THIS DEVICE MAKES WORKING AT THE TABLE SAW A LOT SAFER | DIY GRIPPER PUSHBLOCK

To make working on the table saw safer, I built a Gripper. I already have a few safety devices like my Push Stick or my Push Blocks for the router table. This Gripper is very easy to build and it works fantastic.
ISBI
----------------------------------------------------------------------------------------------------------------
If you want to support my KZbin-Channel you can donate here :
www.paypal.me/isimplybuiltit
----------------------------------------------------------------------------------------------------------------
FOLLOW ME ON
INSTAGRAMM :
/ i_simply_built_it
TWITTER :
/ isimplybuiltit
PINTEREST
www.pinterest.ch/isimplybuiltit/
FACEBOOK :
/ isimplybuiltit
-------------------------------------------------------------------------------
#ISimplyBuiltIt #like #comment
-------------------------------------------------------------------------------

[@The9mmProfessor]

💥mind blown.....from 6:08 on...My friend, those 11 and I half minutes I just spent here were very well spent. . At the Least. Thank you .

[@Manuel_E.]

This cool Gripper is waiting on my to do list. Well done!

[@artconnolly9519]

Love your channel and everything you build. This is why I watch youtube! Thank you for posting

[@ISIMPLYBUILTIT]

Thank you so much. I'm glad to read that.

[@derekstephens6768]

Very good, simple but effective design. I made one this week and am very pleased with the result, and its functionality and safety. Many thanks for sharing your creativity and expertise.

[@PapaGleb]

Another great video. Real pleasure watching you work!!!

[@ISIMPLYBUILTIT]

Thank you so much. I'm glad to read that.

[@stephanedenis5394]

Beautiful construction for a security tool that I really believe is effective. Thanks for sharing.

[@ISIMPLYBUILTIT]

Thanks

[@danceswithaardvarks3284]

That is so similar to the ones I made that I thought it was the same at first. Great job.

[@ISIMPLYBUILTIT]

Thanks

[@renobtankit6019]

great vid and build, thanks

[@jaykepley5238]

Very nicely done, as always!

[@ISIMPLYBUILTIT]

Thanks.

[@MindenMoose]

I really enjoy your videos and your knowledge. I am new to your channel but so happy i found you. Creative intelligent and well produced, these are among the finest instructional videos I have seen. Incidentally the hand holds on your cross cut sled are pure genius. Thanks.

[@ISIMPLYBUILTIT]

Thank you so much. I'm glad to read that. I really appreciate that.

[@vilod]

I love the background sound instead of music. Great edits too.

[@jmendo67]

Fantastic job, I will try to do it myself. Thank you

[@iye2008]

Great work! Thank you for sharing!

[@ISIMPLYBUILTIT]

Thanks

[@jimsilva5344]

So very glad I found you! Immediately downloaded the 1st video I have seen so I can follow along and make the build in my shop. I would pay $$$ to purchase plans, please consider offering this in the future.

[@CornerfieldShop]

Cool! Love to build this one day 😄👍

[@mvazquez2616]

"magnifik carpentry skillz"! thanx 4 the share buddy... ciao

[@rodpotts2666]

Another good one my friend.

[@ISIMPLYBUILTIT]

Thank you.

[@stevedockery3534]

Fantastic job my friend. I will have to watch this a few more times to be capable of making one for myself. Thanks for the great video.

[@stopdrinkingleftskoolaid6510]

Seriously? 😂 I learned SOOOO much!!!! I made the exact same one in as much time as this video ran for. I just followed your steps and kept up!!!

[@JohnSnow-vf8jo]

Nice one , LOL

[@martythompson1933]

Dude....impressive very impressive!!

[@fam.wagner186]

Top Teil, super gemacht prima Idee

[@ISIMPLYBUILTIT]

Vielen Dank

[@trevhaydon5090]

Great Build Sir.👍😁

[@ISIMPLYBUILTIT]

Thanks.

[@georgeeads8689]

Excellent. Very well done.

[@ISIMPLYBUILTIT]

Thanks.

[@adrianperalta7192]

Excelente!, hiciste fabricas la herramienta casera👍.Gracias a tu video inspirado

[@ISIMPLYBUILTIT]

Gracias. Me alegro si te gusta

[@Painless61]

No Talking makes your Videos 80% better ... 👍🏽

[@ISIMPLYBUILTIT]

Ok. I just speak in more complicated Projects.

