That was a awesome restoration of a jet ski water bike, obviously the person's working on it have the skills & tools to get the job done 👍!!!.
@lolikke6 ай бұрын
Have you drunk this us shit not rescue
@NatiaGabunia-pg1ew5 ай бұрын
yvggbfmjđreuf😊
@DeezLouize8 ай бұрын
Nothing worse than watching him rebuild this thing for an hour n a half then finally the time comes to see it rip through the water and he cant go above 2mph for whatever reason. Seems like the engine needed more than just new gaskets.
@Wangan280z8 ай бұрын
Right!? I think he cant get on powerband with that custom exhaust he made, the expansion in the factory pipe in two strokes helps get on the powerband. also the carb may need tuning
@DeezLouize8 ай бұрын
@@Wangan280zIdk for sure cuz I don't know a whole lot about engines but my brother is a mechanic and from what I recall when you pressure test a engine like he's doing here at 41:30 the pressure is supposed to hold. So if I was to guess I'd think it's something internal with the pistons or cylinders. I may be wrong idk u seem to know more about engines then me so ur prolly right. I could definitely see a carburetor being an issue after sitting for all them years in that weather.
@Wangan280z8 ай бұрын
@@DeezLouize now im looking on offerup for one😂 these were awesome when i was a kid, theyre pretty cheap down here in south florida
@mahmodmahsin37957 ай бұрын
I'm
@fkap93717 ай бұрын
Maybe he's just afraid of going faster
@ChristianAmacher8 ай бұрын
Bravo, vraiment un magnifique travail de restauration de toutes les pièces.
@TheCrash19874 ай бұрын
I love watching you guys do work like this, this kind of thing is incredible! We are very wasteful here in the states and I wish society took an approach like you all to recycle and to build things we need rather than to just buy and abandon.
@paoloivam7 ай бұрын
well I have to say it was a good job, but I think it lacks a bit of power, it seems a bit slow to me. great work congratulations
@ctalker-67657 ай бұрын
Да скорость маловата или обкатка движка идёт.
@hessxpress30167 ай бұрын
head gasket is WAY to thick he probably lost a bunch of compression
@James-ce6ic7 ай бұрын
At least it's going that's all that matters
@SL1GHTS_FL1GHTS4 ай бұрын
@@James-ce6icmy jet ski became a submarine like fully sank and it’s fixed and runs 70mph he could do better.
@laserbeam0029 ай бұрын
Very good. That was a great restoration. And I loved the christening of the Jetski. Enjoy and thank you for posting.
@jimydoolittle31297 ай бұрын
Awesome restoration work
@inesrodrigues12778 күн бұрын
❤❤❤❤❤❤❤ tiro o chapéu prá vocês parabéns 🎉🎉🎉🎉🎉🎉🎉
@xLopez210x6 ай бұрын
Definitely love watching the restoration of it all. Great ideas too. 👍🏽
@Frankie--da-fixer8 ай бұрын
Great job,But I was wanting to see you rip it through the water,Because I know it's a lot faster than that:-)
@ianallen28 ай бұрын
His timing is out. If he adjusts it correctly, he will get more speed out of it.
@СергейКиёв-н9ф8 ай бұрын
Это блин единственное что тебя напрягает? Ты серьёзно?!?!?! Ты это называешь хорошей работой.
@1971VoiceoftheMummy8 ай бұрын
@@СергейКиёв-н9ф It was good work. He needs to be rewarded by the true performance of the design and his hard work. It goes 38mph fast, more fun!
@1971VoiceoftheMummy8 ай бұрын
Yea, I was wondering why he was slow trolling around. He hasn't even planed yet to reach full speed.
@Дед-з5щ5 ай бұрын
Сколько смотрю Ваши видосы, у Вас везде по кушерям валяется техника, видно богато живёт народ, но работу сделал качественно.
