This Budget 3d Printer Raises The Bar (Bambu Lab A1 Mini & AMS Lite)

  Рет қаралды 64,449

ModBot

ModBot

Күн бұрын

Пікірлер: 190
@tomaskianicka3343
@tomaskianicka3343 Жыл бұрын
0:30 A small correction: P1S with AMS is $949, P1S without AMS is $699
@wildwoodcaleb3129
@wildwoodcaleb3129 Жыл бұрын
I noticed that too
@ModBotArmy
@ModBotArmy Жыл бұрын
Idk how I missed that 😣. Will pin this. Thanks! 👍
@themountain59
@themountain59 Жыл бұрын
Bambu Lab P1P 3D Printer $599.00 USD from their website🤔
@dannonyogurt98
@dannonyogurt98 Жыл бұрын
Beat me to it, I just came down here to say that too. When I heard that I was like wow that is impressively wrong lol.
@ModBotArmy
@ModBotArmy Жыл бұрын
Yeah I had been starting at my script for hours and ready through it multiple times. I think my focus was on all the technical data on the printer. If nothing else it drives my point home in that it the combo is not a budget 3d printer. @@dannonyogurt98
@emilcost8613
@emilcost8613 Жыл бұрын
This printer will make the hobby mainstream. The decision to design and market this printer, demonstrates top tier class in the design and marketing teams. Brilliant move Bambo Lab!
@christoskaragiannis7973
@christoskaragiannis7973 Жыл бұрын
Even though I've seen 3 reviews of this machine already, your take on it was spot on, easy to listen to, and gave me additional information even now that I know most things about this machine. Thanks for the great job as always!
@goosenman2
@goosenman2 Жыл бұрын
This is the first review I've watched (out of four I think) that actually mentioned that this wasn't compatible with the full scale AMS, and vice versa. Thank you for that.
@ac556er
@ac556er Жыл бұрын
I have watched three other reviews and this is the best of the bunch, you went into the print head and none of the others even mentioned anything about it.
@ModBotArmy
@ModBotArmy Жыл бұрын
Thank you. I spent a lot of time putting this together and felt like the details included where needed to tell the full story. I am glad to hear it was worth the added info.
@TheCleon
@TheCleon 6 ай бұрын
This printer is a beast
@pangrac1
@pangrac1 Жыл бұрын
Best review of the all. You showed all that details which everybody else missed. 👍
@aqhan
@aqhan Жыл бұрын
I'm waiting for this printer to be delivered. I noticed that there are two inputs for the AMS system on the printer, so fingers crossed we will soon be able to purchase just the AMS lite and connect for 8 colour printing!
@technicallyreal
@technicallyreal Жыл бұрын
Thank you for showing the details like the nozzle wiper and the sensor that used to adjust pressure advance. First video I've seen to show details like this, which I'm always fascinated to see.
@earlowens998
@earlowens998 Жыл бұрын
I have the A1 Mini on order. I was happy to see it can also be used without the AMS. Yay for the touch screen.
@IrocZIV
@IrocZIV Жыл бұрын
I wonder if you can run the AMS lit upside-down, so you could screw it to the underside of a shelf above the unit. Then you wouldn't need to change the length of the bowden tubes.
@Mr.X3D
@Mr.X3D Жыл бұрын
My first thought exactly. Seems viable! 👍
@Wynand4
@Wynand4 Жыл бұрын
Wondering the same thing as well. That connector cable from the ams to the printer just seems short so maybe an extention (diy or bambu) might be needed
@scrummyvision
@scrummyvision Жыл бұрын
neat idea
@vecchiarelli7928
@vecchiarelli7928 Жыл бұрын
I'm also wondering the same thing. Bambu Lab sells longer cables for the standard AMS and it looks like they are using the exact same cable on the AMS Lite, so as long as it will run upside down it should work. The price point makes the A1 Mini Combo hard to pass up but the footprint is a turn off. @@Wynand4
@vladonizer
@vladonizer Жыл бұрын
This has been done and confirmed now, if you haven't seen. Someone made a bracket that mounts it above, upside down
@GTW-1807
@GTW-1807 Жыл бұрын
Great video as usual! Of all the videos that I have watched on the A1 w/ams your the first person that mentions the amount of width that you would need to setup printer/ams! Kudoos to you. 27" is not workable in many instances where you have other printers. Another downside of the AMS is that it is open air. I can see people purchasing this and then loading up the 4 spools and leaving them on not realizing that depending on humidity they are going to have issues with wet filament..
