Build the Ghostbusters Ecto-1 - Part 127,128,129 and 130 - Finishing the Gurney and Light Bars

  Рет қаралды 24,705

World of Wayne

World of Wayne

Күн бұрын

Пікірлер: 160
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
@markmccormack635
@markmccormack635 2 жыл бұрын
Love your floating ghosts just perfect for a intro to build the Ghost Busting car..
@davidspencer8373
@davidspencer8373 2 жыл бұрын
Like video
@kingmason7
@kingmason7 2 жыл бұрын
how did your Proton Pack(s) Neutrona Wand to stay onto the Pack.?
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
@@kingmason7 www.PartworkUpgrades.com do a clip for them
@robertgripton4499
@robertgripton4499 2 жыл бұрын
Chloe and Mike needs this video to try to do any modifications to this section of the build. Loving the build as all ways. Stay safe all.
@richardh729
@richardh729 2 жыл бұрын
I loved the ghost effects at the beginning. Great start to the video!
@richardslezak1274
@richardslezak1274 2 жыл бұрын
Love the Ghost!
@jamesventress5200
@jamesventress5200 2 жыл бұрын
I like the lights and the ghost floating around at the start of the video. Awesome as usual Wayne
@ChanHo_LeeSMM
@ChanHo_LeeSMM 2 жыл бұрын
Oh my god! This Ecto-1figure is so gorgeous!! Keep working, man!
@reaperofsouls7700
@reaperofsouls7700 2 жыл бұрын
Well dang only a few more issues and ur going to be finished with another amazing model
@barrywhitlock141
@barrywhitlock141 2 жыл бұрын
Those roof lights are quite complex but the results are great, that makes all the difference
@steveberry9433
@steveberry9433 2 жыл бұрын
Thank you for another great video! Love the ghost effects too. But wow those are loud motors! I hope the siren sounds are going to be loud enough to muffle those motors.
@michaeljohnwicks2328
@michaeljohnwicks2328 2 жыл бұрын
Had a good think about how to reduce the noise, When I get to this stage I am contemplating lining the base on each light bar with thin felt before attaching each cog wheel. Also, instead of having all lamps facing the same way, will just have one each side facing one way & the other 2 to the side. I think this may work, & may also help slow the speed of each lamp. One good thing, is that it gets our brains working to resolve these little issues. It is just about trial & error. Will keep you updated.
@ericcollins7455
@ericcollins7455 2 жыл бұрын
Lamps too in real life only have a single reflector where as EM has made them have 2. I think the speed is right but the light bar having 2 reflectors not one is making it seem fast.
@tyymclarenfan
@tyymclarenfan 2 жыл бұрын
That lightbar is actually a code3 XL unit that my old towtruck had in amber 👍
@aztekdummy
@aztekdummy 2 жыл бұрын
slow start to the speed build :) those small motors are tremendous...would one, say, turn a dish?
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
I’m looking into it now
@bedfordshiremodeller4491
@bedfordshiremodeller4491 2 жыл бұрын
I'm even sure if the dish itself turned on the Ecto-1 🤔🤷‍♂️🚑🚗
@Cin0s3
@Cin0s3 2 жыл бұрын
Those are some really small motors but wow do they make some noise! I wonder if you can grease up the poles on the gears and maybe that will take some of the noise away. The gurney and the lights are some of the coolest things on this build. I think the gurney could stand by itself as a build.
@waynepedley5395
@waynepedley5395 2 жыл бұрын
I also wonder if there's some way to add some vibration dampening too, as the with the sheer size of the interior cabin, the light bars are essentially sitting on top of an echo chamber...
@Vinnero0
@Vinnero0 2 жыл бұрын
kzbin.info/www/bejne/bnrVd3SGdrehjq8
@eugeneclooney5706
@eugeneclooney5706 10 ай бұрын
great video as always! i'm only getting back to it now. one of those small motors does not work on mine :S and that switch does nothing! it's just constantly on. i refuse to take it apart AGAIN! 🤣🤔😭
@jonherbsleb
@jonherbsleb 2 жыл бұрын
Wayne I know your OCD gets the best of you…being a FF/paramedic…the light bar lights should actually be off set from each other so there is a constant flash going to the front…beautiful build fella
@mikeking2539
@mikeking2539 2 жыл бұрын
OMG!!!!!! Even in the world of model railways have I ever seen motors as Small as the ones for the lights! That's mad! P.S (edited) re the racket that the light bar(s) make, perhaps if ALL the gears had that white grease on them, it would (might) reduce the noise that they make. Just a thought, I might be totally wrong!
