I’m so impressed with what Milwaukee tool is doing. Their electric impact tools are the best and now tool boxes, under hood lights , ratchet and hand tools. The industry as change , in the 90’s and early 2000’s a hundred hour week was nothing and you didn’t mind paying 300 bucks for ratchet. Now if you make 40 hours is like hitting the Lottery so , it’s nice to see good tools at affordable prices.
@Shoptoolreviews3 жыл бұрын
It's obvious, you have been around the industry for a few years. You are correct, it's hard to afford to just throw money at tools today. Always need to search for the best value of performance for the $$. Thanks for watching.
@jl93623 жыл бұрын
Thanks for this, never would have dreamed of applying that much torque to a ratchet at any of these 3 sizes. Milwaukee under priced these (will be getting all 3) but they definitely overpriced their flex head ratcheting wrenches. Their pricing structure across the board is confusing to say the least.
@Houstonruss3 жыл бұрын
This makes me feel better about dropping 800 on the mechanics toolset from Milwaukee. Better than tooltruck isn't what i'd expect but I'll take it!
@Shoptoolreviews3 жыл бұрын
Thanks for watching.
@judson36803 жыл бұрын
Looks to me that the stubby 3/8 mechanism can possibly fit in the 9 inch 1/4 drive body
@case83093 жыл бұрын
I was wondering that myself. I hope the come out with a stuby flex 3/8 that is as short as the 1/4
@rodneymattinglyjr7239 Жыл бұрын
Someone has already put the 3/8 into the 1/4 stubby
@gmctech3 жыл бұрын
I think the folks at Milwaukee wake up every day and ask themselves how they can hand Snap-On their asses today... Milwaukee is just flat out dominating the tool industry and advancing their tool lineup leaps and bounds above every competitor.
@Shoptoolreviews3 жыл бұрын
They definitely seem to continually innovate and push the boundaries. Thanks for watching.
@BenVanAmburg3 жыл бұрын
Amazing news I always wanted more milwaukee hand tools
@rubenpatino14733 жыл бұрын
Those orings are going to be a game changer !!! They’re going to last much much longer
@mikedelgado8460 Жыл бұрын
I think @ProjectFarm tested the 1/2 Milwaukee ratchet to fail at over 300ft lbs. I was so impressed with it I now own all three socket and ratchet sets. Today I just ordered the 1/4 stubby from home depot with a $25 gift my brother got me for fathers day. Could have used it a few weeks ago but the opportunity will arise again!
@ginopumadera42653 жыл бұрын
Love the extendeds !!! Stubbies look super practical !!! Great motivation and coverage !!!!
@Shoptoolreviews3 жыл бұрын
Glad you like them! Thanks for the kind words and for watching.
@malan828 Жыл бұрын
Man that ratchet was bending and didnt snap! I just bought me a bunch of these Milwaukee hand tools and love the feel so far!
@lelandmason57603 жыл бұрын
Those internals look almost verbatim to the Carlyle 90 tooth A models (the A models have T9 torx bits instead of a snap ring) with the three gaskets, direction selector retaining pin and the pawl design
@DropThatBeatNubs3 жыл бұрын
I see you with these frequent uploads let’s go!!!!!!!
@7dioclau3 жыл бұрын
🔥🔥🔥👍👍👍
@Tiovergudo3 жыл бұрын
I have a similar set up but with gearwrench and i love the extended length.
@willyjilly96843 жыл бұрын
They all look great but that little stubby really takes the cake 👍
@keyakku9352 жыл бұрын
I can't wait to see how milwaukee nails flex head ratchets or even roto headed ratchets
@ToxicityAssured2 жыл бұрын
I went by Advanced Auto today and picked up a three pack (1/4, 3/8 and 1/2) of the new Diehard ratchets. All were very dry inside and got the full treatment. They are identical on the inside to Milwaukee. The pawl on the Diehard has less writing but they are the same shape. Both are laser etched on the head and both have the same pawl. Both have all the seals and same switch design. Both have the anvil that seats into the head and pin like pawl spring thing. Milwaukee does have a unique handle design. The comfort grip Diehard have very nice handles too tough. Diehard has no stamped markings at all.
@Shoptoolreviews2 жыл бұрын
Thanks so much for letting us know. We will definitely have to check this out.
