This Gearbox is So Powerful it can Pull a CAR! (3D Printed)

[@JoseSilveira-newhandleforYT]

Really impressive! I expected the gear teeth to be stripped off and, instead, it broke the rope.

[@retsetman9698]

Thank you! It was fun project:)

[@JoseSilveira-newhandleforYT]

@@retsetman9698 I believe you! It far exceeded my expectations when I saw it in my suggested videos :-)

[@haramarhara]

Impressive. Deserves way more views for the production quality.

[@retsetman9698]

Thanks man!

[@dbrokim4314]

Op00

[@jaleger2295]

Are you fucking high? This is the shittiest “production quality” I’ve seen in any video of this kind 😂😂😂

[@s.h7124]

Majority of people are stupid the more complex is the thwart the less people interested there we have Biden as president and now the Biden regime making more stupid people

[@krissk.1778]

The world need someone so creative like you! Thank you so much.

[@atinisikenkoyboy]

Abicim ben seni yabancı zannediyordum videoları bakıp adamlar ne yapmış helal olsun diyordum plakadan türk olduğunu anladım helal olsun sana reis videolar çok iyi emeğine sağlık

Halıdan anladım direkt

[@airmag]

@ Ben rulman üzerindeki Turkey yazısından, herkesin bakış açısı nasıl da farklı :))

[@burakpoyraz6336]

Ben başka bir videodaki damacanada yazan erikli yazısından

[@mohdrehan4308]

P9póp

[@Ms-ve1lx]

34 palkasından hemşerim olduğunu bile anladım

[@gaussgreen7921]

0:32 top quality animation, two mating gears spinning in the same direction :D

[@beyonddeepindustries2586]

thank you this helped me realize what i was doing wrong with my gears

[@uattias]

I love that you just show your registerplate whit out burring it out. 4:53

[@Foersom_]

Well made gearbox. I am also amazed to see that you can repair the frame with simple reheating the plastic without it later being too weak at those same breaking lines.

[@AiTool899]

Bu demir kapı bile acabilir. Guzel proje, eline saglik...

[@ercümentalpaslan]

tebrik ederim çok güzel olmuş umarım istediğin yerler gelirsin

[@yunusgondermez5566]

Eline sağlık. Güzel olmuş. Böyle şeyler yabancı ülkelerden görüyorduk. Türkiye den olunca ayrı bir sevindim. Tekrardan Eline sağlık

[@Jim_One-wl4ke]

wow 🤩 impressive with that tiny motor. Give it a metal frame and gears really can do wonders with that torque. ❤thanks for sharing

[@MaxImagination]

Very impressive mechanism, great job, bro! Keep it up! :)

[@shottysteve]

thanks for the license plate. now im gonna do absolutely nothing with it

[@bendtherules0]

4:54

[@ceser33]

Heartly congrats my friend!! you did it!!!!

[@muhammetgirgin6148]

Elinize kolunuza sağlık harika bir çalışma :)

[@johnhardy1677]

Very interesting mechanism you made here well done!! i had a few thoughts if your interested?? 1 heavier gauge wiring to limit loss of power due to heat? 2 properly mounting your winch frame to remove all the variables of the rope stretching back and forth (thats energy loss) 3 a couple snatch blocks and maybe a nano cable or something similar? I realize this doesnt change the output of your gear box but might be cool to see its potential to do something truely surprising. You seem to have a great understanding of worm gear design ! There are many more designs show me another? Thanks

[@techfinderlk1613]

Kamaal hai yaar its really amazing💥

[@fikretkaya8162]

Tebrik ederim hep yabancilari takip etmekten umudum tukeniyordu 👏👏

[@SaintMatthieuSimard]

4:11 "It's fun!" Heck yeah!

[@jmk20083]

I don't think it can pull me outta bed in the morning

[@rabbitkinggod4602]

0:30 Idk how to say this, but the animation for the pink and red gears are wrong there turning the same way.

[@JWSmythe]

That's a good demonstration of how little force is required to move a car. You can push a car in neutral, and it will move fairly easily, across flat terrain. You should have put a pull scale behind it, to show force behind it. And obviously, if you changed the gearing, you could move more weight, but even slower. Compound pullies would increase the amount of weight the string would support too. Moving the supporting strings to the axle would even mitigate the need for the stronger frame or gears. You could lift the entire car off the ground, with sufficient planning. It looks like the string you're using would require about 16 loops on compound pullies, or 32 static lines. There's a bunch of relevant math that I'm not going to do. :)

[@김시진-j2y]

I enjoyed the video! In my opinion, if you use a pulley and a metal string, you can lift high-weight objects with a little less force.

[@wjf213]

This is very cool. I have been kicking around an idea like this but with a 300 watt 48vdc scooter motor to make a mini winch for my 2wd ebike that I take off road and mudding here in Texas. It's heavy, around 110 pounds or 50kgs, but when stuck, it's twice that weight with the mire factor figured in. The smallest motor I can find in 48vdc are 500 watt motors. You should design and build a duel motor winch like this or one with a scooter motor and see what it will pull. Keep up the great work.