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
They are incredibly loud as well
@mbwoods2001
@mbwoods2001 2 жыл бұрын
Locos now have an extra small motors to make the fans turn, or move the pantograph up/down. Yeah, ive always oiled the cogs and gears on noisy locos and runs quieter afterwards.
@jamesallen5627
@jamesallen5627 2 жыл бұрын
I’m going to try put some silicone under the motors, I think it’s the vibration of the motors going through the plastic where they seat. Love the channel
@Emtbtoday
@Emtbtoday 2 жыл бұрын
The sound might die down once the grease travels through the gears ⚙️ ate they plastic? You can always find replacements there like mini drone motors should see if they sound loud when not in the light bar they could be rubbing of the actual light bar the spiral but you can get brushless motors to replace them they won't be like this but will fit perfectly! Good review this for that actual it's something to make sure to order extra brushless motors or new gearing before building the light bar! Can't see that being right the grinding somethings rubbing A
@michaeljohnwicks2328
@michaeljohnwicks2328 2 жыл бұрын
Wow. Can not wait to get to this stage Wayne. Pity they make so much noise though. Will have to see if there is someone in the modding community that can resolve this problem. Great video as usual. Love the ghosts at the beginning.
@rwdplz1
@rwdplz1 2 жыл бұрын
Just commenting to see if/when someone picks up the Eaglemoss pieces and starts this up again. I was REALLY tempted to get this one, at the moment glad I didn't.
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
No one knows atm
@sveeart
@sveeart 2 жыл бұрын
I figured the light bars would make a bit of noise but oh my lord! Lol
@FlexDRG
@FlexDRG 2 жыл бұрын
Looks like those motors could use a resistor to slow them down some. Might also reduce the noice a bit.
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
They do need slowing down but the motors are silent
@tyymclarenfan
@tyymclarenfan 2 жыл бұрын
I'd use more grease inside the spinner gears to reduce the noise 👍
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
I used the whole pack in the end and it’s still quite loud
@bttfdmc1984
@bttfdmc1984 2 жыл бұрын
Nice to see the light running. looking back at clips from the movie they spun a bit slower and not at the same time (off set slightly) Maybe when the second light bar is added it will help slow it down since power will be going to 4 motors not just 2. Also the blue tint for the lights looks to be a few shades too dark should be a lighter blue at least that's how it looks on video I know in person it could look different.
@bedfordshiremodeller4491
@bedfordshiremodeller4491 2 жыл бұрын
Iain Campbell over at Partwork Upgrades might be able to com up with anoise reducing mod or muffler. To reduce the loud sound when turned on🤔💭
@ianbullard3523
@ianbullard3523 2 жыл бұрын
Hi Wayne, loving the videos for the Ecto 1👍🏻, I was wondering have you try silicone grease for the blue roof siren, I tried it with my and it works a treat and it is much quieter
@edwardbellamy6559
@edwardbellamy6559 2 жыл бұрын
would putting either some oil or grease on cogs take out the noise on the lights when going around
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
It’s covered in an excess of the grease they provided
@zackschulz6448
@zackschulz6448 2 жыл бұрын
I watched Ghostbusters: Afterlife and it was awesome. "For Harold and Ivan Reitman"
@TDax
@TDax 2 жыл бұрын
I have a full sized versions of those lights (on a bull dozer one of my aibos used to drive) and it didn't make that much noise
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
I’m ganna talk about that tonight on the live stream
@Justrandomvideos-2023
@Justrandomvideos-2023 2 жыл бұрын
Thats cool I wonder how much a big model like that go for i would like the " ecto1-A " from the second movie
@maks72rus
@maks72rus 2 жыл бұрын
It's just divine! Thank you for the videos! I have not been able to receive the 14th parcel for half a year already (Some kind of warehouse move at Eaglemoss!
@AoiKaze2000
@AoiKaze2000 2 жыл бұрын
I wonder if you work in grease between all the gear teeth if that will help dampen the noise.
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
Nope. Tried that
@FMChimera
@FMChimera 2 жыл бұрын
When people first started motorizing the Buzzards on the big 1/350 ToS enterprise model the supplied motors were crazy noisy. Just low quality motors. There are nearly silent ones out there that fix this annoyance. Otherwise, the only way to somewhat quiet them down is a lot of packing and there's no place to do that on the Ecto.
