This Is How To Get The BEST Sound Out of a V6 Mustang!

These two mods DRASTICALLY changed the sound coming from my naturally aspirated Mustang! Honestly was an inexpensive and fun little mod to do! If you feel your Mustang is missing that little something, THIS... IS... IT!!
#fordmustang#mustang#exhaust
📽: IPhone 11/ GOPRO HERO 7 / Sony ZV-1
SOCIAL MEDIA:
1) Instagram📸: instagram.com/
looggaannn?igshid=1c4shh8uel1oi
2) TIK TOK🎥: vm.tiktok.com/ZMetpUXMa/
Music🎵: Personal
DISCLAIMER** (This video is for learning/entertainment purposes only. I Logan S, are not responsible/ liable for any loss, injury, damages or actions taken on the users behalf. This video including past, present, and future are through my OWN experiences and I am extending it to give an individual a boost of assistance towards any questions or ideas for watching the video(s). No information contained in this video shall create any expressed or implied guarantee/promise of any particular result. Do at your own risk!)
* LIKE AND SUBSCRIBE!👍
* LEAVE A COMMENT DOWN BELOW!
* SHARE THIS VIDEO!📩
* 🚨TURN ON POST NOTIFICATIONS🚨
MODS:
BMR A-Arm Brace
Front RTR SwayBar
UMI Panhard bar
UMI rear lower control arms
SR Performance Rear Strut Tower Brace
BMR Rear Panhard Bar Brace
Megan racing front strut tower brace
MIRO 111's 20in rims all around 275/30/20 rear, 245/35/20 front
Gt500 spoiler
Rear Decklid "shaved"
Carbon Fiber License plate surround
Carbon Gurney flap
Custom rear diffuser
LED front and rear side marker lights
Custom designed taillights
Rear decklid emblem painted black
Rear carbon reflectors
Lower rear bumper Plasti dipped
Carbon gurney flap
Shorty antenna
Rear window spoiler painted Oxford white
Winndow rain guards
Calipers painted red
Rear Sway bar painted red
Raceland Coilovers
Spiked lugs
Spike valve stem
R1 Concepts slotted rotors all around with ceramic brake pads
Custom side skirts
Roush front lip painted Oxford white with dress up hardware all around
Custom front splitter with rods
Gt500 Upper grille
Custom lower grille
Custom LED fog lights
Custom white mud laps (for looks; no purpose really)
White LED front turn signal lights
Euro tail lights
INTERIOR:
Carbon dash
Carbon shifter
Carbon seat belt cover
Rear seat carbon panels
Carbon headlight switch cover
Carbon door handle covers
Carbon accents all along the doors
Door locks are bullet shells painted black
Dash and center console painted white with black accents (deleted chrome)
LED lights around dash
Lights under dash near foot area
Bride seat belt covers
Phoenix Auto 12in touch screen
Amazon Race seats
Euro (clear) LED Taillights
ENGINE:
Diablo i3 91 Octane tune
HPS/K&N Cold air intake
Engine components painted some
Flow master muffler w/chrome tips
Ebay shorty Headers
Ebay throttle body spacer
Pedal Commander
Custom H-Pipe
SpedLab Exhaust Cutouts

[@LoganScott.]

Throttle body spacer: www.ebay.com/itm/133392048428?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=RfCvvYIsTzC&sssrc=2349624&ssuid=i1Ze1uNaQGO&var=&widget_ver=artemis&media=COPY

[@mimimorlan]

Great video man! Definitely going to give the throttle body spacer a try. Sounds really good!

[@taylorrussell5490]

The first couple mods I did to mine was a cold air intake and throttle body spacer and exhaust and I was absolutely shook by how much I loved that sound

[@LoganScott.]

The induction noise sounds great and can be better!

[@nicholasbonfiglio820]

did the throttle body spacer make any noticable power gain?