@Raytenecks
@Raytenecks Жыл бұрын
Ugh, that thing is so amazing. I can't wait until a lot of those features come to Vorons. If I didn't already have 2 Vorons, I'd buy this instantly.
@reprinted3D
@reprinted3D Жыл бұрын
Great review. You're the only one so far to mention the rework of the hot end, even though most others talked about having issues printing the mouse project.
@dariussteele3843
@dariussteele3843 Жыл бұрын
Thank you sir for actually providing a review with actual information and details.
@pmcquay1
@pmcquay1 Жыл бұрын
This appears to be an extremely well thought out system. The calibrations and hotend swapping in particular are really impressive to me. I like how everything follows a logical flow, and how they are using the force sensor to do flow calibration. Really hoped the prusa mk4 was going to do that. Also hope it trickles down into the open source world with klipper and marlin. This is a very compelling machine for a new user or someone who is not wanting to tinker. That said, for anything other than pla, petg, and the harder flexibles, this machine is not optimal. Ive heard that it only goes to 80c on the bed, which is not enough for any engineering filament, and barely enough for petg. It is obviously not enclosed, which means it wont be able to print abs, asa, or any sort of nylon or polycarbonate. I am not a fan of cloud services for physical objects that I purchase, and would not use it if I were to buy this thing, so really all of that work on their part doesnt help me, and could have been spent making better or cheaper printers. Also not a fan of any sort of vendor lock in or remote control/remote software changing without my permission. Especially on a device capable of burning my house down. Ill not be purchasing this or likely any other bambu printer, but I am glad that there is a player in the market innovating on these old designs and forcing the other players to compete.
@liamventer
@liamventer Жыл бұрын
Prusa are already using a load cell for Z probing in the NEXT extruder and have said they will use this for other functions in the future too. Klipper also already has options for using a load cell for doing Z probing.
@pmcquay1
@pmcquay1 Жыл бұрын
@@liamventer right, but my point was theyre not using it to do anything but bed levelling yet.
@liamventer
@liamventer Жыл бұрын
@@pmcquay1Your right. It seems that Prusa's pace of development is slow or conversely Bambu Labs is very fast.
@hassosigbjoernson5738
@hassosigbjoernson5738 Жыл бұрын
On top: an enclosure should always be considered! Not only for more materials but also because of fumes, air quality and noise. Some kind of filter (like a Bento Box) should always be considered ... especially for printing materials like ASA and ABS.
@glensmith-or1bp
@glensmith-or1bp Жыл бұрын
I sort of cheated and took 2 Laser engraver enclosures I had laying around 1 of which is a Two Tree's brand very heavy duty fire resistant enclosure and cut them both up to fit the A1 Mini w/AMS Lite. I am only using PLA right now but it works well I have a front zipper that get 3/4 of the front and then almost all of the top middle area open's up. I would post a picture but dont think I can but it works well. Then of course had to line the LED lights inside the top edge to give me light. I figured that I go all through the hassle of keeping all my stock of filament in a special container might as well do the same here. I keep 1 Eva dry desicant holder inside the enclosure to keep the moisture out.
@avejst
@avejst Жыл бұрын
Great video as always. Good views of the printer Thanks for sharing your experience with All of us 👍😀
@Walt1119
@Walt1119 Жыл бұрын
Great review as always! This is another amazing Bambu product, they just keep knocking it out of the park! I’d grab one of these but my next one will be the P1S/AMS. Thanks for sharing! Ur channel is great!
@Landos_authentic
@Landos_authentic Жыл бұрын
I bought a P1s and I love it, my only worry is because it’s not open source will parts be hard to get a couple years from now? I really like what Bambulabs is doing, being able to send my prints from my computer or my phone is super convenient, no need to use an SDcard. So far my P1s combo has been super reliable. After getting my P1s all my other printers have been collecting dust.
