Feniex 4 Output Flasher || Product Feature

[@iDoThingsOutdoors]

Question, so say I have a dual color light module. If I place that light to a simple alternating back and forth pattern would this unit flash both colors? Could you guys do a video on the feniex flasher with maybe some Fenix surface mounts?

[@UltraBrightLightz]

The light is not able to do both colors at the same time - it would still alternate. We are working on making more videos using the 4 Output Flasher!

[@chrisk164]

Why does everyone do videos on this product with external lights and not existing vehicles lights like led tails etc...

[@UltraBrightLightz]

There is a video where someone installed the Feniex Flasher on a white Jeep and it is hooked up to flash the headlights

[@xElemeno]

Could you hook up whelen ions to it?

[@UltraBrightLightz]

Yes

[@chrisk164]

So if you want to connect to led tail lights do you t-tap into existing power or ground of vehicles tail lights ?or does existing tail light need to be cut from vehicles wiring and ran thru module?stand alone lights I get NP. BUT that diagram feniex gives doesn't explain existing vehicles lights...any help would be greatly appreciated

[@UltraBrightLightz]

Your best option will be to speak to someone at Feniex in their Technical Support Department.They will be able to answer your question! 1-800-615-8350

[@justintracy1374]

Same question

[@shawnsilk2891]

​@justintracy1374 you would need to cut the factory harness and run the light feed through the feniex flasher

[@HAMMER_2.2]

How is the steady burn feature activated? Would it be programmed to one of the 3 mode terminals? So for instance, can i have one switch to turn the lights on 'steady', and then another switch to turn them on as strobes?

[@UltraBrightLightz]

Yes that is correct!

[@realtyrocks1969]

Would this work to put a wig wag pattern on my hazzard lights of a 2023 Hyundai Venue?

[@UltraBrightLightz]

Yes!

[@Mati12ful]

Can i use this to install a headlight wig wag for my 2016 hyundai tucson?

[@UltraBrightLightz]

Yes!

[@Bailey11298]

Hi I have a question I've got one flasher and I want to get another one and connect them up together will they sync up with each other or no

[@UltraBrightLightz]

Yes you can do that! Here is how:To synchronize more than one Flasher unit, activate the same flash pattern on all units and connect the ‘Pattern Changer / Sync’ terminals together.

[@1Martyn1]

How many channel’s does it have? The im hoping i can run anywhere from 2-4 lights per channel. Im also planning to try and run the manufacture lights for f possible but im hoping i can find a device that will over ride the manufacture lights at night and will still turn in during the day when my manufacture lights dont need to be used.

[@UltraBrightLightz]

There are four outputs rated at 5amps each!

[@brianmessier5411]

Is it possible to control dual color lights with this module? For example I have white/red Strobes n more E4, but I am unsure if its possible to sync 4 of these E4 lights with this module, and I cannot find an answer anywhere.

[@UltraBrightLightz]

I am not sure but I have reached out to my Feniex Representative for an answer.As soon as I hear back from him I will post his answer!

[@UltraBrightLightz]

Our Feniex Representative replied back to me.Here is what he said " You should be able to sync other manufacturers' lights with our flasher no problem! It may not work with the SNM lights, but generally speaking, I haven't found a single light it doesn't work with yet!"

[@marcusroberge8826]

I’m trying to find light heads to use with this flash controller besides white work lights. I’m a firefighter so I’m looking for red and white light heads. I’ve tried a wide variety of different brand surface mounts that have internal flasher controllers but they do not work I can not find any light heads that do not contain the internal flash controller. I want to use the steady burn mode.

[@chrisk164]

That should work on any light head,internal flasher or not..I know they work with feniex t3's, cannons,fusions

[@UltraBrightLightz]

Sorry I am not too sure who makes lights that do not have a flasher in them for emergency vehicle use

[@terkenalgt7939]

Hi, may i know the steps to install it on tail light?

[@UltraBrightLightz]

No problem! Please click on this link:www.ultrabrightlightz.com/content/Manuals/2020/4xFlasherManual-v2-0.pdf

[@StormChaserChris]

Are the V3 Fusion Surface Mounts compatible with this flasher if they are on a steady burn pattern?

[@UltraBrightLightz]

The Feniex 4 Output Flasher is made for lights that do not have a built in flasher so it would not work with the Fusion Surface Mount Lights

[@robsmith2523]

That is not true! I placed 8 Fusion Surface Lights and Strobes N' More TailGator Taillight all on steady mode. All lights work with different flash patterns using this flasher.

[@D.D.REAPER]

Does this flasher have Traffic advisor arrow capability? Like if i get single surface mounts and hook them up will it give me traffic advisor patterns with individual T3 for example . im doing an all feniex setup and im trying to cut cost of buy the expensive lightbars

[@UltraBrightLightz]

The T3's have built in patterns so the 4 Output Flasher is not really needed for that setup

[@D.D.REAPER]

@@UltraBrightLightz so if i didnt want to get a stick i could just get several t3 and spread them out and they would work traffic arrows?

[@UltraBrightLightz]

@@D.D.REAPER I think you would have a hard time syncing them to do that so a stick light would be better

[@D.D.REAPER]

@@UltraBrightLightz gotcha i was going with a stick if i couldnt do that . i appreciate your help

[@UltraBrightLightz]

@@D.D.REAPER You're welcome!

[@pnwtundra07]

Need a flash Pattern video there is none to be found

[@UltraBrightLightz]

We are always working on new videos! Please stay tuned!

[@commanderhall848]

Can this be used on headlights and taillights?

[@UltraBrightLightz]

Yes!

[@commanderhall848]

@@UltraBrightLightz thanks so one flasher would be able to connect to both headlights and taillights and then connect to a switch to turn on and off with rest of my emergency lights on vehicle?

[@UltraBrightLightz]

@@commanderhall848 You will need one flasher for the headlights and a second flasher for the taillights.You will then be able to connect it to a switch so they turn on with the rest of your lights

[@commanderhall848]

@@UltraBrightLightz are there any other flashers that can be used on both headlights and taillights together?

[@UltraBrightLightz]

@@commanderhall848 We do not have one that can be used for both.We have been told by our Feniex Representative that using 2 is the best way to install it

[@xElemeno]

What happened to Justin? Not being mean but I liked him better.

[@UltraBrightLightz]

Justin is here! He is just working on other projects