The NEW Best Laser For Woodworkers // LaserPecker 4 Review

What do you guys think of this awesome new laser?!?!
Get it here: www.kickstarter.com/projects/...
Merch: www.etsy.com/listing/54858480...
Chat with me on Instagram:
@TheReformationWoodshop
TheReformationWoodshop.com
Music:
Somebody New (Instrumental) By RYYZN
Secrets (Instrumental) By RYYZN

[@kristinbonds2135]

Definitely saving for this! Oh, the possibilities!

[@TheReformationWoodshop]

It’s a great investment 👍🏻

[@MKCraftsandFamily]

great video! Looks like an awesome piece to have!

[@TheReformationWoodshop]

Absolutely!

[@dwaynenicely1629]

Thanks for the video great information.

[@TheReformationWoodshop]

Appreciate it!

[@RobinGerritsen1995]

Do you plan on making more videos about the LaserPecker 4? I would like to see a test with the third-party software LightBurn. Also would the IR laser be able to 3d engrave metal parts by adjusting the Z-axis accordingly? This would open up a lot of possibilities for making custom jewelry such as necklaces with 3D pictures. Another thing to consider is the possibility of making holographic effects on metal parts by engraving small lines into metal to diffract light which gives the holographic effect.

[@alwayscensored6871]

A very handy laser. With air assist guys are cutting 19mm of wood on other 20w diode lasers

[@DianHierschel]

Great video! Is it possible with rubber ? I plan making stamps with Laserpecker.

[@RaicoRosenberg]

Thanks for the video Timothy, what pattern was that on the blade called? or where can i fins something similar. many thanks

[@RobinGerritsen1995]

Have you tried to 3D engrave metal or wood? So with Lightburn you can engrave while moving the Z-axis to refocus every layer...

[@mikeguidry49]

Nice review. I’d this lightburn ready? Thanks

[@goslmka]

If possible would like to see some engraving over 3D printed parts (PLA, PETG)

[@jakerazmataz852]

Almost 2 months and not commercially available, I was going to start with the LP 3 and upgrade to the xTool when business started going. This would kill 2 birds, but you can still only use one laser at a time.

[@bonprez9981]

How does it do with HDPE plastic? I bought a cheap laser engraved from Amazon but it took like half an hour to do one pass for a simple 3”x1” word which was disappointing because it wasn’t entirely clean and most likely needed another two passes so I’m curious how this one would do being itll be about 6x more expensive.

[@bradscottberger4662]

Went to the link to try to buy this laserpecker for where do I buy this at if you could tell me I really appreciate it very interested

[@deardiaryco]

Can you try it on gold or silver jewelry? And gold plated silver jewelry?

[@jhug1987]

Awesome vid. On the different metals, how deep does it engrave? Is it more of a surface engraving or is there some depth to it?

[@jakerazmataz852]

From what I've seen, you can catch a nail on it. Of course it probably varies with softer metal. I'm amazed it etches Titanium.

[@MKproSolution]

Can you engrave on a fire@rm slide?

[@TheChicohope]

How soon can I get the laser pecker 4?

[@marcowaters8279]

I'm looking forward to seeing it on Amazon. But in the meantime, what is the result on brass or precious (highly reflective) materials?

[@TheReformationWoodshop]

It can do them really well! This laser was made with those guys in mind.

[@clausziegler5720]

would it engrave brass? I mean brass for reloading ...

[@marvinheemeyer7027]

Как сделать гравировку на серебрянном или золотом кольце?

[@rstamp]

What power for this one?

[@00Motion]

Can I do 6 inch diameter SS tubing?

[@MikeGuschke-he9im]

What is the expected life of this machine tool in terms of mean time between failures?

[@jpamaroautosales5463]

Hey can you hand hold the LP 4 in an upward position? To make walls and pipe above you? Or would the LP 2 be better? I'm engraving steel mostly.

[@TheReformationWoodshop]

Although it’s heavier than the LP2 you can hold that way. The LP2 won’t engrave steel I don’t think.

[@papamrk1343]

So with that Accessory that you used for your daughters rolling pin, does that eleviate the need for the Roller accessory as in for TUMBLERS. Speaking of Tumblers can you do a tutorial on Tumblers? Thanks ! Great video!!

[@donwalborn6687]

I want to engrave my handcrafted Pens (wood, acrylic, antler, etc). Do I need to purchase the rotary attachment for that?

[@TheReformationWoodshop]

If you want to wrap the pens with an engraving, yes. If you just want to put a line of text or something, no.

[@tibbysun]

Do you think it will deep engrave on silver and gold? Or is the 1064nm laser at 2w to weak?

[@TheReformationWoodshop]

It definitely will engrave on silver and gold. I just didn’t have any to test on

[@cristmiller8818]

Can you adjust the depth of the burn? We want to burn on hard maple. Also where do you buy the 4?

[@TheReformationWoodshop]

Yes you can! It comes with depth, power, and resolution settings. It’s available on kickstarter at the link in my description.

[@racheludkoff7239]

Does the laser pecker 4 have a similar function as the "trolley mode" on the laser pecker 2?

