Trimmer Router & 15 Router Bits Cutter. FULLY DETAILED Example Cuts

[@___jazzzminnn5306]

for some reason this video was the best compared to all ther others i watched and didn´t understand. love the demonstration of the bits. this is what i call a a to z - tutorial

[@SujMenon]

Awesome, thank you! 👍

[@naturallydope247]

I agree. I finally feel confident enough to use my router.

[@geoffb108]

Thankyou for demonstrating that the very cheapest palm routers are actually quite ok. There are so many tool snobs who wont even look at budget priced tools. I have a work shop full of cheap tools and manage to make lots of furniture for my house without any problems. If a cheap power tools fails just buy another one it wont break the bank.

[@SujMenon]

Absolutrly, you bet. For a DIY use, these are more than enough

[@70athens]

an Oscar award on how to make a detailed video, short and to the point i also appreciated the honesty part about your mistake well done sir

[@SujMenon]

Haha. Thanks man. You made my day 😁👍

[@7R4dicalized]

Thanks a million for the video- I’m new to woodworking & I’ve never used a router, so this was EXACTLY what I needed to view!

[@SujMenon]

Glad it was useful 👍, and thanks for watching

[@regionsbeyond7336]

Best router video I've seen all night! Thanks so much, so clear, so simple, so informative! Not afraid to show us what a mistake looks like, thanks so much! Cheers from the USA!

[@SujMenon]

Glad it was helpful! Thanks a lot 👍 😁

[@paultyler4001]

I had no idea how to use the trimmer my wife bought me for Christmas. This video saved me! Thank you so much Sir!!

[@SujMenon]

glad it was useful. enjoy the new trimmer 👍

[@glennforman9631]

Dude, this is GREAT! You are not only a talented craftsman, but also a terrific content producer! In this video, you have provided SO MUCH helpful information to viewers like myself. And, your project ideas for woodworkers are inspiring. Thank you, Suj! Thank you!

[@SujMenon]

Wow, thanks for the great and encouraging comment! 😀

[@DenBlackburn]

The video is fantastic, and the fact that you show a mistake makes it even better, no one is perfect and we all make mistakes, but to not edit it out of your video has made your videos one of the best ive seen, thank you very much, as I purchaced one yesterday, going to have a mess with it today, thanks again.

[@SujMenon]

thanks for the great comment. and good luck with the new toy 😃

[@NeilAhearne]

As a complete novice using a router this video is the best for instructions and easiest to follow i have seen so far,

[@SujMenon]

thanks, much appreciated 😀

[@ww89]

It's awesome to see reviews on low end models in such detail. Now I have more understanding on the capability of this model, thanks!

[@SujMenon]

No problem, glad it was helpful 😊 👍

[@michaelschnittker7388]

Your videos are very informative and have a unique charm, your comments are frank and honest, so refreshing.

[@SujMenon]

Thanks for the great comment, buddy 👍😁

[@peterlayzell7245]

Excellent! Non- patronising, encouraging, with great tips to boot.

[@SujMenon]

Much appreciated! Thanks for watching buddy 👍 😀

[@haunthunterify]

Who else “ohhh” and “ahhh” when he flipped the counter to reveal the miter saw?

[@SujMenon]

Haha, thanks bud 👍😁

[@spotoncam3640]

In India it's called "Jugad" (hack). We apply such hacks to overcome resource crunch (land and money) and moreover we are not the world's most populous country 😂

[@Bandits_68]

I had the same reaction. 😮

[@AnthonyClark177]

8:34 Now, I know what you’re talking about.😂😂😂😅.

[@robotmeister009]

clever jugaad

[@hassanmansour2454]

The first video I see about the uses of the bits. Thank you. I bought a router trimmer just like yours for £18 on ebay, I use it on the router table.

[@SujMenon]

Great to hear! 👍😀

[@terrenceganasen257]

Excellent video. Very informative and love the demo. No standing in front of the camera and talking. Loved how you made it look so simple.

[@SujMenon]

Thanks mate 👍😁. Glad it was useful

[@bazajow]

Starting to learn how to use a router. Thank you for explain simply to a layman. Every little helps and I'm sure I will become bit more confident sooner than later.