[@nimrodpaul6875]

​@nicholasbonfiglio820 I'd like to knowto, I have an 06 v6 speed im just starting to play with. I got a whiteline front and rear swaybar kit with heavy duty links im about to install. 359 bucks from a fab shop in NC, I couldn't believe it, it's 570 elsewhere.

[@nicholasbonfiglio820]

@@nimrodpaul6875 what fab shop i’m in NC to

[@deanfidler9532]

One mod I did that really made the intake whistle louder was a 5.0 v8 throttle body swap. It’s not a common mod but it’s an 80 mm tb compared to the stock v6 throttle body’s at 65 mm. The opening of the intake manifold is 73 mm which bbk makes the correct diameter tb but costs over $400. I bought a used 5.0 tb for $60, polished it up, and bought a $130 adapter plate as for the bolt patterns on the tb’s are different. I did have to buy a larger coupler to attach the tb to my cold air intake which everything equates to $200 and for the same results as a BBk tb

[@LoganScott.]

That was actually really useful! There’s a possibility I hit you up if I go this route. Thanks brotha! 💯

[@deanfidler9532]

@@LoganScott. and I forgot to mention the adapter plate is on AMR’s website but I think American muscle is now carrying them

[@UNDERSTRICTOBSERVENCE]

Yeah I was looking to upgrade too but that BBk 70mm for 350 be crazy. V8 throttle swamp? Your a genuis bro❤

[@deanfidler9532]

Another thing with the v8 TB, you have ti cut the fins in the intake manifold behind the tb or the plate will hit them at wot but other than that you don’t even need a tune to make it work but it’s recommended of course

[@nimrodpaul6875]

Did you notice any performance difference? Great share man!

[@MurdaMike83]

The Mustang sounds clean and looks amazing. Thanks for your help. I’m thinking about getting one. 🔥

[@LoganScott.]

Definitely a fun car! Needs a few thousand dollars to make it amazing!

[@atb1325]

Ford put a lot of effort into the cold air intake that came stock on these cars. An Airaid intake tube from the existing box with a high flow air filter worked well for me. It gets rid of that cheesy looking plastic, weird looking thing between the air intake and the throttle body that comes stock. Shorty headers and Borla S type axel backs make these 3.7's sound really good. MPT 93 octane tune is a nice upgrade too. You have a nice car man, enjoy it! I love my 2013.

[@LoganScott.]

The CAI works well for these cars stock or not. I’ve found that if the aftermarket one acts very similar to the OEM one without a proper tune, you’re more than likely spending money to have the sound. With a tune on the other hand I’ve found helps a little. Haven’t put it on a dyno to truly know though. Just the but dyno

[@feellnfroggy]

Paper filter flows more than enough, but why did I never think of this. Stock air box and aftermarket tube, great idea.

[@codyfoster8730]

I was just about to comment this as well all I did is get a AidRaid tube and a conal reusable filter from American Muscle. The stock box blocks out all the warm air from the engine bay and has a fresh air duct coming right from the right side of the grill into the closed box. Now I understand why people think the after market CAI sounds better is because it's open and you can hear the air sucking in but it's sucking in the warm air of the engine bay instead of getting that air being rushed in from the stock box of the of air filter box. If u want sound go ahead n buy a CAI. If u want function keep the OG box get a AirRaid tube and a reusable filter. I would recommend a dry 1 tho. Some times a oiled filter can suck some of that oil in and mess up things like the MAF sensor and bake the oil on the sensor n cause it to mis read and throw light. They do make dry reusable filters on American Muscle or CJ pony parts

[@atb1325]

@@codyfoster8730 Yep! Those after market cold air intakes are a joke. The stock box with the AirRaid tube and high flow filter is the way to go.

[@atb1325]

I have a 2013 race red with the premium and performance packages. It is a great car! I bought it 5 and a half years ago with just over 30,000 miles on it. It only has 59,000 on it now as it is not a daily driver. It has been a fun car to drive on weekends and trips. The performance package really makes the car ride well. The GT springs, struts and front shock tower brace keep body roll at a minimum. The 19 inch wider wheels and bigger brake calipers really make driving it fun. The manual trans and the 3:31gears are nice also.😎

[@sonsoftheedelweiss72]

Great video. Just purchased a 2004 v6 for my son for graduation. Cheaper insurance for a teenager. Need to learn ! Thk u

[@LoganScott.]

