This is a must have if you have a Glock MOS

[@marcel-w7]

I was hunting another optic for my G 34-5 MOS and found a combo from C&H. So I bought the Holosun 509T plus the plate. Already have a Venom tightly secure with C&H plat. Forget Glock crap plates. Good luck to all.

[@takingaim7298]

Yeah man c and h plates is the way to go for sure. Thank for commenting.

[@Fathertime747]

C%H precision plate is much more secure than the factory plates. I had a problem with loosening of factory plates under heavy usage and a screw broke and had to have it drilled out. Switched to C&H plates and used Vibra-Tite and found it to be a much more secure way to mount my red dot sights.

[@takingaim7298]

Yeah man they are much better than mos plates. I just started using the vibratite and i think it best for guns

[@RidersRange]

Interesting! I haven’t had any problems, but I haven’t put more than 200 rounds through my G19 so far. I may have to look into the C&H. Thanks for sharing this.

[@takingaim7298]

you are welcome. I think i was about 300 to 400 ( i think ) when noticed my red not hitting and it was cause the screws were loose. I really like the C&H, check them out. Thanks for commenting buddy

[@robertteller6928]

I purchased a Holosun EPS for my Glock 19 G5 MOS. I called Holosun and they recommended only 2 plate manufacturers: C&H Precision and Calculated Kinetics. Both are bulletproof. The C&H sits lower because the plate is thinner than the Calculated Kinetics because of their patented way the Red Dot mounts. While the Glock factory plates work, it's like the factory tires that come on most vehicles - not made for high or hard performance!

[@trey_dizzle4161]

I just ordered a C&H Glock RMR mount and I'm hearing mixed things... Hopefully it's good

[@mattyb9350]

Great video... May I ask what magazine release you have there?

[@takingaim7298]

Zev mag release. They look awesome but i went back to polymer because of it damaging my mags. Now i use tango arms one

[@JohnWick-wm4pd]

Thank you for this video. I will definitely get this plate for my G17 MOS!!

[@takingaim7298]

Your welcome. You ll love it.

[@johnkosheluk1041]

I have the same gun get the holosun scs and you don't need a plate plus you can co witness with your sight

[@shepherd3716]

Nice Overwatch trigger bro. I'm glad I ran across your video here. Definitely going to invest in this plate when I get my RMRcc.

[@takingaim7298]

Thanks man. Yeah c&h Precision is awesome. Those plates are huge improvement , plus he backs anything he puts out. Overwatch triggers are my favorite. True Precision is putting out some great glock triggers too. I was looking at the rmrcc. Love Trijicon optics. Thanks again buddy

[@johnkaraphillis754]

I had to buy a plate for my ‘19 MOS Gen 5 in order to mount my RMR properly. I paid $17 for my Trijicon plate. Only 2 hundred rounds to date. $75 steep but I guess you get what you pay for.

[@w.r.ongjr9825]

Hey man! Is the extractor visible if you look into the right-side screw hole of the slide?

[@takingaim7298]

yes i do believe you can. Using the right size screws are super important. I had friend put screws that were a little long on his 43x mos and ir was a mess. Also have to be careful about using too much thread locker. It can get in the components and cause issues. Hope this helps

[@w.r.ongjr9825]

@@takingaim7298 yes I know its a problem with the 43x thats why Im asking if its the same with bigger models like the G19 MOS or G45 MOS :O

[@w.r.ongjr9825]

@@takingaim7298if you find the time to check it or make a video on it, it would be extremely helpful as a lot of people wonder this. I can repost your video on those glock forums

[@youngblood02busa]

Tried the glock plates on my 17mos for a holoson 507c the plate bent and was destroyed instantly idk why glock made that garbage cnh plate worked instantly and with no issues

[@takingaim7298]

yeah me neither. They should include better quality plates. I recently got a Shadow System MR920 Elite. Just a Glock gen 4 with lot of upgrades. They have a cool optic mounting system. and use no plates.

[@Don_Piscatella]

I probably shot less than a hundred rounds and my red dot became loose 🤦‍♂️ I bought this new plate you recommended.. hope it works on my glock 34 🙏🙌

[@takingaim7298]

Yeah man the C & H plate is awesome and looks so much cleaner. You ll be much happier with it

[@Don_Piscatella]

@@takingaim7298 how long did it take to get? I ordered it a couple days ago

[@takingaim7298]

@@Don_Piscatella right now it is kinda hit or miss. I get some stuff in 3 days , but some stuff will take almost 2 weeks ...crazy. I buy a lot off of tacswap and ar15,com. You have to pay attention to their feedback and only buy from people with good feedback

[@takingaim7298]

​@@Don_Piscatella lol i ended up stripping my screw trying to remove the oem plate. I was so mad. I had to drill it out but finally got it put on and been great ever since. I learned my lesson and bought a fat wrench. They re pretty cheap and you can put the right amount of torque. Hopefully u ll get lucky and get it by friday.