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
The motors are silent. The noise is the gears and I used their grease plus my own to see if that would make a difference.
@project.jericho
@project.jericho 2 жыл бұрын
It's the gross motion plastic gearing, not the motor. The reduction gears are going to need to be redesigned.
@julianmhall
@julianmhall 2 жыл бұрын
Perhaps a rule held against the bend line would help? Things have a habit of not bending where they should.
@raptor4239
@raptor4239 2 жыл бұрын
hopefully theres some mods on this bc the motors on the light bar are loud and the lights on the front seem be very very dim
@UltraPokeZ
@UltraPokeZ 2 жыл бұрын
Getting closer and closer its going to be sad when its over.
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
Yep 11 stages left
@bedfordshiremodeller4491
@bedfordshiremodeller4491 2 жыл бұрын
@@WorldofWayneUK So we're talking Autumn this yr when it's fully finished then? 🤨🤷‍♂️
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
@@bedfordshiremodeller4491 theoretically 3 months
@bedfordshiremodeller4491
@bedfordshiremodeller4491 2 жыл бұрын
@@WorldofWayneUK Nice July time
@waynepedley5395
@waynepedley5395 2 жыл бұрын
Roll on the 1/8 scale Ghostbusters 2 Statue of Liberty! 😆😉
@puzzlemaniaticchamarilerod4916
@puzzlemaniaticchamarilerod4916 2 жыл бұрын
We know how will be 131. Next stages will be some surprise
@ChopsNRodders
@ChopsNRodders 2 жыл бұрын
It looks awesome, I'd deal with the noise, although not ideal if the motors could be slowed down. I wonder if there is a way to use a potentiometer to control speed? I see someone mentioned a resistor. Hoping someone comes up with a remedy for this. This car was also supposed to come with Remington white walls, which are a much better looking tire on the car than the firestones IMO. I reached out to Eaglemoss about it, they offered no help in there response. I also reached out to Mike Lane about potentially doing a correct tire mod in the future. It would just change the stance of the car and offer a far more accurate detail. Love watching you're progress on this, always wait to see your build before anyone else'. Cheers.
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
Funny enough, before I swamped the gears in grease the resistance was making it run much slower
@terrybaptist795
@terrybaptist795 2 жыл бұрын
Like wow look at size of that electric motor. That must be the worlds smallest electric motor?
@thunderrobots1980s
@thunderrobots1980s 2 жыл бұрын
so a thought occurred to me this whole set was designed to work off a battery pack not a wall outlet , so i was thinking that the light bar motors are so loud an fast spinning cause they are getting to much power , perhaps you should check the light bars with the battery pack , after all you don't want to burn out the motors
@Emtbtoday
@Emtbtoday 2 жыл бұрын
That's so cool I'd have rather done this than the charger I'm doing! Any swaps anyone lol? I think this is going to be the next one for me!
@jonathankeithharding8772
@jonathankeithharding8772 2 жыл бұрын
Hi Wayne after watching your video you made a mistake. With the gear assembly you should of oiled all the gears first as indicated in the instructions as I did on my build over the weekend. Tested the lights after it was connected very little noise from the gears.Hope this helps.😀
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
I went back and oiled them completely. It ran faster but the sound was still awful
@chrisgemmell2742
@chrisgemmell2742 2 жыл бұрын
Wow been about a year since ive seen your videos i gave up on this build as i hadnt had a delivery in 6 months
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
Not good
@chrisgemmell2742
@chrisgemmell2742 2 жыл бұрын
@@WorldofWayneUK yeah mate after watching you and seeing yours i kinda regret it now 🤣
@Regelos
@Regelos 2 жыл бұрын
Proton Packs
@jamesblake9618
@jamesblake9618 2 жыл бұрын
Hey Wayne, love your channel. Been a fan for a while and watching your builds got me to get Eleanor and the ecto 1. I was curious if you had a issue with the hood not closing right. I tried everything. From just mounting the hood then the quarter panels, to panels then hood. For the life of me I can't get it to close right
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
No. Saying that from what I remember I adjusted the hinge from the inside while the hood was down
@jamesblake9618
@jamesblake9618 2 жыл бұрын
@@WorldofWayneUK I tried that too unfortunately. It keeps hit on the driver side. The crome does not seem to either sit flush or it's got a imperfection. Also for the noise on the light bar, try some grease on the gears and motor gear like you did in the video. Also under each gear. That should dampen the noise as well as keep the gears from rubbing plastic to plastic
@MrMcGear
@MrMcGear 2 жыл бұрын
Been waiting for this episode to air. But that is pretty loud🧐
@ericcollins7455
@ericcollins7455 2 жыл бұрын
your next issue contains airfix waterslides and a VERY vibrating grinding rear light , you think the fronts are bad wait till you fit the rear ...OMG ....... OMG the grinding vibrations go through the car and amplify it tenfold.