@dark_xdark132
@dark_xdark132 Жыл бұрын
Cloning nozzles are everywhere in China,If bambu quit from the market, it promises that all products will be open source
@crosswalkguy435
@crosswalkguy435 Жыл бұрын
Thank you! I am eagerly waiting for the pre-order to come up again. I have 2 X1Cs, with AMSs, and this will be my next printer. It just makes sense... Where did that skull with a beard come from!?!
@AlfredoAntonioMartinez
@AlfredoAntonioMartinez Жыл бұрын
Ok, this brand rise the bar ALOT, I think that Josef will got nightmares. XD Thanks ModBot for this excellent review and so detailed info about every detail and part of the printer, you have done an excellent and profesional job here!.
@voxelmaniam
@voxelmaniam Жыл бұрын
After seeing the A1 at ERRF and the print samples coming off the machine as I watched, I placed an order for one as soon as orders opened on October 16th. Relating to your comment about placing the printer in an enclosure, what are the restrictions on the lengths of the Bowden tubes leading from the Mini-AMS? I envision placing the Mini-AMS on top of the 3D Sorcerer enclosure that I use.
@K8Stuff
@K8Stuff Жыл бұрын
I noticed the mouse prints with cubic infill - that's probably the worst infill for delicate prints as the nozle wipes over the infill. Maybe try changing it to Adaptive Cubic, Gyroid etc.
@Dylan-xv9hx
@Dylan-xv9hx Жыл бұрын
For some reason the default profiles for bambu slicer all use cubic infill and it even becomes a problem for larger prints. I always make sure I have gyroid selected when setting up a new print profile.
@dexter-wy5bo
@dexter-wy5bo Жыл бұрын
Can you please show the full loading and unloading/changing rolls of filament on the AMS Lite? Changing with filament still in the PTFE, not when it's run out. Would like to see how much the AMS Lite retracts it automatically/how much you have to pull out and respool, etc...
@jon9947
@jon9947 Жыл бұрын
Was not the Bambu printer I was hoping would be released next, but still very neat and going to bring a whole lot of new people to the hobby.
@ModBotArmy
@ModBotArmy Жыл бұрын
I think your feeling are mirrored by many. Hell until I got the brief if you had asked me to guess what their next printer would look like I would have been way off. Agreed though, to an extent it almost feels like cheating. Not having to do even a z offset is not something I am used to.
@0101UnknownUser
@0101UnknownUser Жыл бұрын
Ahhh, if this was available when I got my v1 Ender 3 I would have jumped at it.. I wouldn’t have learnt to tinker though but I wouldn’t have had soo much frustration either. Sweet machine.
@Landos_authentic
@Landos_authentic Жыл бұрын
I feel you, i wish Bambulabs was around when I bought my older printers. Although I’m very happy I got to learn how to print the hard way with my ender3 v2 and my Flsun qqs pro. I don’t regret buying the P1s it’s definitely worth getting. I plan on selling my ender3 v2 and my Kingroon printers so I can buy me an A1 combo.
@javi2001
@javi2001 Жыл бұрын
I am absolutely blown away with this printer and this company. I bought an anet A8 +5 years ago, and it's crazy that now, for ~150$ more you can buy a printer that has absolutely nothing to do with the anet. It's like comparing a horse carriage with a modern car. I cannot comprehend how it's possible to pack that much technology into a 350$ printer.
@javi2001
@javi2001 Жыл бұрын
Manual leveling on the anet drives me crazy
@mirkyd5944
@mirkyd5944 Жыл бұрын
Am I right in saying this hasn't even released yet? If so, there are sooooo many comments from people saying they didn't like it and recommending Prusa instead, which makes me think there is some sort of bot/astroturfing thing going on. I'm currently using my friends OG Ender 3 and I'm enjoying it. Mainly for printing terrain for wargaming and also dipping my toes into printing minis as I don't want the hassle lf dealing with resin and I live in the UK where the temperature in my garage is going to be too low for resin printing most of the year. The easily swappable nozzle/hotend in this excites me for that reason! Do they come with 0.2mm nozzles, or are they available to order? Have you tried printing something with a bit more fine detail?
@mirkyd5944
@mirkyd5944 Жыл бұрын
Oooops, I posted this comment before the end of the video and just saw you already mentioned about the nozzle availability. Thanks!
