Learn how to install Thermoplastic Field Wrap Cone Penetration with Johns Manville.
Пікірлер: 72
@josevera5426 Жыл бұрын
This guy know what hes doing! nice trick to cut a piece with the exact dimensions to wrap the cone avoiding wrinkles
@johnbeamer101 Жыл бұрын
Thank you bro I always wrapped these in two pieces I got it now
@OSCARSanchez-lf7qv7 жыл бұрын
Very well explained detail thanks.
@ashb47363 жыл бұрын
This is really good
@englishboy1012 жыл бұрын
Good job!
@robertsanchez48907 жыл бұрын
That's just my opinion!
@ThePreppyboy2134 жыл бұрын
I thought that target had to be supported membrane ? Not non supported
@paulbarrows51914 жыл бұрын
I'm. With. You. Cover. The. Plates. With. Regular. Material. Then. In. Support. Or. Grab. A. Broom. Lol
@zarathean87583 жыл бұрын
This!
@christophercrone21173 жыл бұрын
All these foreman are doing it differently now days...but usually your right...anything on the field gets field membrane
@christophercrone21173 жыл бұрын
Keep in mind folks if that pipe was vertical and you did a cone wrap you wouldn't want to weld the base first. You would want to use the actual pipe to weld the vertical lap first, or else you will end up welding the vertical lap while it is floating and will melt or void
@izaiahtyler33852 жыл бұрын
Sorry to be so offtopic but does anyone know a trick to get back into an Instagram account?? I somehow lost the password. I love any tips you can offer me!
@coryisrael24062 жыл бұрын
@Izaiah Tyler instablaster :)
@izaiahtyler33852 жыл бұрын
@Cory Israel i really appreciate your reply. I got to the site thru google and I'm in the hacking process now. Seems to take quite some time so I will get back to you later with my results.
@izaiahtyler33852 жыл бұрын
@Cory Israel It did the trick and I actually got access to my account again. I'm so happy! Thanks so much you really help me out :D
@coryisrael24062 жыл бұрын
@Izaiah Tyler happy to help :D
@bedtimeclown5 жыл бұрын
i don't know about ya'll, but i always try weld metal together...even if they are dissimilar
@codyc50752 жыл бұрын
So this wrap only works with cones 5”in diameter or smaller in less you have a 10’ piece of unsupported laying around somewhere because 6” and up you end up way short.
@ericroskos45009 ай бұрын
They got unsecured and 2 foot rolls
@hectornajera95286 жыл бұрын
if you use glue on the cone it turns out better.
@ericroskos45009 ай бұрын
I would make my Target out of field material and it would still have theinch going up the pipe before I feild wrapped it
@MrBiged19687 жыл бұрын
why add 2 when you double diameter?
@xxmobberlobsterxx94005 жыл бұрын
MrBiged1968 to give you a lap to Weld
@boobiemcboobboob2 жыл бұрын
For the lap
@herreragabriel32859 жыл бұрын
Should be 1" 1/2 on lap to weld properly (bottom lap)
@terryquiter82765 жыл бұрын
Not on a pipe
@jesusgamez8526 Жыл бұрын
That should of had been one detail pipe A target on top of that then the part that you’re doing in the end nd it has to be 2 inches lab in bottom
@markbanks23004 жыл бұрын
Lol everything is actually decent, except the fact he didn’t strip the two seems on the horseshoe target patch before welding pipe wrap.
@christophercrone21173 жыл бұрын
I think he used unsupported for the target
@jasonalvarez56973 жыл бұрын
9
@JuanMartinez-uk2ey3 жыл бұрын
First time Rooting 😂😂
@robertsanchez48908 жыл бұрын
In stead of putting two pieces why not get one big patch and cut hole in the middle and pull it over the pipe. less time
@Stupid_you_so_stoopid_UHF7 жыл бұрын
Robert Sanchez he's installing it as if it's not new construction. otherwise yes make a diaper cut it short
@xxmobberlobsterxx94005 жыл бұрын
7:08
@elvinzambrano54003 жыл бұрын
Why are you using detail membrane for target patch? Your inspector always makes me use field membrane my opinion not so good of a trainer
@Stupid_you_so_stoopid_UHF2 жыл бұрын
Thank you...