[@Simsy5861]

Really nice project!

[@ISIMPLYBUILTIT]

Thanks.

[@edover50]

Nicely done, looking forward to making this now

[@ISIMPLYBUILTIT]

Thanks

Hello there. good idea. beautiful device working on a table. congratulations. greetings..

[@ISIMPLYBUILTIT]

Thank you.

[@grahamh1067]

now that is impressive! i will try to build one of those one day

[@ISIMPLYBUILTIT]

Thanks

[@terry2346]

Very Very Nice! New project for the summer when I can get into my garage! Too cold here in Minnesota right now! :)

[@franklettering]

Tip Top video and none of the usual KZbin faff.

[@Bianchi77]

cool idea, thanks :)

[@Randorf100]

thank you dude.

[@BobBob-eh5sb]

I’m glad I didn’t see a comment saying to just go buy one. Sure it would be easier, there is some pride in building your own. The big plus with yours is that if it’s not adjusted quite right for the cut and the blade runs into it, the piece that got cut and be easily replaced. I think that if I was going to make one of these, I’d make 2 of them and some spare parts. That way if one gets cut up you have a spare handy to continue. Then when done with the project replace the damaged part with a spare one. And maybe make a wider one or two for better control of larger pieces.

[@marklewis9959]

Great job 👌

[@ISIMPLYBUILTIT]

Thank you.

[@scarboroughmalc]

Your creations are fantastic but could you PLEASE give measurements for each project when you make the video it would help up your subscribers immensely when we try to build your projects.

[@princessanineveh]

Guess not..

[@30eesh]

@@princessanineveh 😂

[@josefranciscorojasluna3757]

Nice work.

[@kennethlemke9826]

Excellent

[@52Warlock]

Brilliant!

[@ISIMPLYBUILTIT]

Thank you.

[@mountainviewturning5319]

Great video nice ideal 👍

[@ISIMPLYBUILTIT]

Thanks

[@RandyandPetraJ]

Sehr gut! Like others, wish you had plans. Guess I'll have to design myself. ;-) Danke for the inspiration.

[@davesnedeker8068]

good work.

Muito bom trabalho...parabéns 😊

[@primacustomworks]

New subcriber because of this video, thank you very much for sharing, you just save me a fortune. :)

[@salvatoresalvio204]

OTTIMO VIDEO. ESAUSTIVO E INTERESSANTE NELLE SEGUEZE VIDEO. SALUTI SALVIO

[@rubenalfonzo33]

hello brother a query I write from Venezuela and I congratulate you for all your projects

[@ISIMPLYBUILTIT]

Thank you so much.

[@rubenalfonzo33]

friend good afternoon I can ask you to see if you make several pieces of bone wood "tools can you make ???

[@JuliC]

Great build. Would love to purchase the plans for it please.

[@braniams]

Nice job. New subscriber

[@ISIMPLYBUILTIT]

Thanks.

[@jarmstrong2843]

Nice idea on table saw sled for hand holes. They definitely keep hands away from blade.

[@HeatherTheHippyGardener]

Would love plans for this. :)

[@MadAsKiwi]

Nice work. I was wondering if you are willing to make the dimensions or plans available? Your version seems much more straight forward than others I have seen, so it would be nice to give it a go. Thank you for sharing

[@ISIMPLYBUILTIT]

Thanks. Maybe i can make plans sometimes.

[@MadAsKiwi]

@@ISIMPLYBUILTIT , thank you. I think there are a few people that would appreciate that

[@miguelromero1]

MadAsKiwi i know i would

[@SageRonin]

Me too!

[@richardnoble7170]

Me three

[@TheWhatsitgonnabe]

Nice Push block & (Sanding block at 5:16). I gotta find the video to make one of those! :)

[@timlist4173]

do you have the plans available for this push gripper? How about that sanding block? That is really cool.

[@TheLastPharm]

How many people were also distracted by that amazing homemade sanding block he has?

[@davestevens7768]

is there any chance that you could supply a schematic for this brilliant push block?

[@rejeanwolfe3756]

I wish I could order the available plans.Great Gripper. Tks a lot

[@rosivo3142]

yeeeaaaaahhhh nice

[@colemahaney4208]

I made 2 lov them

[@misterleclair]

Beautiful work as always. What is the name of the clamp with the little black handle?