[@SujMenon]

Glad it was helpful, Asghar. Thanks 👍 😁

[@francisangelico72]

You make it look like it's too simple that i have to rewatch the whole thing after getting started. Nice.

[@SujMenon]

haha, thanks for the comment. :)

[@fontybits]

Excellent explanations & demonstrations. Straightforward and very clearly produced. Thank you. Best wishes from Scotland.

[@SujMenon]

Many thanks! 👍😀

[@mtaur100]

Good info, Suj. The simple router table top at 7:44 by itself was "worth the price of admission" for me. Thanks for posting.

[@SujMenon]

Thanks a lot, bud 👍

[@christophermackey2570]

This is the first video posted by you that I have seen. I like the very clear, easy to understand presentation. Unlike many other woodwork project videos, the viewer doesn't need a workshop with table saw, bandsaw, welding gear, angle grinders, large drill press etc. etc....those videos would put off a beginner, whereas yours encourages one to think 'yeah, let's have a go! I like the way you explained (and even demonstrated) common snags along the way! The only thing I would add is the provision of (even just a clamp on) fence for the simple router table. I'm sure I'll need that to produce nice even and straight results. Thanks!

[@SujMenon]

Thanks Chris. Glad it was useful and thanks for the additional fence tip👍

[@chrisbluck7276]

Thank you for this video. It is the most informative video on the net for a total newbie like me. I've only just got a palm router, I'm making a stock for my air rifle and have never done anything with wood before but you have really helped me so thank you my man. You're an actual legend.

[@SujMenon]

haha, thanks lot bud! 👍 😀

[@6069daryl]

Thanks for this great video - as a newbie this was really helpful and informative, I love how you keep it simple and explain all the details. Thanks Suj!

[@SujMenon]

Thanks Daryl, glad it was useful👍😁

[@edmundnyamupepema]

Thank you so much Suj, very nicely detailed and well thought out project examples. Wish I could like it 1k times

[@SujMenon]

Haha, thanks so much Edmund 😁👍

[@phalypso]

One of the few trim router videos I have watched from start to finish. Also, was impressed with the flip tabe for the miter saw. Well done sir.

[@SujMenon]

Thank you very much! 😁👍

[@theedge1420]

Probably one of the best demonstrations I have seen on KZbin😊. And I have seen Many over the years Thank you so much for the extreme effort you have put in to making this video. Kindest Regards

[@SujMenon]

You're very welcome! thanks for watching 👍😀

[@renoxboakyeacheampong1273]

This is the best video so far, it's precise and easy to comprehend. You are the best

[@SujMenon]

Wow, thanks! 😁

[@JoJoSXMGyal]

Firstly, thank you for this video. As a DIYer I'm only looking to buy inexpensive tools so I would probably never buy a high end router so these videos are highly appreciated. And secondly, when you did that flip for the saw I immediately perked up and subscribed because i don't have a garage and will never have all the fancy tools most of the woodworking channels have but that flip workbench thingy is totally feasible for me!

[@SujMenon]

Hey thanks, Johanna. Glad the video was useful, and good luck with the build 😀 👍

[@reuma7823]

Kia ora from Aotearoa (New Zealand). Wow Suj, thank you so much for this excellent tutorial. I have the exact same router & bits & stumbling across your video, i now feel confident in using my router. You explained everything so well. I also have seen alot of videos but this was the very best for a beginner like me, so thank you again 💓 hope my message finds you & your family well. 100% subscribing!

[@SujMenon]

You are welcome! And thanks for the great comment 😀 👍

[@TraceyHill-z8j]

Thank you for this amazing video. I am a woodshop teacher and I'm looking forward to having this router for my classes.

[@SujMenon]

Wonderful.. Glad it was helpful!

[@nalakapradeep3149]

Your video is very helpful. And the language handling is very clear.❤

[@SujMenon]

Thank you! 😃

[@justsayin4486]

This is the best video I have seen! Great ideas easy simple well explained in easy detail. This video is definitely going in my diy playlist to do soon. Thank you for this video and your time.

