These Toyota TRD Replica Wheels are a game changer

[@cbb976]

I have these wheels on my 4runner and have been very happy with them. Should be noted that at 8" wide and 5mm offset, these still fill out the fender well way better than the stock Toyota TRD wheels which I believe are 7" wide and have offset of 15mm (or so). I really like the stance of these on the 4runner. They also make a new gen TRD tacoma wheel as well... pretty sweet.

[@Alvisr7]

Any issues with sensors of the wheels with these rims? Are they compatible?

[@cbb976]

@@Alvisr7 none. Still love em.

[@Andrew-on5do]

Any issues with vibration? I have them on my Gx and I can’t get my wheel to stop shaking. I’m going to try and put hubcenteic rings on them but there’s almost no difference between the center bore of the wheel and my hub.

[@cbb976]

I never had any issues with them. I did move on to a set of Methods though for extra poke. My vibration issues have been with my tires since the beginning...happened a little with the first set of wheels and with the methods. 4Runners are pretty sensitive to tire pressure from what I heard and a little less pressure for me largely solved it. @@Andrew-on5do

[@Andrew-on5do]

@@cbb976 pressure huh? To high or to low? I’ve tried everything.

[@Nicool333]

If possible I’d love to see a follow up on this video

[@NicHendrix64]

If I bought TRD caps would they go on these rims?

[@snfpagp]

Where do I get the center cap TRD ????

[@handyman5087]

Where do i get the center caps?

[@codygrubb3536]

What did you have to do to get the 285/70/17 to fit and not rub?

[@ashleynoyes5276]

I have these, and i love them. However, I feel like my 4runner pulls to the right to much. Its a 22, never been wrecked, but its been to firestone 3 times this year for an alignment, but it never gets "aligned". Any advice?

[@SmittysWorld]

There are way to many factors for me to give you a accurate prediction, But one thing that I can say is take it to a off road shop over a big name brand even the dealer ship will know more about these then firestone does. The lift kit you have might be the issue as well. Just because the alignment shows its good doesn't mean when they pull it off the rack the wheel hasnt moved from where they set it. Could be rack and pinion issuess.

[@cbb976]

For what it's worth, I have a 23 ORP and it pulls right even after an alignment.

[@boluchhh]

Best advice is to get better quality wheels, these knock offs will always have issues from the factory

[@luiesmaes5333]

I have a 17 Tacoma and it pulls right

[@Jaredius]

Isn’t a more narrow rim better for deflating?

[@SmittysWorld]

Just depends too narrow and too wide can be the same issues

[@rosetta6285]

@SmittysWorld any update on the AGP TRD Pro replica's?

[@Andrew-on5do]

Did yours come with hub centric rings? I’ve had mine balanced 10 times and they still shake my wheel. I ordered the smallest rings I could find to try and get it fixed

[@nolangraves4394]

Did you have any luck with hub rings? Having some shake since I picked up these wheels as well that I am trying to resolve. AGP claims no rings necessary.

[@Andrew-on5do]

@@nolangraves4394 so the smallest rings I could buy still wouldn’t fit. What I did notice though was if I had some work done like an alignment or balance when they put the wheels back on with an impact it always seemed worse. But when I put them on and tightened them by hand star pattern very carefully with a wrench I got no wobble. So, I don’t really know man. Try taking them off one at a time and putting them back on and tightening them by hand very slowly and see if it helps. Seems to have worked for me.

[@nolangraves4394]

@@Andrew-on5do appreciate the quick response! I will definitely try this when I get a chance to see if it helps.

[@Andrew-on5do]

@@nolangraves4394 they have been frustrating for me. I’ve reached out to the company also and I’ve never gotten a response. Mine are 90% better. Hope you can figure yours out.

[@wfthrock]

Do they make these for Toyota Tundra?

[@SmittysWorld]

Yes they do

[@wfthrock]

@@SmittysWorld I want to look into it. I need them for my wonderful condition 2013 Tundra. I think they would be a game changer for my truck.

[@JB-101-gtg]

Updates? How are these holding up? Did you get/find those 3d Prints to link, and how do they look on your buddies Tacoma?

[@SmittysWorld]

Buddies truck got totaled before we could see it. Have not mounted them in the 4Runner yet since wife has almost new nitto grapplers on it still.

[@Alvisr7]

Question man, are the sensors for the wheels compatible with these rims ? I have a toyota tacoma TRD off-road, 21. Thank you!!

[@SmittysWorld]

Yes they are

[@chopperpl]

and where is the follow up video????

[@SmittysWorld]

Havnt made it to installing lift yet been to busy

[@poormansoutdoors.6765]

I'm still waiting for a video with you placing these wheels on your 4runner...

[@SmittysWorld]

Right I want to as well but got to lift it first and the rough country lift I got for it isn’t going on it yet.

[@freddybohnenberger3067]

How do you like them any update??

[@SmittysWorld]

Amazing for such a cheap wheel no complaints

[@teamla8970]

When you have time, post a video up of them on your Tacoma

[@NicHendrix64]

Are these frowned upon?

[@Leshgetit2025]

No

[@codygreene9067]

Who gives a fuck? Buy whatever you want.

[@dharmaboy75]

I think ART is another company that makes a replica style wheels like AGP. ART has +5mm offset. Did you notice any rubbing or issues with your for clearance? I am guessing you had to mod your wheel well area to run a 285

[@SmittysWorld]

Bumper trim is only thing for these if you go bigger you got to do the body mount mod

[@laurentinquinn1668]

Love AGP !

[@laurentinquinn1668]

Nice wheels!

[@BoiseTDI]

These are nice but I prefer the fsw replicas as they come in 16”.

[@d.e.harris3621]

Me too. I prefer the 16” wheel and bigger tires