[@ISIMPLYBUILTIT]

Thanks. I think you mean this one www.amazon.com/Bessey-KLI3-012-12-Inch-Ratcheting-KliKlamp/dp/B00008K2TE/ref=sr_1_47?keywords=bessey+clamp&qid=1573193707&sr=8-47

[@lorespinra]

great

[@harrysstuff247]

Amazing job, gave me a bit of anxiety at the very end though near that blade.

[@CharlesNolanArt]

As fast as you ran the video I found it difficult to follow so I slowed it down but I still could not follow the work you did here. Don't get me wrong, it is stunning, much better than a purchased one. I could never do this. It was fun to watch you however.

[@fransrasmussen3052]

i like this project, but i got 2 questions for you. nr.1. is that ander 1 you built and nr.2. do you have plans for both of them?

[@joaoluis1744]

Ta muito fixe

[@StreetKingz4Life]

Great review may i ask what type of countersunk drill bit you used on the bosch drill please.

[@ISIMPLYBUILTIT]

I use a countersunk drill from Wolfcraft : www.amazon.de/Wolfcraft-2544000-Senkbohrer-mit-Tiefenstopp/dp/B002OHNH16/ref=sr_1_13?__mk_de_DE=ÅMÅŽÕÑ&crid=21TALI39FSR40&keywords=wolfcraft+senker+mit+tiefenstop&qid=1573822399&sprefix=wolfcraft+senker%2Caps%2C161&sr=8-13 . But this one should work in the same way : www.amazon.com/dp/B07KKLCGRY/ref=sr_1_16?__mk_de_DE=ÅMÅŽÕÑ&keywords=countersunk+drill+with+depth+stop&qid=1573822567&sr=8-16 . You just have to choose the one with the diameter you need.

[@StreetKingz4Life]

@@ISIMPLYBUILTIT Thanks a lot

[@anatolborowicz2294]

Świetny filmik ! Szkoda tylko, że nie ma podanych wymiarów ...

[@larsonbennett5903]

Very nice! What was the material you used to make it grip?

[@ISIMPLYBUILTIT]

Thanks. It's something like this. www.amazon.com/dp/B07MNW8QR1/ref=sr_1_52?__mk_de_DE=ÅMÅŽÕÑ&crid=ZVYVT0IOIV88&keywords=self+adhesive+acoustic+foam&qid=1573823813&sprefix=self+adhesive+ac%2Caps%2C241&sr=8-52

[@TheWoodWorkingPilot]

Well done! Do you have any plans for it?

[@daisycorta3340]

He has plans for safety

[@ISIMPLYBUILTIT]

Maybe i can make plans sometimes.

[@TheWoodWorkingPilot]

I SIMPLY BUILT IT looking foreword for it. I’d love to make one

[@TigerCarpenter]

very nice! grr-rip(per) off :P

[@TheoTHERON_SA]

I didn't see any comment in the comments. The only other thing I would consider to add(in case I have missed it in your model), is like a little 'hook' on the 'arm' that slides along your fence (our far left as we see the video) to help push the wood along. Just the same way than a normal push stick. hope that makes sense. Other than that I love your model.

[@ISIMPLYBUILTIT]

Thanks. That's a nice idea.

[@jonanovas]

Great video. Thanks for sharing. Do you have some drawings with the size of all pieces. If you don't mind could you share those in the video description? Best regards Valentin

[@ISIMPLYBUILTIT]

No i made it without plans. Maybe i can make plans sometimes.

[@bernarddouthit4647]

This looks really cool, but are the design documents posted somewhere? It's hard to follow every step from the video. Thanks.

[@63Arnast]

Hi.. Was there ever any plans for this done?

[@pascalhoarau5030]

Good morning Do you have the plan of the clamp pusher block please? Thank you so much. Beautiful achievement.

[@rejeanwolfe3756]

Any plans available? Tks for sharing

[@Papa_D]

Very nice ! Where did you get the rubber to glue on the bottom ? :-)

[@ISIMPLYBUILTIT]

Thanks. I ordered it from Amazon.de : www.amazon.de/gp/product/B00BSAAB1E/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1 . Maybe this from Amazon.com could work : www.amazon.com/Weather-Density-Adhesive-Weatherstrip-Insulation/dp/B07477J8KL/ref=sr_1_17?crid=16MTA9VZIZDN9&keywords=self+adhesive+sealing+strip+tape&qid=1573193947&sprefix=self+adhesive+seal%2Caps%2C227&sr=8-17

[@norastackhouse]

I was wanting plans for this if you have them available. Can you please let me know where.