That’s awesome! Congrats to your son! 🥳🎓

[@user-st9yg2rb9p]

Sounds great

[@MeAndCarKeys]

Car sounds amazing bro! The exhaust and the intake!!! Great video!

[@LoganScott.]

You’re awesome bro, thank you!

[@mimimorlan]

I wonder if it’ll work on my 3.7 explorer lol. Gotta give it a try. I hope so. Really nice sounding mustang BTW. Very underestimated.

[@LoganScott.]

I wouldn’t see why it couldn’t! Def give it a try and thanks Mimi! Appreciate you watching 🖤

[@AdamRyan747.]

Just purchased 07 trying to get a better understanding of these mods. Very informative.

[@LoganScott.]

Enjoy 🤟

[@markkram9940]

07, totally different v6 to this one, your 4.0 is much harder to tune.

[@AdamRyan747.]

@@markkram9940 okay thanks

[@im.gonnatouchyou]

been watching your videos, just got the throttle body spacer and just painted my interoior. i LOVE it, these vids are helpful

[@LoganScott.]

That makes me so happy to hear Will! I personally LOVE the throttle body spacer as well mainly for its obnoxious whistle. Appreciate you watching my man and looking forward to hearing from you in future videos! 🫶

[@whitefang9070]

Hey Logan! I really enjoy what you have done to your mustang and hope I can do the same with mine! Did you change the throttle body itself or kept the stock one?

[@LoganScott.]

Thanks brotha! I appreciate you watching! The throttle body is stock and don’t plan on swapping it. Personally not sure if the price is worth the return. I could be wrong 🤷🏼‍♂️

[@bridgerbateman1179]

thanks boss! i’m going to be making this purchase soon!

[@LoganScott.]

Def will put a smile on your face

[@bridgerbateman1179]

sweet! what intake are you running?

[@LoganScott.]

HPS as well as a K&N air filter. All came together on Autoanything.com

[@bridgerbateman1179]

thanks!!

[@nimrodpaul6875]

Great video, subbed, i have an 06 v6 5speed which makes it a bit more fun. Considering a cai and bama tuner. Already have the front n rear whitelins swaybar kit and heavy duty links but not installed yet. Is there a cai youd recomend and are they noticable for any performane gain ( with and without a tune)? Any help appreciated, im brand new to v6 world and electronics,, 1970 small blocks i know lol.

[@LoganScott.]

Thanks Paul! That makes me soooo stoked you have a few suspension components! It’s extremely underrated and so worth the money. No matter if you have a 4, 6, or 8 cylinder, you can never go wrong with suspension. On a side note, I would definitely look into a tune for your V6 if you plan on keeping it for a while. It wakes up the car and paired with a pedal commander (kzbin.info/www/bejne/e2KXe3uBaNKGba8) realllyyyy helps with that sticky ass throttle. Night and day difference. The CAI honestly didn’t do much other than put a smile on my face. Made a slightly deeper tone in the exhaust, added some induction noise and on top of that gave a slight (and I mean slight) boost in lower end torque tested on my butt dyno. I noticed the change when paired with the tune. You’ll honestly be wasting your money if you buy it with no tune. Made no difference if you had the factory air box in or not in my opinion.

[@nimrodpaul6875]

@LoganScott. thanks for reply man, watched the vid in link, chirps rubber all day , im considering a jlt or bbk cai with a Bama tuner,,, either way it's around 700 for both. I think it'll drive nice when I get the whiteline package installed. I'm going look into the pedalcommander, never heard of it. Thanks

[@sonsoftheedelweiss72]

What Does the strut tower brace help with? Thk u . Have subscribed.