[@TheReformationWoodshop]

The trolley mode is substituted with the rolling bed on the 4

[@edgardhtito5299]

Hello , very good your content , I'm looking to buy the same brand LaserPecker LX1 Max model 80 x 40 cm . But I have the doubt because I have also been recommended the Atomstack A20 Max 20w Large Size . And as I am new to this , I would ask you for advice , Thanks in advance.

[@TheReformationWoodshop]

If you’re getting a bigger laser I would look at getting this one (www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=clSNUlHMSPHtmu&)

[@MrDavesbox1]

whats the warranty on this?

[@kennethplatz5843]

How well does this etch hardened steel? ie, a knife blade?

[@TheReformationWoodshop]

It’ll just be a light marking. For a real deep etching you’d need something more powerful

[@thecre8tress]

Hi. Do you have to use their rotary specifically?

[@TheReformationWoodshop]

Yes, I believe so.

[@saberz7406]

Another question is what is the life span of laser

[@JGWed]

how heavy is it? I need to know to travel overseas. And also, would an adaptor be enough to use in Europe? or does it need a converter?

[@TheReformationWoodshop]

It’s a little over 9Lbs and I’m not educated about the plug conversion sorry

[@robiversen3000]

I’m totally new to this technology. How do you aim the laser to hit at the right spot on the object you are printing on? Getting the right angle of the print on the object and so on?

[@TheReformationWoodshop]

The laser has a preview mode so you can make sure it’s exactly where you need it to be. 👍🏻

[@robiversen3000]

@@TheReformationWoodshop I see, thanks for the quick reply :)

[@woodcutter308]

Hopefully better thank the 3. It's inaccurate and support refuses to respond.

[@LordLucian86]

Is the laser pecker 2 solution for long engraving better (the wheel system that could in theory go forever) vs the electric slider. Can you use the LP2 wheel with the LP4, are they compatible?

[@TheReformationWoodshop]

I do like the table a little more than the third axis. I think they work together but just to be sure I’m going to be testing backwards and forwards compatibility soon 👍🏻

[@bneil4059]

@@TheReformationWoodshopwere you able to test trolley mode with LP4?

[@carebear4554]

I didn't see any markings on the knife? Would this tool be able to engrave dog tags and metal jewelry?

[@TheReformationWoodshop]

Yes! Specifically designed for such projects.

[@kevkirahumphries1783]

Is the LP4 compatible with the 3rd axis accessory?

[@TheReformationWoodshop]

As far as I’ve seen it should be. I’m getting ready to do a comparison video of the two and utilize all of the accessories back and forth. I’ll find out for sure!

[@yorkjewelry]

I am interested in buying this product. Can this engrave on gold and silver jewelry?

[@TheReformationWoodshop]

Yes it can!

[@jan97able]

Does the shield fit on the Laserpecker3?

[@TheReformationWoodshop]

I don’t believe it’s compatible

[@Mikedwalker]

That’s actually cheaper than I thought it would be, especially for all that it can do.

[@evobudbrink]

Can the laserpecker 4 be used handheld like the laserpecker 2?

[@TheReformationWoodshop]

Yes. The bottom plate comes out and it can engrave while still on its stand, or you can take the module off and engrave like you would with the LP2 except you’d have to hold it in place because the head is so much bigger it’s not as balanced.

[@evobudbrink]

@The Reformation Woodshop ok thanks. If about half the stuff I'm engraving will be handheld, am I better off with the laserpecker 2 over the laserpecker 4?

[@TheReformationWoodshop]

@@evobudbrink probably the 2. The 4 is bigger and not as easy to maneuver. Although it does do metal so that’s a plus.

[@sergiocuriel4503]

Can it engrave power tools

[@TheReformationWoodshop]

Absolutely! I engraved my name on my belt sander.

[@saberz7406]

Hallo It is possible to engrave on BEACH STONE

[@Quitale-los-cocos]

How deep does it go on metal?

[@TheReformationWoodshop]

It depends on the metal you are engraving and how many passes you take.

[@Quitale-los-cocos]

@@TheReformationWoodshop like on a pew pew

[@RMOR_KNIVES]

Where did you get it?

[@TheReformationWoodshop]

You can get it from their kickstarter. The link is in my bio.

[@RMOR_KNIVES]

@@TheReformationWoodshop how long did it take you to receive the laser?

[@humboldthunterfishfool4817]

Says not guaranteed on the kickstart app?? I want it but I don't want to get scammed. What's up with that box you have to check when running your credit card to pay that says pledge not guaranteed. Sounds like a scam????

[@TheReformationWoodshop]

It’s not, that’s just how the Kickstarter site works. For pledge based projects sometimes the people or product you’re backing doesn’t work out and you don’t end up benefiting from your pledge. In this instance LaserPecker is a trusted source that has done many Kickstarts successfully and people who pledged have already gotten their units. 👍🏻

[@oreochef4537]

I'm sold make a link so you can make some profit for promoting

[@KARMA-vu8ii]

6:24 *You said the penny came out shiny and new, You did not show anything close to a shiny penny.*

[@profitglen]

Yeah, it's not new and shiny. perhaps a little cleaner. It's hard to tell from the video.