This clear coat was flown in from GERMANY!! might need reducer for this stuff WOW

[@Juliopaints]

This is not a good clear. It's a lacquer based paint. Does not have the UV protection that pure urethane clear coats have. That's why it's sold in the UK. not as much UV protection needed there as in the states. So paying over $100 to ship plus the cost of the clear would be counterproductive and a waste of money to someone painting in the US

[@clist9406]

Never seen the tape trick to level out a run . 20 years in the industry and still learning new tricks .

[@thetriggerman954]

@@clist9406 I've been using that trick about 20 years now lol takes patience to add more clear multiple times and waiting for it to level out.

[@Mr.Bell229]

​@thetriggerman954 Yes sir! Learn that trick in the late 90's. Patience is the key. Used that tape trick to remove bugs. They love to tap dance in clear for some reason. 😂😂

[@ChrisHall-hy6lv]

TriggerMan you can spray any clear and make it look good. Top notch painter you are

[@thetriggerman954]

@ChrisHall-hy6lv thank you Chris for the kind words. 💪🏼🤙🏼

[@Thedjcodeman]

​@thetriggerman954 you make it look easy bro. Whenever I use that trick it's tough to not remove too much

[@danielgonzales9752]

One of the best KZbinr’s out there, never a boring episode 🔥

[@thetriggerman954]

@@danielgonzales9752 thank you Daniel 🫡💪🏼

[@evojigger]

Its a good clear, they make a special reducer for liquid glass that has an accelerator in it, helps it go off faster.

[@thetriggerman954]

Ohhh 😯 I wasn't aware. Thanks man

[@andrewwhiting5526]

Thats a great trick for getting rid of a run, thanks for sharing this trick. Really enjoy your videos and have learnt a lot from watching

[@thetriggerman954]

You're more than welcome Andrew 💪🏼

[@bradsrestorations1085]

Trigger, you're fearless! Always trying new stuff. Always learning!

[@thetriggerman954]

Man I've worked in some conditions that I had no choice but to perform flawlessly, working in big dealerships with 5 other painters looking for my flaws, shop foreman, writes, insurance programs checking your finished product with special lights looking for even an eyelash in the paint to make you redo the job. Man I've worked under those conditions and still came out on top. So at this point in my life and especially at this shop I'm working at, I'm on " cruise control" smooth sailing until the end. 💪🏼 Thank you Brad for your continued support. It's appreciated

[@anonimous2451]

MANNN, I just had a run and coulda helped that tape trick. ....... now it is in the arsenal. For some reason these tiny bugs sit on my clear and that too will be more easily remedied. Love these tricks and tips. Thanks. Looked that product up and I typically do not use Lacquer based clears as the have limited UV Protection typically.

[@thetriggerman954]

Yes sir, keep it in the goodie bag for the next run 😉

[@contant777]

Spies Hecker 8600 clear is a wet on wet clear coat. Lays down like glass! It Rocks!😎

[@thetriggerman954]

@@contant777 yeah I think that is like 1/2 coat then back with full coat. I used it back in the day forgot. But I know it was back to back

[@contant777]

@ 1 1/2 coat exactly.

[@Xeil]

That tape trick is FIRE! I will keep that in my back pocket with interior trim work where the paint has tons of enamel and is prone to run and sag if you go too hard. I totally agree on using what you know, I hate switching brands and paints. Especially when i've got an idea of hang time and the time to getting another mil on it without runs. Always good content, underrated channel and tons of great info.

[@thetriggerman954]

Thank you sir. Works great on enamel. I've done plenty. I appreciate it brother 💪🏼🤙🏼

[@abumusaryan4697]

What a spin out. I seen this in action for the 1st time 2 days ago so i am very happy to see this here on your channel. It definately works. We did it on a solid white and does need to become slightly tacky 1st but amazing this worked really well. Awesome tip

[@thetriggerman954]

Yes sir it works, I've gotten lucky on black and didn't even need to wet sand it. Takes a lot of patience though.

[@marclalonde4589]

Always nice trigger,..! , why you finish the small top part with a can …??🤔

[@thetriggerman954]

@@marclalonde4589 clear coat blender. Melts the clear into existing paint.

[@runningman00900]

Thanks Trigger, I'll probably get a few runs when I paint mine, nice to see the tricks to fixing them.

