one of my first days back in the day it's just a chunky hefty strong dragon with an insane attack power and it's just overall aesthetically pleasing maybe sometime soon I will get it if it breaks that'd be a huge drag
@LOGXEDITZ2 жыл бұрын
I wish I found out somehow before, because I have the same problem and it’s like half as strong as it was before :(
@makazen2 жыл бұрын
Noted on your advice my dood
@MMoutoo Жыл бұрын
TT should’ve never used triangular teeth on a bound core
@YonkoX78648 ай бұрын
Agreed Mine literally snapped apart
@ryugaknight2 жыл бұрын
This is why the only dash driver I use on Valkyrie 1 (and dragon when I get it) is Bearing’.
@user-dalangtaosha2 жыл бұрын
Its the opposite for my divine it's burst lock doesn't come out lol
@gu1ltyburst7502 жыл бұрын
And thats why blocky teeth are the best ngl
@QueenOfEverythingEverywhere2 жыл бұрын
When is the Xiphoid Excalibur review coming? It is in Amazon rn and it doesn't need to be pre-ordered
@klear22732 жыл бұрын
the bey will be released in japan on July 16
@zankye2 жыл бұрын
It isn't released
@sheevpalpatine61392 жыл бұрын
That's clearly a lie because it isnt even released yet
@njbackdraft2 жыл бұрын
I will order gatling dragon soon! I will order it off of ebay!
@accelerator2.0142 жыл бұрын
(Oh my god in Joseph Joestar)
@joelpepper11882 жыл бұрын
I’ve actually had trouble with my chain kerbeus core where the burst stoppers aren’t making contact with the other parts it’s got really bad burst resistance it’s really sad 😢
@zankye2 жыл бұрын
Chain has high recoil so even on dash you will be bursting in a hard hit
@ynwforro22702 жыл бұрын
for my belial i just put some baby oil on a q-tip and rubbed it onto the burst lock from under the layer. make sure to get it completey in the little circle and with a one time application the bursg lock shouldnt give any more trouble