7731: Broken Glow Plug Tip Puller Master Kit M8, M9 & M10

Glow plug failed? You're going to have to remove it, hopefully in one piece. If the glow plug breaks because the tip is seized in the cylinder head, then the Laser 7731 kit has been designed to help you extract this broken tip.
The kit includes unique extended drill bits with crimped and welded ends for increased access and a built in depth control collar to ensure the maximum depth cannot be exceeded. Using specially machined thread taps, crimped and welded to extra-long extensions for increased access.
For more information please visit:
www.lasertools.co.uk/product/...
#newtools #LaserTools

[@ldservicesltd595]

Overkill, simply remove the injector and tap the broken tip into the cylinder. You can then remove the broken tip through the injector port with a magnetic flexy probe.

[@ALKUKES]

And the price for this tool £909.32 ex VAT £1091.18 inc VAT

[@Rajputfamily008]

Very smart and secure way 👏

[@sakiringulu]

Nice

[@silverfach]

Looks really useful

[@joshuamoore24_7]

This kit is more for if the glow plug snaps between the hex socket and the threads. If the tip of the glow plug snapped it would take pulling the cylinder head off to get it out.

[@andyvan5692]

nice piece of keyhole surgery mate, should have gone into bone reconstruction 🙂

[@johnnysood3997]

I believe a strong long magnetic rod will earlier remove the broken plug

[@charlietango1635]

Nice bit of kit, but far too expensive. (£800.00)

[@tondokmambelamambela9878]

Gimana dengan harganya..

[@hilarypearl]

Hm

[@tonygarvey8148]

No chance that will work on a 1.6hdi unless you remove the engine

[@ianworthington678]

Definitely works used it myself on a c4 picasso took a lot of Access stripping down but got the job done 👍

[@Jonodrew1286]

I have done a few - but not with this kit - the Citroen Berlingo / Mini cooper / ford / mazda and peugeot, it is a ball ache - the egr can needs removing first but only the two exhaust clips not the water hoses - they are tight but doable - expect spending an hour a tip plus time for the necessary removal of injector loom and plugs to make the necessary space….. before you begin