This HEAVY Duty Jig Has A Secret!

[@TheWeaversofEternity]

WOE Paracord Store ▶ paracordweavers.com/?sca_ref=6422991.Yrw6WNlrgE GET MY FREE EBOOK ▶ www.weaversofeternity.com/freebook

[@World_of_Art2025]

Haha “paraneck” . I know what I’m going to get for my birthday 🤩

[@TheWeaversofEternity]

Happy early Birthday! 😃

[@Hector-vx5yc]

I placed my order, Tim bless your heart my brother, strength and honor my friend be well!! 👍🏽💯❤️ from Washington state 🇺🇸

[@Smikebake]

Ordered 1 right when I saw this! Cant wait to try it out

[@TheWeaversofEternity]

Awesome, hope you like it! Let me know how it goes for you!

[@nauticalknotcraft]

Well thought out and executed. The price point is reasonable. Well done, thanks.

[@TheWeaversofEternity]

Thanks for checking it out!

[@PaulaNorthway-cp9jw]

Love mine! Thanks!

[@TheWeaversofEternity]

Glad you love it Paula, have fun and enjoy it! If you have some time and it's not too much of a hassle, feel free to leave a review on the paracord weavers website, we'd love to know what you think about it! 🙏

[@VIRIATO-7]

*REAAAALLY COOL !* 🤩

[@TheWeaversofEternity]

Glad you think so!

[@valor6000]

Thank you for the overview! Got one coming in the mail 💌

[@TheWeaversofEternity]

You're welcome, thanks so much for ordering one and I truly hope you enjoy using it!

[@adelbabi2998]

I like it

[@TheWeaversofEternity]

Glad you do!

[@timalbrecht2311]

BRO VERY NICE.

[@TheWeaversofEternity]

Glad you think so!

[@ZippedUpKitz]

One improvement it needs to make it a more perfect jig… it needs to be able to adjust the height of the top side angle instead of the "one size fits all” angle…. Other than that, you got yourself a great looking jig!

[@TheWeaversofEternity]

Great point Holly! I think the angle although not adjustable should be comfortable for most users. But yes, an adjustable angle system would be ideal. I'll have to pass that along to colleagues. Thanks for the suggestion!

[@ZippedUpKitz]

@@TheWeaversofEternity yeah for a lot of people it would be… the one i put together back in 2020, I made it to where i could change the angle using a 6 inch threaded bolt and a wing nut… with my spine being fused the way it is, a flat jig just killed my neck… so, I figured out a way to adjust it … I like your jig very much… its more stable… mine didn’t stay in place and slid around if I wasn't careful…

[@blindindianpeople2122]

The jig is AWESOME. Quick question: Are the notches on the black plate in metric or imperial spacing? Question because I live in Europe.

[@TheWeaversofEternity]

Great question! The notches are in imperial spacing 1 inch apart, so unfortunately they do not cater to metric use. To be honest, I myself rarely use the notches on the jig I use and I tend to just measure the bracelet with a measuring tape as buckles can vary in length. Knot and loop bracelets can affect that too of course. But that's just me, thank you for asking as I forgot to address that in the video!

[@ShinyNickelBlades]

I could use the XL for some of the longer projects I make. I can't right now, but the price isn't bad.

[@TheWeaversofEternity]

Hope you'll be able to check it out one day!

[@mindbonker]

what's the longest bracelet it will make

[@davidmcguinness9187]

Thanks for the video

[@TheWeaversofEternity]

You're welcome!

[@kikipanda1923]

delivery to France possible? price please tks

[@skipper4114]

What’s the best size paracord for making most of the items you make? Cheers.

[@TheWeaversofEternity]

A majority of the projects on this channel are done with 550 paracord. I personally feel that's the most versatile thickness, but people often go thinner if they want lighter weight projects. So it's really up to you.

[@skipper4114]

@@TheWeaversofEternity thank you for your reply. I might try to take this us as a hobby. May I ask where your located? Cheers from Canada.

[@ZippedUpKitz]

Cool Jig…

[@marks2840]

Wow what an awesome jig I saw it on the site a little while ago and was impressed then I'm saving for it lol . I hope the site has been doing well for you and your partners 😊

[@TheWeaversofEternity]

Hey thanks Mark! I hope you'll be able to check it out one day. Thank you for your consideration. We're doing well, but we hope to go bigger and better in the future!

[@K_Ham86]

Sweet design - one thing that has me on the fence though - on my past 3 jigs, I've had to put cm on myself as they only came with inches - on this, I see no units at all? 😮

[@TheWeaversofEternity]

Yeah, that was a bit of an oversight on this one. There are markings, but they are in imperial at 1 inch increments. I've suggested to my team that we perhaps start including a sticker that can be attached for both imperial and metric measurements.