[@LoganScott.]

From what I’ve noticed, it really helped with body roll and better turning response. The front strut tower brace made the most noticeable difference (by itself) while with a rear brace, along with the front brace, really tied the car together really well to help eliminate the swaying and side to side movement of the car. Felt more planted to the pavement Thank you thank you 🤙🏼🤙🏼

[@Sorullo23]

Hey Logan. Im new to this car modification thing and I got a question. Did you tune your car after putting the cold air intake, exhaust system and other stuff?

[@LoganScott.]

I tuned the car after adding the “hot” air intake and before adding the rest of the exhaust modifications.

[@williamoliveros76]

Your custom h pipe, is it done by a shop or did you buy a lethal performance catless h pipe and kept the cats? Because i want to do that but i don’t want it sounding wonky if done wrong

[@LoganScott.]

I have a video dedicated to it! I had mine done at a shop and it was a great investment in my opinion. I have other videos as well where you can hear it with a muffler or muffler delete This H-Pipe is AMAZING For V6 Mustang Owners! kzbin.info/www/bejne/pJy1e6JqZqyLpMk V6 Mustang Owners Will LOVE or HATE This Exhaust! kzbin.info/www/bejne/f3y1dameiLKMr7s

[@warpony5654]

The mods I did on my 4.0 V6 is cai, complete cat back exhaust mid x pipes and highflow cats, tune , transmission tune,. suspension mods and 100 shot Nitrous with a dual purge system.

[@LoganScott.]

Soooo happy to hear you have suspension to backup this power plant of yours 💪. Keep up the great work my man!

[@darkfalconsteele170]

Question. Did you ever get a tune to match the cold air intake? Bama, MPT, etc..

[@LoganScott.]

Yes, Diablo I3

[@ripplays842]

Put the mafia turbo kit on that v6 u be gapping hella chargers and challengers look up how good that set up is 550 hp

[@LoganScott.]

I’ve looked into it before and I think they have amazing kits! Putting the V6 on the map! 🗺️

[@GOPACKERSJT]

Unless your upper intake manifold is ported, that thing is not spinning any air, it literally just takes performance away. Any open box type intake will give you that sound. The car does sound pretty good though!

[@LoganScott.]

If I did lose any performance, I haven’t noticed cause the car is slow af anyway haha. Thank you!

[@nimrodpaul6875]

​@@LoganScott.Lol, my 06 v6 is to,, the 5 speed helps my testosterone a little bit lol

[@rokees5507]

I see you have a shorty headers! My question dose headers change the sound or make louder and nicer

[@LoganScott.]

Helps take away the rasp and gives a slightly deeper tone. Definitely notice it at lower RPM’s and cold starts. As for it being loud, not much of a difference tbh

[@bgi1195]

Yo logan have you or anyone know if you’ve been pulled over for the front while led side markers like the ones that come stock yellow I have some organge leds rn but I want to change them to white leds

[@LoganScott.]

Not a single issue. In the state of Nevada, drivers are allowed to have white or amber lights in the front of their car. I even have my blinkers set to white

[@AntChiulli-Chiulli_RS]

I was thinking about getting a bigger throttle body for my v6 camaro it’s the LGX engine not the LFX. I was curious on how the k&n air intake and the Edlebroc 1.7L supercharger would bolt up, what would I have to do to make this work?

[@LoganScott.]

Wish I could help but I would be lying if I told you I knew my friend 🤷🏼‍♂️.

[@Seaster80]

got one on mine sounds fantastic paired with the cai

[@LoganScott.]

Agreed!

[@Seaster80]

@@LoganScott. I call it the poor man’s whipple

[@LoganScott.]

I can’t argue that 😂

[@nimrodpaul6875]

Did you notice any performance gain?

[@mnemonicabyss]

K&N intake, laced with HPS stickers. Shocked I didn't see a shelby emblem/badge somewhere.

[@LoganScott.]