@MesRevesDeАй бұрын
Bonjour. J ai regardé entièrement cet vidéo. C est une grande leçon de patience. A une époque ou nous jetons tout, vous nous montrez qu avec du courage et du temps en plus de vos compétences certaines ,on peut remettre quasiment a neuf certaines choses que l on croyait bonne pour la destruction. Bravo et respect 👍,ca restera gravé dans mes souvenirs la prochaine fois que je verrais un engin thermique abandonné depuis très longtemps. Merci
@WimarBedoyaPerezАй бұрын
Me gustaría también ver una restauración de su casa. La verdad ustes trabaja genial las restauraciónes de carros y motos. Felicidades y bendiciones saludos desde pereira Colombia. Atentamente wilmar bedoya perrez El Elegido 😊
@South-of-Heaven5 ай бұрын
I also love walking in the jungle and discovering a random jetski.
@AlawaDIYPeltony815 ай бұрын
💪😎☝️ great restoration nice colour
@MdZaferHussain-ts9ff6 ай бұрын
Well done,best restoration of unfunctional motor boat . I appreciate your mechanical skills.Good .
@vinay19196 ай бұрын
Excellent work 👏🏻👏🏻👏🏻👌
@coppermaximus84486 ай бұрын
Awesome job restoring it, after watching the whole video I had to laugh cause his hat reads “Bitch Where” 😂😂 towards the end when he was launching it into the water.
@trailrider01948 ай бұрын
Great video. This brings back memories. I had a 1994 Wave Runner III. I miss it.
@Happyfacehotwheels8 ай бұрын
Was yours really slow too?
@trailrider01948 ай бұрын
@@Happyfacehotwheels No. It really ran quite well. It had a 700cc engine.
@Happyfacehotwheels8 ай бұрын
@@trailrider0194 I was being sarcastic because his was so slow. He should have saved the money from the paint job and the decals and put it towards the engine.
@trailrider01948 ай бұрын
@@Happyfacehotwheels I agree.
@jimydoolittle31297 ай бұрын
Great job 👍👏🏻
@mbahgandung41314 ай бұрын
Very good repair, it's like new again. I really respect his expertise. I hope you'll always be happy. ❤❤❤🎉
@colunaradical-boardsportsd13505 ай бұрын
Very nice job maaaaaaan :-)
@TBird894 ай бұрын
Absolutely amazing and dedicated 👌🏻👍
@SANY196URAL8 ай бұрын
The doctor and the motor🤝💯
@ChristopherMcCormack-w9v8 ай бұрын
The best work I have seen in a while.
@ВадимЛитвиненко-щ7ж8 ай бұрын
Помыл,покрасил,как новое все! Только дырки старые остались.... 😂😂😂😂
@skierbek728 ай бұрын
Он обманывает за милю! Не обманывайтесь бывшими защитниками животных, которых они топили в канализации, заклеивали смолой или засовывали между колесами грузовиков! Помните эти спасательные операции? Это то, что они делали раньше! Но после бурных протестов зрителей, которые начали сомневаться после того, как сотая собака или кошка спасены таким образом, все изменили и теперь спасают водные скутеры, мотоциклы и игрушки! Вот как на этот раз! Это те же люди! В бедной стране в кустах валяется гидроцикл и его никто не берет, только эта шайка жуликов? Мошенничество ! Не любите их, потому что они просто мошенники и воры!
@OLEGIN8 ай бұрын
@@skierbek72совершенно верно
@Vash_Kep7 ай бұрын
@@skierbek72 вы бы сбавили обороты,в чём мошенничество?Автор даже донаты не просит.Может скутер на частной территории был.Или автор должен отчитываться перед вами?Приплели работягу к безумным экоактивистам зачем-то.Если бы у нас приёмок металла не было,то тоже бы никто не брал.Он что,новый или на ходу там стоял?Надеюсь вы не в полиции работаете,а то беда случиться может,когда такие люди как вы там служат.
@ModellerFinder7 ай бұрын
Ебался, ебался, а он нихера не работает! Я на матрасе и то быстрее плаваю)))))
@galaxy_s4samsung7973 ай бұрын
@@Vash_Kepчувачело ты не просек походу фишак , эти вьетнамчата-камбоджата раньше видосики снимали как животинку разную в бедственном состоянии находят и типа спасают , как думаешь каким образом котятки с собачатками оказывались в таких ситуациях что спасать надо ?!!
@Nickwatching7778 ай бұрын
Great job. How long did this restoration take...?