[@SujMenon]

Awesome! Thank you! 👍😁

[@mark.bailey]

Great video from someone who obviously uses the tools. Learned loads, thanks for the upload.

[@SujMenon]

Thanks, glad you enjoyed it 👍😀

[@BrainDoc1950]

Just bought a trimmer like this, found your video extremely helpful!

[@SujMenon]

Great to hear! 👍😁

[@TraceyJHill]

This is SO amazingly helpful. I am a woodshop teacher and I really want to purchase this router for my classes. Thank you.

[@SujMenon]

You're very welcome!

[@johnshufelt]

Thank you for this. I just bought a Maktec 370 -- a Makita product and the budget equivalent of the Makita 3709. I'm very pleased with it but am still learning the basics. I believe this Chinese router is based on the same design, but regardless of that I found your introduction very clear and helpful. I subscribed.

[@SujMenon]

Thanks a lot John, glad the video was helpful 👍😁

[@aidornoroh4321]

I am very interested, if I want to buy, what is the procedure .

[@bobbucks]

I just bought mine last week. I plan to make my own bedframes and headboards. This router should do the trick. If it works, kitchen table and coffee tables are next. Can't wait to start

[@SujMenon]

Sounds like a great deal of projects lined up. Good luck 👍 😁

[@scottgaines2677]

Thanks for the video! I'm new to woodworking and this video was very helpful! I enjoyed seeing what each bit produces and the simple projects at the end!

[@SujMenon]

Awesome, thank you! 😊

[@ananona6987]

Excellent and thorough explanation. This is what I wait to get it. Thank you

[@SujMenon]

Glad it was useful, and thanks for watching 👍😁

[@drsureshnarayanan1673]

Hi Suj, I am Dr Suresh. Quite recently I started interest in wood work projects and collected a few power tools, studying and doing small works as a hobby. I found your presentation clear and highly useful.Thank you. I am from Cochin, Kerala.

[@SujMenon]

Ah thanks a lot, Dr Suresh. Incidentally, half of my family is from Kochi, small world!

[@cruithin4773]

Being a newby to routers, this video was very helpful. Great job on it.

[@SujMenon]

Glad it was helpful!

[@robbrown6495]

Enjoyed the video. Want to show the kids how to do engraving, so looking for a cheap router that I won't mind if they kill it. This seems to fit the bill. My favourite part of the video was seeing your bench! Superb.

[@SujMenon]

Haha, thanks for that, Rob. Yes, these ones are cheap and cheerful 😊 👍

[@LedaVining]

Been having a lil router but never used it. Slightly intimidated by it. But this video has given me courage to open that box and start creating edges. Thanks for your help. Great video.

[@SujMenon]

Glad it was helpful. Make sure the work piece is "clamped" down, before routing the edges 👍. And be aware of that initial sudden spin effect when the router is switched on.

[@loktom4068]

The router spinning at very high speed. Do pay extra attention for safety. Especially for fingers, eyes, and lungs, from those very fine wood chips and sharp router bites.

[@Jackie.1001]

GREAT video, thanks a lot Suj!

[@SujMenon]

Thanks bud 👍 😁

[@veritasmanagement18]

Suj...great video...well done. Image quality was great and the entire video was informative and very easy to follow. I can't wait to put my trim router to work.

[@SujMenon]

Thanks a lot 👍😁. Hope you have a great time with the router 👍

[@nirupapillay3574]

Hi Sir. As a beginner, the demo was fantastic. Very much appreciated and free to uTube subscribers. Pls show more smaller project builds. Thank u.

[@SujMenon]

Thanks a lot Nirupa 👍😁. There are a few in my channel. Will try and upload smaller builds

[@MuthukumarT-ik5nn]

Excellent discourse use of router function. Made it look really simple👍👍

[@SujMenon]

Glad it was helpful! thanks for watching pal 😀👍

[@jamesmusgrove9152]

Thanks for this as the basic price router is something most can afford

[@SujMenon]

Cheers James. Glad it was useful 👍 😁

[@MovieMakingMan]

You packed so many great, informative things in your video! I loved your descriptions of router bits, the homemade router mount (perfect!) and router techniques. Thank you so much!