Cause it’s not a Shelby? 😂

[@gavinnn7762]

Was the top mount just a addon or was this engine swapped? Cuz mines dont have that

[@LoganScott.]

The brace? Aftermarket. Some models came with them but mine didn’t either

[@MarvFitBikesKicks]

Can I apply these mods to my 2011 ford edge spot since we have the same engine?

[@LoganScott.]

If it has the same engine, I wouldn’t see why not? Although, there’s a chance you might run into fitment issues. I’m not entirely sure the layout of the 2011 edge and don’t want to give you the wrong info. Just my opinion.

[@sonsoftheedelweiss72]

Did you put the cold intake on yourself or took it somewhere? Where do you purchase your parts?

[@LoganScott.]

I installed it myself and purchased the CAI on AutoAnything.com a few years ago

[@CG-jt9th]

@@LoganScott. do you have a video of install? If so, would you consider uploading please!

[@rhysbk8272]

@@CG-jt9th if you shop on American muscle pretty much every intake you can buy has a video on how to install, they aren’t every difficult to install either at most you need is a socket set, a flat head screw driver and some Allen keys

[@yellowfits9200]

Como de bien filtra las partículas ese filtro de cono ? Es seguro o acorta la vida del motor

[@LoganScott.]

I couldn’t tell you to be honest. I got it because it sounded good 🤣. I haven’t noticed a difference in poor engine performamce

[@iTzEric23]

Should have someone record you doing a fly by

[@LoganScott.]

I would love that!

[@user-rz9ke2fu6l]

would this be too loud if i put the exhaust, throttle body spaced, and a bbk cold air intake? what type of exhaust did you use as well? great sound!

[@LoganScott.]

Stock exhaust pipe from the cat all the way back with the exception of the H-pipe. Car is not overly loud but can get loud when you want it too haha. You might notice a slight change in exhaust tone because I have shorty headers. Not sure if you do as well.

[@user-rz9ke2fu6l]

@@LoganScott. haha nope not yet, im not 16 yet and have my car already, got a 2000 v6 mustang, i love it and want to make it sound good without sinking a bunch of money it, while adding more power. what i have planned as of now is flowmaster force 2 exhaust, bbk cold air intake, and now the throttle body spacer after seeing this vid. but don’t really want to replace the headers quite yet, cause i don’t want to pay for the tune, and i don’t think i would need a tune for the exhaust, intake, and spacer would i?

[@user-rz9ke2fu6l]

@@LoganScott. mine is also bone stock and has the stock y pipe

[@user-rz9ke2fu6l]

@@LoganScott. do you think mine would sound similar or at least sound good? i love the sound of this mustang. sorry i’m kinda new to this stuff still 😂

[@canceledpublicaccessproduc1167]

@@user-rz9ke2fu6l the little v-6in that new edge only makes 190 at the crank. Truthfully I’d you can’t afford a gt get a 4.6 v8 from a crown Vic or something else that little six is a money pit and no horse power potential. I had one just for the body built a v8 drag car out of it. Also if you do keep it make it a true dual exhaust it helps the sound on these so much

[@carlospena9713]

Love it Man ! What’s exhaust setup do you have ?

[@LoganScott.]

Thanks Carlos! I have a video dedicated to that right here: kzbin.info/www/bejne/f3y1dameiLKMr7s

[@nightmare3.7cyclone24]

get a 93 mpt tune also bret barber ported intakes air flow solutions is his company are u in missouri?

[@LoganScott.]

I’ve had a lot of people recommend MPT! As of now, focusing mainly on full suspension before jumping into the heart. I’m in Vegas!

[@jdel3113]

Love ur chin lip bro..where did you get it?

[@LoganScott.]

Thanks brotha man! It’s all custom with the exception of the Roush front lip I got off American muscle

[@leeannabolton2961]

I have a two thousand four mustang 3.8liter v6 Automatic I'm on a top budget I am handicapped so I have to be on a really really. Short budget what do you think I should do

[@LoganScott.]