@rickcrabtree79036 ай бұрын
You're doing a good job it looks good
@mariadassuncaodassuncao974 ай бұрын
Very good 🎉🎉🎉 Excellent 🎉🎉🎉🎉
@timberbaldi8675 ай бұрын
Good job bro...good work A++ for you bro..💪💪👍👍👍🔥🔥🔥
@zona-01-na-...3 ай бұрын
Super🙌gold 👍👍🇯🇵
@СергейМиронов-о2з7 ай бұрын
Это действительно водный велосипед. Мощность маленькая. А двигатель сперва нужно обкатать. А на деле молодец мужик, КРАСАВЕЦ!!!
@chriskyle17516 ай бұрын
Что там ОБКАТЫВАТЬ КРОМЕ КОЛЕЦ ПОРШНЕВЫХ?
@Rahamanalimondal9 ай бұрын
Excellent ❤❤❤👍👍👍
@秋原庄次8 ай бұрын
😢
@anthonioscotland18423 ай бұрын
Brand New, out in water 💦 my Boss 👌👌👌👌👌👌
@pachumelyn38147 ай бұрын
Very good job . Hope this yamaha will live with people and great nature .
@rickystephens72539 ай бұрын
Definitely a video for ocd patients! Great job bro, keep up the good work 💪
@Brun-O-Testi8 ай бұрын
Super cool Tu as bien bossé ❤
@marcogiuseppedegaetano8 ай бұрын
Il genio all'opera con un altro dei suoi capolavori. Complimenti bravissimo ciao
@skierbek728 ай бұрын
Sta barando a un miglio di distanza! Non lasciatevi ingannare da questi ex difensori degli animali, che hanno annegato nelle fogne, incollati nel catrame o messi tra le ruote dei camion! Ricordi queste operazioni di salvataggio? Questo è quello che facevano prima! Ma dopo le grandi proteste dei telespettatori che cominciavano ad avere dubbi dopo il centesimo cane o gatto salvato in questo modo, hanno cambiato tutto e adesso salvano moto d'acqua, motociclette e giocattoli! Questa volta è così! Queste sono le stesse persone! In un paese povero, c'è una moto d'acqua abbandonata tra i cespugli e nessuno la prende, solo questa banda di truffatori? Frode ! Non mi piacciono perché sono solo truffatori e ladri!
@elshadaydieo2 ай бұрын
muito bom parabéns show de bola
@MichaelWilliams-vb6wr6 ай бұрын
Fiberglass and everything yall boys aint playing around with it damn good restoration no gloves while sand blasting is crazy got more balls than i do 😮
@dannycroucher54447 ай бұрын
very detailed restoration i did enjoy watching however more of a wave plodder than runner
@rickcrabtree79036 ай бұрын
J hey you done a good job on that man
@leespringthorpe52257 ай бұрын
I was sceptical when I watched you cutting out your head gasket but you did it excellent job 👏
@sreed85704 ай бұрын
I remember the good old days when we could use the proper chemicals and do things ourselves, sadly the US has a federal agency to tell us we can't do many of the things he's doing in this video in our country. Cudos to you my friend, enjoy what little freedoms you still have while you have them.
@anquiressantos48877 ай бұрын
Mano muito bom, teve direito a estouro de champanhe kkk. Confesso que fiquei apreensivo no momento de liga o jet ski e ele não ligava porem no fim deu tudo certo meus Parabéns pelo excelente trabalho degno de um grande profissional...
@Maxdekriek8 ай бұрын
That was a great restoration!!
@RealSuburbanCowboy6 ай бұрын
This was amazing!!
@grzegorzdudzic9546 ай бұрын
Bardzo ładnie. Pozdrawiam 👋🇵🇱🐺
@zayadibatong22038 ай бұрын
Good job broo..👍👍👍
@muhammadasyraf21235 ай бұрын
Padu la bang
@buggsy646 ай бұрын
Wow this was truly impressive.
@julitosnijders36237 ай бұрын
Good work . Lots of dedication. Personal i would try hard to install a new prop. For precise balancing. Thanks for sharing
@4orFun6 ай бұрын
You know what would be so cool if you turned a jetski into a lawnmower that would be awesome dude
@vicentetirakoski33038 ай бұрын
Caramba...Que trabalho,melhor q original...show
@artcabo8242Ай бұрын
Your amazing genius man
@5sInteresting6 ай бұрын
you do this job very well
@bubasnip8 ай бұрын
Great job definitely need to see why it's not making more power, I'd think it should capable of 70kmh minimum. Also need to try get a good impeller. The impeller to pump clearance is way to big, will be losing a bit of speed there too
@DaveBooth-qs7sw8 ай бұрын
Plus the impeller is probably out of balance with all that welding on it! Clearance is vital on jet units! My late father used to overhaul many jet units for high powered jet boats & I watched him a few times !