@kreftingr2 жыл бұрын
Listen to his video really well and you’ll hear how he says that whenever you doing a field wrap. Make sure you use field membrane. We know he’s using unsupported right now. But the reason he’s doing that is it’s easier to show it in a video then the proper way. But on your target piece it’s easier to use unsupported because it will turn better than a field membrane which has string between the layers which prevents a turnup or stretching.
@omarhernandez51386 жыл бұрын
Y un día de estos grabo un video para que mires como se ase mucho mejor y mas fácil y no nomas de eso otras cosas que no en señaste
@MarvinDeezNutz6 жыл бұрын
Omar Hernandez ya?
@josepadilla31266 жыл бұрын
Como le haces tu compa
@edwardrodriguezjr58476 жыл бұрын
Omar Hernandez can u say it in English
@hectornajera95285 жыл бұрын
Yo los hago de esta manera también tu cómo le hases Omar Hernández
@gustavoandresflorezherrera28305 жыл бұрын
No entendes el motivo del porque lo hizo en 2 piezas? Vos solo hablas y nada de nada... bocon
@martinjvillasenor7734 жыл бұрын
Get some better scissors but nice work!
@joeshulman2501 Жыл бұрын
Great video but Id rather just buy the TPO boot from flashco for 30 bucks.
@jimcomstock83288 жыл бұрын
he said two piece because if the pipe was connected you could not slide it over. Thats why you use a single target and make a circle smaller then the pipe and then make a single relief cut to the hole in the middle. use a 4 inch strip to cover the cut. easier then 2 piece. The part i dont see working is with a cone shape pipe without bending the top over to hold the clamp it will just slide off the boot. LIke nikey said it should be 1 1/2 weld not 1/2 on the weld. www.jm.com/content/dam/jm/global/en/commercial-roofing/Flashing%20Details/Single%20Ply/JM%20TPO%20details/T-DV-02.pdf
@randallgilley97064 жыл бұрын
Rookie
@robertsanchez48907 жыл бұрын
All that for one penetration when you can get one 7,8 inch flashing from duro-last and install it faster and better and cut all extra work out!
@darthnatas9533 жыл бұрын
But then you would have to deal with all the crap Durolast puts you through just to buy membrane.
@evanlovesbears2 жыл бұрын
Not to mention how expensive the material is, especially the pre made flashings.
@Stupid_you_so_stoopid_UHF Жыл бұрын
Duracrap
@kreftingr2 жыл бұрын
YOU SHOULD BE WEAR GLOVES AT ALL TIMES
@cbr815riders Жыл бұрын
Damn you took too long to do this plus one piece target should do the job just fine...
@hooflungpoo8757 Жыл бұрын
This video tells me JM is hard up for help. Red flags everywhere in this video.
@bernardoarredondo81973 жыл бұрын
Him dont know bout that lol i make more fast with one piece only😂
@robertsanchez48908 жыл бұрын
That's why duro-last is better!
@Stupid_you_so_stoopid_UHF7 жыл бұрын
Robert Sanchez dura crap lol
@ikon9096 жыл бұрын
Duralast is crap
@ryansayler776 жыл бұрын
Duro-Last is one of the worst membranes out. Not hating, you sound like you know your stuff but, with all their issues and the EPA's impending ban on PVC membranes it's junk.
@terryquiter82765 жыл бұрын
Durolast is for taco bells it's not fm a proved for large roofs. Also it's shit and cracks after a couple years. Non union crap
@darthnatas9533 жыл бұрын
Johns Manville was roofing the world while Durolast was still wetting the bed. Nothing but hype.