They've done it AGAIN! EVERYTHING you need to know about the LIAN LI O11 MINI

[@Dawelio]

From someone who has been following many of the bigger tech KZbin channels (LinusTechTips, JayzTwoCents, Bitwit, OptimumTech, HardwareCanucks, GamersNexus etc) for a few years, this is the first video I've seen of yours and I just had to comment on it. I take my hat off to you sir, this video of yours leaves you just speechless. Absolutely out of this world informative, nice, clean and professional looking editing and the amount of information that you have, how indepth you are in this video is just insane. Absolutely well done and a truly well deserved likes on this video (not sure how those 35 dislikes as of writing this comment can even be there, have those people even watched the video?...) Fantastic work, keep it up!

[@GGFEvents]

Thank you :)

[@AP-lh1bq]

Yes. This 👆

[@BM3000]

This is such an incredible video. It made planning my custom loop so much easier. Still can't believe someone made such an indepth review of the case. And even videos for build examples.

[@dymONEee]

The only video where you can find all necessary information regarding dimensions and WC parts possibilities. Awesome and Thank you !

[@timojokilehto2482]

I was trying to find info on clearances, very vague and conflicting information everywhere. Then I remembered GGF Events, NO case rewiew even comes close to yours when it comes to details! Thanks! You just literaly saved me time and money!

[@GGFEvents]

Thank you

[@chairman67]

What an awesome chassis.. and your review is an excellent video covering every detail and aspect. Thanks for reviewing it in the way that you do !

[@Houssam0691]

even though this video is 3 years old at this point , i find it just incredible the amount of information and detail is unmatched . hats off to you sir

[@GGFEvents]

Thank you

[@imaaron7550]

Next level intro 👌

[@lethalpeaches5431]

I agree, intro was fire 🔥

[@silverflash1675]

Insaneee🔥🔥🔥

[@ChatGTA345]

This is such a detailed video, thank you!! Especially the information about clearances was next to impossible to find anywhere else, this answered so many questions! And it really helped me make a decision to preorder this particular case, over many others.

[@GGFEvents]

Thank you. Glad you enjoyed it

[@badmeme6801]

Bruhhh this case is insane! So many amazing features, all at just $100. I just bought the regular version, although I think I'm gonna stick with it because I could uses that space for more water-cooling support. Great review!

[@BARBELLS-AND-BUDS]

This is an old video I know, but I just wanted to say thanks for taking the time to do so many different builds and show all the compatibility options with these cases. I end up doing the small form factor cooler Master case and I left this sitting in the box and 4 years later. Now I decided to go ahead and build. In this case it's cool to see all the options

[@jonathanandrews6077]

Certainly the most comprehensive view seen of the case. Great intro etc. First of your videos I have seen.

[@sabedin777]

honestly one of the best builds ever seen so far

[@Randomguy_1911]

Probably the most informative video i've seen about a case and its options. well done.

[@IamY00t]

Best review I've found of this case. Well done with actual messurements

[@hibiscuscola3169]

that build is sick man, I've been considering this case ever since they announced it 2 years ago, now I think it's time to buy one for my new build

[@promaker1458]

You neex SFX psu - keep that in mind

[@sibigurung1164]

That's what's stopping me too SFX psu

[@hibiscuscola3169]

@@promaker1458 I knew that, I'm using N case M1 now, I will just move my whole system into this new case when it arrives. But thank you anyway

[@blackmennewstyle]

Very interesting case

[@AND1TFC]

There's no way I just found your channel, it's so good!!

[@GGFEvents]

Thank you

[@tonydarre9954]

I had only seen your build videos previously. Your reviews are just as good. Thanks for the great content

[@itskidkelly]

I preordered mine before The trailer Lian Li made finished. I’m SOOO excited to get this case- it will be the home of my first build.

[@cesarcortes77]

Great video! The actual editing itself was badass. The information given was top tier. Enjoyed it very much, thank you.

[@GGFEvents]

Thank you

[@scottmillsjr.1877]

you give really good information on this case. Looking to build my first O11 Mini. Trying to plan out what to fit in it. All the information you have given is going to make it easier to plan.

[@utubeb14]

most detailed review I've seen seen on this!

[@Obi_4xe]

Been waiting for months for this case. Pre-ordered!

[@grandpixel]

Beautiful review! Thank you for testing radiator clearances in every configuration!

