This is How to Remove Vocals and Make Stems From Any Song! UVR Vocal Remover!

[@BradDollar]

*Want to remove reverb from your vocals? Check out this video I made on how to do it with UVR!* kzbin.info/www/bejne/b3PNkJV5pshojbs

[@KeatonKilmer]

that's wild this thing is free. thanks for the vid

[@BradDollar]

Right?! Thank you for being here and watching.

[@deoananas4745]

nice work man, good job.

[@BradDollar]

Appreciate you! Thank you for being here and watching.

[@pabloloiseau6619]

thx !! it works !!!

[@BradDollar]

Hell yea! Let's go! Good work. Thanks for being here!

[@theznooker]

how do you know if this Ultimate Vocal Remover .exe does not have virus binded to it?

[@BradDollar]

Hi! As long as you’re downloading directly from ultimatevocalremover.com there shouldn’t be any issues. It’s worth noting I’m on Mac, but there’s nothing suspicious about the UVR files or downloads. I bet there is a tool you can use to scan the file though. I hope you try it! This thing is super helpful.

[@carrastealth]

Is there a way to separate multiple vocal tracks? Like if two people are singing together, harmonizing or speaking, that would make it so you'd have the individual tracks for their specific vocals?

[@BradDollar]

Hey there! There is actually! It's not super perfect, but it can definitely separate out lead vocals from backing vocals. There's a "Vocal Splitter" option in the main menu you can play with and it works with the UVR-MDX-NET model. Hope this helps! Let me know how it goes. Thank you so much for watching!

[@seigiknight7959]

hi, do you know which model can be used to extract individual vocals in a song with multiple vocalist doing harmony ?

[@BradDollar]

Hey! Yea! Try UVR-MDX-NET-Karaoke 1 and 2. Once you get them from the download center, go to additional settings > vocal splitter options > click "enable vocal split mode" > pick the model from the drop down. Each one will give you varying levels of positive success / refinement. Also, the model I used in the video InstHQ-3 does a great all around job too. Let me know if that works and if you need any other help at all! Thank you for watching!

[@HishamTawfik]

Bro Can I remove the singer's voice mixed with the choir's voice?

[@BradDollar]

What up man! Great question! I'm pretty sure that will work. It won't subdivide the choir into sections, but it will give you a lead vocal and the choir as backing vocals. You'll have to play with it a bit and I might experiment with different models (they're all free), but it'll work. I just did a quickie on a Kirk Franklin song and it worked.

[@HishamTawfik]

@@BradDollar thank u bro for ur time I have one last question 🙏🏻🙏🏻 Is it also possible to separate the voices of two singers singing at the same moment?

[@BradDollar-qr1vy]

@@HishamTawfikall questions are welcome! Something like a duet might be a little tricky but it would definitely be worth trying.

[@NestorVass]

can you do stem separation with this?

[@BradDollar]

Great question! You sure can. There's an MDX model in their download center called KuieLab. That you can run on your track to get vocals, drums, bass and guitars/keys. Totally free as well! Thank you so much for watching and being here! Hope this helps.

[@NestorVass]

@@BradDollar Thanks for the info, I'll try it. I have to do a sample solo from a transcription and wanted to use the original track

[@BradDollar]

Oh yea this should definitely work on that.

[@tromick]

Were you able to do it with one click? My first tool was StemPlayer but since the crack does not work, I have tried to use one of the songs I have splitted with StemPlayer on Spleeter, AudioLab Spleeter and I have found some faults on them. The seperation quality is not like Stem Player. UVR is a great program but still can not find to seperate them with one click.

[@NestorVass]

@@tromick results were abit mixed so I ended up scratching it. But the mix was very busy and the sax and piano have similar transients

[@steezymiyagi]

I'm sad that it doesn't work for the MacBook M3 chip at least not on my M3 Max :/

[@BradDollar]

Dang that is a bummer! Really good to know though, thanks. I bet it will catch up soon. It seems like their team updates it frequently. Also, just in case, make sure you turn off "GPU Conversion." That also doesn't work with my Mac (M1). I hope this helps! Thank you for watching.

[@koushiknayak1576]

How to do stem separation and import to logic pro ?

[@BradDollar]

Hey thank you for watching! There's an MDX-net model set available that you can use to extract what you want. Under download center, look for the ones below. Then you run the program, it will spit out the files and you can bring them right into Logic: MDX-Net Model: kuielab a vocals MDX-Net Model: kuielab_a_other MDX-Net Model: kuielab a bass MDX-Net Model: kuielab a drums MDX-Net Model: kuielab_ b vocals MDX-Net Model: kuielab_b_other MDX-Net Model: kuielab_b_bass MDX-Net Model: kuielab_b_drums

[@ags5]

How can I remove dog bark sound from vocal in UVR ?

[@BradDollar]

Hi there! I think your best bet might be something like Izotope RX. You can split files apart with UVR, but it's really hard to take individual elements out of the stems that have already been separated. There are a few free models they have in their download center that might work though (VR Architecture Single Model or MDX MDX23c). It's free so it might be worth a shot. Hope this helps! And thank you a ton for watching!

[@ags5]

Thank you for reply fast, I tried both model now and yes it's not remove barking part from already separated vocal

[@BradDollar]

Ah dang! I’ll see if there another model on here. Give iZotope RX10 a shot. You should be able to do it with the free demo. I haven’t gotten rid of dog barks before but I have removed things like piano pedals squeaking and background talking. www.izotope.com/en/products/downloads.html

[@ags5]

ok, Let me try with this also. I tried with audo ai web site. They are giving demo example also before and after for dog barking. but not worked with my uploaded audio.

[@BradDollar]

Yea give RX10 a shot. That'll give you the most control anyways.

[@jigknot]

How about UVR-MDX-NET Inst HQ 4?

[@BradDollar]

Hey thanks for watching! HQ4 is probably solid! There wasn’t a HQ4 when I made the video. My guess is it’s just ever so slightly improved. Give it a shot! Worst case you just make some extra files and run HQ3. Let me know how it goes! Appreciate you being here!

[@songfinchartistcommunity]

[@BradDollar]

you rule!