THIS DID NOT GO AS PLANNED - FIRST DAY ON 1ST GEN CUMMINS STRAIGHT PIPED!!

FIRST DAY WORKING ON OL' PAP SCRAP!
HIT THAT LIKE BUTTON!!! AND SUBSCRIBE!!!
FOLLOW THE CREW & I...
@_greg_a_ @aalberalla @jessejames322 @johnny_sendit
SEND US STUFF HERE!! - P.O. BOX 117 HAMPTON NJ 08827
WHERE I BUY ALL MY PARTS!!! - GAROFALO ENTERPRISES
MICHAEL @ 570-702-2226 & GAROFALOENT.COM
LET HIM KNOW GREG SENT YOU!!!
Song: Kontinuum - Lost (feat. Savoi) [JJD Remix]
Music provided by NoCopyrightSounds.
Video Link: • Kontinuum - Lost (feat...
Download: ncs.io/LostJJDR...

[@Cumminslife]

I've worked with a few 1st gens and honestly if your considering a dana 80 swap the best way in my opinion is find yourself a wrecked 2nd gen. Nv4500-dana80-ppump donor truck. If I was to do it again, I would just swap the 1st gen cab/box onto a 2nd gen frame. 1st gen front leaf and steering setup really sucks.

[@ToKiiNz]

thats the smart thing but it looks like hes short on space and that makes a axle swap and trans swap which are already a project into a fucking full on commitment

[@johnmahon3460]

or just buy a 2nd gen

[@ToKiiNz]

John Mahon or spend the same money since people want triple their value and find a decent 6.0. they are just as good at making power under 1k dont have garbo trans and built better

[@ToKiiNz]

John Mahon is it because you dont like that bulletproofed 6.0s are better then second gens? and cost virtually the same

[@johnmahon3460]

I bought mine for 2900 so 96 2500 4wd manual that's better then ur throwaway

[@2006megablue]

Pulling the rear axle shafts an popping the bearings out is so easy bet you guys would get a like for pulling them apart.. Keep it old school like a 12v should be

[@jacobpritchard4847]

Hey Greg, I've been watching everyone of your videos and I have a 91.5 d250 just like yours it's Intercooled, auto, and it's my first truck. I got it from a farmer when I was 14 for $2000 it's a 91.5 d250 auto no rust and 138k miles it's so similar to this truck to not even funny. Identical condition, surface rust on the frame and stuff but no actual rot. I'm 16 almost 17 now and I've straight piped it, made a intake for it using the factory air box and just making more holes for airflow and added a filter and made a cover out of plexiglass so it's clear and looks cool and bought some 4in exhaust pipe from a local shop and cut it to fit and bought silicone boots. Also I fixed the kdp and replaced the seal and valve lash adjusted and new valve cover gaskets. And fluids and maintenance and stuff. Also I had a 12mm ve pump built its fully benched and performance calibrated and I just need brakes, front end rebuilt, and new injectors cause I have a bad one and it will be ready to daily drive. Love the build keep it up.

[@JohnnyKoch]

If you ever had one truck one turbo and one chance to mod everything you ever wanted in one season.. would u capture it or just let it sit?

[@Tyronejames52]

Johnny Koch top comment😂😂

[@JohnnyKoch]

Muxcle Man 🐼 Panda 🐼 panda

[@SubnormalSwine]

thats awesome

[@kevinhawk5281]

I feel the same way about bees, wasps, yellow jackets, anything that can fly and has a sting I'm out. New to the channel and its great, I have an '08 and a '91 i love the tow pig. Keep up the good work.

[@alecparkes5036]

i fully support a 80 in the rear and disks all the way around

[@dustinwhite5508]

So stoked to see this beast get finished

[@Izzabumminz]

I did a dana 80 disk swap on my 99 cummins and I love it can't wait till the brakes wear down for the 3rd gen rotor upgrade

[@edwinj8275]

Love this build!! Can't wait for upcoming videos

[@keatonsamples9330]

Ive always used the nut on the pump gear to bar the engine over but sometimes that can get a little messy

[@heathermiddleton4968]

I love the first gen, hope I can buy one someday

[@carsonschultz4931]

Can't wait to see that beast done

[@Scofflaw_k10]

I couldn't tell from the angle, is it a factory LSD? If it is, I'd spend the $100 in parts to rebuild the brakes, and get the drums turned. If it isn't a LSD, then it would probably be cheaper to rear swap it. Can't be having the one wheel peel!