[@thetriggerman954]

@@runningman00900 you got it my man 💪🏼 hopefully you don't get any runs 🤞🏼

[@acronutz]

Relative to the the "fast" or "slow" hardener question. If you go to about 2:09 into the video you can see on the clear coat can (larger can) that there is a red square marked next to "standard". My conclusion is that means the clear is standard hardener vs the available "fast". I figured this out by looking at the product data on the Spray Guns Direct website. Looks like the hardener is all the same, the "standard" or "fast" is part of the clear coat formulation.

[@thetriggerman954]

@@acronutz yep that's what everyone in the comments is saying. So that seems to be the case. Thank you 🙏🏼

[@kbrasshc]

Glad you did a review on this clear, been wanting to try it for a while now. I got the green light now. And your right about using the right gun for different clears.

[@thetriggerman954]

Yeah it's a pretty good clear. Damn good for the price

[@douglasthompso]

I do not add any thinner to this clear. Came from the UK. Also I do not spray this product with zero flash time. I spray all the panels then start over. This also depends on temp. Like the tape trick very nice.

[@thetriggerman954]

@@douglasthompso oh yeah you had this clear mixed up with another clear coat. I remember you told me after 😅

[@douglasthompso]

@@thetriggerman954 True, but this is the one that we have been using in the last few months on the custom jobs, along with Grant 7. The Quartz Liquid Glass have two drying types, the first is the Standard, that you have and the other is Fast. which I have not used. The clear has some kind of property the determines the drying time, not the activator. Yeah, I don't know how that works???? There is only one activator for this clear. Anyway have fun with it.

[@thetriggerman954]

@douglasthompso thanks again Doug. Hope you're doing well over there. ❤️

[@Thedjcodeman]

that clear sprayed out super nice

[@thetriggerman954]

Sure did. Thick shit there man 😮 thank you 💪🏼

[@joosten1977-wz2zj]

i worked with this Quartz before. i tought it was made in Poland. there was polich tekst on the can. if you let the run dry a bit more before attacking it with the tape, you get better results. but still looking sharp!!!!!!!!!!!!!!!

[@thetriggerman954]

I let that dry for about 20 minutes, didn't have all day. I've been doing the tape trick for at least 20 years I got it down. New clear so wasn't sure what was what with that stuff lol thanks for watching 💪🏼

[@joosten1977-wz2zj]

@@thetriggerman954 EL CHEAPO!!!😂😂😂

[@greddmyles3677]

1use the clear from Speedokote that dieshave a flash time, it's panel clear. 2:1 and the have one 3:1. Actually they have a few that's panel clears. They're actually good too. You can do yo full panel and go right back in until you're satisfied. It dries fast

[@thetriggerman954]

@@greddmyles3677 all I've seen from Speedokote is acrylic clear and I'd never use that stuff. No longevity

[@abruptlyblunt]

that tape trick is an old school paint run trick, i learned it over 30 years ago from an old boy who had been painting his whole life, you just have to get clear back on it right away so it will blend but that's clear with reducer, reducer is a solvent that helps it blend not sure about clear without reducer. to bad we didn't get to see the next day results....

[@thetriggerman954]

@@abruptlyblunt yea the guy I learned it from was 50 and that was like 25 years ago. So I'm sure he's not around anymore. I soaked up as much as I could from them old timers. I have lots of tips I'll start doing as the channel grows. Have to wait until my channel is larger because the big boys watch and replicate the same thing as if they were really around 30 years ago and learn those tricks. Culture vultures 😅

[@srodgie]

Hey Trigger, how are you doing, Brother? Great video, Sir. Loving the masking tape trick! 👌👍 Have a blessed day. Steve 😎

[@thetriggerman954]

@@srodgie whaaaat up Steve, all I'm good over there thanks man. Glad you enjoyed 💪🏼

[@jonnyfowder]

Liquid Glass is a great clear coat used it for last 5 or 6 years put on tack and wack / back to back

[@thetriggerman954]

@@jonnyfowder good to know it holds up

[@carbongoat]

Why do you not lift after each pass? Your getting way more material at the end of each pass

[@thetriggerman954]

@@carbongoat man I have no idea what I'm doing. I've been trying to learn from KZbin videos. Do you have a few videos I can watch? Any suggestions?

