This little box will blow your mind 🤯 - BEST AQUARIUM LED REMOTE - with build in timer and dimmer

[@magwarblood]

I would say this has to be by far the best set up video on KZbin for this timer

[@juicesanchez1]

Ok, so for the past week, I've the noticed light turning on before the set time. Been looking online for a solution for this issue and I'm glad I went back to your video! I will use your recommended on the updated settings at "0" for the 1st and last node..

[@JurijsJutjajevs]

😉 💡 you welcome

[@Berry.954]

Thank you Hugo! I woke up at 4am to my light on, realized I needed the 1st node to be at “0”

[@tashmim1923]

@@JurijsJutjajevs Hello, I Want To Make My Own DIY Aquarium Light For My 3Ft Tank ... Can I Use This Great Device With My DIY LED Light For Sunset Sunrise Mode Like Smooth Ramp Up And Ramp Down The Light Intensity ?

[@scojophoto]

First of all a big THANK YOU to Jurijs! I have been using this on my Twinstar 1200SP III ( this is the new version) for 48 hours and it's working as advertised. I followed the updated instructions above with the 6 steps (not the 8 that is given in the video itself) and so far so good.

[@scojophoto]

UPDATE: ON APRIL 20, 2021 THE DIMMER QUIT ON ME. WON'T WORK ANYMORE AT ALL. CAN'T EVEN MANUALLY TURN IT ON AND OFF NOW. PERHAPS THE WATTAGE OF THE TWINSTAR 1200SP WAS FINALLY TOO MUCH FOR THIS DIMMER. THE TWINSTAR WATTAGE EXCEEDS THE DIMMERS STATED MAX WATTAGE.

[@JurijsJutjajevs]

@@scojophoto sorry to hear that. I had a dc connector melt on my 1200sp but after replacing the connector it continued working with the above light. the one I used on the UNS 5N with the twinstar 300E is still working to this day too

[@MrJaman0083]

I have 4 after watching your video. Easy, cheap, and it works. Covers about 90% of the commercial market with the adapter.

[@JurijsJutjajevs]

thank you, I can tell you a secret I have a follow up video on this one that will make it even better !

[@cody0125]

Jurijs Jutjajevs when is it coming out? I’m really looking to buy this along with a twinstar led

[@DroneShots_UK]

Also works with Superfish Scaper LEDs

[@JurijsJutjajevs]

Thanks for sharing

[@SergiCardonaGracia]

I have it working in my Twinstar and also in my old Chihiros, 100% recommended!

[@markustannenberger2798]

Sergi Cardona , which „old Chihiros“? I run a A361 on my 60l Cube.

[@SergiCardonaGracia]

Markus Tannenberger it was a Chiriros A451

[@markustannenberger2798]

Sergi Cardona Thank you!

[@scapesessions9069]

Wow, you weren't kidding that little box is incredible. I need one of these, great instructional video on how to use it as well Jurijs

[@daniell-philippmadscher7130]

Works also very fine with the Sera Led Tube System.

[@daniell-philippmadscher7130]

@@JurijsJutjajevs kein Problem :) hat mich selbst sehr gefreut, da der Dimmer von Sera leider nur ein Witz ist.

[@pro-maja]

perfekte Erklärung , danke für dieses hilfreiche Video .Ich dachte schon , das ich meine Twinstar nicht vernünftig automatisch dimmen lassen kann , doch mit diesem tollen Teil ist es sehr einfach.

[@stockraker1690]

I have a Twinstar. Finally a dimmer is available and of course I found out from my friend in Germany 🇩🇪. I ordered one on Amazon before I even finished your video. Thanks Jurijs

[@jamesgreen9372]

Cool device, my son was looking for a solution to this problem. It is nice to know someone stepped up to the problem. One has to appreciate your ramp up programming explanation. Math, science, biology, engineering, ISO 8601 time, and common sense, one has to love that combination! Thanks, Jim

[@JurijsJutjajevs]

Check description and pinned comment for updated schedule I use

[@davidrocha1719]

This was such a GREAT clip !! I had no idea you could technically run the light all day of course at 3% after the 7-8hr cycle !! I have two kessil lights with controller will try it out ! Definitely a must watch video in my opinion

[@juicesanchez1]

Works great with Finnex Sting ray v2 led light.

[@lookup49]

Thank you for this video. BUT please explain the use of the buttons. This was never explaned...or I missed it. Thanks.

[@freddy9233]

Hey Juris , I think that this device must start with 0% at the first level for the light to come up . If you start with 3% it will stay all day long on that .