I have the PERFECT videos for you Leeanna! These mods may not be exact but can be used on a variety of applications. Enjoy! MOST Affordable Mustang Mods Under $25!!! kzbin.info/www/bejne/bXrdhJxsfNClZrs The Most BUDGET FRIENDLY Mustang Mods! kzbin.info/www/bejne/g4qzc6CGpLCcpc0

[@jaywardjulian6163]

May i have the link for the cold air intake thank you and great video

[@LoganScott.]

I don’t have the link but I purchased it from AutoAnything.com

[@jaywardjulian6163]

Thank you

[@bluedinero3055]

Basically gotta do everything I did to my '04 to my '14 😭

[@LoganScott.]

Haha

[@toonzwithzues8196]

I keep hearing that a cold air intake is not recommended for me since I live in Phoenix,AZ with 120° temps and how that could seize my engine?? Would I stick with a regular performance filter ?

[@LoganScott.]

I live in Vegas and it gets just as hot out here as it does in Arizona. Cold air intakes aren’t really the most ideal way to increase horsepower unless you have a tune that’s paired along with it. If you don’t plan on getting a tune, I personally think keeping the factory intake and filter is the best thing you can do to save money. I never heard of an engine seizing from a CAI but what I will say is do you homework and ensure it’s made for your car before you buy anything. Don’t cheap out. Hope that helps

[@bradensullivan1032]

Hey man I got the same car but mine is a 14 what radio set up do you have?

[@LoganScott.]

Hey Braden, here’s a video I created a while back that goes more into depth about the radio. 🎥: kzbin.info/www/bejne/Y2mxpXeheNmLj9U

[@Meegz29]

Which flowmaster mufflers do you have?

[@LoganScott.]

I don’t remember at the top of my head but I can find out!

[@denisejohnson4968]

What's the name brand for the exhaust, is it a cat back or axle back, thx

[@LoganScott.]

The axle back is from Flowmaster. I think it’s the FX series, but I could be wrong. Not the biggest fan of it but it does well with shorties, cats, and an h-pipe

[@Matzuhhh]

How much did it cost you? For the parts and installing them

[@LoganScott.]

What’s up my guy! Here’s a video I made that blueprints how much I’ve spent on EVERYTHING! 🎥: Cannot BELIEVE I Spent this Much on my V6 Mustang! kzbin.info/www/bejne/goDLopeQaaZoprM

[@jeffcallahan4213]

Which exhaust do you have I have a 2004 V6 3.9

[@LoganScott.]

Hey Jeff! Here is a playlist that provides a variety of videos presenting my exhaust set up. 🎥: Performance Upgrades kzbin.info/aero/PLWAngnnD9yDHv8iq-aXkMP9S9XuDw0x7B

[@Shaggy_0213]

What exhaust do you have on the car? Just a muffler delete? Any X pipe?

[@LoganScott.]

There’s a Flowmaster muffler on the car (don’t remember what model). Along with it are exhaust cutouts, shorty headers and a custom H-pipe with cats. If you would like to see more exhaust videos, I have them listed in the “performance” playlist 👍

[@Shaggy_0213]

@@LoganScott. thank you for being on top of your comments even after months of the video

[@LoganScott.]

Thank you for reaching out my man! Love interacting with everyone! 🖤

[@aidan7163]

Hey sounds kinda like my v6 mustang😆

[@LoganScott.]

Ironic right? 🤣

[@jonnyleyva6119]

What exhaust do you have is it a cat back ?

[@LoganScott.]

It’s Micky Mouse together my brotha 🤣 I have more than one part integrated on this exhaust system. Check out my playlist for more in depth details 🤟 🎥: Performance Upgrades kzbin.info/aero/PLWAngnnD9yDHv8iq-aXkMP9S9XuDw0x7B

[@johnaldrich124]

I have a 2013 v6 base mustang... it looks great and runs well but it ...don't sound like a mustang..it's really quiet....I got it from carvana in July of last year....it's just quiet?.. I guess that bothers me

[@LoganScott.]