@ListerDavid
@ListerDavid 2 жыл бұрын
I would have greased all of the gearing system but they look great spinning round.
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
I did afterwards. Didn’t help
@ListerDavid
@ListerDavid 2 жыл бұрын
@@WorldofWayneUK was worth a shot.
@ericcollins7455
@ericcollins7455 2 жыл бұрын
if you want this movie accurate then facing the car left to right on the light bar , light 1 far left faces forward - light 2 is sideways - light 3 faces forward - light 4 faces you. I used the Sedgwick call exiting the firehouse to work this out.
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
Nice
@milanondrak5564
@milanondrak5564 2 жыл бұрын
You might reduce the noise a bit if you grease the gears too. Been waiting ages to see this build again. The way the lights work is very effective though, don't you think?
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
Oh they can’t get any more grease in them. Trust me
@gregcarter9680
@gregcarter9680 2 жыл бұрын
Why is it making that noise though....I also wondered about lubing up all of the gears...or maybe putting something to insulate the motors a bit (thinking felt or something). Looks good though....I just finished up issue 32 (glad THAT'S over), so I can't wait to get going on this.
@petrirantavalli859
@petrirantavalli859 2 жыл бұрын
Worm gears and no bearings make it extra heavy for those tiny motors I think.
@bedfordshiremodeller4491
@bedfordshiremodeller4491 2 жыл бұрын
@@petrirantavalli859 What's aworm gear? 🤔🤷‍♂️
@petrirantavalli859
@petrirantavalli859 2 жыл бұрын
@@bedfordshiremodeller4491en.wikipedia.org/wiki/Worm_drive
@elwdriver
@elwdriver 2 жыл бұрын
how do you keep the stick on trim on the doors on? i noticed yours is coming off, what do you recommend ?
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
Peel off. Bend. Re glue in place :D
@monstertrucker35
@monstertrucker35 2 жыл бұрын
The lack of the ribbon cable on the proton packs are killing me. How did they overlook such a serious detail??
@ohmydinosare
@ohmydinosare 2 жыл бұрын
Whoops, I thought I'd subscribed so I'd catch these as they went out, but apparently not, only seem to have missed this one instalment, though. One thing I'd been wondering was would you complete your Ecto 1 before I could complete my own Playmobil version. I got that second hand on new years eve, missing about a dozen parts, I contacted playmobil to see about buying spares and they offered to send me all the bits I needed free of charge. Those turned up in late january, but one single part got missed from the order. I felt bad bringing it up with them since they'd sent them for free but they were very good about it and said they'd send me the one remaining part (the silvery thing on the front passenger side behind the light bar, I think it's meant to be the siren) but that since it was just one piece they'd probably have some delay in getting it out to me, which I was absolutely fine with given the circumstances. Anyway, that was the race, since I didn't know how long that would take, and I knew this was getting towards the end now, just the roof gubbins to go. But my siren arrived last month, my Ecto 1 is finished, so I'm afraid that in this unfair and arbitrary race, that you didn't actually agree to be in, I have beaten you. Sorry about that. As a consolation prize, though, you get the more elaborate model.
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
😃😂
@johntreloar8203
@johntreloar8203 2 жыл бұрын
After watching a second time, maybe a bit of grease on all of the cogs might make it a bit quieter, worth a try?
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
I used all the grease they supplied and my own and still had the same effect
@johntreloar8203
@johntreloar8203 2 жыл бұрын
@@WorldofWayneUK It sounds like plastic chatter, when there is a loose fitting cog?
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
@@johntreloar8203 yep. These things needed to be mounted on bearings.
@WillsWorkshop
@WillsWorkshop 2 жыл бұрын
Oh my, there must be a mod to get that gearing quieter! Maybe more grease will help
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
No. Tried that. They need bearings or metal gears
@WillsWorkshop
@WillsWorkshop 2 жыл бұрын
@@WorldofWayneUK maybe raid a clock shop?