[@Don_Piscatella]

@@takingaim7298 yeah man hopefully I can get it Friday 👏

[@DerekEvan]

I am definitely getting that plate after watching your video. Thanks! What exact rmr are you running and backup sights?

[@takingaim7298]

Yeah man that plate is awesome. I m using a Trijicon type 2 rm06. It has a 3.25 moa . They are expensive but worth it. I have Dawson Precision blacked out irons on now. I use the 1/3 co witness. I like the blacked out sights cause they don't distant you when trying to get on target. If you are trying to get on your dot and u have a bright front sight your eye natural is pulled to bight things and i want to get on the dot as fast as i can. Hope this helps man and thank for the comment. Any other questions feel free to ask.

[@DerekEvan]

@@takingaim7298 thanks for the response. I’m leaning toward the ameriglow black front and rear sight. Also I want the rmr type 2 but what’s the difference in the rm03 vs rm06 vs rm09? Thanks for your input!

[@takingaim7298]

I believe the difference is the size of the dot. I like the RM06 , it has a 3.25 moa dot. It is about perfect i think for carrying because it is small enough for precise shots but still big enough to get on target fast. Also the RM06 has manual and auto brightness adjustment. Cool think about that is the dot brightness adjust automatically and you can still adjust if needed but mine is usually fine. The type 2 is the newest and i would get it. The type 1 wasn't made for a pistol but people started using them and it took off. The type 2 is made specifically for the pistol so the connection to the battery is better. It is just a better option in my opinion. I ve only been using dots for about 3 yrs and i think it is the future. It is almost like cheating lol. I just got a benelli m4 and will do a video on it soon. If u are new to dots i would recommend when u get it slowly practice punching it out on target and get faster as u find the dot easier. After some practice the dot will be where u want it to be without searching for it. Takes a little getting use to it but once u do you will be hooked. Lol sorry this so long. Hope this helps. Take my advice and don t skimp on ur dot. Most people that do regret it. Get you a Trijicon rm06 and you will LOVE it. It is what i consider a battle optic. If the crap hits the fan this is the optic u want.

[@DerekEvan]

@@takingaim7298 thanks for the detailed response. It is appreciated. I am getting the same one you have and definitely willing to spend the extra money and do it right. I’m going to get that same base plate too. Subscribed.

[@bobsagetbillboard1876]

Seems like C&H has gone down considerably in quality these days. Forward Controls and Radian might be the only 2 to go with now.

[@takingaim7298]

That is sad to hear. I haven't bought a plate from them in a little while, but they were making the best stuff then. Hope they get back on track. Competition out there now and that is good for us especially. I ll look into radian and foward controls. Thanks for commenting.

[@bobsagetbillboard1876]

@@takingaim7298 yeah have seen a few plates with very poor fitment issues and hardware failures. Has been reported a lot lately from what I have seen.

[@mauricegurley4903]

Did you have a link for that optics and plate?

[@takingaim7298]

chpws.com/product/v4-mil-leo-glock-mos-to-trijicon-rmr-holosun-407c-407c-v2-507c-507c-v2-508t-and-508t-v2

[@omarvazquez5149]

Nice setup. How about the defender plate. Which one serve better for EDC?

[@takingaim7298]

I think the mil/leo plate is best. It is metal and the defender is polymer. I haven t tried the defender but from the looks of it the mil/leo one like i have would be stronger. The one i have just gives u a much better lock up on the rmr. I ve fired many many rounds and hasn't loosened any. I m sure the defender works great i just think the leo/mil is awesome and so tough

[@gerardobarriera1968]

Get the MR920 and will have no issues

[@takingaim7298]

They are nice. I thought about one of those. Thanks bud

[@scottwallace7033]

The factory plate is awful i got 200 and maybe 10 or 11 rounds b4 it blew my optic off and hit my buddy in the face , tottaly sheard the screw heads off , this is a must to make the gun work , its just like glock sights it has to be replaced to be functional

[@urbantactical148]

That’s pretty interesting.

[@takingaim7298]

Yeah it makes a huge difference and well worth it.

[@stevesergeant5883]

I just wish they would make some specifically for the wider glocks...sure they fit but they look like shit