[@MartinMora92]

😂​@@thetriggerman954

[@thetriggerman954]

@@MartinMora92 🤦🏼‍♂️😂

[@JohnWD40TC02]

Hellooo Mr Trigger Man hope you are keeping well over the pond👌Spray Guns Direct is a very good company and are very helpful as I have used them quite a lot here, they also do the Quartz Crystal Clear which I think is an HS but it's easier to use than the Liquid Glass I have used it and it's a great clear but as you say it does like to keep flowing I think it works best with a heated booth as it likes the warmth👍 There is only one hardener the different speeds are part of the actual clearcoat so it should say on the clear tin what the speed is, if you need it I have the TDS here for it Trig it used to be called VOC Speedgloss 2:1 but they changed the name, I always use this as a 2 visit clear with a flash off, using it as a single visit clear is IMO almost impossible without getting runs🤦‍♂ok I'm now rambling so I better clear off😁 I'll send you the TDS over if you need it Brudder! 🙏👍John UK

[@thetriggerman954]

Ohhh now I see the different clear is what makes The difference. No wonder when I googled the activator it did not come up showing fast or slow Now that makes sense. Thank you John What time I get a unfamiliar product I'm just going to check with you first I know You have a broad spectrum of knowledge 🤓

[@JohnWD40TC02]

Pleased I could help Trigger, I'm no expert painter but I have used a lot of different clears which is part of what I do on my channel👌👍

[@Mr.Bell229]

I remember spraying Akzonobel U Tech Clear early 2000's. It spray exactly like this clear. Went on kind of thick. It would flow out very well. If you hammered it trying to glass it out it would hit the floor. 😅

[@thetriggerman954]

Exactly 💯 that's this stuff. Tricky and slippery when wet 💦💦💦

[@AaronWilliams-b8s]

This video showed up on my feed, I’m glad that it did, I try to learn something everyday and I want to learn how to paint cars tricks of the trade are always nice to know. That’s what’s up TriggerMan!!!

[@thetriggerman954]

@@AaronWilliams-b8s I'm glad it showed up on your feed. Make sure you subscribe so you don't miss anything 🫡

[@AaronWilliams-b8s]

@ MosDef I Subscribed Before Commenting LoL!!!

[@thetriggerman954]

@AaronWilliams-b8s my man 💪🏼

[@ptours99]

i went on their site and basically it said don’t spray straight out with out reducing because it’s not made for normal clearcoat spray caps it’s too thick you must reduce maybe in your testing down the road try it out see if it’s good

[@thetriggerman954]

Looks like I broke the rules 🤦🏼‍♂️ I'll try it with a little reducer next time and see what happens. Thank you

[@dixiethedog1777]

I love the Quartz clear and I use it regularly. Check out Tony's Refinishing Review-Quartz Liquid Glass 2K Ultra High Solid-clearcoat YT video. This is where I first found out about the Quartz Clear so then decided to give it a try. When I use it I still allow a flash-off time between coats in the way I would spray any other clear paint. Keep up the good work, your channel is great!

[@thetriggerman954]

I will check it out thank you Dixie 🐶 💪🏼

[@chrisdamonsworld]

The price is not bad. This reminds me of the Eastwood euro clear. It's thick as well.

[@thetriggerman954]

@@chrisdamonsworld price isn't bad at all.

[@ganeshnarayan5505]

El Cheapo came out very nice good job Trigger. YOU DIG

[@thetriggerman954]

Thanks my man 😉🤜🏼🤛🏼

[@CaptDiwral]

I liked that tape trick. I never thought of tape. I used absorbal pad pieces to dab it off but that tape imma try next time.👍

[@thetriggerman954]

@@CaptDiwral glad you liked it. I'm sure it'll come in handy some day 🫡

[@J.Lulo_]

Nice 👍 job trigger looks great.