[@NeverTalkToCops1]

A most excellent review of the capabilities of this case. Thank you. Lian Li should pay you big bucks for your work!

[@I5-20VT]

This is the best place for reviews that takes the water cooling aspect seriously. So thank you Stu! That being said, I waited so long for the Mini so I finally caved in and bought a regular Dynamic a month ago. Oh, well...

[@GGFEvents]

Thank you!

[@CarthSader]

Sincerely, your channel deserves more subs. Great video on the case. Thank you.

[@EnduroPM]

The best Review i have ever seen.

[@Schaweitzer]

man..this case just look so awesome with any build..

[@NexusVibee]

Nice! Great VIdeo as always GGF!

[@frikkievuiltrens]

Brilliant review; awesome case; beautiful build. Just a pity about the omission of a reset button, some games still has a tendency to lock up your system and I've heard/read that doing a reset is electronically still best for your storage device.

[@kennmelksham]

Outstanding review. Fellow Aussie. Answered all of my questions. THANKYOU!

[@GGFEvents]

Thank you

[@SuliusLp]

Crazy what this case can fit!

[@c4monkey]

Amazing video. I love all of the measurements and config testing. This is exactly what I like to see

[@skullz8946]

Mind blowing, a definite trend setter here.

[@RyanFechner]

Great video, answered lots of questions I was wondering about.

[@Squinoogle]

I've said it before but I'll say it again: If I didn't already have an O11D, I'd be all over this! So many options, it's great to see you going over them all. I think you've pretty much nailed the ideal ITX configuration there, although I'd love to see a build with the vertical mount :)

[@qq312qq]

This is the way case review is done. Thanks :)

[@thebmxreviewer]

Wow, I've literally been saying I love the 011 but it's too big, this is perfect minus the sfx/sfxl psu limit. Thanks and great review, very extensive and you tried all different kinds of AIO positions/sizes, and lots more. Subbed

[@V1N_574]

Excellent video and wonderful case, hope I can find a client that wants a build with it so I can have a first hand experience with it.

[@simoSLJ89]

Sad for not supporting atx psu. It would have been an amazing case.

[@DEATHTRUTH]

These are going to sell so damn well.

[@JohnKimbler]

I really appreciate the time and effort you put into a review like this one!

[@umitakkaya]

Really nice coverage, cheers mate.

[@celsoesparza2387]

This man just made a complete indepth tutorial on everyhing the case can do. He goes more in depth the gamerznexus. I wonder how this man could review a usb drive

[@rickysargulesh1053]

Loving that hidden soft tube

[@giftedcracker]

Ive been following the updates on this case since CES 2019. They've been announcing it and delaying it every month since May. Very frustrating but I'm glad its finally coming out. I'll be getting one. Assuming they have stock

[@abecker1028]

Oh man I’m definitely doing that EK distro plate. So sick that you can see through the perforations on the side of the case

[@chitolocz]

Its a flat reservoir. EK supposedly working on distribution plate. www.ekwb.com/news/ek-reshapes-your-perception-of-reservoirs-with-flat-d-rgb-models/

[@tomikivela7634]

Excellent review, very in depth, thanks!

[@Asenni]

Great showcase and review, thanks!

[@Datalore2371]

A SF600W Plat with a B550A PRO, 5600X, and 3070 should be fine in this case right?

[@Famouzak]

Omg.. thanks for the effort making this review. Youre awesome.. It cover all the information i need. I Definitely want this case.

[@thebmxreviewer]

Could an ATX PSU be easily modded in somehow?

[@Slicktune]

Why won't this guy answer, this is crucial

[@Supremepikachu]

I tried this but there is just no way, i could only place the ATX under the gpu but it didn't look good. So it's SFX or nothing.

[@RussellKasem]

Are you going to do a rundown of the Meshify 2 XL? I've been waiting for someone to do a radiator clearance video for that case.

[@parthkharwar69]

This is a really great and detailed review!

[@daviniarobbins9298]

I got the snow white version. If you got this case I recommend installing a micro ATX motherboard in the 5 slot mode because if you install full size ATX in 7 slot mode you are really limited in radiator options as you can't install an 240/280/360 AIO in the roof without using an bracket adaptor. Also bear in mind that space in the back is limited. I had to remove the 3.5" drive caddy to get things like fan/rgb hubs to fit. You can only install SFX PSUs in this case. Edit: I forgot to add I have a 280 AIO installed in the roof and it was still a tight fit as the CPU cables got in the way. It fits but I had to move the cables as far left as they will go. A 360 will fit but you can't use cable combs. Something to bear in mind there.