[@SujMenon]

Glad it was useful mate 👍 😁

[@Harleyguy03]

What luck! I'm just starting to make a small planter box. This video was perfect. Also liked that portable trim router table top....Subscribed.

[@SujMenon]

Glad it was helpful! And thanks for the sub 👍😀

[@LawrenceCasey]

Great tutorial Suj. I have just found your site, yes I know, but better late than never. Very informative for the beginner like my self and a few uses you showed are going to help me 100%. Also the way you showed how each bit works was good to see. I have just acquired the work zone router a few weeks ago at a car boot sale with a few router bits. I am now much more confident to try it out. Thank you.

[@SujMenon]

Glad it was helpful! And all the best with the workzone router 👍 😀

[@waynehughes8297]

Good video mate. Very interesting and informative. Thank you for taking the time to do it.👍

[@SujMenon]

My pleasure! 😀👍

[@dannymurphy1779]

Thanks Suj for the great explanation and that planter looks amazing!

[@SujMenon]

Thanks pal 👍 😁

Hello Suj, trimmer; A very good replica of the Makita handheld router. It can be used for hobby work. Smoke at 07:09 and a burnt router tip at the end :-) These tips are for hobby use. Because I use the same tips. I had experienced similar situation. I love the rotating workbench. The cactus pot box was also nice. The square coasters were also nice. nice on both devices but Trimmer seems better. Thank you for the introduction and detailed information. you made a good comparison. Thank you for sharing. See you. stay healthy and happy. Big greetings. Best regards. Your friend Mehmet .

[@SujMenon]

Thanks a lot Mehmet. Yes, definite reasonable model for hobby wood worker. It was fun using it for various projects. Thanks for watching, 😁👍

@@SujMenon 👋👋👋👋👏👏👏👏👏cheers man.

[@andre1987eph]

Thanks for demonstrating the Roman Ogee profile. I received one of those bits in a kit. Your demo gave me an idea to use this bit to edge my next wood sign project 👍

[@SujMenon]

Glad it was useful 👍, and thanks for watching 😁

[@1961gfb]

Merci pour vos émissions. Continuer votre bon travail!

[@Gungho1a]

Good vid. I appreciate that you leave in your mistakes...we learn more from the mistakes made than displays of excellence.

[@SujMenon]

Thanks, I appreciate that! 🙏

[@rowena11ful]

Thankyou for a very informative video, have just bought a router and now excited to start using it on my wood crafts. Oh and love the flip counter with the miter 😊

[@SujMenon]

Wonderful! Thanks 👍 😊

[@miketrew9715]

Thank you for your help with setting up router guide plates etc very informative I bought this router but the information on use was very basic thank you again Greetings fae Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@SujMenon]

Glad it helped, bud. thanks for watching 👍😀

[@mitchferguson4102]

So you not only explained things perfectly but you also showed us what NOT to do which is always helpful. It’s like weight loss they always show ppl who are just about anorexic lol so thank you for being real. Now because of this you got a like and a new subscriber lol.

[@SujMenon]

Haha, thanks very much. Much appreciated 🙏 ☺️

[@sumosprojects]

G’day Suj, you’ve put about 10 videos into 1 here & this one has been nice viewing mate. Roman Ogee creates somewhat an elaborate finish in my opinion. Looking forward to the next instalment of videos you’ve got cooking up mate 🍻👍👍👍👍

[@SujMenon]

Thanks Dirk. Yes roman ogee is a great finish indeed. I did jam pack a few things in the video, so as not to spend too much time editing, lol. Inital draft footage was around 35 mins long, which i cut to almost half. Haha 😁👍

[@sadiqlathram4883]

I just recived my router as same as this one with the same pits u show us here. I know its for just small user like e but i realy like to learn how to use it. Thank u so much for the info so much.

[@SujMenon]

Sadiq, thanks for sharing. Hope it works great for your intended projects 👍😀

[@LandonVongogh]

I’m glad I came across your vid. Learned some valuable tips. Great job 👍

[@SujMenon]

Thank you for the comment 😊

[@ayman4021]

Short complete informative video for all wood trimmer router related .Thank you ..