@danceelitedanceclub9927
@danceelitedanceclub9927 2 жыл бұрын
Hello Wayne! What’s about last packs to complete this build?
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
Who knows
@danceelitedanceclub9927
@danceelitedanceclub9927 2 жыл бұрын
😳
@christopherschmidt4264
@christopherschmidt4264 2 жыл бұрын
Is it just the angle of the camera, or are the 2 flashing lights in front of the light bar dimmer then the ones mounted in the rear?
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
They are a little dimmer yes
@bossaka2551
@bossaka2551 Жыл бұрын
Hey wayne one question i got a problem with these lights they are not turning but when i checked the motor these are turning maybe someone can help me have a nice day you all 😀
@KatchUpmedia
@KatchUpmedia 2 жыл бұрын
Hey question I am building this but only got to part 104 and the parts stopped coming. Did eaglemoss go bankrupt?
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
Yes
@KatchUpmedia
@KatchUpmedia 2 жыл бұрын
@@WorldofWayneUK well....that really is unfortunate. Did you manage to finish yours?
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
@@KatchUpmedia nope. We have been told to hang tight and wait for news
@gringomann1
@gringomann1 2 жыл бұрын
I want the light to stay on but not that noise,lol
@craigthornton1971
@craigthornton1971 2 жыл бұрын
Uh oh, wait until peeps in the FB group get to hear about the noise 🤣
@collincutler4992
@collincutler4992 2 жыл бұрын
How are you still getting shipments? I haven't recieved a shipment since February and many haven't recieved one at all this year.
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
I haven’t received anything for a while now. We were ahead in the UK but nothing for a few months now
@collincutler4992
@collincutler4992 2 жыл бұрын
@@WorldofWayneUK dp you have any idea of an etela on when they're going to pick back up? I mean, no one seems to know anything. I know someone has to know. These decisions aren't made by robots.
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
@@collincutler4992 I wish I knew. I am in the same boat
@maxheadroomsfan
@maxheadroomsfan 2 жыл бұрын
we are only 2 or 3 issues away from completion and it's only roof bits so unsure what the delay is. plus I got charged 57 quid which seems a lot compared to a couple months ago
@rickgregory9616
@rickgregory9616 2 жыл бұрын
Holly Earache Batman. What are we going to do about that noise?!
@bedfordshiremodeller4491
@bedfordshiremodeller4491 2 жыл бұрын
Mind your back when lifting that car up/down Wayne as that's gnna weigh15KG once it's complete😬🤞⚖
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
Tell me about it. It weighs a crazy amount
@bedfordshiremodeller4491
@bedfordshiremodeller4491 2 жыл бұрын
@@WorldofWayneUK This is the main reason why i chose not to subscribe to it
@bedfordshiremodeller4491
@bedfordshiremodeller4491 2 жыл бұрын
Onna further bitta GB news asequel has been given the Greenlight to Ghostbusters Afterlife. They need to include Slimer/the storyline will probs be about the Carpaytheeyans as they got mentioned brieflee in GB2😁👏🙏👍💭💡
@davidspencer8373
@davidspencer8373 2 жыл бұрын
Like video
@craigthornton1971
@craigthornton1971 2 жыл бұрын
I'm not sure which lights to unplug from the car, both are labelled N, does it actually matter which N I use?!
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
I don’t think so
@Retrox1989
@Retrox1989 2 жыл бұрын
Always wanted to do models like this but when you add up the price for all the kits it makes your eyes water.
@ghostbuster_nr_1
@ghostbuster_nr_1 2 жыл бұрын
@bedfordshiremodeller4491
@bedfordshiremodeller4491 2 жыл бұрын
I noticed in the1st minit you forgot to activate your speed up visual button on the last section of your build🤦‍♂️😂
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
Yep lol
@rover213
@rover213 2 жыл бұрын
the lights in the movie aren't in sinc., they all differ on the turn...
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
Lol. I had it that way first time round but my ocd said follow the instructions
@rover213
@rover213 2 жыл бұрын
@@WorldofWayneUK no worries my ocd went the other way, none the less that was a hand full to fiddle with
@bedfordshiremodeller4491
@bedfordshiremodeller4491 2 жыл бұрын
That can be fixed with an audrino board mod💡
@matthewreynolds3013
@matthewreynolds3013 2 жыл бұрын
Why haven't we had another video in like 2 months? Whats happening?