[@loknut6614]

What material do you use for grip at the base of the push block? Thanks

[@richardmilner4392]

do you have blueprints for this or at least the measurements for it

[@francisr6804]

Nicely done, how you call this router bit type ?

[@ISIMPLYBUILTIT]

Thanks. It's a T-Nut Router Bit

[@barnyardkh4]

Sometimes called a key-hole bit too.

[@trokt2]

What size router bit? What width plywood? Thanks in advance. Great video.

[@daniemeyer5865]

Plans would be nice.Thanx.

[@ljlatorre1943]

Could you make available plans or parts list??

[@ISIMPLYBUILTIT]

Maybe i can make plans sometimes.

[@barnyardkh4]

I would suggest building this with wood and CA glue and eliminate a lot of the metal hardware. I'd want to eliminate as much risk as possible of hitting a screw or bolt with the saw if I accidentally ran it over the blade. Nice MicroJig copy though.

[@ISIMPLYBUILTIT]

Thanks. I think this screws should not be a problem because they will never came near the blade.

[@paulusx11]

What anti slip material did you use plss. TIA

[@ISIMPLYBUILTIT]

I ordered it from Amazon.de : www.amazon.de/gp/product/B00BSAAB1E/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1 . Maybe this from Amazon.com could work : www.amazon.com/Weather-Density-Adhesive-Weatherstrip-Insulation/dp/B07477J8KL/ref=sr_1_17?crid=16MTA9VZIZDN9&keywords=self+adhesive+sealing+strip+tape&qid=1573193947&sprefix=self+adhesive+seal%2Caps%2C227&sr=8-17

[@pauligysin]

Glückwunsch !! das ist ein interessantes Teil (sorry bei einem Schweizer antworte ich nur auf Schriftdeutsch, mein Basler Dialekt wäre nicht so gut) Das Ding werde ich mir nachbauen da ich die amerikanischen Plastikteile hasse. In meiner Werkstatt will ab und zu die halbe Familie (alles Südamerikaner) etwas mit helfen und dann wird es gefährlich, denn ich bin der einzige Handwerker der sein Handwerk auch von Grund auf gelernt hat und so habe ich auch Respekt vor den Maschinen. Frage: wo hast Du diesen T-Nut Fräser her (den möchte ich mir bei meiner nächsten Reise in die Schweiz kaufen, das bekomme ich hier in Südamerika nicht

[@ISIMPLYBUILTIT]

Freut mich wenn es Dir gefällt. Meiner Frau und meiner Tochter ist es zu laut in meiner Werkstatt. Ich habe den T-Nut Fräset in Deutschland bestellt. Ist ein wenig günstiger. Habe ihn hier bei Amazon.de bestellt : www.amazon.de/gp/product/B07F8BDL8P/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1

[@banditva8040]

Do you have plans for this push block.

[@harrypowers9412]

I Really like your videos-I wish you could slow down the fast forward action a bit though, so it would be easier to follow. 👍🏻

[@trickster11300]

Harry Powers I’ve got to agree! I sometimes feel like he is trying to induce an epileptic fit. Great videos well presented and explained, spoiled by the speed.

[@andyboybennett]

Why is your splitter set so high? Doesn't it only need to be level with the blade?

[@franceshawe9572]

Possibly to enable installation of a dust guard

[@banditva8040]

Any plans for this push block

[@user-ti5df1jg7t]

👍

[@sureshkumar4140]

Please send me measurements, I would like to make one

[@Mr_Rick]

Any plans or dim info?

[@Nolanryan1968]

Hi very nice like you build do you have the plans for it. I would like to build one for my daughter. she is starting to build in my shop. So pround

[@ISIMPLYBUILTIT]

Thanks. No i have no plans yet. I made it without plans.

[@ronwatkins5775]

Are there plans or templates available?

[@ISIMPLYBUILTIT]

Not yet. Maybe i can make plans sometimes.

[@jenileetirado1090]

Sell one? I’m new to using my table saw, how much?

[@andy349ber3]

Do you have any plans for any of your stuff please let me know

[@docolemnsx]

It's astonishing how many people are asking for plans on a channel called I SIMPLY BUILT IT.

[@JohnWaclawski]

Any plans for this? Would gladly send some money to you if there were plans for your projects.

[@michelyelle]

you have the plans