THESE WERE LONG OVERDUE REPLACING! | FIXED ALL OUR ISSUES? |

In todays video we install new hubs on our 2012 Chevy Tahoe aka Big Betty!!!

[@JamesAutoDude]

Need to use a full scanner to see what the codes are instead of throwing parts at it. Multiple things can cause those lights. Sometimes it's just the check engine light that trips all of them too... need to use a scanner that can access all modules (I recommend a scanner called BlueDriver as it's on the cheaper side and connects to your phone while also giving you access to all modules that other scanners don't), and see exactly what is throwing the codes

[@mitchgriffin]

Commenting to boost this comment so he hopefully sees this. I commented the same thing on the last video because as you said he is just throwing parts at it without having a scanner. The BlueDriver is a must have for anyone working on their own vehicles.

[@JamesAutoDude]

@@mitchgriffin yeah hopefully it's seen! BlueDriver is amazing simply because you can access everything for such a reasonable price. Most scanners are so basic and don't access anything but regular codes, even more expensive ones. You have to pay a considerable amount to get close to BlueDriver lol. Plus the fact it's on your phone and can always have updated information is next to none BlueDriver is game changer for DIY

[@kevinkralicek2113]

No doubt about it, took me about a year to figure it out its the break light switch! 15-20 dollar part fixes all your issues.👍🏻

[@jerryperfect9303]

Probably need to clear the error codes now that you replaced the parts. Usually can do it with a simple code reader.

[@GrizzlyDad_316]

Thing just came right off I am so jealous. Here in New England we gotta beat the dang thing

[@greendeere777]

I had to go get genuine GM hubs to get the lights off along with a lot of my friends, it sucks because they're twice as much as the parts store brands but I can't stand riding around with service lights on! That's just me, I like my stuff right!

[@jckoran8139]

On my 2011 Silverado I had the same lights on and my buddy who owns a shop had to replace the rear speed sensors for the traction control and a sensor in the column right behind the steering wheel for the stabilitrac Hope this helps love the videos man!!

[@IanLt4]

I had this happen on my 08 Sierra it was the brake switch under the dash for me , could also be cause the code needs to be cleared out. Love the content 👍🏻

[@DownSouthSilverado]

Check the wheel speed sensors. My 2012 Sierra did the same thing off and on for a while

[@ZamuraiBeKillin]

really miss the tundra content

[@trentonthecanadian109]

Probably the abs pump module happened on my Sierra

[@jacobpugh6615]

Same here

[@g15942]

May want to check out the abs sensors or the brake light switch. Had a 12 sierra and the brake light switch went out and caused these lights to come on. I know it sounds crazy

[@RichPrivilegedWhiteMale]

It may be a defective time part. Or the truck plug for the wheel speed sensor plug.

[@JacobVolano-ur5vh]

My 2013 Silverado had the same lights and it was a steering angle sensor. It fixed it for probably 2 weeks and now they come on and off every other day or so. You can take it to auto zone and they have a scanner that will tell you what is causing it. I just know nothing is majorly affected so I just drive it.

[@johnnyp5573]

They have an obd2 scanner not a brake scanner

[@sethsnipes408]

The 07 -13 will throw those codes when the abs module has issues. Check the rear speed sensor or sensors. And it could be as well if the alignment it’s correct in specs.

[@mitchgriffin]

Please invest in a BlueDriver so you can scan the codes. It will save you SO MUCH time and is the only possible way to fix the vehicle efficiently. Trying to fix a light that has 100 different things that can make it come on by replacing random parts is a sure way to drain your wallet.

[@mrhighway]

Hey Chase one thing I noticed on the video you need longer brake lines, That brake line look scary is all strengh out.

[@manologonzalez8234]

We need that 1st gen tundra!!!!

[@Infamous558]

Mine was doing the same thing it was the connector in the rear on both sides above the shocks that goes to the stability track

[@philvictor5537]

I just did my driver side front last week

[@lilwolf8239]

My 07 Sierra had these same lights and it was the wheel sensors on rear end

[@user-ju5sr7ht1t]

check your rear abs sensors sometimes when you work in the rear suspension they got unplugged the connection is located right next to the upper shocks bolt

[@LowNSlow5.3]

My Silverado had the same problem, but only after my throttle sensor failed 😳. I fixed that problem and it was still on for a good minute but it’s went away on its own 🤷‍♂️

[@user-ed8zt8mn6g]

Steering angle sensor. If the wheel steering wheel is way off or sensors in rear axle for traction control. One on each axle tube

[@urbanmechanic9254]

The previous models you had to replace the module on the abs pump but im not sure on the newer ones

[@zombie5oh886]

Steering position sensor is notorious for going bad on these! Get a scan tool hooked to it.

[@jordanwade]

Brake switch. Part #SLS450 at O’Reilly…. It like $35 and it fixed my service stabilitrak and and lights. Easy fix just one 10mm bolt on the brake pedal

[@jordanwade]

If you struggle to get the truck out of park and have to mash the brake pedal at times to get it in reverse or drive then I would say I’m 99.9% sure this part would fix it

[@MichaelONeal-tu1rs]

Ik u would've thought it was a wast of cash but I would've put all new parts on as u had most of them off I just done this same thing for a different reason and had to go back in and replace sum stuff so I got new wheel bearings new rotors new pads and calipers the whole nine yards

[@jarredjohnson5394]

When this warning indicator light comes on in the dashboard, this could be an indication of several issues such as faulty wheel speed sensors, a faulty steering angle sensor, a faulty rotational speed sensor or a problem with the steering rack.

[@johnwhitty9069]

Those brake lines are streached tight.