[@Dc-sx3wm]

You're right. the first and last mode should be at 0% for it to turn off

[@juristimma5366]

hmmmm lets see,that's problem what i Have....

[@JurijsJutjajevs]

See my updated schedule in the description

[@bankaingn3104]

Mine turns off at the time i set to 0 which is 8pm but it turns on at 11 pm rather then 9am. Its so confusing

[@Peterthegreat1234]

@@bankaingn3104 I have the same problem. Light turns off at 22.00 ( as planned ) and switches on again two hours later.

[@gcm747]

Yep. This little box IS awesome! I ordered one based on your video for the LED lighting for my Aqua One Grandview 290L. Crossed my fingers that it would work and it did! Just love it. Adds such a great ambience and is beautiful to watch the tank under 'moonlight'. I'm sure my American Cichlids appreciate it too!

[@homicidal85]

just bought one because of this review. very impressed by it. my lighting setup is now exactly what i wanted.

[@edwiser]

The one thing I have notice with planted tanks is that the LED manufactures are so far behind the Saltwater lighting people. This is 10 years ago tech on a saltwater lighting system. Two star should already have a WiFi phone control app that does all this for you. In saltwater This would even be an issue as they couldn’t even sell a light that you had to buy an extra box to do this.

[@zulfadhliazizan6397]

Great to see this Jurijs, at first i have problem with this device (when i use all 8 timer), it increase brightness automatically (random brightness) after dimmed to 0%...and flicks on every second it dimming to 0%...my working solution (for me) is not to prog all 8 timer...i only set to 4...and it works! No problem since then. Hope this will help others too😁👌...btw, my led is Chihiros a401

[@corymartin4132]

Do still use first and last setting at 0%?

[@zulfadhliazizan6397]

@@corymartin4132 yes, still use😁👌...its still works if you add more than 4 set (now i use 5 set)...just don't use all 8 set...it will have/give problem.

[@corymartin4132]

@@zulfadhliazizan6397 I will try this. Thank you sir

[@gomez7655]

It works pretty good!! I use it on my Twinstar 300EA and it is really awsome for the price!!

[@andreamaruzzella579]

It's compatible with the led of juwel rio 240?

[@cdsmith1990]

Sorry if this is an obvious question, but this is different to my other dimmer so I want to make sure I set this one correctly - the 'ramp up / down' rate is directly related to the time you set before and after? So, for example, if I have 0% at 08:00 and 100% at 08:01, that would mean the light ramps up from 0 to 100 over the space of one minute; whereas if I have 0% at 08:00 and 100% at 12:00, it would ramp up from 0 to 100 very gradually over a 4 hour period? Hope that makes sense?? The dimmer I currently use only have preset 'ramp' periods of 15, 30, or 60 minutes I believe.

[@JurijsJutjajevs]

yes its exactly as you have described

[@cdsmith1990]

@@JurijsJutjajevs awesome thank you dude

[@cindymcmillen1988]

I realize this is an old post so hopefully you are still seeing comments :-) I just rec'd one of these 2 days ago and found your video to be extremely helpful in setting this little box. However, after I finished my programming, both first and last setting at 0%, my display flashes back and forth from the correct time, then AU70, back to time, back to AU70. Does this mean it is actually in Auto mode and that my settings did not take effect? If so, how do I correct this? This is my second time trying to program this!

[@JurijsJutjajevs]

AU7O = Auto Mode, means your settings are active

[@Moolaz]

Any idea if this works with an ADA Aquasky light?

[@Horlokx]

For anyone else it is not plug and play with the Fluval EBI Shrimp tank LED. Even purchased the adapter.

[@captaindenis]

Thanks for the review! Already ordered mine on AliExpress just for 11$ 😜

[@zeppike]

Does this work with an old aquasky 601? I heard it doesn't like to be dimmed, whatever that means.

[@JurijsJutjajevs]

if the connector fits, it will work, and it fits 😉

[@zeppike]

@@JurijsJutjajevs Ended up buying one. It works like a charm. Thanks for the tip :)

[@Drazorig2]

Does is work with the AquaSky 451 for dimming as well, assuming it will if it works for your 601? Does it need an adaptor or plug and play?

[@BirdCrank]

Any idea if this works for a fluval evo 13.5 light?

[@AquaGardenAquariums]

The same shit for two lights from Dennerle costs 150 EUR. I could buy 10 of these for that cost. Really handy, thanks!

[@beejay1962]

Just got this device today. Thanks for the instructional video. The card that came with it is hopeless. One question: mine flashes the time and every five flashes or so "AU70" - What does that mean? Also had it switch itself back on after a while when I manually switched it off and put it back into auto mode during the period where it was meant to be off. For now I set it to manual to avoid a sleepless night for the fishes.