@jacob24833 жыл бұрын
I have the 3/8 and 1/4 from the sets and they are nice but I just use comfort grips. I’m young and plan on saving my body for the future. Comfort grips, knee pads, ear protection, glasses, power tools, and gloves. Chrome is easy to clean and looks nice but I’d rather save my hands.
@rookiexreviews3 жыл бұрын
Haha 😂 pus
@7dioclau3 жыл бұрын
Especially grip. When working with oils/grease. But they do look 🔥🔥
@rookiexreviews3 жыл бұрын
lol I jk was too easy couldn’t help it
@jacob24833 жыл бұрын
@@rookiexreviews lol yeah I figured your joking, the weak guys are the guys that don’t work on anything 😂
@rookiexreviews3 жыл бұрын
Hey hey I work on my KZbin comments pretty dam hard not easy pull a burn like that without lil practice 👆🤣
@MrSupernova1112 жыл бұрын
Bro, how in the hell do I miss this video!!! These ratchets look awesome!
@renorailfanning54652 жыл бұрын
As a DYI mechanic, who will not be doing any engine rebuilding or suspension work, do you think the regular 3/8th ratchet set will be good enough ? I was thinking of getting the 1/2 set but now I'm debating getting the 3/8 extended ratchet to go along with my 3/8 set. The length of the regular 1/2 and the extended 3/8 are the same.
@victoraleman313 жыл бұрын
Milwaukee bring out the flex heads and comfort grips!
@jasonfisher843 жыл бұрын
The o-rings are a great feature to see
@JoeRogansGutBiome3 жыл бұрын
Imperial unit of measurement is completely based on Metric unit. Which means we should also completely switch to metric only
@richardlong9877Ай бұрын
That 3/8 in the 1/4 body is cool.
@prevost86863 жыл бұрын
It would be nice of Milwaukee to offer a bundle deal for those of us who would buy all of the ratchets at once. I know that Milwaukee is listening but it’d be nice if they responded.
@gtcam72323 күн бұрын
Wish they had replacement plates and anvils for available. Lol
@albertoreyes41143 жыл бұрын
Very good review 💯
@pontiaced253 жыл бұрын
Great Video Tim! BTW What are those yellow "grippy" gloves you wear? I've been wanting to find something new for in the shop.
@Shoptoolreviews3 жыл бұрын
Thank you. The gloves are Mechanix gloves and I LOVE them. But, with the COVID crud, you can't find them. Thanks for watching.
@rrt083 жыл бұрын
Walmart has them in the auto repair area of store.
@mikethetoolman87763 жыл бұрын
carlisle or gear wrench likely
@_P0tat07_3 жыл бұрын
Damnit I just bought snap on extended 3/8 and 1/2 ratchets. I like snap on though. They make great ratchets. I have a Milwaukee 3/8 standard length ratchet and it’s not my go to ratchet unless I need something shorter than my snap on 3/8 ratchet, but I do like the milwaukee ratchet I have, seems to be built really well and is well built.
@FusionBoost2.03 жыл бұрын
Don't be sorry you bought the snap on ratchets, Milwaukee will never make a better ratchet then snap on
@_P0tat07_3 жыл бұрын
@@FusionBoost2.0 of course not, although I can’t complain too much because I got the 2 brand new ratchets on eBay for half price
@FusionBoost2.03 жыл бұрын
@@_P0tat07_ you did well... My snap on and Mac ratchets are the best ones I own...
@_P0tat07_3 жыл бұрын
@@FusionBoost2.0 I have a 26” US General toolbox filled with Snappy tools that I bought through school :P but yes, Snap On ratchets are so well built and smooth.
@trentroberdeau63993 жыл бұрын
@@FusionBoost2.0 lol, Na, not really
@hikinguphigh3 жыл бұрын
I would buy these if they had the push button release, I need to know for certain when I’m down inside something, the socket is not coming off
@terdsie3 жыл бұрын
My question is how easily does the 3 inch stubby flip directions? I hate 1/4 inch drives because they always slip out into "neutral" on me.
@derrickdixon19663 жыл бұрын
I've got to have that stubby.
@Shoptoolreviews3 жыл бұрын
That Stubby is AWESOME!! You'll buy it the first time you see it. Thanks for watching.
@masterkilla773 жыл бұрын
@@Shoptoolreviews could really have used the small guy for a crib just put together lol
@r4oodles3 жыл бұрын
Looks like some great ratchets. I think that stubby 1/4 would be very handy. Great review.