My man, here are a few videos, I created, to help you determine what setup is best for you! You may like it or you may not. Although, this will help you narrow down what sounds good and what doesn’t for you. V6 Mustang Owners Will LOVE or HATE This Exhaust! kzbin.info/www/bejne/f3y1dameiLKMr7s This V6 Mustang with Exhaust Cutouts Sounds NUTS!!! kzbin.info/www/bejne/nXKtmXuCbJ5lmsU Every V6 Mustang Owner NEEDS this Exhaust! kzbin.info/www/bejne/pJy1e6JqZqyLpMk Took a BIG Risk Buying This For My Car! kzbin.info/www/bejne/pni4oZSaZcaUpJI

[@user-vk4dj8sw6g]

How did you make your exhaust sound like that

[@LoganScott.]

Shorty headers, H-pipe and exhaust cutouts/mufflers

[@danj7112]

What cat backs or what exhaust is it

[@LoganScott.]

Flowmaster muffler (forgot the type) and exhaust cutouts for SPELAB

[@ryanhamilton9709]

Lol yeah that's bad ass sound lol 😅

[@LoganScott.]

I like to think so

[@zylerjones1784]

What exhaust do you have

[@LoganScott.]

Flowmaster

[@quintinalowe3583]

Where did you get the decklid

[@LoganScott.]

I bought it off CJ pony parts, but I wouldn’t recommend it. Reason is because mine came wrapped and I didn’t notice till it was too late to return it. Not saying they’ll all be that way, but I pulled the lucky card on this one :/ kzbin.info/www/bejne/nKi0XqOVq5aFl80si=RtgshZqwxal4aWDD

[@LRBGamingYT]

Is this 2012? Model or?

[@LoganScott.]

2014

[@graysonfamilykennel5211]

What Tune do you have???

[@LoganScott.]

Diablo sport

[@user-vk4dj8sw6g]

Is it straight piped ?

[@LoganScott.]

🐈’s

[@mynameisntjeff906]

Stock throttle body?

[@LoganScott.]

Yes!

[@ytgamernl1073]

Really nice sound indeed i just bought a 1996 sn95 v6 mustang already got an cold air intake but i think the sound can be better.

[@LoganScott.]

Lots of room for improvement! Once you start, you won’t wanna stop haha

[@Meegz29]

Can't find the throttle body spacer for $50.

[@LoganScott.]

There are a few on eBay from multiple sellers that are similar

[@autotrimmers6353]

Any clip of the outside

[@LoganScott.]

Driving by? Unfortunately not yet

[@way2smooth145]

Where you buy your side skirts

[@LoganScott.]

They’re custom!

[@trentongray1818]

Why not just get a larger throttle body instead of a spacer? That way you get the power and the sound.

[@LoganScott.]

Only thing I could afford at the time. Never really committed on making this a power house either

[@zacharylafata5142]

Keep it stock. That is the best way.

[@LoganScott.]

Ew

[@poklianon]

And now mustang comes with an i4 ecoboost

[@LoganScott.]

I’ve heard negative things about it but I want to experience it for myself. Honestly wanted one at one point because of the turbo

[@guynoir4733]

I'm glad for everyone that enjoys the V6 but I just think the quieter the better so I don't have to hear that giant farting sound .

[@LoganScott.]

Fair enough 🤣

[@guynoir4733]

@@LoganScott. But I do admit that a 3.7 with a turbo is pretty potent and makes a great sleeper which is my favorite type of daily driver . There's just something about a stock looking and sounding V6 Mustang that eats Camaro SS's for lunch that I love .

[@rjdavis7503]

I have to hear that farting sound from my wife, she hasn't been modified,... I don't think she has anyway.

[@kyletree713]

I dont care about the look right now im just trying to get it to yell at people as i drive by 😅

[@robertwilliams9740]

Sounds like you're down 2 cylinders

[@LoganScott.]