[@charleshunt1394]

Try the ABS pump I ran into the same issue and that was the problem

[@Shallowballow]

Best bodystyle tahoes

[@jacobpugh6615]

Had this problem in my Silverado. Was the ABS pump module causing the problem but the issue is you have to have a diagnostic tool to reprogram it so I had to take mine to the shop to get it done

[@dondraeburns-nm1xk]

Im having the same issues with my 2009 Gmc Yukon Denali

[@whitelivesmatter1982]

My wheel bearing snapped and now I have the same issues I went with Kryptonite hubs and mines are still on as well but you can tell my cords was pulled when it dropped

[@lukejohnson865]

Bring it to the dealer. I have them tell you and you fix it. That’s what I do if I really don’t know what it is.

[@jakeappleton3539]

You may have to disconnect the the battery, disconnect the positive and negative battery terminals, let it stay disconnected for 20 to 30 minutes, doing that clears any Check Engine lights aka codes, sometimes that will work

[@carlhotto6485]

Check the abs sensors in the rear end there’s one on each side I have a 2012 and that’s what was wrong with mine

[@bdtaylor1979]

Try cleaning all the body and frame grounds.

[@camaintloud7580]

Color match front clip on big Clifford

[@thefastclaws0132]

I replaced my rear shocks on my 09 avalanche and I accidentally unplugged my rear passenger side traction control sensor. I’ll check that connector on the rear by tracing the wire to the connector. They’re just like the front where they have one for each side soo maybe the did the same mistake and didn’t catch like I did🤷🏼‍♂️ it’s the thought that counts🤣

[@mandingo6821]

What impact did you get and how do you like it? Do you have a link you can send my way.

[@Povertycab]

i snapped a hub on my old truck and it was a 4x4 and man it was a pain.. betty being a 2wd made this so much easier man. amazing video as always

[@NSG_Sanctio]

Try changing the abs module

[@yeeyeeproductions6074]

My truck has a abs bleed system and if it needs to be bled it throws that light idk if it has that but u can live ok it up and see

[@Silveradols3]

Steering angle sensor maybe

[@lathenhornback003]

My truck has the same exact lights because of my aftermarket gearing it could be regeared and that would cause it

[@scottfunderburk730]

Check your suspension control module, located above the spare tire. It could be bad.

[@jonthelamb4549]

Probably doesn’t have one since it’s not a Denali or high trim like that. I. Assuming you just seen south main autos video as well😂

[@joeyjimenez99]

check the rear abs sensors

[@kylevinson7920]

May seem like a dumb question at this point but have you checked all the fuses? Maybe one is missing or blown?

[@quaylonbordelon2903]

Check into changing the brake sensor I changed the one on my moms 08 suburban and cruise control started working again and stabilitrak went off

[@quaylonbordelon2903]

Brake light switch *

[@scottmaxwell7972]

Run the codes get a scanner that reads abs

[@bigcountry7401]

What is ur exhaust set up on the Tahoe

[@dustinjulian3824]

Brake switch up under the brake pedal is bad think its around 40-60 dollars for it my dads truck did the same we replaced it and the lights went away ur cruise control wont work either if its the pedal switch replace the switch the lights should go away and the cruise control will work

[@HennyTRX3773]

Shoulda hit them heat shield with some spray paint

[@joshdubroc7719]

Check fuses old owner probably pulled fuse to completely turn off stability track or u may have a blown fuse

[@ryanstevens1855]

Take it to autozone and have them scan it

[@redneck4312]

Maybe ur diff fluid needs serviced on big Betty

[@jarredjohnson5394]

To reset the Service Stabilitrak Light, turn the key to the “On” position, press the gas pedal five times within five seconds, and wait for the driver information center to confirm that the system has been reset.

[@Harley.Woodall]

Gonna sound cheap as hell but I got a $50 OBD Scanner from Walmart and it reads every kind of code and it tells you the cause of the code and what the best solution would be

[@b-e-j-dvideos2751]

I have the same issue with my abs light on my cluster. I have new wheel bearings and wires and the fuse isn’t blown, I tried scanning it and it didn’t show a code. So I’m lost!

[@b-e-j-dvideos2751]

(2008 gmc sierra 1500)

[@fpvandgasrc4321]

You need to delete the codes from the ecu. Once everything is fixed Chevy will reset system

[@HennyTRX3773]

Is it ur abs module?

[@user-sx3ht4oj2d]

underhood fuse box fuse 9 is the issue

[@Rich-cp4wo]

Just get a scanner to clear them codes bud

[@joshuacook8006]

You can just clear the codes and the lights will come off

[@charlesmeredith4736]

Check ur fuse

[@juliomoreno5370]

Get a single cab coyote

[@Charliewarren-]

What part of Alabama are you at?

[@Bama_RTMF]

Calera area as far as I know.

[@AndrewM251]

I can drive up with my autel it’ll throughly scan it I’m in Baldwin county

[@collinwob]

Escalade tail lights

[@chandlermills2639]

Clean ure grounds that go to ure frame off

[@TurnThemWheels]

Buy a freaking scan tool!!! Bidirectional

[@DamnYankee77]

Brake switch

[@josephspriggs2715]

Tps

[@leviwaldron4]

First 🤙🏽

[@mnoutdoorsman669]

Gmt 900 2wd junk

[@tonycampbell9797]

Larry content

[@lmfscrew]

It’s coming soon finally

[@lee.guynes]

No

[@05cateye96]

Ik it would be dumb loud but i would love to see larry go catless

[@kolty8970]

im unsubscribing because the zip tie placement is absolutley terrible.

[@franklee9127]

I need to know what exhaust Big Betty has on it, sounds good and I just happen to have a 2010 Z-71 white Tahoe exactly like that one and would like to throw that exhaust on mine... appreciate any help