[@SujMenon]

Thanks for the feedback 👍😁

[@georgiee00]

thank you so much for putting time into making such a great video ! i saw this unbranded router on ebay and had no idea how itd compare to say, a ryobi. this cheap router seems like it holds up for a home hobby studio :)👍

[@SujMenon]

You're so welcome! But just a word of warning that they aren't the greatest of quality, though 👍😊

[@therookiefisherman5234]

Thanks for the video I'm learning how to use a router and you have very very good information, I noticed that you did not explain how deep to put the bit in the router and I really love how you have your saw under the table and just flip it.

[@SujMenon]

Glad it was helpful! And good that you bought the topic about the height of the bit in the router. I completely missed that, haha. I usually put around 75% of the shank of the router bit inside the collet. I believe anything over 50% is good. The key thing as you already know, is to make sure that the collet has sufficient grip on the shank of the router bit.

[@therookiefisherman5234]

@@SujMenon Thanks

[@AnthonyClark177]

I’m in awe at 8:34. That’s excellent.

[@SujMenon]

Thanks bud 👍 😁

[@philgoesfishing]

Great video. Really useful and been trying to find a video like this for a while. Thanks!

[@SujMenon]

Thanks a lot, Phil 👍 😁

[@musicifly]

so glad I found your channel. I love the content!

[@SujMenon]

Glad you enjoy it! Thanks 😁

[@alvafelix4539]

Great explanation straight to the point easy to understand good job

[@SujMenon]

cheers pal, glad it was useful 👍

[@snappo20]

Great video - I just bought this exact set for my girlfriend, she’ll be very happy with this!

[@SujMenon]

Fantastic!

[@snappo20]

@@SujMenon have you noticed the adjuster for the guide fence being a bit loose, seems very hard to get the thing tight enough to stop it sliding?

[@SujMenon]

@@snappo20 mine was ok, but if the screw thread doesn’t seems proper, it might be better to send it back.

[@GmanfromTexas]

This video is awesome. I’m starting to learn how to use a router. A little intimidating. Your video helped me a lot. Thanks

[@SujMenon]

Thanks bud, glad it was useful 👍 😀 . Ask the best

[@philipfraser8723]

Thank you so much for this, that router looks perfect for my needs, great video and very well explained, now a subscriber

[@SujMenon]

Awesome, and thanks for the sub! 👍😁

[@philipfraser8723]

@@SujMenon having watched your video four times now I have finally went and bought the same router and router bits. Cannot wait to try it out.

[@sidhva]

Hahaha did anyone else catch the joke at 1:21. "Lefty tighty, righty loosey".

[@MalcolmMXTaylor]

Great video!! I just got a router and had no idea how to use it so this is perfect!!

[@SujMenon]

Glad I could help!

[@naturallydope247]

This video is gold and just what I needed to be excited to use my router. Thank you for explaining what the bits do too. I’m off to go spend more $ now. 😅😩

[@SujMenon]

Cheers mate. Thanks for the great feedback 👍😁

[@user-cv4on5lp6f]

I just bought that same machine, delighted to see it's not that bad 😅

[@SujMenon]

Cheers bud. Its not bad at all. But just a heads-up, it is not that great either for long use.

[@billyblackie9417]

Thank you very good video and great to see you set the router up for use on jig and clamp to bench so you can use hands moving timber across it and as a new person I will now have better view of the item being routed and now can see where I may be going right or wrong and get to try out the other bits so I see the uses better. Great job thank you so much

[@SujMenon]

No problem, thanks very much 👍😁

[@minxer1980]

I love your sense of creativity. I'm a beginner. I wanna learn how to use this router more, I have one. I wanna make canvas stretcher bars. I think my straight bits are too big for it.

[@SujMenon]

Thanks for watching 👍. I sense there is a question in there about the router bit that you used to make your canvas stretcher bar, but unfortunately, I don't know about those. I assume you may need a dedicated/specific bit to cut out that corner profile, and you might need a 45 degree router table sled as well. Sorry couldn't be of anymore help!

[@ADHDIYuk]

I bought exactly this one yesterday. Need to learn to use it properly.