[@hocinebooster1258]

Good

[@cynic5581]

Great video keep up the good work! I can’t help from wonder if there is a voltage drop under load with the wires just hand wound around the battery terminals. Higher the current (load) the more resistance (loose connection) will restrict voltage thus artificially limiting your power (watts). If there is a measurable drop you could just print some clamps to go around your wires to maximize the contact patch.

[@Chevindu]

Nice project 👍 small question, do you have at least a rough estimate for how much current was the motor drawing?

[@retsetman9698]

Thank's, probably max 15A

[@joeyrock]

A very interesting and well-made video.

[@yashrajoria327]

Could you possible use a high torque motor to make the system more reliable?

[@johnnymaboane1781]

Just what I needed for my next agricultural project thanks a million

[@mr.russerzplace...1448]

Other factors with winch assemblies to cause torque problems : the size of spool that your line is being spooled onto : witch way your line is spooling ..the top of spool or bottom just to name a few . You are very talented machinist of home projects on a higher than normal level . I've never utilized a 3d printing machine yet . I build many things in my yard without welding or really much more than bench grinder , angle grinder, corded drill , cordless drill. Drill press from 1960, files , self tappers, ect. I managed to build a 55 mph garden tractor out of pulleys , belts , modified centrifugal clutch ..actually I've built 3 of them with different drive systems , my most recent almost success very difficult was to build an o scale truck and motor assembly for an old gp9 diesel loco that was broken beyond ..I don't suppose you build items for folks that pay do you ? Or even accept a challenge that is suggested such as the locomotive motor assembly ? I bet you could do it no doubt ..message me back please Im liking subscribing to your channel now thanks . ( add a block to double pulling force to your machine)

Hello my friend. You have created a beautiful electric winch scope with 3 D printing. A beautiful worm gearbox design. Magnificently strong. congratulations. Thank you for sharing. See you. Big greetings.

[@retsetman9698]

Thank you my friend😊👍see you, greetings..👋👍

[@emirakpnar4635]

iki türk ingilizce konuşuyolar

[@arda4049]

Senin türk olduğunu biliyordum reis plakayı gördüm doğruladı adamsın çok iyi işler yapıyorsun aboneden oldum

[@othoapproto9603]

THanks, gives me hope for my idea.

[@tobortwo3697]

Could varying the thread distance (pitch) allow you to change the gear ratio along one shaft? For instance, if it was used in a vehicle moving the gear further forward would change the gear ratio and increase speed.

[@monhi64]

I think so but doubt you’d actually want to increase the thread distance. Instead just add more spirals to the worm, maybe one or two instead of three

[@kensmechanicalaffair]

Cool idea.

[@10poundsimracing14]

Cool design

[@AceroCarbono]

That was great, but I think you can prevent the box from breaking adding more filler

[@catamures1]

Well done, again. 😃

[@retsetman9698]

Thanks dude:)

[@gavinsu919]

Impressive! Great job!

[@UnWindandUnplug]

I don't know which is more surprising the fact that the winch is strong enough to p.ull the car or the fact that the string is strong enough to pull the car.

[@araaamikaraaamikyan3525]

NICE IDEA . ... BRAVO .... EXCELLENT 👏👏👏👏 👍👍👍👍

[@smallgamesplays4958]

When 3d printed parts and a moter work together to go super saiyan.

[@retsetman9698]

Hope it can go beyond from super saiyan

[@BuildCreation]

Thats Awesome My Dear!

[@retsetman9698]

Thank you so much bro!

[@jwonderfulsuccess]

Excellent job 🙏🕊

[@Netosilvagames]

I'm ashamed. I'M ASHAMED OF THAT ROPE BEING WEAK! Lol God damn, that little gearbox is really strong, great job!

[@the1trancedemon]

Mind blowing torque

[@irfanmajeed1]

Good job. Can you tell me, is it rolling backwards due to the weight and it's gravity? Or stops at it's position where it is stopped. ?

[@MaryOparaChannel]

Hey friend, this is awesome. You are very creative. Amazing!!!

[@samuelramesh8621]

@Retsetman Awesome tourque machine. Amazed to see that those plastic gears did not break. How much watts does this machine took to pull car/water can(s) (VDC and Amps please)

[@fralinsandfriends]

That was fun to watch. Great video. 😀👋💖

[@retsetman9698]

Thank you:)

[@jimmyhallee4603]

Great...same motor 2x string ?

