THESE ARE THE SYMPTOMS OF BAD CONTROL ARM BUSHINGS ON A CAR

[@AutoRepairGuys]

Products that we use and recommend: ► Control Arm: amzn.to/3n92OML ► Panel Removal Set: amzn.to/3YiMADu ► Assorted Fuses: amzn.to/4fx4s3F ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Castrol Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ► Liqui Moly Engine Flush: amzn.to/3IiDBID ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics

[@goliac492]

Helluva Job guys. You helped me diagnose my Mini Cooper's front suspension issues. The BMW/Mini dealer has been clueless.

[@peterrudy9207]

You could periodically spray 303 Protectant on the rubber bushings . To resist them drying out and cracking . And if already needing replacement , but not having the money right now to replace . Spray AT-205 Reseal on them to swell them up and reduce / eliminate squeeking .

[@xdrifterx2357]

Bro u are clutch for so many of my repairs I hope u much success

[@prveteran]

You're video is awesome. Quick efficient to the point and so critical. Good bless!

[@Justadad10]

Always helpful and informative videos! Never unnecessary talking ty once again 🙌

[@k14ser]

Excellent descriptions thanks

[@dochs6028]

Thank you

[@romeo852]

Nice, no bullshit explanation. However what happens it there is a bad ball joint?

[@pnw.brnn.raised5297]

yes, helpful!

[@karenborghi6202]

Could you help me?Please help, I had my front lower control arm bushings replaced and a 4 wheel alignment done on my 2013 Audi A4 yesterday by a reputable mechanic shop. Today, I was unable to navigate around a curve and had an accident. The car would not go in the direction that I was steering (slightly left) so it kept going straight/right and made me crash into a curb and damage the whole bottom passenger side of the car. The alignment is now really off and it is not safe to drive. How can I tell if was a failure as a result of the work I just had done? What should I do? Should I take it back to the shop and hope that they are honest? Should I file an insurance claim and let them investigate? Could my inability to control the vehicle be a result of of replacing the front lower control arm bushings and/or mechanic error?

[@michaelr.williams8176]

Put oil on the bushing. Twice a year. Never will lose a bushing It keeps it soft They go bad when they. Dry. Rot.and crack

[@Hi.Al.]

Silicon oil !

[@viktorbihar5384]

So, it will make grinding noises when breaking or accelerating? When I'm at constant speed, I don't get the noise, but as soon as I go below 45mph, and break, it makes noise. It's now a bit worse.... it makes noise only sometimes when going over a bump. The weird thing is that when it first started, water would make the noise almost stop. Edit: By water I mean, rain and driving through a puddle.

[@mihairaducu661]

​@@viktorbihar5384 i have exactly the same problem. Same on the rainy days, the sound is gone.

[@davem4131]

I’ve got a VW T6 and I’m getting a harsh ride over rough road. Vibrations in seat and steering wheel floor etc…. Unsteady feeling when driving. No noticeable noises other than twice i heard a pop turning in to car park space. Had 2 engine mounts replaced as it was misdiagnosed and never solved it. Also had top mounts and bearings done. Hopefully this solves it 😢

[@g35127]

i have some clunking noise but no signs of stability issue, could that also be a control arm issue?

[@tcdh31]

Yes, accelerating deccelerating clunking noose

[@jessicah7247]

What's your first language? Very interesting accent. Nice work also.

[@JackKoz204]

Russian you can tell 😂

[@masterofnone7846]

Car vibrates bad also,like bad rotors!

[@arronlowley5659]

what about banging noises when going over bumps in the road? can it cause that.

[@Katherineixchelsalas]

This happens to me too and when I turn or break

[@Brooke00755]

@@Katherineixchelsalas did you figure out what is was? Hv same issue.

[@Katherineixchelsalas]

@@Brooke00755 Yes it was the control arm bushing but I think they call it the radius arm bushing or something like that. Made such a big difference after

[@Brooke00755]

@@Katherineixchelsalas thank you!

[@iliana2578]

This happened to me as well. Figured it was a bad cv joint. Nope, was the control arm.

[@teeman9166]

I don't even understand a word of what you're saying. Are you speaking English?

[@Loiloslos]

So dam annoying guy 😂

[@edwardd8751]

Hard to understand. His English is very poor

[@kbfootballu]

His English is very good. Turn on subtitles