@Shoptoolreviews3 жыл бұрын
I think so too! It has already come into play in the shop. Very handy. Thanks for watching.
@arongazsi Жыл бұрын
why does milwaukee rachets don't have grip ?
@josefelix41522 жыл бұрын
Holy cow, that Isa very well built ratchet
@donnysanner3423 жыл бұрын
I can hear it already , what ? I broke my half inch ratchet the first time I used it. " Really ? What were you doing ?). I was just taking the lugs off of a dayton wheel. ( Wow that must have been hard , you must be really strong). Nah , I had a 8' cheater bar on it....😜
@Shoptoolreviews3 жыл бұрын
You got it. I'm sure that wouldn't be the first time. lol. Thanks for watching.
@7dioclau3 жыл бұрын
400lbs of force on a 1/2" ratchet 💪💪👍👍👍 Take my money💵💵 Great vid 👌
@Shoptoolreviews3 жыл бұрын
Right on. Thanks for watching.
@BenTheAVGNFan3 жыл бұрын
Flex head Milwaukee please!! With maybe a comfort grip!! Would go right next to my Kobalt ;)
@frankieruffino45203 жыл бұрын
These are looking really nice but to compete in the mechanics world they’ll have to come out with a soft grip and a flex with possible lock to the flex. Excited to see what the future has to bring
@SB-dw6hz3 жыл бұрын
I hope they come out with a locking flex head, or atleast a flex head
@Shoptoolreviews3 жыл бұрын
Us too. Thanks for watching.
@chrisrexmandie13 жыл бұрын
when will these be available?
@ivanivanov-rc2kv3 жыл бұрын
Always very good review
@Shoptoolreviews3 жыл бұрын
Thank you very much, we appreciate that. Thanks for watching.
@jrelectrician43873 жыл бұрын
THANK YOU FOR THE INFO BRO 👍🏼
@Shoptoolreviews3 жыл бұрын
No problem 👍. Thanks for watching.
@nicholaslacovara23813 жыл бұрын
Is there anyone who does not have the Husky Magnetic Bowl?
@Shoptoolreviews3 жыл бұрын
Lol. I don't know, but they sure come in handy. Thanks for watching.
@gtcam723Ай бұрын
I wish I liked the Milwaukee ratchets better
@25centsapop3 жыл бұрын
Stubby 1/4" is gonna be a useful little tool. Looks a little bulky at the head tho
@Shoptoolreviews3 жыл бұрын
It's a very handy little guy. Thanks for watching.
@kawasaki0000000000003 жыл бұрын
Does it look like you can gut the 3/8 and put in the 1/4 body?
@Shoptoolreviews3 жыл бұрын
That's a great question. We actually just did this and posted it on our IG channel (link below). Thanks for watching. instagram.com/p/CLCQ0-vjKXD/
@kawasaki0000000000003 жыл бұрын
@@Shoptoolreviews thats awsome thanks for the reply . I bought a sent of matco ones years ago because they were the smallest I could find . Now this can be a option . I wonder if they sell head repair kits .
@theone68053 жыл бұрын
Now milwaukee just need flex head and they are in the ratchet game
@Shoptoolreviews3 жыл бұрын
We agree! Would love to see some flex-head ratchets and swivel sockets. Thanks for watching.
@apolinarponce45063 жыл бұрын
Where can I pick them up ?
@Shoptoolreviews3 жыл бұрын
You can't, yet. Coming later this year. Thanks for watching.
@canoeshoe3 жыл бұрын
i love all chrome, cant stand plastic handles
@Shoptoolreviews3 жыл бұрын
Comfort grips are nice, but we typically grab the all-chrome handles as well. Thanks for watching.
@nuclearexplosion58413 жыл бұрын
Comfort handles are ok, straight steel is better
@danielboone943 жыл бұрын
Quick release variant!!!
@renski89763 жыл бұрын
At that point just get a little palm ratchet.
@anthonygm853 жыл бұрын
Internals look just like SK's lp90 line
@7dioclau3 жыл бұрын
True looks so much like S&k. Especially with no soft grip👍
@Shoptoolreviews3 жыл бұрын
It does look a lot like the SK. Thanks for watching.
@PatriotPaulUSA3 жыл бұрын
I wonder who is making all these Taiwanese hand tools for Dewalt, Milwaukee, etc. The biggest problem I see with all these new brand names besides availability, is getting them warrantied and wondering weather they will be making hand tools with their name on them in 5 - 10 yrs. That said these do look like a very nice ratchet, and for once it doesn't have that awful snap on style round handle grip.