@dirediredude
@dirediredude Жыл бұрын
Awesome video and overview. I'm in the market for a new printer coming from an Ender 3 V2 workhorse and honestly the biggest thing holding me up is the footprint. I love the idea of the mini because it's smaller but if I were to go AMS or even upgrade later I might as well just get the P1S because it's a smaller more compact machine. That's a bit odd to me. I almost would have rather had them design some sort of cage or shell for this that the existing AMS would have worked with on top.
@sardarg9328
@sardarg9328 Жыл бұрын
The A1 minis transition from high to low-priced printing is a bold move, but its all about execution
@littlebittygames2395
@littlebittygames2395 Жыл бұрын
I'm very excited for the nozzles I hope they can make them work with there machines somehow!
@snooki9
@snooki9 6 ай бұрын
Nice vidéo 👍 I have a sidewinder X2 bought 3 years ago. This look so much easier to run (no plate levelling which is a nightmare for example). Is it as simple as it looks ?
@crowguy506
@crowguy506 Жыл бұрын
No one mentioned the mega combo, which already includes o,2 Stainless and 0,4+0,6 hardened steel nozzles.
@ModBotArmy
@ModBotArmy Жыл бұрын
It didn’t exist. This video was done prior to launch. 😊
@ModBotArmy
@ModBotArmy Жыл бұрын
All of the videos that are edited where made prior to launch so we didn’t know the product page combos 👍
@FARUK00011-g
@FARUK00011-g Жыл бұрын
Overall recommended. The disadvantage is that there is no open source and it is inconvenient to buy accessories and modify it by yourself.
@TripodsGarage
@TripodsGarage Жыл бұрын
Great review bud!
@ModBotArmy
@ModBotArmy Жыл бұрын
Thanks man :)
@mouhabuntu
@mouhabuntu Жыл бұрын
Amazing video🎉😅
@Griff_78
@Griff_78 Жыл бұрын
What is the brand and color of the filament used for the hair\beard of the skull you showed around 16:23? That's a pretty sick color! Thanks for the great review by the way! You included quite a bit of info that other reviewers didn't.
@charlesrestivo870
@charlesrestivo870 Жыл бұрын
Great video
@HeathNielsen
@HeathNielsen Жыл бұрын
I would like to know how well it prints the materials they don't recommend. But the document says it supports?
@thegps7197
@thegps7197 Жыл бұрын
Not sure if it does have a Eddie current sensor underneath. Vector 3d took apart the printer and it has no electronics in that circularly part. Maybe something in the future or they removed it in development. Top quality video as always. Another disruptive printer from bambu. Not a printer I would purchase but I can certainly see this appealing to new comers.
@ModBotArmy
@ModBotArmy Жыл бұрын
Someone else commented that so I went to see his video. I reached out to see what they say. I had asked some questions about it during testing so I am confused. Another person said it still has an Eddie current sensor but it’s located higher up. Hopefully I’ll get an answer soon.
@solutions1012
@solutions1012 Жыл бұрын
hey modbot!, love your videos
@technobuff79
@technobuff79 Жыл бұрын
I’m wondering if the 250g Sunlu PLA will work on the AMS Light? Would be very handy for those wanting to get lots of colours but don’t want to purchase in 1kg pack.
@danjmc35
@danjmc35 Жыл бұрын
Is this an upgrade from am ender 3
@cosminlesutan3574
@cosminlesutan3574 Жыл бұрын
I don't think the AMD Lite can be mounted somewhere else... The spools are color coded based on the length of tube they feed into since the retraction is handled by springs. Moving it on top may requier spring changes in the AMS to compensate for the extra friction
@ModBotArmy
@ModBotArmy Жыл бұрын
You may be right. I still won't rule it out. AMS to Hydra mod was a pretty big conversion so there could be something similar that uses the primary components of the Lite but also mods them a bit.
@ModBotArmy
@ModBotArmy Жыл бұрын
Although I hope that is not needed.
@dangerous8333
@dangerous8333 Жыл бұрын
I doubt that.
@xXP1ZZAxD3MONXx
@xXP1ZZAxD3MONXx Жыл бұрын
the "Mega Combo" has hardened steel hotends, are they worth it? i assume the default is just brass.
@ModBotArmy
@ModBotArmy Жыл бұрын
If you want to print abrasives it is worth getting. Based on the stock nozzle color it looks like copper but it could be a plated brass I suppose.