[@thetriggerman954]

@@J.Lulo_ thank you Mr LuLo 🫡 look forward to your next video too my man. 💪🏼

[@BearBudgetgarage]

Showing us those "Trigger tricks" Always something to learn

[@thetriggerman954]

You got that right Big Bear as the channel grows I have to start releasing some of those old school Painter tricks. I couldn't release them too quick because the big guys started taking them and using them on their channel as if they were around 30 years ago when these painters were actually doing this stuff. Although some of the tricks I have even if I do it right on camera today's internet clowns will say it doesn't work 😅 So buckle up Big Bear next year We turn it up a notch 💪🏼🥳

[@TheHumblePaintSprayer333]

That clear looks nice, i prefer HS & UHS clears, don't have to load it on to get a good build, the spead is better and nicer gloss than MS clears, that just my opinion tho, but like you say some can flow a lot after and catch you out, good advice man and great tip the tape on the run 👍 Give it a go with the x5500 man, well i would say that wouldn't i 😂, go for 1.2 and bump the pressure slightly, maybe try a splash of reducer less than half of what is says and put 1 skinny fast coat on and 1 full thats all it will need Great job mate 👍

[@thetriggerman954]

Ok I'm going to take your advice. Next round will be with the 1.2 x5500 and a splash of reducer. Wish me luck 🤞🏼🍀 😂 have a blessed one

[@TheHumblePaintSprayer333]

@@thetriggerman954 Good luck im in the shit if it goes wrong 🤦‍♂

[@thetriggerman954]

@TheHumblePaintSprayer333 😅😅😅😅😅😅

[@Floridaman_Dave]

Hey Triggerman love the content brother. It takes a master to problem solve and keep it moving because we all know mistakes and things just happen. You are teaching golden advice sir 🫡

[@ivayloivanov3010]

amen

[@thetriggerman954]

Thank you Dave. My instructor always told me spraying a flawless paint job doesn't make you a great painter. Getting into trouble and being able to get out of it and finishing the job is what makes a great painter. 🫡

[@billbeckett1021]

You know I love a good 2:1 clear. The 717 Porphis split tip is made to spray these clears!

[@thetriggerman954]

@@billbeckett1021 oh you think the 717 can break this up? With no reducer? 🤔

[@billbeckett1021]

@ I spray Transtar 7600 and Lumabase 8000 and have good luck with them.

[@thetriggerman954]

@billbeckett1021 TranStar always comes in swinging

[@winnsautomotiverefinishing]

Hey brother been a while, they are located in the UK and I seen the gunman use this on his torana and with this clear, it is the clear that is the speed not the activators on this brand im sure, idk why that is though, I will be keeping that tape trick in my memory bank that's for sure thatmnks for that one brother

[@thetriggerman954]

@@winnsautomotiverefinishing you got it man. That's actually the only channel I saw the clear on. But it's hard for me to understand the guy so unfortunately I don't watch much of his content. But yeah that was the only place I saw any info on the clear. Thank you for the info 🤙🏼

[@Rbultmann]

Hey Trigger I saw a video short titled first day in new shop in Puerto Rico. Is that for real? I live in Puerto Rico and have learned a lot from your videos. I mostly paint guitars but have painted an occasional bumper cover. Thanks for all the info and keep up the good work!

[@thetriggerman954]

Lol nah man just messing around. I have a bunch of those type of videos, first day in Jamaica, Dominican Republic, I always pick a different country and just have some fun. 🥳

[@jasonevans6720]

It's good stuff Trigg but an odd one you buy the clear in different speeds ie fast, medium and slow and there is only one hardener

[@thetriggerman954]

Say what? Man I thought I read that but figured I read it wrong 😮 well I'll be damn 🤦🏼‍♂️

[@Pavelek88]

If you ever have chance grab a Novol clearcoat from "Spectral" or "Classic Cars" line. Serious stuff from Poland

[@thetriggerman954]

I'll keep an eye out for it. Thank you for the tip

[@Mikefngarage]

I only go 5% when the clear specifies up to 10% Reducer.....All other clears NO REDUCER....It will fall apart WAY before it is suppose to if you cut the Clear.

[@thetriggerman954]

Yeah I always look at it like how much do you want your clear to die back at 5%. You only lose 5% of gloss use 10%, you will lose 10% of gloss. Although there are some clears that there is no getting around it you have to reduce it. I just don't like the fact that people are being taught to automatically add it to every job just to get a " slick finish " That's the part I strongly disagree with.