[@willm5723]

Dana 80 SRW is significantly wider than the 70. I'd stick with the 70. I've had some brake problems with mine, and have pulled the axle and drum probably a dozen times in the last 2 years. You get use to it. Lol

[@greasymechanic]

Man, I sure do miss my ol 93... 3800 gov spring and a fuel pin make them trucks run great by the way. I'm sure y'all will go a lot further than just that though. look forward to seein what ya guys do!

[@andrewbartleman9169]

greasymechanic with heavier valve springs too right?

[@greasymechanic]

It's advised but not 100% necessary. kinda like head studs

[@andrewbartleman9169]

greasymechanic yeah I thought the valves would float over 3500rpm. I want to get a 3400rpm spring . I have done a lot of pump mods straight piped side dump behind cab. I also use diesel additive and some bio diesel for pump lube. since the new ulsd diesel is so dry it is not good for our old ve pumps. It has been tested that 2%bio diesel is the best for lubricity. Better than 2 stroke oil or Howes diesel lubricant,Power service additives etc..

[@moose5.9]

hell yeah straight piped 12v's sound sick

[@Hemi24]

Because of yall, i went out and got a bag of the starburst gummies and ate the whole bag on my 45 min drive home from work .. made me sick .. hope to do it soon .. lol

[@builtforthewild3190]

Dana 80 Dana 80

[@sethh8365]

Steam Jenny type machine would help cleaning it off big time plus the ol lady might like a steam tool, cuz that helps. no opinion on the rear but disc's are preferable. Good job boys

[@sethh8365]

They make disc conversions for that too, pretty cheap.

[@draconian7729]

I'm with you on the Bee issue! Someone else go do it! Lol

[@KyleKeierleber]

Feelin' spoiled daily videos from you guys

[@elibrown9442]

Fuel leak looks to becoming from your fuel supply line fitting to the pump;)

[@levim6417]

You're not the only one who doesn't do bees... don't matter how excited I am to do an install, if there's bees swarming, I'm out lol

[@henrywilliams8784]

I'm addicted to this channel

[@scottysohotty2269]

Tomcat and I love what you are doing, my man.

[@andreaclarke1323]

just ordered a new 2500 limited. keep the vids coming. need some great ideas

[@judes5475]

All black would be nice on that first gen!!!

[@franktonfire]

Greg, if you're gonna make it a race truck, you may as well throw the money in for a Dana 80 with the disc brakes. Judging by how old that diff fluid was, there's a pretty good chance that rear diff isn't gonna last long, especially under a lot of power like you want to make. So if I were you I'd bite the bullet and buy the 80.

[@alvinfink589]

Sounds WAY better!!!

[@paricruwe4423]

GREG! what would it take for me to get the black over the fender plastics I have been looking for a set forever! I have a 1991 d150 that I have been restoring for the past year I bought it when I turned 15 and I drive it every day now. love the show always look forward to watching all the stuff you guys do thanks!!

[@claytonneel9115]

rollpan the bumpers

[@ShnitzlHaus]

you need a magnetic sweeper they are the best for lost hardware.

[@Korupt7676]

rollllll paaaaann

[@Motherfunded]

Just a question could we get some playlists of the different trucks like the 05 videos in one the tow truck one for scrap truck and other first gen stuff

[@CHVLKiD]

Totally know what it's like to find way more than expected when diving in for the first time 😂😢👍🏻

[@incompletehunter]

Look at it this way, if you ever do make horsepower with it it will already have good brakes and a stronger rearend.

[@drewl4762]

so much more room for activities

[@dawsoncooney9671]

hey I watch your videos all the time and have the same truck , I have a paddle overtime I go from park to drive after warm up I'm thinking its the exhaust just shaking like crazy what do you think ?

[@bornbehindbars2010]

Yes Dana 80!

[@MatthewJones-pw1fm]

Don't worry your lawnmower will find the bolt

[@rustyshacklfort9508]

I know your ocd and all but let it leak and find yourself d80 but take your time to find it cheap , I really like budget aspect of this truck

[@LightWaIker]

Thumbs up for straight pipe. Go for Dana 80.

[@iminsane84]

greg since you lost that bolt you should of had a magnet sweeper

[@cssplayer19]

might as well upgrade to disc brakes in the rear if they sell a kit for it

[@NicT09]

Do a Dana 80 disk rear end but put the rear bumper back on. Don't roll pan it!

