This is the case I have been looking for... Goodisory A02.

[@tayflintstoner2873]

This case is special. I haven't seen a case this small that fits low-profile GPU's without a riser cable. Not even the aliexpress models, and this is as cheap as those! In stock just in time for my budget RTX A2000 SFF build.

[@childishcambino98]

Can you link the power supply you used? And other potential smaller options?

[@heirtothethrone000]

Just ran into this case and thought it would make a great build then I ran into your build video. Nice job and I would put a A2000 in it as well.

[@DRAKENGARDDDD]

a 4060 low profile better

[@mikeymaiku]

Rtx a2000 for me. But i went with a aliexpress cnc case that shifts the 1u psu beside the motherboard. But the ventelation mesh is much larger overall.

[@forrestmcclure]

do you have a name for the case?

[@murdock94]

I really wish other companies would make a case like this. I kind of wish there was a place to mount a fan on the front of the case to push air into the case from there. I plan to order one in the next couple of months for a travel rig. Going to go with an RX 6400 or an RTX A2000. Maybe there will be an RX 7400 LP by then.

[@TechLabUK]

I also wish some other companies would keep things simple with things like this. Did you decide on a GPU yet? Still not got one for this case.

[@murdock94]

@@TechLabUK Probably going with an RX 6400 unless I can get an A2000 for dirt cheap.

[@TechLabUK]

@@murdock94 Sounds the same as us then. The RX 6400 is a lot more obtainable although those A2000's look really nice. Shame no one has come out with another current gen LP card yet.

[@murdock94]

@@TechLabUK Yeah, the 6400 is a lot easier to get and would do everything I need to do. That said, I don't need it this year I think so I might wait to see if a LP RX 7000 series comes out. It'd be my luck five days after I get the 6400 a 7400 would come out.

[@TechLabUK]

@@murdock94 That is always my luck as well.

[@chris_hertford]

Great little case!

[@TechLabUK]

It is. Been looking for something exactly like this for so long.

[@Lennox032]

It's a cool little case but i would just add a 5600g and use as a little tv room pc for light gaming.

[@TechLabUK]

That's a good option. Love an APU build.

[@Dingbat1967]

Nice ... I got the X300 Mini from Asrock, no GPU room though.

[@TechLabUK]

Is it an APU based system?

[@J_D_Adama]

Thanks for the vid. I've never looked into a small form build like this! Very impressed. My Asus Prime B550 has been a lucky and trusty workhorse for my alt business PC. Do you think you will still use Asus products with all the highlighted issues from gamer nexus and jay2cents etc?

[@TechLabUK]

They are late to the game. We stopped buying Asus products a long time ago because out of the 6 Asus boards we have had in our studio, this ITX one is the only one that hasn't randomly died. We don't actively avoid them, our Asus Dual RX 6600 is amazing. Just cautious.

[@J_D_Adama]

@@TechLabUK what's been the most reliable manufacturer you have used so far?

[@TechLabUK]

@@J_D_Adama I have no real world data or analysis but when it comes to motherboards we have never had a single issue with anything from MSI. Gigabyte have been good but the odd weird issue, nothing died or anything but weird issues whereas MSI have worked 100%.

[@J_D_Adama]

@@TechLabUK I was looking for a new mobo for new gaming pc, have you had any experience with Asrock steep legend or taichi?

[@TechLabUK]

@@J_D_Adama Asrock seem fine, never had any issues with them. just haven't had a lot of them tbh.

[@victorhenostroza1871]

Hello, do u think the new low profile gigabyte rtx 4060 fits in this case?

[@TechLabUK]

Not sure but I hope so as I really want one for this one lol

[@coohlbeans2191]

It fits in it.

[@virgilpan8195]

I think the length of this GPU exceeds the case limit. Gigabyte 4060 is 18.2 cm but the case only support to 17.5cm, only if removing the usb module, besides the Asus 4060 is much longer.

[@thestreamreader]

What size fan do you think would work on top case cover? I just ordered 2 of these and would like to get the fans ordered. I am gonna get the 80 mm fans for side as you mentioned.

[@TechLabUK]

I don't believe there are any purpose fan mounts in the top cover. I would personally use a low profile cooler with a big fan on it and then it would act like two things at once.

[@thestreamreader]

I am using the Asrock n100 mini itx board that is supposed to be fanless for the build but still wanted to keep the case cool with air flow from the top.

[@larslovestech]

great review subbed...wanted to know is that PSU still available to buy anywhere also at that price...? and do you have a video with the fan mod...?....please

[@TechLabUK]

Ok this is so weird, I haven't had a comment on this video in a long time and you just comment as I came back to my system from pulling the system I have in this exact case right now for an upcoming upgrade video :O I believe you can get these PSU's from anywhere, I am using a 250w Gold rated one I bought from eBay for just £6 although I did the Noctua mod on it, painted the unit black and added braided cables covers. you will see in an upcoming video.

[@larslovestech]

@@TechLabUK is there a video on the mod and do you have a link for the PSU please...also these flex PSU's do not seem to be so cheap anymore either

[@TechLabUK]

@@larslovestech I don't have a video, when you buy a Noctua fan for them it just comes with a crimp on adaptor for the cables and you then just plug it in. You can find them for like £15 on eBay now, size dependent though as the one I just saw was a 220w.

[@mycooktube3542]

I need to know what type of use psu ?

[@TechLabUK]

A flex psu

[@friedrice9206]

Hello, bro. Is there any case like this that fits a Micro-ATX motherboard?

[@TechLabUK]

Not sure, I know Silverstone have the SST-GD09B-C which is a HTPC case that is similar and fits up to an ATX board but they are someone larger.

[@TechLabUK]

You could also check out their SilverStone SST-ML04B which seems to be Micro ATX.

[@friedrice9206]

@@TechLabUK Thank you so much for this info 🥳

[@skeivys]

If it had slim odd would be better

[@Limitedmclovin]

too small for modern gpus and too small to move an efficient amount of air throughout the case, cool for maybe 2 gens ago

[@samorwhatever4485]

Aluminum ends with an m not n

[@JezyYT]

Aloominion 😂

[@TechLabUK]

😂 trying to say it for all and it came out like that.