[@sveinhaland2975]

Good one with the tape, never done that before! Only with insects that came and sat down in the wet paint... :)

[@thetriggerman954]

I use it with bugs and runs only difference is with bugs I just curl the tape up and tap the bug and remove the bug I don't lay to take down flat over it

[@deanbrown7643]

Tape trick works a treat , old skool trigg 😊😊 That German tech nearly threw the t man off balance but my man saved the day , gone and out the door keep the faith bruh 👊👊

[@thetriggerman954]

That's that real German technology huh Mr Brown. I was getting used to that China-UK technology for a while, but this stuff brought me back to reality 😉😎💪🏼

[@deanbrown7643]

@@thetriggerman954 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣 have a blessed weekend bro 😄👍

[@thetriggerman954]

@deanbrown7643 thank you you do the same brother 🤙🏼

[@MR3JOBS]

What are the best UV protection paint and clear coat brands that you know work in FL Sun. That tape trick was WOW! Awesome content!!

[@thetriggerman954]

You'll get your UV protection with the clear coat. And pretty much any high solids clear would give enough UV protection. Maybe just ask for info on the clear. There's so much stuff out there now I can't even keep up anymore

[@BLACKRAIN390]

YOU AWESOME FAM.... GREAT INFORMATION HOW MUCH IS THE CLEAR ..

[@thetriggerman954]

Like $150 for a 5 liter kit. Not to bad

[@hidesertdave6166]

Good job Trigger Man, especially nice technique on the run

[@thetriggerman954]

Thank you man glad you enjoyed 😎

[@sscorpionbblade]

Trigger Man back in the lab doin his thing! Another great video, I just may buy some for my father! Question, what other clear would you compare this one to?

[@thetriggerman954]

@@sscorpionbblade I haven't sprayed it enough to really give you an accurate equivalent. I didn't even get to see the clear once it was dry. When I came in the next morning car was gone, El cheapo took the car a few hours after I painted it. So I'll need to spray it a few more times to give a fair assessment. So far I'm liking it I'm just glad I didn't get more runs 🤦🏼‍♂️🙄😅

[@sscorpionbblade]

@@thetriggerman954 that's right I forgot you did it for El Cheapo 😂😂😂😂😂😂 Maaaan, it would've been a treat to see as it sprayed so well. Well until the next episode, see you then and enjoy your weekend.

[@thetriggerman954]

@@hidesertdave6166 thank you Dave glad you enjoyed

[@lukeowens3544]

You fineline the gaps of the jambs for sealer too?🤘 I found out about that trick a while back Works bad ass!!

[@thetriggerman954]

Yes sir, sometimes I'll have my prepper do it. Sometimes I forget to to pull it off after sealer 😜🤦🏼‍♂️

[@joejones711]

That damn trigger man at it again. SPRAY ON BRUDDER SPAY ON

[@thetriggerman954]

😎 spray on brudder 🤙🏼💪🏼

[@FruktsTv]

i imagine your tape trick works only if you get run on the first coat ?

[@thetriggerman954]

You can use it on any coat. But I normally only use it on the first coat. Most times if you get a run in the second or third coat you can get the run out without a trace but run in the first coat is looking for trouble. But it works at any stage.

[@nickcrill7718]

The awl grip 3000 clear is thick. almost 50% solids. 2/1/1

[@thetriggerman954]

@@nickcrill7718 that's a different ball game there lol

[@2koolforyou88]

I've done the tape trick it works I've heard that clear gets hard like literally

[@thetriggerman954]

I didn't even get a chance to see it dried. Dam El Cheapo came and took it

[@2koolforyou88]

@thetriggerman954 lol

[@josecontreras9402]

Thank you for the clear run trick

[@thetriggerman954]

More than welcome 🫡

[@Chili_G_77]

THAT TAPE TRICK...👍👍👍

[@thetriggerman954]

😎🤙🏼👉🏼 4shooooow

[@phillyairsoft6372]

Good tip to put away for later, give some confidence to go heavier with clear 😂

[@thetriggerman954]

With that attitude you're going to need a shovel not tape lol to get that clear off the ground 😅😅😅

[@nickcrill7718]

Has been awhile for el cheapo. I’ve taped out a run with success and failure lol

[@thetriggerman954]

@@nickcrill7718 I've had many failures my man. 🥹

[@mickonewell8628]

Spray gun direct is from the UK

[@thetriggerman954]

Loooooong way 😯

[@BrandonLamb-xl6hn]

I have used it sum close to deltron 2021

[@thetriggerman954]

@@BrandonLamb-xl6hn that's some of the best clear I've ever used there.