After a whole year of driving, I can confirm that’s not the case lol

[@28Horsepower]

Hot air intake

[@LoganScott.]

😂

[@johnmcmullen456]

Unlike some CAI systems, the Air Raid model for my 2014 V6 actually retains the factory lower duct work to feed outside air to the filter, and closing the hood seals off the unit from the engine compartment heat.

[@jonathonhicks2369]

Needs a tune

[@LoganScott.]

Diablo I3 91 octane 😉

[@Dr.Mcstaby]

If these idiots wouldn't charge around $300 for a pipe and a filter it would be tempting to put an intake on my 4.0.

[@LoganScott.]

$300 is absurd…For that price, you can get so many other useful mods that will actually make a difference other than sound

[@Dr.Mcstaby]

@@LoganScott. I spent $400 on an entire engine rebuild kit for my 4.0 was gunna get a cold air intake but that's the average price of ebay cold air intakes ( between 200 and 300) which is dumb cause a piece of PVC with a hole cut in it for the mass air sensor and an aftermarket round filter do the job for like $50. worse is the clutch kits prices I don't get how ford made more v6's than 8's yet the parts for the 6 are nearly double the price of the 8 for some parts.

[@jeromejohnson1954]

creepy

[@LoganScott.]

👻

[@hockeyplayr97]

Wheres the badass sound?

[@winnerwolf9546]

Car sounds awesome ill never do it heres why 1- Mustangs are ticket magnets why wake up Barney Fife 2- where i live they are installing db sound cameras soon they will be all over .... at 800 bucks a pop why pay Barneys salary 3- my 4.0 stock Burns rubber i can pretty much stock beat anything 3.0 or less on the road in a quartermile stock i can run pretty close to GTs 4- this is why I keep my Harley Stock pipes and Mustang Stock Less tickets equals lower insurance and less chance of theft Equals more money in my pocket and as time goes by with ALL mustangs reach the 25 year mark car goes up in value especially if its Stock But hey, i was young once, too. im not bashing you or the car this is America, sort of, except these days, loud motors are not, shall i say, politically correct 😢 With the money i save, I'll get me a boat soon ....

[@Bluedino6996]

Throttle body spacer 🤣🤣🤣🤣 seriously? It's 2023

[@LoganScott.]

Next year is 2024 and I’ll still have it on. Sounds sick! 🤟

[@Bluedino6996]

@@LoganScott. show me proof it isn't something else that was changed in the intake system and maybe I'll apologize.

[@LoganScott.]

Nothing was changed and no need to apologize Blue! Only thing that wasn’t included in the video (from what I can remember) is the inside end of the intake manifold was shaved smooth. I don’t believe it made any difference to the sound or performance of the car though. Just an experiment I wanted to try. With the exception of the intake, throttle body spacer, tune and a slightly modified exhaust system, everything is OEM.

[@americanosbadassius9292]

It doesn't sound badass. You should have used the money you spent on mods, combined with the money you could get from selling your V6, and just bought a V8 😂 At least you're driving American.

[@LoganScott.]

I’m happy with my decision and have no regrets doing it. Enjoying it for it is.

[@americanosbadassius9292]

@@LoganScott. That's all that really matters, broski, you're the one that's got to live with it! Your under engine setup looks tight, as does the car! Respect that you stand by your work!

[@LoganScott.]

All love my guy 🤝🖤 Thank you for watching and looking forward to seeing you again!

[@mwh82108]

lmao!!!

[@coolboy4555able]

I had bought a red one off eBay and it made my car not start so imma give this one a try 🫡

[@LoganScott.]

That’s strange. Mine seem to run slightly better

[@veezybee23]

Enjoying your videos . Your Stang is clean ! On a side note the intake flows into the engine not out. So the filter takes the air into the throttle body and spacer and into the intake manifold. Great content! I’m subscribed.

[@LoganScott.]

@@veezybee23 All love Veldee! I have a hard time describing things in videos sometimes (for whatever reason that is) but I def agree with you.