@mythpaad8727
@mythpaad8727 Жыл бұрын
The A1 mini seems to have a lot of potential, but its essential to address its shortcomings.
@liamventer
@liamventer Жыл бұрын
Vector3D's teardown shows there is no sensor fitted where you indicate the eddy sensor is. I am guessing they were planning to use an eddy senor there As a z sensor but are instead also using the strain gauge for Z probing.😢
@ModBotArmy
@ModBotArmy Жыл бұрын
That’s wild. I just looked into that part of his tear down. I even asked a few questions about the sensor during my testing. I will send an email today for clarity with a screen capture from his video.
@JonS
@JonS Жыл бұрын
Also, an eddy current sensor cannot be used for testing extrusion pressure as stated in the video. It would measure proximity to a conductor. The pressure would be measured by the loadcell.
@ModBotArmy
@ModBotArmy Жыл бұрын
@@JonS it was not totally clear to me how it was being used for that and I was told “The Eddy Current Sensor can sense the tiny flexing of the hotend to calculate the pressure of filament inside”. It is entirely possible my contact misunderstood and meant load cell.
@liamventer
@liamventer Жыл бұрын
Further investigation suggests they were planning to use an eddy senor there below the fan duct as a beacon style Z sensor, that senses bed proximity, but instead they opted to use an eddy current sensor above the heat sink to detect movement of the heat sink for Z probing as well as for active flow control. I am guessing it senses movement of the magnet installed in the heat sink. Very clever design.
@robcaseyire
@robcaseyire Жыл бұрын
Great review! How big & how thick is that hue forge print & how long did it take to print? Some mid-sized hue forge prints, 2mm thick are taking 12 hours on my mk3s+, & have manual colour swaps too (also I have the same sexy Wera allen key set as you!)
@pvpgod9977
@pvpgod9977 Жыл бұрын
Im curious if the A1 minis AMS support lives up to the hype, considering the price point.
@philiprogers5772
@philiprogers5772 Жыл бұрын
Is it ok to use PLA on a PETG textured plate?
@OmegaGamingNetwork
@OmegaGamingNetwork Жыл бұрын
I hope the reason Bambu put a nicer screen on this means they have heard us and a screen upgrade for the P1P/P1S is in the works. I know I can do that third party upgrade of my P1s, but I just don't like how janky it looks given part of the reason I bought the printer was the fact that it looks far more refined and professional than most other printers.
@dangerous8333
@dangerous8333 Жыл бұрын
People that put so much focus on the screens make me lmao. It’s generational, I think.
@joshjones1675
@joshjones1675 Жыл бұрын
Have you heard if they are going to bring any of the new tech like noise cancelling and the quick swapping nozzles to the P/X series?
@supercurioTube
@supercurioTube Жыл бұрын
In the interview on CNC Kitchen, Bambu's CEO said they will bring the motor noise cancellation on the X1/P1 series too, and that they can because they designed their own driver solution instead of relying on the industry standard supplier (seems to be TI)
@jajordan2515251
@jajordan2515251 Жыл бұрын
Modbot. love your content and thank you. Friendly tip: @ 8:56 in this video you fully display the QR code that allows anyone to bind your printer to there account. You really should cut or blur that from your video. At a minimum, if your A1 is connected to the cloud/internet this would allow anyone to control your printer, view the camera etc.
@jajordan2515251
@jajordan2515251 Жыл бұрын
maybe you can only bind a particular printer once.. I didn't try it, but my bambu handy app was able to read the code in your video and prompted me to add your printer to my account. I stopped there and wanted to let you know ASAP.
@Andre_M_3D
@Andre_M_3D Жыл бұрын
I will say it is likely not for me, but it seems like a good value for those looking for this type of printer
@jay1st1st
@jay1st1st Жыл бұрын
There is no eddy current sensor inside the disc shaped part, it's empty.
@sadoggo6718
@sadoggo6718 Жыл бұрын
For a budget-friendly option, the AMS isnt half bad. Its like the off-brand sneakers of 3D printers - functional and wont break the bank
@Shqip8k
@Shqip8k Жыл бұрын
The A1 minis compact size might be a drawback for some, but it could also fit snugly in my workspace.