[@azfarizhar334]

that rope attached to it is actually powerful

[@David-eb6zp]

Wow amazing work, thanks for sharing the stl 🌟

[@apex31]

Abi ben seni yabancı sanardım böyle kaliteli videolardan arabanın plakasıyla jeton düştü :D

[@RixtronixLAB]

Nice info, thanks for sharing :)

[@a27ylm]

Thank you, King of Engineering. I want a service from you. I have a stair lift project, but I could not determine the type of motor and gear box from the available tools. Of course, I am your brother from Yemen

[@osmanpasha_diy]

The sounds are genuinely frightening

[@woodandwandco]

The little engine that could!

[@Oddman1980]

I'm going to print one of these for my Samurai.

[@clarkkent4872]

How the plastic was fixed together @5:16 ? Just by heating?

[@retsetman9698]

Yes just by heating

[@grachev86]

Thank you for the video! It is good job!

[@retsetman9698]

Thank you!

[@HansvanBinsbergen]

Nice work keep em comming

[@HansvanBinsbergen]

What would have happened if you just had used one pulley at the other end to return the cable back to the block

[@justkaya11]

türkmüydün :) plakayı görünce farkettim ve sevindim kral adamsın

[@Fylnnn]

Thanks for giving that gear a grease

[@RGV2300]

The little 3d printed wincher that could.

[@wendang4806]

Great job! I feel like I've seen similar thing in a power window motor? 🤔

[@johnhardy1677]

Cause you have lol exactly the same thing lol only difference is a window motor wount work both ways without wadding up without gravity to keep it tight but the same exact gear system

[@darkshadowsx5949]

as soon as i seen the cheap nylon rope i new it was going to break. that skinny rope is probably rated to around 90-120 lbs. also knots reduce strength by 50%

[@retsetman9698]

Actually, that is steel rope inside, it's just nylon coated on the outside. But, still broke

[@BluehawkOne]

Great video.

[@retsetman9698]

Thank you👍

[@mr.russerzplace...1448]

Keep going your way cool !!

[@5phutsangtao-iQ]

efficient mini winch machine

[@ahmetatik9572]

Thank you bro

[@djsnackcakes2795]

It's hard to believe that pla can be that strong

[@spacecowboy07723]

Power of gears

[@UltraGamma25]

A magnificent winch

[@7080100]

Wht printer do you have... Whts the material used...?? 🤔🤔🤔

[@tristinl5384]

You gotta add a pulley to max out that pull weight lol. Great design awesome video 😊

[@grannysvids]

Wow, what was the cord made from?

[@dimmer4955]

On a hard and level surface with tire pressure above normal and in neutral gear, the car can move simply with a gust of wind.

[@ravigujjar956]

One day you pull a plane with this 😁😁😁

[@hasandemir5129]

Emeğine sağlık. Müthiş olmuş👏👏

[@pcka12]

Just The Principal of Levers in action! Of course these are round levers as opposed to classical levers.

[@deangarner4]

Given the attention to the production quality, why didn't we get a full shot of the vehicle?

[@inayatullah6190]

Thank you

[@miodragalempijevic70]

Do you be kind to tell me mark and type of 3D printer you used to make this ?

[@retsetman9698]

It was actually tevo tarantula

[@billallen8396]

Did you film the car pulling first or switch back to the all-thread without the bearings because it wasn't pulling downward

[@sainikhilchowdarypavuluri3091]

A very good project !! well done. Thank you for sharing.

[@jajasudrajat8152]

One word "awesome"

[@TheeSurferJim]

I made your gearbox today at 50% size cannot wait to hook it up and add the steel and lube. Awesome design 🙂

[@recepefekoc7141]

Yabancı kanal zannediyordum, takii plakayı görene kadar ;) tebrikler harika olmuş

[@boipc]

Works great in situations that don't need help.

[@baraBober]

Interesting project!

[@akashmdeepmaurya24]

Pretty impressive

[@DCW_B63]

I'm just wondering how much power is being consumed by that tiny dc motor??? Do you have any detailed discussion video over it?, I can't believe coz the size of the motor is too tiny and we can just stop this sized motor by gripping between two fingers

[@retsetman9698]

It’s actually not that easy to stop it by fingers and about 100-120 watt.

[@wqh6096]

You should use iron gear and shell, thicker rope, and larger tooth ratio.

[@ajayattul5692]

Hi , Restman pls I wish to seethe calculations of gear ratio and load. Can you pls share 😊🙏

[@mertbatmaz5092]

Güzel projeler

[@Nickporter17]

You think resin printed gears could hold up?

[@retsetman9698]

I don’t know much about the resin prints but I think it doesn’t make it

[@Nickporter17]

@@retsetman9698 I think you're right. Thanks.

[@ScottWoot]

If used as a hoist, would this design hold the object at the current height without power applied to the motor?

[@mikunakano1432]

Idk why is there so many result about 3d print and some of it was broke while testing so how have a best 3d print worm gear?

[@saurabhlanje1709]

Awesome 👌👌👌👌, in which software you designed this worm be wheel?

[@retsetman9698]

I used Fusion 360

[@vanhelsing4880]

Woooow you are champion ☝👍💣📣