@ianallen28 ай бұрын
The timing is out as well. That will cause low power. He just put everything back and bolted it down, not setting the timing.
@danwoodward15277 ай бұрын
We had these models when I was a teen in the 90s. That’s definitely not the original engine. The two stroke Yamaha engine was first a 650cc twin cylinder then they made a 700cc (ours in ‘94). Would like to know where that motor came from.
@shartne3 ай бұрын
Pretty colors. Nice.
@ИванИваныч-ц2ъ8 ай бұрын
Очень удивило что поршневые кольца новые поставил!
@wendelmendesteixeira88305 ай бұрын
🎉good job❤
@EtEloraSharmeenАй бұрын
Thanks🌹💐🤝💃🏃♀️🇧🇩
@speedybuggy16778 ай бұрын
I give you five stars ⭐⭐⭐⭐⭐ agrat job 👍👍👍👍👍 I love to see it running again
@BBRCRV7 ай бұрын
С таким успехом, мог только свечи поменять 😂 чем столько времени тратить 🤷🏿♂️
@zl0y5 ай бұрын
Это напоминает если научить пользоваться всеми инструментами обезьяну но не научить как делать нормально)
@cv.bookingvillabandung7 ай бұрын
anda luar biasa bapa👍👍
@PauloPereiraMarquesMarques2 ай бұрын
Bom trabalho, meus parabéns
@johankan37578 ай бұрын
Great job 🎉
@paulmcmain17608 ай бұрын
Excellent restoration
@SkillMasters-vy2lo8 ай бұрын
Beautiful video ❤
@penaestradaconstrucao44928 ай бұрын
Meu amigo ficou muito top meus parabéns 👏👏 você e incrível🇧🇷
@김현호-d7k4 ай бұрын
영상잘봤습니다. 한가지 지적한다면 스크류를 용접해서 복원하는건 영맘에 안드는군요 회전물체를 용접해서 복원한다면 분명 무게중심이 안맞아서 진동이나 다른문제가 발생할여지가 있는대 용접해서 줄로 다듬고 평행도 안보고 수선하는건 문제가 있습니다. 마지막에 강에서 시운전할때 배기구에서 연기올라오는것도 문제가 좀있어보이고요 도색할대 옆에있는 채소에 페인트가루가 날려들어가는것도 보완해야될 사항입니다. 바이크 뿐만아니라 제트스키까지 수선하는 실력은 참 좋군요 😀😃😄
@julkiplialling92888 ай бұрын
Good job ☺️☺️☺️
@MRrwmac3 ай бұрын
Ouch, poisoning the family with the overspray on the corn crop!! Very nice work on the jetski but think you are hoding back on the power for some reason? Hope you get it worked out and stop spraying paint onto the garden crops. Thank You.
@giorgiomartini52466 ай бұрын
I am skeptical… In this country, it is possible to find everywhere abandoned ships, motorcycles, lawnmowers, and many unthinkable object. But what surprises me is that it is possible to find any spare parts you need.... In any case, it is a nice work
@mizinho0126 ай бұрын
Trabalho profissional e maravilhoso,parabéns
@sergeyb7767 ай бұрын
не бит не крашен)))А вообще молодец!
@Fozzie688 ай бұрын
A little bit of tuning and that is a GOOD JOB WELL DONE !! 👌🏴
@cristobalalmarales-q3r29 күн бұрын
Hay de todo menos zapatos, felicidades, restaure sus zapatos será genial.
@carlnewman248 ай бұрын
Wow, that impellor looks brand new, how did you manage to balance it?
@ChucKsor-dm4eq9 ай бұрын
Bạn gioi quá 👍♥️
@johnwhite32187 ай бұрын
Homie loves his silver and red spray paint.