@DJ-Hollandica
@DJ-Hollandica Жыл бұрын
n1 lets have fun lol unexpected bedslinger but in office or study room not bad color system under 500 with cam
@alecchi
@alecchi Жыл бұрын
do you think they will have foreseen the possibility of being able to mount it on the P1P too?
@ModBotArmy
@ModBotArmy Жыл бұрын
The AMS Lite? It is possible. The way you need to access things though sitting on top of the printer may make the most sense. I am curious to see if they add support.
@gurpreethanzraa
@gurpreethanzraa Жыл бұрын
Im cautious about the A1 minis noise levels, but Id love to hear more about its print quality.
@joelamaro4525
@joelamaro4525 9 ай бұрын
The only other printer I’ve experience with is the Ender 3 V3 SE. This is infinitely more quiet. At least 3-4x.
@charlesrestivo870
@charlesrestivo870 Жыл бұрын
Ya a normal not over techy video For us normal folks
@CB_agotchi
@CB_agotchi Жыл бұрын
Can you attach a regular AMS to the A1 mini?
@jon9947
@jon9947 Жыл бұрын
No
@cozmo4694
@cozmo4694 Жыл бұрын
The hotend is propably heated by passing current through the metal, with a temp sensor in the mount. This would be optimal, since the whole block is heating up, not just a single element so no issues with thermal conductivity
@queeno9218
@queeno9218 Жыл бұрын
It doesn’t seal the box and cannot print ABS. I tried the function of the overall consumables, but it didn’t work. It’s noisy.
@joelamaro4525
@joelamaro4525 9 ай бұрын
Noisy compared to what? The only experience I have is an Ender 3. This is infinitely more quiet.
@romankonecny9943
@romankonecny9943 Жыл бұрын
From technical point of view it is marvelous device and it is cheap as hell. Only issue I have is the AMS. It just does not make sense to me in this price market. It costs 450 USD, which is only 500 more to get P1S + AMS. Multi material print is expensive, I mean like 4x more expensive as for material consumption, and the difference to P1S is just 20 kilos of PLA. I mean, If you can't afford P1S you probably cannot afford AMS multi color printing either. You don't need to print multicolor, you can just use AMS for for convenience of material swapping and I believe many people with X1C AMS combo do so (I do), but if you don't have money to print often, infrequent changing of filament will not bother you as much. TLDR: A1 mini without AMS is unbeatable machine for beginners and/or occasional makers. If you have the need to print often, P1S with AMS would be my recommendation. But my recommendation means nothing :-) and I fully understand and support buying stuff just because you want it, and I do want it.
@carlosjoe5154
@carlosjoe5154 Жыл бұрын
Ok bambu lab, now you've got me hooked. Almost. The build volume is just too small aswell, not suitable for my usecase sadly...
@xnitropunkx
@xnitropunkx Жыл бұрын
Still blows my mind how much of a fuss people make about the p1p screen. Its faster then the X1 it does not lag and I have no issues using it. Perfectly suitable option for it
@dangerous8333
@dangerous8333 Жыл бұрын
My X1 screen doesn’t lag.
@simplegamerz9485
@simplegamerz9485 Жыл бұрын
I really don’t understand why they made a new ams when they had one that worked well and just needed some minor changes
@joelamaro4525
@joelamaro4525 9 ай бұрын
Because this one is less expensive?
@gamingwithsami3965
@gamingwithsami3965 Жыл бұрын
Im all about the DIY scene. Anyone here tried modding the A1 mini for better performance?
@NorwayVFX
@NorwayVFX Жыл бұрын
If you want DIY don't get a Bambu. They are great machines when you just need a workhorse that prints day in and day out but don't expect to be modding anything on them.
@probirsingh7010
@probirsingh7010 Жыл бұрын
I have to point out thst Bambu Labs after-sales customer service response is too slow
@BulletShogun
@BulletShogun Жыл бұрын
can it print asa?
@dangerous8333
@dangerous8333 Жыл бұрын
Can any bed slinger?
@Schuffed
@Schuffed Жыл бұрын
Prusa is never coming back from this one
@nghiavlog188
@nghiavlog188 Жыл бұрын
As a long-time Prusa user, I decided to give Bambu Labs A1mini a try. While they offer good value for the price, they lack the build quality, customer support, and community that Prusa offers.