[@jahskin2887]

this case wins my “most flexible case” award

[@Joe-hb6ek]

Same but whats with the XL?

[@H3llb0und]

Doesn't take an ATX PSU. No sale

[@Joe-hb6ek]

@@H3llb0undyea. But if you want a case with atx psu. Go with the Lian Li PC-O11D

[@H3llb0und]

@@Joe-hb6ek No thanks, that one also has that useless front glass panel. That's why I got the O11-AIR instead.

[@Joe-hb6ek]

@@H3llb0und oh ok. This case looks great too.

[@kanethomo2483]

I only just built in the original o11 but definitely going to pick this bad boy up for a build in the future !

[@wilko2907]

Huge fan of your builds inspired my build a lot thank you

[@yohanes2034]

The exterior looks exquisite even better than the O11D and the XL version. I hope they refresh the big brother with modern look next year.

[@Manu-yv1jt]

Why no ATX psu??? Sfx for a "normal big" case??? I m sad to see this, was very interested in that case :(

[@Kizzster]

Coolermaster 850w SFX should be good enough

[@promaker1458]

@@Kizzster That PSU cost 270$ more then 2 cases 🤦🏻‍♂️

[@Alex-rf4wu]

Exactly! I was very disappointed to see this.

[@heyitsporo]

@@Kizzster resellers make it 200$ I just bought one for 137$ on blt

[@Kizzster]

@@heyitsporo Nice

[@michaelknight2897]

Will EKWB be making a custom distribution plate?

[@PlaCrown]

You have excellent reviews.

[@GGFEvents]

Thank you

[@promaker1458]

Can you explain why DDC pump will be better option for this case?

[@itzjustchris1618]

Can't wait for your ATX build!

[@herculesperseus6326]

Awesome chassis, shame it doesn't accommodate ATX PSU.

[@Kiserai90]

Let's be honest though, this was really meant to be a small form factor chassis.

[@Redavv]

@@Kiserai90 but its not really small factor i can see a lot o places that they could make room for a atx psu especially since the went almost full modular case, NZXT H1 is small factor this is a not even a mini they just downsized a case

[@MrSilverPants68]

Why do u need an ATX power supply when SFX now goes to 850 watt?

[@3lDuK371]

@@Redavv if you want an ATX power supply just buy the standard O11 Dynamic, this case is perfectly fine with SFX

[@mob5613]

@@MrSilverPants68 I just got the 850w cooler master SFX PSU

[@Adel-sj4ue]

What a review!!!!!!! Thanks man U r the best

[@donolee]

thank you so much for putting this video together... you got yourself a new sub!

[@whirledpeaz5758]

A SnowBlind like mod to this case would be some serious eye candy.

[@frederickpolk]

Awesome coverage. My suggestion: Please use on-screen numbering to show the different layout configurations with an image and number call back when mentioning if possible. Otherwise, great work! Thank you for your coverage of the case!

[@SirChocula]

Fantastic case review btw, incredibly informative! Your camera production is on par with Hardware Canucks! :D

[@GGFEvents]

Thank you

[@davidtran6851]

Amazing case. Thanks for the indepth review, thanks to your review its a solid yes from me. Waiting for nz to get stock

[@gacekk87]

Ok, so it does fit 360 aio on top with ATX motherboard? Still with fans on bottom? How about ATX motherboard vertical GPU mount with RTX 3070?

[@anthonycoffey816]

Very detailed, very informative!

[@xs3tsunax]

this case is already available in my country. along with the 215. very tempted to get this case

[@ronakparikh]

Idk what you are talking about, but the kind of oled that was on the o11 mini prototype was one of the $5 i2c oled screens not some $800 or $50 screen. They definitely removed it to cut costs over large volumes though and keep it under $100 and to not draw sales away from their more expensive cases

[@chitolocz]

5:19AM here in CA. Haven't slept tryna get my pre-order lol

[@mob5613]

Any idea where I can put in an order ?

[@chitolocz]

@@mob5613 if you live in the US its sold at Newegg, but won't be back in stock until Dec 11th. This reddit link includes international retailers that sell it. www.reddit.com/r/buildapc/comments/izuxy2/lian_li_pco11_mini_updates_megathread_live_update/?