[@SujMenon]

👍

[@KLNYC]

Roman Ogee okay thank you sir. I was searching all over the YT and couldn't find it. thank you

[@SujMenon]

Glad it was useful 👍

[@fingerbass915]

Great to watch, nice little video,,, keep up the good work 👍🏻👍🏻

[@SujMenon]

Thanks for the watch and comment 😀👍

[@FixitFingers]

Nice router basics video Suj. Lawn looks great too 😊

[@SujMenon]

Haha, James. The lawn got trimmed as well. Thanks for watching 😁👍

[@patcummins6036]

Yeah! That got a “WOW” outta me for sure!

[@SujMenon]

thanks bud 👍 😀

[@TheUrantia001]

Good video quality....editing etc..no messing around..valuable info...much appreciated..looks like you need some extra overhead lighting though, makes a difference...:-)

[@SujMenon]

Haha thanks pal, yes, lighting has always been bugging me in my garage.

[@hoctrimededebutry8655]

Hello from France !! Very good test and review 😉

[@SujMenon]

Hey, thanks for watching!

[@LonghornWorkshop]

Nice review mate, I like that they give you the bits as well. It’s great for a beginner woodworker.

[@SujMenon]

Cheers Harki, yes its decent enough for beginners. Thanks for watching buddy 😁👍

[@johnnerding8551]

Simple and precise - thank you.

[@SujMenon]

Glad it was helpful!

[@paulhamilton9411]

Love this video! Can’t wait to view your others.

[@SujMenon]

Yay! Thank you once again!

[@littleliftera8244]

Great video. Quick and to the point with full of information thanks!,

[@SujMenon]

Thanks 👍 😊

[@MrUTuber001]

Thank you so much. I've never used a router before and this really helped. (Micky)

[@SujMenon]

Glad it helped! Good luck with your projects 👍😀

[@TheNaruto2314]

The best video for hand router. Thank you

[@SujMenon]

Glad it helped 👍

[@lilcheat3]

Great video! I bought a small hand router a lot like the one featured in your video, and this gives me great examples of what I can do with it. I just DIY for the sake of home improvement so it is great to see a good beginner video with plenty of ideas I can make use of. Keep up the great work!

[@SujMenon]

Cheers Marcus 😁👍. Nothing better than DIY'ing. Glad you enjoyed the video 👍

[@damienolive2185]

Excellent video, very informative and helpful 👍🏾

[@SujMenon]

Glad it was helpful! Thanks 😊

[@pakde8002]

This was very helpful as I've never used a mini router. I just bought a "Modern" brand profile trimmer (model M2700 440 watts /3000 rpm) here in Indonesia. It seems to be fairly sturdy and has the same accessories as the first trimmer in your video, however i had to buy the set if bits separately. No bits were included with the trimmer which I found a bit odd but apparently that's the way it's marketed. Subscribed 🙏

[@SujMenon]

Glad it helped. Yes, the bits are NOT generally included, unless they say so.

[@mohammadawan3777]

Thank you 😊 for an amazing video from which I learnt so much. Much appreciated, thank you😊

[@SujMenon]

Thanks for the great feedback, Mohammad 👍😁

[@SevenDaysToNoon]

Great video. Loving your easygoing style! 👍

[@SujMenon]

Thanks bud 👍

[@shaunmichaels6801]

I really enjoyed your review and presentation and so I gave you a thumbs up and subscribed.I also liked your homemade router table idea,I hadn't thought of that, perhaps you could build one of these as a project 😊👍

[@SujMenon]

Awesome, thank you! Thanks for the suggestion as well. There is 1 planned for future 👍😁

[@Marz-px6vx]

I seen quit a few of these videos and everyone doesn't give it a chance and they count it out and really using it improper and pretty much portray it as crap. But you used it good and had pretty good results cause you used it right . So thanks I might purchase one now.

[@SujMenon]

Awesome, thanks a lot bud 👍 😀

[@gastonroulstone5025]

Great video. I just bought a small Mikita and found this very useful

[@SujMenon]

Thanks 👍😁. Good luck with the router. Makita's are great piece of kit.

[@devswarring383]

Awesome very explained all bits great work man

[@SujMenon]

Thanks pal 👍😁