@grzegxyzasd72078 ай бұрын
Wali przez bieżnie w łożyska dupa kwas. Ten cały remont pod film .. kiszka z prądem. I pneumatykiem odkręcał śruby gdzie łby są zatopione w laminacie.... Super robota.... I dokręca w aluminium pneumatykiem ... To jakiś nieuk....
@skierbek728 ай бұрын
Wali oszustwem na kilometr ! Nie dawajcie się oszukiwać tym byłym obrońcom zwierząt , których sami topili w kanałach , przyklejali do smoły czy wkładali między koła cieżarówek ! Pamiętacie te akcje ratunkowe ? Oni wcześniej to właśnie robili ! Ale po wielkich protestach widzów którzy zaczęli mieć wątpliwości po setnym uratowanym w ten sposób psie czy kocie wszystko zmienili i teraz ratują skutery wodne , motocykle czy zabawki ! Tak jest i tym razem ! To są ci sami ludzie ! W biednym kraju leży sobie w krzakach skuter wodny i nikt go nie zabiera tylko ta banda oszustów ? Oszustwo ! Nie lajkujcie im bo to są zwykli oszuści i złodzieje !
@Happyfacehotwheels8 ай бұрын
I don't know if it's you or Google's transolution, but "hitting bearings with ASS ACID" doesn't sound right. 🤣🤣🤣
@grzegxyzasd72078 ай бұрын
@@Happyfacehotwheels to jest Polska przenośnia na pracę niskiej wartości 🤭
@tharanmansell51546 ай бұрын
That's great!! needs propper expansion chamber pipe for more power!!
@AbderahimHaddani8 ай бұрын
THANKIOUPR❤❤❤❤❤❤❤❤❤❤❤❤❤
@richardbarthelme63238 ай бұрын
...wonder what that corn taste like when he's done?
@billykulim52028 ай бұрын
learn from this guy, no WD40 needed opening all those
@tarantasov6 ай бұрын
The best way to feed alligators 😅
@olegmotopilot6 ай бұрын
Чисто случайно шёл с камерой и нашёл то что искал. 😂 у них там в Азии верят в сказки 😂 это как индийское кино....прям всё правда 😂
@koteswararaoch17238 ай бұрын
Super cute brother
@tomre27696 ай бұрын
I love to watch the restoring, but I dont understand why staging the find at the start. One clearly never find stuff, with parts included to just haul away :-)
@izulcalm49144 ай бұрын
Keren bang
@Vash_Kep7 ай бұрын
Привет трудяге из бывшего СССР.Пролетарии всех стран соединяйтесь!Автор.вы молодец,а на злобные комментарии не обращайте внимания,это они не от злости а от тупости)
@магомедцечоев-ь3м6 ай бұрын
Салам всем добрым мужикам, реально этот мужик зверь👍🏼👍🏼👍🏼 удачи ему🫡
@ZivanaSambo5 ай бұрын
Restoration 👍👍👍
@GiápLêPhú2 ай бұрын
Động cơ cần được bảo dưỡng và thay thế đúng mới đạt được uy lực của nó.phần cuối xem gần như động cơ muốn hỏng luôn thì phải
@KuwaittamilGarage6 ай бұрын
Super 🎉🎉🎉🎉🎉🎉
@DuyLe-o5w6 ай бұрын
❤tôi yêu bạn người Việt Nam chân chính.chỉ với những công cụ thô sơ không cần phải có những cỗ máy cồng kềnh người Việt Nam chân chính chúng ta chỉ cần một cái đầu lạnh và sự khéo léo của đôi tay anh trai người Việt Nam đã biến đổi một đống sắt vụn tưởng như vất đi trở thành một kiệt tác của riêng mình.Tôi hãnh diện về anh nhiều lắm, người Việt Nam Thiên tài,xin phép được gọi anh trai như vậy.Tôi yêu anh
@ConservativeUSA678 ай бұрын
Seriously? After all that work thing runs at 5mph no wake speed? 😱
@ИванИванов-и5о7х8 ай бұрын
Super 👍👍👍 💯
@Nikolay_577 ай бұрын
breaking the bottle was great!
@emmanuelkouakou39686 ай бұрын
3:21 As for the propeller, you can also make another one by melting the cans of energy drinks into a mold and then polishing it 1:01:17 How do I know how much force to exert on the bolts or screws with the torque wrench?