[@hillbillycustom1730]

I wish it wasn’t a lot to ship I would use it all the time

[@thetriggerman954]

Yea shipping was like $100 probably because of the weight. My boss likes it he asked about ordering more but direct want to pay all the shipping.

[@wrightsrrt871]

Was the activator fast, medium or slow he sent out it may just need an faster activator?

[@thetriggerman954]

I don't know, I said that in the beginning I was like I don't know if this is fast or slow, it didn't say it on the can, and when I googled it nothing comes up as far as the speed. So I was really just freestyling it which I hate to do. Didn't have a clue. So it could have been much worse for me 🥹

[@wrightsrrt871]

@thetriggerman954 well you did great for using clear you never have! I also was wondering if spraying from the bottom up on the clears that take longer to set up and flash off dose it help and could you use another companies activator with it to get different results? I've been using finish1 and matrix so im always looking for better clears for higher end classic cars.

[@thetriggerman954]

@@wrightsrrt871 I like the matrix, I heard a few guys complain about the finish 1 I've never tried it though.

[@wrightsrrt871]

@thetriggerman954 i used the finish 1 on most of my daily driver jobs it takes an little longer to dry then some people like but I usually let my evac fans run for awhile with it sit about 2 hours then I heat my shop up with an space heater to speed up the dry time. Matrix I've used on some Elcamino job and an daily driver and liked it as well

[@tubbed68cuda]

Hey Trigger. Where did you get the adaptor for the Porphis MPH-338? I need one.

[@thetriggerman954]

One of my subscribers made it for me. I don't think they make one for it. My subscribers are the best I swear 😎🤙🏼🤙🏼🤙🏼

[@thetriggerman954]

Hit me on IG and I'll give you his Email address and he could make one for you.

[@StyleHouseRhythm]

The tape trick comes out for me when I run primer or clear in the fall/winter transition 😂

[@thetriggerman954]

@@StyleHouseRhythm you run your primer? Go to time-out 👉🏼

[@StyleHouseRhythm]

@ it happens once or twice a winter. Just keepin it a buck 😂

[@thetriggerman954]

@@StyleHouseRhythm lmao my man. Keeping it real. Yeah man shit happens to the best of us

[@hillbillycustom1730]

You gonna like it

[@Gegsite]

7:00 adding reducer ... But we are good Trigger ❤

[@thetriggerman954]

Yea I caught that after I watched the finished video. But I know my subs were smart enough to know what I meant. 😉😎

[@BrandonLamb-xl6hn]

Aye trigger man speedokote smr 42 high solid clear is good clear to have u ever tried it

[@thetriggerman954]

💩💩💩💩

[@BrandonLamb-xl6hn]

@thetriggerman954 lol

[@mrwick2186]

You keep it 100. Your channel shows the ups and Downs of painting. Keep it going

[@Rikats15]

Whats the best way to remove run just on edge? I think I’m gonna get burn through 😢 Also on edge is little build up

[@thetriggerman954]

@@Rikats15 lots of prayer 🤲🏼🙏🏼

[@Rikats15]

@ True 😁. I think I gonna sand down all edge and start over.

[@thetriggerman954]

@@Rikats15 Noooooo 🫠 you at least have to try man. Get one of those McGuire's sanding stones 1,000 grit. Try that first

[@Rikats15]

@ thanks for advice 🤛🏻😎

[@Rikats15]

@@thetriggerman954 Can you seal over only where are burn through areas instead of sealing all panel. And then put base coat? There where is sealer edge wouldn’t be rough?

[@marvondgeneral8736]

I jus give it a 2 mins to pull press the tape in heavy and pull it of fast

[@thetriggerman954]

🫡

[@EmyMachado-k7f]

Excelent , experienc,!!

[@thetriggerman954]

@@EmyMachado-k7f thank you for tuning in Emy 🫡

[@kr2513]

I would rather get a run than those Dirt McGirt jobs. I don’t always get runs but when I do I use the mirka shark blade.