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
I wish I knew. Eaglemoss seem to be MIA
@chrisgwilliam9893
@chrisgwilliam9893 2 жыл бұрын
👍🏻
@MrRobovision
@MrRobovision 2 жыл бұрын
I do hope there is a mod coming for the light bars, the noise is horrendous in your video that would be annoying for me if I can hear that over the sound of the siren.
@mikeking2539
@mikeking2539 2 жыл бұрын
OMG I thought that you were going to accidently stab yourself in the finger within the first 2 mins of the video! When putting the wheel on.
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
Lol
@hungerfordpetshop
@hungerfordpetshop 2 жыл бұрын
ive changed my name its via taz finaly built this part been disheartened from not being able to complete it any news on anyone doing 3d parts or anything?
@williamtrask1582
@williamtrask1582 2 жыл бұрын
sorry mr wayne i left a comment that said that this was a old video but i soon found out that it wasnt again sorry
@artreyes338
@artreyes338 2 жыл бұрын
Hello, is Eagle Moss customer service as none existent to you as it is to me?? I have been waiting on a back order issue since February. No answers at all when calling their 1800 number & No help from their agents!!! What can I do? I spent too much and invested too much to just walk away …. What is your advice. I’ve been watching your channel for the Ecto 1 since you started the build. Please advice. Thanks!! Rick
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
Hi Rick. Is that US? Best thing is to go through their Twitter account
@artreyes338
@artreyes338 2 жыл бұрын
@@WorldofWayneUK Sir, good morning. Yes from Phoenix AZ. Thank you. I’ve been doing the hobby thing for many years. Honestly this is the 1st. time ever that a none important (compared to real life) hobby past time, has just become so frustrating! Anyways thank you for your fast and informative response. I’ll give it a try. Rick
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
@@artreyes338 the agent I try and communicate with is called Zoe. She can sort out most things
@vwcreativetechnology
@vwcreativetechnology 2 жыл бұрын
you get better rotating lightbars with 8 Pistenking beacons, I really love this model, but the lightbars are just awful.
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
Couldn’t agree more
@nigelwatson504
@nigelwatson504 2 жыл бұрын
I'm starting to get a bit pissed with it as I'm still waiting for issue 19 got told it's on back order and I'm getting to the point of saying sod it as I'm like 7 months behind on the build 🤬🤬🤬🤬🤬🤬
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
It’s not good at all. The logistics suck
@tiki-ed5573
@tiki-ed5573 2 жыл бұрын
I have been waiting for over 6 months on my next shipment. They say it's because of the magazine and won't ship the parts without it. Eaglemoss is a terrible company.
@ZenStudiosCO
@ZenStudiosCO 2 жыл бұрын
Let me guess…you’re waiting for stage 71-74. So am I…since October
@did3d523
@did3d523 Жыл бұрын
noisly
@johntreloar8203
@johntreloar8203 2 жыл бұрын
Is it just me or does everyone wonder if Wayne is going to stab himself with the screw driver every video???, Sorry Wayne.
@WorldofWayneUK
@WorldofWayneUK 2 жыл бұрын
I wonder the same thing
@williamtrask1582
@williamtrask1582 2 жыл бұрын
this video say 6 hours ago my ass this is a old video
@williamtrask1582
@williamtrask1582 2 жыл бұрын
i stand corrected sorry
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН
How to treat Acne💉
00:31
ISSEI / いっせい
Рет қаралды 108 МЛН
Don’t Choose The Wrong Box 😱
00:41
Topper Guild
Рет қаралды 62 МЛН
Mark Rober vs Dude Perfect- Ultimate Robot Battle
19:00
Mark Rober
Рет қаралды 43 МЛН
PLAYMOBIL | Happy Halloween | PLAYMOBIL RealGhostbusters
1:06
Playmobil Polska
Рет қаралды 11 МЛН
Super Mario Busters - A Ghostbusters / Super Mario Bros. Mashup
3:45
NYC Struck by an Ice Age (Venkman's Returns) | Ghostbusters: Frozen Empire | CLIP
5:57
BLITZWAY ECTO-1 ( UNBOXING & REVIEW ) - ITS HUGE!
10:01
Jon Deak
Рет қаралды 96 М.
Ghostbusters Ecto-1 1/8 Scale Model Kit Preview
3:49
Adam Savage’s Tested
Рет қаралды 131 М.
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН