95-99 Chevy/GMC Tahoe, Suburban, Pickup Driver Bottom Leather Seat Cover Install

[@limited50scla]

Thanks for the steps on removing the seat cover. I have a 2000 Chevy Tahoe Limited. With 2-tone leather seats. I didn't want to spend $200-$250 for just the driver seat, I went to the junk yard and found the same cover. Thank you so much. Spent $17

[@garyjimenez6615]

Great tutorial it was super helpful easy to follow and my seats look great. The only thing I will say is that the hog ring pliers you used are way better than the ones you thought about getting. I got those and the reloading slot gets in the way you can’t get the pliers around enough to make them hold. Got the ones you used and all went great. Thanks again really appreciate the great video.

[@allenshifflette2836]

It been nice to see your new cover being installed to see it being done.

[@lexlas7895]

Not as easy as i thought for one with a seat warmer. Even though i rarely use it, i think i won't leave it out. Great vid guys, thanks.

[@jbgamblin]

What a great video as well as explanation. You guys are really thinking of your customers.

[@kobrameat]

great video. Good use of the top cam for better viewing! Thanks 100

[@robertwood4641]

great video for someone thats never done a seat cover thank you

[@danieln3999]

Don't take the power mechanism out. Just unbolt the seat from the power base and unplug the connectors. Saves you undoing those extra bolts.

[@1towmater1]

Great video, why waste time transferring heater when they burn out way before the cover wears out

[@TheSeatShop]

They do not manufacture that heater anymore so if they still work we showed how to transfer them over.

[@scottmartin6953]

That's not the driver side seat your working on you know lol.

[@LookInDJProduction]

but driver seat is same and offten damaged :D btw good point

[@jameslambeth6763]

Great video, I'm definitely buying from seat shop👍

[@franka.6227]

I don't need to replace the seat cover but need to replace the heating element. (99 Tahoe) From your video it looks impossible without tearing it out. Do you have another video where you are just replacing the heating element?

[@victorthecarguy3126]

Do you think using and iron with a lot of steam would work for a steamer? I was also thinking about a spray bottle with a mist and a heat gun. Thanks for the great video.

[@TheSeatShop]

We would NOT suggest using an iron. It will be too hot and damage the cover. A steamer is the best way to go, if you do not have 1 I would go to a local upholstery shop to see if they can do it for you.

[@victorthecarguy3126]

@@TheSeatShop Thanks, I didn't think about finding an upholstery shop. Have a great day.

[@TheSeatShop]

Yes, we have every cover for this vehicle. We are working on getting all the 2nd row covers up on our website, but until then you are always welcome to give us a call and we can take care of everything over the phone for you. Thanks! The Seat Shop 214-710-2565

[@richardharp4398]

I have a 60/40 front bench for my 99 Chevy 2500 and I cannot find the foam anywhere. Do you sell one?

[@Bondovw]

Did you find anything?

[@jeffs9530]

1999 Silverado the seat belts run through the seat. Therefore you have to remove the seatbelts before even thinking about replacing the seat cover.

[@rickyboyd2919]

I have a cloth 1995 Chevrolet Z-71 Extended Cab with a worn drivers seat that is a 60/40 not bucket. I would like to replace the full front and rear with leather but I don’t think it works over my foam. Alternately I would like to replace the drivers side lower with cloth. I’ve read that the cloth is made to the foam and can’t be replaced. What are my options? Do I have any. I couldn’t see a solution on your website.

[@TheSeatShop]

Hi Ricky and thanks for reaching out, unfortunately, at this time we will not be your solution. There are three reasons why going back that far with cloth is very difficult; 1. The cloth has been discontinued and without that material, we cannot manufacture a single piece to match the rest of your interior. 2. The cloth that was used for your seats was glued onto your foam cushion which makes both the cover and foam one piece and to remove the cover (without experience) will destroy your foam. 3. The process to attach your covers to your foam and then to your seat frame is not an option since neither the foam or the seat frame is set up for this (since gluing the cover was an easier solution). Your solution is going to be a local upholstery shop since they have experience in removing covers and replacing them with a different material. Here is a link to our Nationwide upholstery shop network to see if the nearest shops to you can try and help you out this time around. - www.theseatshop.com/resources/install-locator/

[@isaachodges4001]

Do you have sets for the 1996 chevy silverado? I watched this video, but according to your Website you don't carry them.