@rookiexreviews3 жыл бұрын
Prices not tee bag at wall nottt teee bagg
@emmanuelmota13 жыл бұрын
Time for a quality microphone my friend.
@FusionBoost2.03 жыл бұрын
For that money, your better off with Carlyle, Gearwrench or Tekton I'd say...
@jameselam82633 жыл бұрын
Not really. Tests show all those fail at a lower torque rate than Milwaukee. The long term durability I'm not sure of but they are all lifetime warranty.
@FusionBoost2.03 жыл бұрын
@@jameselam8263 their all within spitting distance of each other, and Tekton I think it's the strongest of the bunch even though the internals in all these Taiwan ratchets are basically the same. One test does not mean anything though in reality... Plus Milwaukee the Gearwrench and Carlyle will be more easily warrantied IMO... Every town has a Napa basically and more stores sell Gearwrench then Milwaukee... And Tekton well take a picture, boom new ratchet in 2 days.
@guyconnell22503 жыл бұрын
LOL. I don't think I have ever grunted when using a cheater pipe.
@Shoptoolreviews3 жыл бұрын
And we even took some audio out of it. I think it was because the cheater bar was in my gut.
@juanc51493 жыл бұрын
400 hhhuunnnnnfffffs Isn’t bad at all.
@Shoptoolreviews3 жыл бұрын
Oh man, I see what you did. lol. I deserve it. I shouldn't have had that cheater bar in my gut. Thanks for watching.
@salvadordelira30123 жыл бұрын
These definitely are not as good as Snap-on but for the money I bet you can’t complain!
@cesarconh8953 жыл бұрын
Already have my SnapOn ratchets, no thanks
@Shoptoolreviews3 жыл бұрын
It's hard to beat Snappy ratchets and wrenches. Hate the prices, but performance is pretty awesome. Thanks for watching.
@GlockMan-oj2ik3 жыл бұрын
I have 3 1/4 inch snap on ratchets and all of them are slipping and the local snap on dealer won’t come by my shop and warranty them because I don’t owe him any money
@andrewscott88923 жыл бұрын
This is not bad pricing at all, which is surprising... My only gripe is the, made in china....
@dazamanday3 жыл бұрын
Nothing wrong with made in China as long as it was designed somewhere else.
@andrewscott88923 жыл бұрын
@@dazamanday made in Taiwan is good, made in China is a no go for me and it's more of a values issue then quality, I try to make sure I give the CCP as little money as possible
@Denverscorpio2 жыл бұрын
Made in usa? If not, not interested!
@CCxKiller133 жыл бұрын
Worthless without a warranty
@Shoptoolreviews3 жыл бұрын
?? They have a lifetime warranty. Thanks for watching.
@CCxKiller133 жыл бұрын
@@Shoptoolreviews I doubt it "Every MILWAUKEE hand tool is warranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain exceptions, MILWAUKEE will repair or replace any hand tool which, after examination, is determined by MILWAUKEE to be defective in material or workmanship for the lifetime of the tool. Return the hand tool product to a MILWAUKEE factory Service Center location freight prepaid and insured, is required. A copy of the proof of purchase should be included with the return product. This warranty does not apply to damage that MILWAUKEE determines to be from, misuse, alterations, abuse, normal wear and tear, lack of maintenance or accidents."
@CCxKiller133 жыл бұрын
@@Shoptoolreviews sorry this quote "Every MILWAUKEE Mechanics Hand Tool (see list on www.milwaukeetool.com) is guaranteed to be free from defects in material and workmanship during the useful life of the product. MILWAUKEE will replace any Mechanics Hand Tool that is determined by MILWAUKEE to be defective in material or workmanship during the useful lifetime of the Mechanics Hand Tool. Damage caused by ordinary wear and tear, misuse, alterations, abuse, lack of maintenance, or accidents is not covered by this guarantee
@25centsapop3 жыл бұрын
Also how much do you weigh? Lol
@Shoptoolreviews3 жыл бұрын
About 15 grams. Thanks for watching.
@abcd999493 жыл бұрын
堪用品
@horacerumpole69123 жыл бұрын
Paid for content-
@Shoptoolreviews3 жыл бұрын
Congratulations, you are incorrect. Yes, we received the tools at no cost, but it was not paid content. We'll let that be your little secret.