[@thetriggerman954]

I have that same exact blade, comes with the black and yellow pouch, I've only used it like twice, I always use my razor trick as my go to

[@kr2513]

@ razor blades slide on me you’re way more experienced with those🫡. I’m glad you got the shark blade I’ve gotten out some real serious curtains with that. Spray wax the hell out of it mines starting to flash rust after 4 years

[@konstantintop-painting6882]

If its thick then 1,2

[@thetriggerman954]

@@konstantintop-painting6882 sometimes the tip is so small and the paint is so thick to where that doesn't always flow the way you think it would be. But I think I'm going to try it anyway 😜

[@JamesStover-gr3hw]

Love your video

[@thetriggerman954]

Thank you I'm glad you're enjoying them

[@CentralIowaAudits]

yep it`s the best

[@WilfredGreen-ov8bh]

for the price,,cant beat it

[@thetriggerman954]

I think so 😁

[@michaelchaney3101]

Close call

[@thetriggerman954]

Very lol

[@ptours99]

nice trick nice job

[@thetriggerman954]

Thank you 💪🏼

[@northwestoff-roadopportuni7176]

Excellent man!!! Wonder if you can fix Kamala’s after that car accident on Election Day? 😅😅😅

[@thetriggerman954]

You dirty dog you 😅😅 I sent that to like 8 people. 6 of them cursed me out 💀😂😂

[@Mikefngarage]

I have been known to Lay down a FATTY.....lots of times....

[@thetriggerman954]

😯 not the "fatty" big juicy one aye

[@tonymartinez15949]

Spray gun direct it’s a great company from the UK I believe so that’s where I get all my professional guns if you’re paying for a gun to 1500 here in the United States you can pay them about seven to $800 and get the same one and not a clone The real McCoy

[@thetriggerman954]

Sweet that's a hell of a deal. Almost half price😯

[@tonymartinez15949]

Yes, sir it might take a while to get here, but it will get here. Trust me and thanks because of you are spraying that clear that you always spray it is bad ass. That’s my favorite clear now that Amtex clear that clear is very hard to get a run and it keep the gloss

[@thetriggerman954]

@@tonymartinez15949 Good to hear and yes I hardly ever get a run in the Am-Tech clear I wish I could have pulled this one off perfectly but it happens 🥹

[@tonymartinez15949]

@@thetriggerman954 🤷🏼‍♂️🤗

[@rongamble9884]

They have so much better product in the uk and overseas then U.S.

[@thetriggerman954]

Man I swear I was thinking the same thing. 🤔💭 This stuff was sweet

[@rongamble9884]

@@thetriggerman954 I like 2.1 clears but Sherwin Williams doesn't have very many most of there premium clears are 3.1 man I've never know the tape method on the clear I was taught how to use my thumb with a rubber glove by an old timer that's pretty slick idea👍

[@rongamble9884]

@@thetriggerman954 I did some digging on that clear and no wonder it's so awesome it's lacquer based it's available through who you mentioned sprayguns direct and can be delivered here in the US

[@thetriggerman954]

@rongamble9884 I said all of that 😂 it's from spray guns direct ✅ it was delivered to me✅ I didn't know about it being lacquer based 🤔

[@hillbillycustom1730]

Dude Jonny5 said to reduce 😂😂😂😂😂

[@thetriggerman954]

Noooice Johnny 5 no Johnny five. Derf my name is Fred that's what I said DERF #CLASAIC 🤗🤗

[@hillbillycustom1730]

@ rite Said Fred

[@shaunholloway5289]

💪🏽💪🏽💪🏽

[@shaunholloway5289]

Keep wetting them up bro

[@thetriggerman954]

@@shaunholloway5289 in trying man I'm trying 💪🏼🫡

[@juantorres9726]

My dad taught me the tape trick. He learned it back in the 1970s to deal with runs in enamel paint.

[@thetriggerman954]

That's where I got it from old school guys that painted in the '60s and '70s those guys had more tricks than a straight dog has ticks I was lucky enough to work with lots of them that taught me plenty.

[@hillbillycustom1730]

Buy the way good job spraying it I sprayed it 5000 1.3 and heat it up a little instead of reducing sprays like glass in a can trig🫡💪🏼

[@thetriggerman954]

Now that's an idea 🤔 never even thought about that. Might have to give that a try. Maybe the heat gun . Thanks man 🤙🏼