[@TheSeatShop]

The best position would be to have the seat as high as possible and in mid way between the forward and rear position. If you have any other questions we can help with, please don't hesitate to give us a call and we'll be happy to help you any way we can! Thanks! Matt The Seat Shop

[@devin513]

How do you take the driver and passenger headrest off these 95-99 Chevy seats? I have a 99 K1500 Suburban and I don't see how to remove these.

[@jacquelineshorter6378]

I need to see how to take the side assemble where the knob to take the panel off for a 98 Lincoln Navigator.

[@carrerag1789]

Is there a video for the top half? I don’t know how to take off the arm rest

[@Blakep7704]

Do you have any sources for my 90 k5 blazer? I am looking for new seat cushion.

[@TheSeatShop]

We are currently doing R&D on the Blazer options but unfortunately, we are just not there yet. R&D can take a bit of time so for a solution right now we would suggest trying one of the upholstery shops in out Nationwide network to see if the nearest ones to you can try and help you out - www.theseatshop.com/resources/install-locator/

[@GMT400Jerome]

Is there a video for the top half of this seat? Also do you sell the foam for the upper half?

[@tejastechman2860]

Very good video guys but constructive criticism for better video DIY instruction get closer with the camera when installing like the hog ring etc.

[@TheSeatShop]

Tejas good point buddy. This was shot a while ago and our video/editing wasn't quite on par! We are working to make better videos for you all. Thanks again and take care.

[@mcervi]

What is the best position to have the seat in before disconnecting the power, considering removal of the 10mm bolts?

[@vileloxter62]

What is the electric double button function on the 98 silverado for?

[@EGOR1100]

How to change leather on hand helper element of seat?

[@triptheroad]

How would I remove a cloth seat cover from the foam without ripping it up

[@TheSeatShop]

Unfortunately, you won't be able to replace the cover without tearing it. The cover is glued to the foam cushion.

[@triptheroad]

@@TheSeatShop I was able to get the fabric up with a little bit of foam torn up with the fabric, but for the most part the seat shape is still there in the foam insert. Can the missing chunks be filled with a foam product?

[@yohon1550]

how do I find out what they call the color of my seats for ordering the correct shade.

[@Bondovw]

The tag in glovebox will have the code.

[@raymondwinkowski7948]

Website to order only has 1999 Suburban LT. Any difference between LT and base base seats?

[@TheSeatShop]

Hey, Raymond thanks for reaching out, the main difference will be in the material that was used for your 99 Suburban. If you would like please send us a picture of your VIN# and a picture of your seats to [e-mail] this way we can get you the right information on your seat options.

[@perrycooper7279]

How to put the top cover on 1995 1999 suburban

[@84montecarlonazi]

Do u sell the fabric also or just cushion can u send link or website catalog thank u

[@TheSeatShop]

Thanks for reaching out, we carry very few cloth options but here is a link to everything we carry www.theseatshop.com/store/vehicle-search/

[@samsampayan211]

Guys you need to wear your SAFETY GOGGLES!

[@barchiola]

where are your seat cover products made?

[@TheSeatShop]

Everything is done in Allen Texas about 20 minutes north of Dallas. If you are near you are welcome to stop by and see the process. Thanks

[@jhh70]

awesome

[@Tbolt1000TForLife]

btw do you have new seat covers for 2nd row seats as well, center fold down armrest and everything?

[@lorettamulkey7508]

Looks like the passenger side seat.

[@jam79car]

fucking awesome!!!!!

[@smoki101010]

Nice .. jop

[@TheSeatShop]

Thanks for the support!

[@Tbolt1000TForLife]

im sorry, but the "Yukon XL" from 1995 to 99 was called the Suburban, it wasn't called the Yukon XL untill 2000 to current

[@erikdoering2920]

how come you only do dodge now??

[@TheSeatShop]

Hi Erik, thanks for reaching out, we actually work on various Makes and Models, what Year/Make/Model are you interested in?

[@defendyourclam1682]

some close ups would've been nice. to be honest, no clue how you did the hog rings at all. Zero. Cheers.