@Nikelaj94
@Nikelaj94 Жыл бұрын
Let me guess u have never seen one? Ive had the prusa mini and i have a1 mini. The a1 mini is waaaaay better build quality and Bambulabs community is pretty much as big as prusa, if not bigger theese days? Yea Prusa has better support, bambulabs is decent though. But for prusa you also pay 2/3 of the price for that support.
@joelamaro4525
@joelamaro4525 9 ай бұрын
@@Nikelaj94yours is the overwhelming opinion. The A1 mini takes a meaty 💩 on the Prusa mini.
@pangrac1
@pangrac1 Жыл бұрын
Průša killer. 😜
@3dPrintingMillennial
@3dPrintingMillennial Жыл бұрын
This is pretty insane! 🤯 Definitely never expected a bed slinger from Bambu. However I'm glad they did it. I feel like this project must've been government funded in secrecy for some long game we're not aware of yet.
@dark_xdark132
@dark_xdark132 Жыл бұрын
3D打印机是非常低级的技术,我认为我们的政府对此不屑一顾。
@aware2action
@aware2action Жыл бұрын
Nice printer. Quality components. Engineered well within constraints. Except for the excess use of material and wasted material (which I feel is the 💸🐄 for BLb), it is a robust maintenance free system. Glad to see upclose details of the heater block. Seems like the heat chamber built into toolhead, with heat transferred through conduction alone. That explains large flat surface area of hotend. The electrical spring contact behind the melt chamber is probably used, to ensure heater is not energized, witout hotend present!. Eventhough the design is innovative, it will inturn, impose limits on max hotend temps. Will be interesting to see toolhead disassembly, and the eddy current sensing. Excellent review👌❤👍👍
@unfilteredgamer9095
@unfilteredgamer9095 Жыл бұрын
The A1 minis AMS support for multi-color printing sounds cool, but Im a bit wary of its limitations.
@franchezvibritannia7320
@franchezvibritannia7320 Жыл бұрын
They should’ve made a Voron 0
@TheWright1
@TheWright1 Жыл бұрын
I wish this would have come out last year. Would have bought this instead of my Creality S1 pro. This is such a better printer
@andreamitchell4758
@andreamitchell4758 Жыл бұрын
Smaller build volume though, too bad they didn't at least go with an ender 3 build volume
@rumingjiang9645
@rumingjiang9645 Жыл бұрын
The AMS looks like a DJI mini 3 lol
@TheExtremeElementz
@TheExtremeElementz Жыл бұрын
This is the printer for everyone who is curious about getting into 3D printing. They just made everyone else extinct in my eyes zero reason to recommend anything else. I love it!
@AriSetiawan-zs9xu
@AriSetiawan-zs9xu Жыл бұрын
Remember that its actually mentioned that this is not compatible with full size AMS!
@aaronvlogs
@aaronvlogs Жыл бұрын
Noise levels are a deal-breaker for me; can anyone share their tips for quieter printing with the A1 mini?
@proaudiorestore8926
@proaudiorestore8926 Жыл бұрын
Sure, print slower. Fan noise is inevitable at higher speeds, there’s no real way around it
@logitech4873
@logitech4873 Жыл бұрын
​@@proaudiorestore8926This is a spam bot btw. All videos about this printer have tons of spam comments that appeared at around the same time. This comment is from before anyone other than reviewers had the printer.
@Niclord7
@Niclord7 Жыл бұрын
Funny how everyone assembles the scraper the wrong way. Good review however!
@kimmotoivanen
@kimmotoivanen Жыл бұрын
Then it's simply bad design 🙄
@_harjot__1765
@_harjot__1765 Жыл бұрын
While its nice, its not what I expected from a newly released machine from Bambu Lab
@bio.s2903
@bio.s2903 Жыл бұрын
Assemble the bambu lab scraper: kzbin.info/www/bejne/o4a2oHaoZt5sgM0
@TigerWvel
@TigerWvel Жыл бұрын
Tried my hand at 3D printing with the A1mini, and its like the DIY craft kit of 3D printers. Fun for tinkering but not for serious projects.
@proaudiorestore8926
@proaudiorestore8926 Жыл бұрын
Lol, the prusa bots are in full effect in this comments section. Feeling threatened?
@haze3382
@haze3382 Жыл бұрын
Start off with how open the printer is. 20 minutes and I saw nothing about the firmware. Glad I searched the transcript rather than watch this.