[@Ploppinbass6]

Wish I had the free time to do all this stuff lol 60 to 70+ hour work weeks suck

[@jays4forces]

I can't do bee spiders snakes or wasp. opened my door and. noticed a couple webs inside haha noooope

[@dreago6918]

you guys need a magnet broom for lost parts lol

[@Historiot]

I'll sub. For more 12 valve videos

[@wilfreddompierre5620]

keeping the decals / emblems ? Greg ? Will pay.

[@erickhechizo5738]

come on greg i really think you can do seal and brakes on that dana 70 it is not hard at all . you might spend at the most $150 , dana 80 it is no gonna be cheap at all and you still gonna have to do brakes maybe seals so what is the point of the swap btw i was your number 10 subscriber i really like the channel

[@ksiregain]

what kinda Oakleys are No Boost wearing? I know they are infinite hero editions but what style

[@BrowerBandit]

isn't that rear Axle a AAM 11.5" 14 bolt Axle?

[@kentuckysmoose]

Use a magnet and sweep the grass til you find it

[@matthewmatthew5755]

Get that truck a underbody wash

[@JC-yt8om]

My 01 with Dana 80 disc was nothing compared to how my drum 80 stopped in my 97. I vote leave the drum.

[@Odd_Redneck]

just throw on a new rear alxe, its going to be insane work on.

[@EchosKaos]

I'm allergic to bees I feel you

[@JR-xi2ht]

more vids of ryans 4th gen

[@gt40x4]

Do the dana 80!

[@calvindenny1468]

Dana 80 drum brakes are a pain

[@customfab9144]

go with the new axle

[@williamliles3498]

roll pan maybe??

[@toddsmith889]

Scrap truck update?

[@buildforbroke]

Dude. Change the axle and put one under the front!

[@littlejimmy2164]

11.5" AAM

[@DavidMiller-pp8bl]

Do a Dana 80

[@blakebrady5712]

A bee stung me in the face and my left eye was swollen shut for 3 days

[@Vincepuller]

invest in quality gaskets and seals for the rear end. Dana 70s are strong and are easy to clean up. make sure you buy the special axle nut socket. no offense but less talking and more working will get you very far.

[@guuguguguggug]

Slam the 12V

[@buick4013]

just drive it

[@un_average_gang]

just do the 80 and get it over with.

[@burgerliker11]

this rear brakes literally only take an hour lol

[@dylloncoil3438]

Get Dana 80. Still go with hood stack.

[@JoeJoe-bz9nb]

I will have a set of stage 2 dynamite diesel injector that I will donate to the cause when I swap them out they are only 2 months old. I will have no use for them.as soon as I get them they I will ship them out

[@greendodge98]

Dont pull that dent just put a flat basketball behind the panell and air it up.

[@nickroberts3567]

Don't cheap out

[@heavyd125780]

Why do i always get Ford ads when watching your videos???

[@austinbollin8231]

make the first generation the tow rig

[@jonfroio3700]

P pump it and put a cam in it

[@damonsurber5567]

can do pulling please do it

[@cocopuffniro]

She needs a lift kit and a 4x4 swap

[@865speed]

hopefully the lawn mower doesn't find that bolt and hit one of the nice trucks. like the tow pig I would call in a search party

[@TheFullback44]

Dana 80

[@khadijagwen]

That axle is like that because of the diesel. Just work a little and learn how to maintain it. Don't be lazy.

[@mickeyg4444]

dana 80, do it

[@robertsd3771]

do a diff swap

[@phogelbice]

I'll get you some gummies for your moldings =)

[@_greg_a]

i'd send them to ya, but there beyond no good lol

[@phogelbice]

Thanks for your offer but I live overseas, there is probably no more then ten 1gen cummins in my country. Glad I found your channel love the 1gen!

[@driftboys6780]

Keep it original

[@raymundo7687]

Do it once ,or do it twice

[@zacharysarault3254]

bro i am the same way i don't like bees ether

[@joenininger5925]

1like

[@jamesatkins2080]

Take ur time,don't u have more to pay at home?.don't made the wife mad,leave it nature,don't mess with it.

[@RenatodeSouza21]

Good afternoon friend!! Have you thought about making the caption available in your videos? I watch here from Brazil, and my English is not the best and with the subtitles in the videos would help a lot! Thank you!

[@andrewbartleman9169]

GREG_ALBERALLA your sound is awful through whatever you use to record. It is so tingy

[@jacobmcavoy9029]

Jesse's snapchat?

[@joenininger5925]

1 comments

[@EvanCaron]

nice! come check out my truck and my channel!

[@matthewmatthew5755]

8 inch diamond stack

[@alexandergordon8477]

"lets take off everything that makes it a truck, and thats actually cool and ruin it"