Thermostat Saswell SAS908XWHB-7-RF

[EN] Select your prefered subtitle language using the wheel on the bottom right corner of the video.
[SLO] Izberite želene podnapise s pomočjo koleščka v spodnjem desnem delu videa.
Instructions on how to use the digital weekly wireless room thermostat Saswell SAS908XWHB-7-RF with subtitles in english.
Navodila za uporabo digitalnega dnevnega sobnega brezžičnega termostata Saswell SAS908XWHB-7-RF s podnapisi v Slovenščini.
Find out more at www.sen-controls.eu or contact us at [e-mail]
Izvedite več na www.sen-controls.eu ali nas kontaktirajte na [e-mail]

[@nomadplace]

This video save me a lot! Thank you very much buddy

[@xriuk]

Useful video, thanks!

[@sencontrols]

Xriuk, thank you. Check our webiste or contact us directly to [e-mail] if you need any more help regarding Saswell products. Sen Controls d.o.o. team.

[@shotokhan4078]

I want to use the thermostat WITHOUT any program... I just want to use the manual without any schedule which starts at a certain time. How can I do?

[@sencontrols]

Shotokhan, thanks for your question. Yes, of course it's possible to use the SAS908XWHB-7-RF as a regular daily thermostat. You can turn off the heating programs (schedule) in the advanced thermostat settings. Find the "PS1" setting and set it to value "0". By doing this u set the heating schedule to be turned off. See the video instructions starting at kzbin.info/www/bejne/d6m5mWaPe91mhNU Sen Controls d.o.o. team.

[@gaynormainwaring1853]

Where can I buy one of these - the one we had was dropped and there’s no display on it now.

[@sencontrols]

Hi First of all, i'm sorry for such a late reply. I hope you already solved your problem. If you haven't, contact us on info (a) sen-controls.eu with your location information and we might help.

[@gaynormainwaring1853]

@@sencontrols Hello, Thank you so much for your reply - we were thrilled to hear from you. Yes, we want to order a new control unit. We are in the UK. Please can you help us. Thank you.

[@sencontrols]

@@gaynormainwaring1853Hi! Please send us an email at that address.

[@muric85]

Is this thermostat have ability to connect with phone and control with an app? And if yes, how? Btw. Thanks for the solution for Err2.

[@sencontrols]

Hi Elvis. No, if the thermostat model does not include "WIFI" or "APP" in it's name then it's wired or wireless ("RF"). So no, there is no option for app control.

[@dragoljubsoldat3121]

Zasto nema prevoda na Srpskom jeziku.

[@e1men]

hello , i have sas908xwhb-7-rf-app by pressing top left button it doesnt turn the wifi any ideas how to run on the wifi spot on the thermostat?

[@sencontrols]

Hi Tomasz. I'm sorry but we won't be much of help as we don't distribute this model so we don't have much experience with it. But as far as you've explained, you're trying the correct way to change the AP/WIFI mode. Are you trying this while the thermostat is ON or OFF? Try the oposite way… maybe this works?

[@Kizakosmet]

I'm using this appliance for combined floor and wall mount (radiators) heating! Worked perfectly 2 years but after one power cut, connection between this room thermostat and receiver SAS 2010DE can't be establish!? Namely, first 2 months after this it's worked after 5-10 attempts (heating is on 5 min at each attempt ... then on 10th attempt start to work normally) untill next heating off...then all process again. BUT... after another power shortcut isn't able to keep heating more than 5 min! Error displaying as ERR 2 !! By phone service guy told me that softver "gone" and I've to buy whole set; both parts: receiver and thermostat!?! Any help ??

[@sencontrols]

Dear Kuzakosmet, we've talked over email regarding this issue but i'm also replying here. If removing power for a few minutes and reconnecting didn't help and the problem persists, then it's likely that the receiver is malfunctioning and needs to be replaced. In this case, i recommend replacing both devices as newer models were released since your purchase of the thermostat.

[@Kizakosmet]

Thanks a lot on your professional and quick respond !

[@xdrocky5417]

I dont understand the schedule option when i couse day and click P i set time like 2 pm but does i mean it will start working at 2 pm but how to make it like start at 1am and stop at 3am

[@sencontrols]

Hi. The logic behind the heating programs is that the set temperature will stay until the next one is scheduled. This thermostat is fully customizable and the user can set any temperature he wants, not only "heat on / heat off” - at 4 or 6 different hours. So if you want temperature 22°C at 2PM, just set it by the steps we provided in the video. The time is the start of the program and the temperature is the desired temperature. If you have any more questions or need help with the help of your thermostat - contact us at [e-mail], where we’d be glad to help you more. Sen Controls d.o.o. team.

[@xdrocky5417]

@@sencontrols so if i understand right it monday 1 pm now if i put it on monday program 1 2pm temperature 22 it will start working at 2pm and set monday program 2 at 5 pm temperature 23.It will start working and 2 pm with temeprature 22 and keep that temperature till 5 pm.Am i right?

[@sencontrols]

@@xdrocky5417 Hi. To make things a bit more understandable, i made this timeline for 4 daily heating programs. Hope it helps. www.sen-controls.eu/Prenosi/Timeline%20programov%20za%20ogrevanje%20SASWELL.png edit: It shows you on a two day time line, how one day starts and the program continues into next day.

[@dreamless222]

@@sencontrols Thx helped much ✌️✌️

[@AmrikSaini]

Grazie è stato molto utile questo video

[@sencontrols]

You're welcome. If you'll need any more assistance with the thermostat, contact us on [e-mail]

[@katicasebalj3411]

Trebamo na hrvatskom jeziku

[@sencontrols]

Postovani. Upute vama mogu slat na email. Kontaktirajte nas na [e-mail]. Titlovi na hrvatskom su u pripremi.

[@emirkikic2963]

Prevedite na bosanski jezik