[@K_Ham86]

@@TheWeaversofEternity That would be awesome. I'm cutting and taping measure-tapes to my jigs (a bit of a pet peeve for me since inches just doesn't work at all for my brain 😂)

[@dhruvgrover5878]

I noticed for one of the scenes you were wearing a Casio gshock ga 2100… I was wondering whether you had any opinions or experiences you had to share with it as I have been looking at it for a while.

[@TheWeaversofEternity]

I like that watch. It's a great no-nonsense option for day to day wear, active wear, or as a tool watch. It's quite rugged and durable so I'm not afraid of babying it if I'm doing any sort of manual or physical labor. The light on it is fine and the hands do have a bit of lume on them as well. But I do also have a GW-B5600 and I would take that one over the GA 2100 any day though.

[@michaelgutierrez6564]

I made a heavy duty version of Mr. Coops Jig. 2 pieces of 18mm baltic birch with a wide base at the corners similar to the speedy jig. A hardwood insert glued into the jig as the guide wide enough for that a metal tape measure and t-slot. Heavy duty picture hanger froma European company that do not bend.

[@TheWeaversofEternity]

Sounds like a great jig!

[@TheOlegLviv]

Hi there. Can you teach how to make Blackjack? Thanks in advance.

[@TheWeaversofEternity]

Yes.., I've made several monkey's fist "impact tools" that are much like blackjacks you can see them all here: kzbin.info/aero/PLVpANXnNebdN4MMi3ZrFaTC5PbiVjWzab Is there a specific type of blackjack you'd like to see though?

[@roel.vinckens]

I just found out I really need this. 🧐

[@roel.vinckens]

Will there be a European vendor? Shipping and taxes double the price for the moment...

[@TheWeaversofEternity]

Glad I could show it to you! Haha

[@daisyquispez.8909]

🤩

[@TheWeaversofEternity]

😃

[@cheerwhiner7829]

I use the “ouchless” hair bands when creating bracelets for former students of mine (I also will start using the silicone bracelets soon)- I use that as the core and then just knot on the band itself. The problem is, on the jig that I have, the “posts” can only get about 4” from one to the other- and sometimes this stretches the band out too much to fit a younger person. How close can they get on this jig? Could this jig be used for different types of thread- embroidery, rat rail, yarn, etc.? The design looks great, by the way. 👍 Later… I think I answered my own question with the horizontal bars you have on the jig… I could put any hair band or silicone bracelet on those bars and knot on them. How close can those two adjustable ends get from each other?

[@TheWeaversofEternity]

Thanks for the feedback and to answer your question, at their closest, about 5.25" or a hair over 13 cm for the Aztec buckle holders, but for the horizontal metal pins, about 2.5" or 6.35 cm.

[@cheerwhiner7829]

@@TheWeaversofEternity That sounds great- I will probably buy one then- the horizontal bar could be very useful. Thanks 👍

[@stephangrobler5524]

Very nice…. But two things: What about a monkey fist jig? Can the measurements also come in centimeters for us across the pond? A heavy jig with a stand is nice features.

[@TheWeaversofEternity]

We'll most likely be making updated monkey's fist jigs in the future, but I can't say for sure yet. I will talk to my team about having measurements in metric for future jigs as well. I'm going to suggest something like a metric ruled sticker that can be placed on the jig to add metric measurements.

[@stephangrobler5524]

Thanks. I will purchase an “updated” version that is at least metric engraved.

[@rosalindalozano233]

How to video coming?

[@TheWeaversofEternity]

Of course, if anything it will be used in future videos so you'll be able to see it in action.

[@ZippedUpKitz]

I knew I should have patented my angled jig I made a few years ago lol…. Dang it! 😂😂😂😂

[@TheWeaversofEternity]

Too late! 😂

[@ZippedUpKitz]

@@TheWeaversofEternity lol… well, mine was adjustable ROFL…. :)

[@Xubono]

Lol - that ain’t 45°. Looks more like 30°. Why not have cm marks on one side and inches on the other? Looks pretty good though.

[@TheWeaversofEternity]

Haha ok there geometry police! And yes, to be honest, metric should have been added to the jig markings. I will talk to my team about that for future jigs. Thanks for the suggestion!

[@BeeBalm001]

Dude! Why name it Apache? Are you Apache??? Really, Apache. Geez! Imperial Gig!

[@bikash1933]

Hey can u plz give me some paracord in giveaway...my parent's won't allow me to buy. I want to but i cant because i live on my parents money for now. Plz sir😢 u have so much i can see. Give me 10 ft atleast.