''The Mandalorian" T-Visor/Head Pad Harness Installation

[@heatherdunning7435]

If you flip the t-visor template upside down on the grinding shield so the top of the T is a the bottom you can avoid the stenciling all together

[@claroclarito6430]

yes!! the same i see here

[@crazylegsmurphy]

I was watching this saying, "Dude! Flip the Bish!"

[@xposhr]

lol ya i was like...ummm

[@blackc1479]

Was gonna say the same. O'ya!

[@virgilemothe3052]

This is the most beautiful helmet i ever seen

[@erissroc]

You are killing it man. I found your site last week and have watched every episode. Would be nice to hear a little about your background. Cosplay, SW fan, hot rods, etc... Keep up the great work.

[@RebDoesStuff]

Agreed

[@tylerrandle7245]

I would really like him to make a cameo in a episode of The Mandalorian, I feel that he has earned his signet. 🛡

[@Slamdoxicalz]

in Season 2 the lady crafting the armor will take off her helmet and she'll have his face ^^

[@sox1264]

@@Slamdoxicalz This is not the way

[@Slamdoxicalz]

@@sox1264 xD

[@JoshuaLivesOfficial]

No he hasn't he didn't even make it properly he made the shitty amazon version basically

[@micah3030]

JOSH LAMBERT oh I’m sure you could make a better one.

[@BenderRodriguezBender]

A Helmet made of metal is remarkable. Very good job. You must have a very well equipped workshop :)

[@locke45]

This is definitely the best crafted Mando Helmet i've seen so far!

[@stoner_pinky]

The production quality of this channel is 10/10!

[@KevinLe]

This was exactly what i was looking for and more!!! Thank you for this detailed tutorial!!!

[@ciaranrickard7765]

You know I'm sitting here envying this man, not only has he created one of his own helmets that looks like an EXACT replica, he also doesn't have the struggle of helmet hair! for me once I put a hat/helmet or anything that goes on my head, it wont come off...…ok I will refuse to remove it.

[@barrysmith916]

Hands down best build on the web .

[@Bring3rofD3ath]

How does this dude not have a bigger following and more views? Absolutely amazing and astonishing what your able to do brother keep at it and hopefully you will get seen!

[@thejeepbountyhunter]

Using velcro to mount the headstrap. Great idea

[@cjay1262]

CRAZEEE.! Incredible work mate. Thanks for sharing.!!!!

[@sydekontrol2330]

such solid construction, you could add a pin camera and ear piece with mic on this easily hidden.

[@PEZ1514]

I suggest a rubber well nut to hold the harness. Also cheek pads would help stabilize the helmet even more. Regardless this is super cool though and you sharing your workflow is awesome!!

[@tonyborgos5513]

Thank you so much for your vid.it was so great loved it. going to watch it again. God bless.

[@nickwoo2]

Sweet I want to make a bronze Corinthian helmet and I was wonder what to use as suspention

[@lordmugglestone]

Thank you...That's was very informative...better than using foam blocks. The visor cutout was very informative also for me.

[@tigermoses]

really appreciate the LINKS!

[@paulmurphy5496]

How much larger of a helmet would I need to accommodate the space on the inside that the pads would take up?

[@lindamuvic8110]

Thanks great demo video.

[@forceghostmarty]

you could also use some thick foam so it fits like a motorcycle helmet

[@satsukiyatouji4720]

Thanks for your time and work. It will really helps others.

[@anthonygomez2318]

Enjoy all yr videos I’m a welder myself Great work on everything you do I’ve have the helmet using yr template but on form. Came out amazing!

[@whatchuptu]

Looks a-mazing....and more importantly comfortable.

[@fatjesus2911]

How about the bolt sticking out? if someone kicks you in the head being a jerk and the bolt that is velcro inside the helmet can impale your skull? What can you do to eliminate that possibility?

[@Pathoking]

Please install a voice speaker and mic that would be the icing on the cake!

[@PropsToHistory]

Nicely done. Never thought to use the welding shield material

[@SuperA7xman]

So I need some advice I have a Mandalorian heavy infantry 3D printed helmet could you possibly give me a few steps of how to smooth it out what to use so I can paint it and make it look amazing do I use what they call final fill or what do I use on the helmet to fill in the creases and stuff from the 3D printing and sand it and smooth it out I don't really want to use Bondo or anything like that could you help me with a little advice this is my first bucket project and my first Mandalorian cosplay

[@samparrish4870]

Very quick question what is that piece at the bottom of the helmet where the visor goes? As mine doesn’t have one of those

[@cactusman0403]

Will you make the weapon and the jetpack too?