[@DM72513]

F in chat for the ATX Motherboard Support paired with SFX PSU....

[@Kizzster]

Looks like Coolermaster 850w SFX power supply is needed or 2 of them 😂

[@Supden90]

Great video and thank you for the useful information

[@liammilk5802]

Does it come with fans?

[@ToutengHawj]

The video i need to see about watercooled o11 mini can't wait to see full atx build watercooled + vertical gpu.

[@nickfoote6707]

For the sake of 2mm they couldn't have made it a touch taller to fit standard fans under the vertical GPU mount in mATX config?

[@welshmouse]

Super tempted by this case, but mainly for the upcoming distro plate. Do you think its likely that a front distro plate pump would have enough space with a bottom mounted 360mm and side 240/280? It's hard to see what space would be left with both of these spaces fully occupied

[@-isisturfister-]

Great case but why doesn't it support atx psus

[@Pma_Spartan_507]

excellent explanation Greetings from Panama

[@MiyabiJNEP]

Good review! Thank you so much

[@Kiserai90]

Pre-ordered mine in black, going to do a mITX water cooler build

[@jamesonly4835]

wait it doesn't fit a seasonic 750w 80 platnium atx psu ? :(

[@cheesyriceo4]

The most in-depth review I've seen so far. Thank you. Very interested in running push/pull with 25mm fans on top, front, and side, with an ITX motherboard. Hoping it's possible if we run one rear space above and One Be Lo

[@MrScart35]

Just why they had to go with SFX PSU? Couldn't they make the case 2cm wider to accomodate ATX PSU? Too big for SFF people and avarage crowd won't touch it because of the PSU limitations.

[@ve110cet]

Amazing! Because of this review, I bought the case. Can you review the EK Distro plate for this? I see you've used it in your snow white build, but you didn't mention much about it beyond that you swapped the o-ring and screws. I'm particularly interested in radiator configurations with it installed.

[@codeforgames]

The best review. I'm thinking of pushing the ATX power supply in front where the glass is. Instead of 2 fans. 🤔

[@schwoin8652]

Finally 👍🏻 thumbs up and enjoy later 😄

[@mob5613]

When does this come out in Canada ?

[@LRRPEXILE]

Very impressed with your detailed video review! - The best by far in KZbin period!... I have the 011D, but I want this case which wasn't available yet. Where can I get this now?!

[@TheRealYann]

Awesome build, what did you use to cover the fanstickers on the back of the Unifan?

[@elysiumcore]

I don't think I have ever seen a case like this 🔥 - I want to build a vertical mount Gpu / Atx with a 240 / 280 Aio - fans intake at bottom - this is seriously bad ass..ps your level of description and video quality is superb mate 🙏

[@asjadmemoon]

I have 10 fans(corsair LL120 X3 , lia sli uni X3 fans , Aigo 120mm X4) and a lian li o11 dynamic xl rog edition please tell me the best fan configuration for low temps(like which side i use as intake and exhaust)🙏.

[@simoSLJ89]

If aircooled: side and bottom intake, top and rear exhaust. If aio: same, with 360 rad on top as exhaust. I have LL as case fans too, but don't use them on rad/heatsink (Uni are better, but I don't know the Aigo performance).

[@asjadmemoon]

@@simoSLJ89 thanks man,

[@TioAe]

Amazing video, breathtaking Showcase Build, very versatile case but the SFX PSU is a deal breaker for me :( I was looking to upgrade to this case but don't want to buy a new psu just for it..

[@cwill2127]

Lmao the sfx psu is the only ‘mini’ part of this case

[@saytoecharles6776]

@@cwill2127 And the fact that it is the smallest O11

[@simoSLJ89]

Exactly. Room for so many rads,170mm aircooler and not for an atx psu??

[@grimm6jack]

@@simoSLJ89 Yes, if you want all those big aircoolers, atx motherboards and/or PSUs, go buy a mid-tower, not this. This is really good for what it offers. Small, 9 fans, big aircoolers and lots of radiator support. SFX PSUs are the future.

[@simoSLJ89]

@@grimm6jack Of course, I have an O11 XL because of that. The fact here is that there's no need for so many rads if the most powerful psu I can use is a 750W sfx (at the moment it's the max you can get in that format).

[@k3nnyw0w]

1:52 where did the dog go there? :D