@ModBotArmy
@ModBotArmy Жыл бұрын
If you are looking for open firmware this is not the printer for you buddy 👍
@evaaja2609
@evaaja2609 Жыл бұрын
Sounds like theyre promoting a cheap iPhone
@joelamaro4525
@joelamaro4525 9 ай бұрын
This mini is amaaaaazing. Nothing cheap about it at all. I wish I would have bought this before my Ender. This takes a meaty 💩 on it.
@notchipotle
@notchipotle Жыл бұрын
ah a $299 pooping printer
@bananasba
@bananasba Жыл бұрын
Sounds like a budget iphone, ahahaha
@DaveTimperley
@DaveTimperley Жыл бұрын
What weirds me out, about this excellent looking printer, is that there are four bowden tubes connected to the print head. Bambu were 'this close' to having four independent nozzles, and a lot less wasted plastic. Also, for something aimed at the home and schools, mothers and teachers are going to hate all those little scrapes of extruded plastic messing up the place.
@joelamaro4525
@joelamaro4525 9 ай бұрын
Yeah, just print a 💩 bucket that connects to the cutter. Not a problem.
@DaveTimperley
@DaveTimperley 9 ай бұрын
@@joelamaro4525 Wasn't really the argument I was making was it??? It's about the issue of waste, not how you handle the waste
@joelamaro4525
@joelamaro4525 9 ай бұрын
@@DaveTimperley handle the waste as in having less waste. 🤦🏻‍♂️ lmfao!
@crazybabluyt9785
@crazybabluyt9785 Жыл бұрын
I was excited about the A1minis features, but it fell short of my expectations. Its not suitable for those who need larger prints or want to work with ABS. The overall consumables feature was a letdown, and its noisier than expected
@c0mputer
@c0mputer Жыл бұрын
Since this is really designed for new people who are just getting into 3d printing, it would be great to make a video with someone with zero knowledge and get their impressions. Like one of your parents perhaps or a young person.
@c0mputer
@c0mputer Жыл бұрын
Actually the more I think about it I think this would be a very informative video. If you can re-box the printer and AMS and reset the OS so it can be done from scratch again.
@jackshett
@jackshett Жыл бұрын
Nah... just put the printer on the edge of the table. Use a trash can to catch the poop.
@PLr1c3r
@PLr1c3r Жыл бұрын
The fact they call it the A1 "mini" leads me to believe they have a larger scale A1 in the pipeline.
@dangerous8333
@dangerous8333 Жыл бұрын
Does Prusa have a larger Prusa mini? 🤔
@jackcampbell4465
@jackcampbell4465 Жыл бұрын
Bamboo has missed the mark on this one. Why would anyone want to print faster than 50 mm/sec in an entry level printer? 🤔
@joelamaro4525
@joelamaro4525 9 ай бұрын
Why wouldn’t we? I do regularly.
@some______guy
@some______guy Жыл бұрын
Nice non-elitist review.
Bambu A1 vs P1P - Are These The Same 3D Printer?
11:38
Loyal Moses
Рет қаралды 126 М.
Reducing waste from Bambu Lab AMS (lite) prints
11:49
Teaching Tech
Рет қаралды 430 М.
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН
Why aren't more people 3D Printing this Indestructable Filament?
28:03
The unseen world of 3d printing at 1000fps!
20:22
Lost In Tech
Рет қаралды 117 М.
Bambu Lab A1 Mini + AMS Lite 3D Printer Review
18:44
Maker's Muse
Рет қаралды 359 М.
You've Never Seen A Toolhead Like This! (Takeoff)
13:56
ModBot
Рет қаралды 53 М.
Can you print (with) your spools?
18:04
Made with Layers (Thomas Sanladerer)
Рет қаралды 259 М.
Bambu Lab A1 Vs A1 Mini - Which 3D Printer Is Right For You?
15:58
Ricky Impey
Рет қаралды 142 М.
I tried Injection Molding using a 3D Printer!
18:27
CNC Kitchen
Рет қаралды 803 М.
I Tested PPA-CF Filament and It's INSANELY Strong!
18:39
Clough42
Рет қаралды 216 М.
I went to my old job and took apart their new 3D printer
1:06:33
Stuff Made Here 2
Рет қаралды 843 М.