[@theweldinggeek]

I would like to if I can pull it off

[@ninus17]

@@theweldinggeek you still have to make the gauntlets right ?

[@NEXGENALLSTAR]

@@theweldinggeek Do you sell these?

[@jedi0220]

Thanks again Matt. Excellent tips as always! :-)

[@michaelmeyer8016]

Very very nice Work 😉👍

[@DarthDregan]

Thank you for sharing Sir. Will you make a video on installing the voice box for the helmet?

[@seanrabin]

Any updated recommendations for the harness? This one is not available for some time now.

[@ninus17]

instead of using the sharp edges on the helmet to crease the paper for the template, i think you could also tape the paper onto the helmet and use a wide pencil or oil colour like a crayon and lightly color ontop of the edge, it should color in all areas exept the line where the edge touches the paper under neath. it works for transfering leaf paterns onto paper so i dont see why it wouldn also work for ths

[@dragonball3166]

This fun informative video who have money and tools to make helmet for people like me I took cheap approach bought black series helmet version

[@chimeranguardstreamteam4454]

Are you going to be releasing your patterns soon at all. I’m hopping to start working on my armor here soon and would love to be able to use your patterns the help me make it.

[@theweldinggeek]

Patterns are on TheWeldingGeek Facebook group 😁

[@heavy5013]

I'll use some of these tips to fix up the visor on a green power ranger helmet I got online. The visor it came with is really bad.

[@PelleyJ]

I want one, this is soo cool!! Now i regret not taking welding in Highschool :(

[@ResidentRecon89]

Are you putting Velcro on the Vizor itself or how are you getting it to stick to the Vizor to the Velcro?

[@bogart213]

Nicely done bro

[@Jeerin_]

how do you weather the helmet and armor

[@seangere9698]

Do you not have a welding gun for your studs at your work? Sorry I don't know what it's called in English. We use those same studs and we have an Arc welding gun that holds them and when you touch it to the aluminium it arc welds them to the aluminium. Though I'm sure your studs are steal and not aluminium like ours are so that might not be a viable option. Just thought it would be better then drilling holes in your armor and press fitting them in and being able to see them in your armor.

[@rectangleboy]

How much space do you have in there? I'm wondering how hard it would be to add a small mic, circuit board, and speaker to get that compressed voice sound he has in the show.

[@trajanschwencke]

Best there is. Well done brother

[@brighttryhard3364]

I dont get it how does the visor stick to the velcro with no stickey stuff

[@emmawhitaker9757]

Nice. If you flipped the template you wouldn’t het any of the stencilling on it at all as the wide part would go to the bottom.

[@nlproductions5030]

Omg that helmet looks amazing could you please release templates for it it would be much appreciated, this is the way

[@theweldinggeek]

Templets are on TheWeldingGeek Facebook group

[@nlproductions5030]

@@theweldinggeek are they a free download or would I need to purchase them

[@Sullivansky2012]

Can one of these Amazing Helmets be ordered from you?

[@AMAINE207]

Nice video Matt! keep em comin!

[@justinnunez176]

Thanks for the video! I actually need help with cutting my visor for my Mandalorian helmet because it has it so the visor is squeezed between 2 small edges to fit inside, how do you measure that out? I can't use posterboard to test it because it bends, I would have to keep buying these shields until I get it right. Any advice on how to find the right size that fits without wasting too much material on those shields? Thanks!

[@PapaDavid98]

Has anyone tried installing these pads in a black series helmet? I have the death watch helmet and was really wanting to do this method but was curious if anyone has ran into any problems

[@ajdoc2181]

Nice bucket bro. Is that real beskar???

[@whitemando5972]

you should open an etsy shop. these would sell so well

[@electro1154]

Matt has spoken!

[@artrelatedthings3928]

What type of scissors did you actually use to cut the Visor piece?

[@dantu5110]

Make the forge masters helm and put the welding lenses in it that would be bad ass

[@thewallstreetreaper4859]

Yo what’s that poster that’s in the middle, with Darth and all the bounty hunters?

[@YAHUWAHDAH7]

I’ve been creating helmets ever since I was 14 and I was wondering where you got the padding inside of your helmet from

[@kennethc8314]

I also want to know

[@Dracusmage]

It looks like the "airsoft helmet foam" from Amazon that I got (just search for that, you'll get a few hits right at the top). Its about $15.

[@Dracusmage]

@@kennethc8314 It looks like the "airsoft helmet foam" from Amazon that I got (just search for that, you'll get a few hits right at the top). Its about $15.

[@vladtatuyko2768]

Супер класс бро руки золотые у тебя как у нас говорят в России

[@bighoss6315]

Dude... I would love to add that helmet to my collection.

[@SkillLevel0]

I’ve been watching this build for the past few weeks. I’d legit give you $1000 for the helmet alone. I’m sorry if that is an insulting number. That’s just all the money I have lol. I’m sure you could get $5000 for the whole armor set EASILY! You are extremely talented! Love the work you do!!!

[@nathanielguy8771]

brutally badass!!

[@tsirrom1]

So awesome thank you for sharing!!!

[@miguelballesteros864]

Where can I get the STL files to be able to print this same helmet of your video? Thank you very much and greetings. 😉

[@all2easy1011]

Matt are you going to Star Wars Celebration 2020?

[@theweldinggeek]

I wish 😁

[@stevep6108]

this is the way !

[@operator3rror836]

How hot does it get in the helmet? Is there a way you ventilate it or do you just not keep it on too long?

[@Xnegnsifhfjsokemejslslckkdksj]

Do you wear your build out in public like cons and stuff? That would be so cool!

[@theweldinggeek]

Yeah I sure do my goal is to get it wearable by c2e2

[@Xnegnsifhfjsokemejslslckkdksj]

TheWeldingGeek Best of luck with the rest of the build, dude! c2e2 sounds like an amazing con. I never even knew Chicago had one of the sorts! I would like to perhaps attend it in the future after some planning, as buying badges for this year would be a little rushed :')

[@jasondecristoforo4882]

Do you have a vid with the whole outfit you made? And how much would you charge for a whole outfit?

[@koza2]

Did you do any prepping for where the Velcro sticky goes too? Like sanding, or did the sand blasting take care of that?

[@theweldinggeek]

Sand blasting took care of it

[@Shamri212]

I have a mandalorian pvc helmet in the mail will be here in two days I hope it still looks like a helmet.

[@teiganweissman]

Are you going to add the additions to his armor from the last episode?

[@theweldinggeek]

Undecided at the moment

[@JuanBadmofo]

Very nice, how much?

[@harrymorrison96]

Great helmet. For the entire kit, how much did it cost for all of the aluminum? Could you make one with a DOT( department of transportation) approved helmet as a base so you could use it on a motorcycle?

[@harrymorrison96]

Just for clarity, using the DOT approved helmet as a base but still keeping it to scale and not looking like the helmet is oversized or a bobblehead.

[@seanhaywood7946]

How much to buy one?

[@therealdeadpen]

Once you put it on you can't take it back off. *This is the way*

[@carlosmondragon6639]

This is the way

[@KRANKENdude]

This is the way

[@thephantummask242]

This is the way

[@ResidentRecon89]

I like the Velcro cause the Vizor is easily replaceable along with the Velcro hook part.

[@ecproductions66]

This is the way

[@bernardmichels8204]

nice work

[@xxxxzorroxxxx]

What is the size of helmet

[@sensei727]

Woooooow nice job !

[@edwardmccoy490]

do you sell custom builds?

[@MyLord100571]

I didn't scroll through all of the comments, but I would be willing to pay for you to build me a helmet! Awesome awesome job!

[@javierortizbarcelo681]

Is the visor green, cause I just want it black, not green cause I know it really doesn’t matter but I don’t wanna see everything green…

[@robertresino9801]

Do you have templates for the metal work available for sale

[@theweldinggeek]

Templets are on TheWeldingGeek Facebook group

[@shortti789]

If i wanted to make this what kind of equipment would i need to make the helmet and armour ?? or even better how much does it cost to buy from you lol

[@ric00455]

Is it 3d printed? or metal?

[@ElDenteCK]

👏🏻 well done

[@danialjelkin9128]

you should do a video on all your pop figures just as a fun little side episode

[@Jono_Maxwell]

Will you be putting the mud horn signet on your armour?

[@theweldinggeek]

Haven’t decided yet probably I’m making ch 3-7 version right now

[@olofvladamir292]

How much do u charge for the helmet,,,cause I want one

[@wadewilson5296]

This is the way.

[@imm311]

This is nice! God bless!

[@robertconser9103]

Do you take orders?

[@Chadder82]

Beautiful 🤘🏼🤘🏼🤘🏼🤘🏼🇺🇸🇺🇸🇺🇸🇺🇸

[@Pathoking]

Also, are you going to make the amban sniper riffle?

[@fergusslater3739]

Thank you this is so helpfull

[@АлексейМокробородов-з2ъ]

Ton Cool!

[@Rebecca_The_Dragon]

wouldnt those bolts and nuts sticking out repeatedly bump you in the head and hurt like hell? I would put pads over those

[@theweldinggeek]

I was worried about that but it doesn’t seem to be an issue

[@intheruff4500]

I want one so bad this thing is fucking awesome 😍😍😍