[@mastmalang70hk]

can you run 2 lights with splitter 35 watt each and 20v???? how much power adapter you need ????

[@Patrik95]

Hi Jurjis ! I want to hook up this timer to any custom diy led lamp (60/70w) maked of 3w led chips, it will be enable to do that ? I cant really find some more info about wattage, how much (ma) is on output ? Can you please share with me any infos about this timer ? It will be Nice !

[@Drazorig2]

For the ADA aquasky, does this work and is an adaptor required?

[@jacike]

TC420 - 5 channels - e20, tc421 - 5 channels with wi-fi - e25. For example you can have red, blue, 6k, 8k, 10k, separate channes, 1% step each, with automatic dimming. 12-24V, each channel up to 5A. How cool is this?

[@makesomewaffles8896]

awesome helpful video. You have an amazing apartment set up. Love the color tones

[@gankas]

when should I start the co2 when using this type of program? before 25% or more? and how long before pls?

[@JurijsJutjajevs]

Start CO2 as soon as light starts or 1 hour before light

[@gankas]

​@@JurijsJutjajevs i have 2 controllers connected to 2 S600 v.3. the lights turned off at 23:00 and then for some reason they turned on at 01:50 instead of 6am. I found the lights turned on at approx. 3%.

[@gankas]

why do u think that is?

[@JurijsJutjajevs]

@@gankas make sure your first and last settings are 0% hope that helps

[@THE-GAD]

Works this whit chihiros led?

[@salserobadi5206]

Will this remember to time and programmes if unplugged?

[@tianeyy]

No i've tried

[@iloybanal7848]

so if there is a brownout, the program will be erased right?

[@tianeyy]

@@iloybanal7848 right

[@-exeCy-]

Hello Jurjis, one important question for co2 users. According to your time cycle what is the best time to set the timer to start/close the the co2 ? Thanks and keep up the great work!!

[@GeezerTuber]

If the plants are photosynthesizing, they need CO2, otherwise they just need oxygen. I'd have the light lag the co2 just a bit so the co2 has time to build up before the lights fire on. I'd also stop the co2 before the lights go off for the same reason. If the lights are less than 10% on, you're probably not photosynthesizing much, so I wouldn't count the first and last periods of the day either.

[@AyeGeesy]

Can you turn the light on for a maintenance session and then turn it back off without breaking the programming?

[@mikeinca3762]

Great video! Love the breakdown of the light timeline breakdown! Great info! Thanks Jurijs!

[@nerijusadomaitis112]

Hi Jurijs. This is the old version of the timer/dimmer. Now you can get a Bluetooth version from the same manufacturer and control everything from your phone. Much easier to set up, includes a timeline and Auto/Manual modes.

[@nerijusadomaitis112]

@@JurijsJutjajevs www.ebay.ie/itm/Chihiros-LED-Light-Dimmer-Controller-Modulator-For-Aquarium-Fish-Tank-Led-Timing/153303060189?hash=item23b1930edd:g:onkAAOSw6KxcE3Uw

[@nerijusadomaitis112]

@@JurijsJutjajevs Oh, sorry then. I didn't know that. I'm using Chihiros RGB ligts.

[@nerijusadomaitis112]

@@JurijsJutjajevs I'm not sure what connectors are on Twinstar, but on both dimmers connectors are the same. I have both versions.

[@M0rb]

Nerijus Adomaitis I’ve got the Bluetooth Chihiros dimmer and although I love the smartphone Bluetooth function, this product is not that great : the user interface is terrible and there is no ipad specific version to solve that problem. There is no smooth dimming, only incremental steps, the clock does not seem to change to summer time and it will offset over time (10 minutes or so a month). It also stopped working one day and simply didn’t start the lights for some reason. I had to set it back up to get it to work. It does work but comes with a lot of caveats.

[@nerijusadomaitis112]

@@M0rb Well, its not perfect,I know, but I like it much more then the old version. Especially because both dimmers are well hidden behind my aquarium and if I have to switch the light at night or so it's just enough to press the button on my phone, but not try to find the controller behind the aquarium. Mine does smooth dimming. I can't see any difference between old and new then it comes to dimming. You might have to update software or something. It synchronizes the time every time you open the chihiros app, same with the summer time.

[@edSam0528]

I followed the same exact settings as you showed in the video but it seems it's not turning off. Can you help me fix it?

[@homicidal85]

You need to make sure it is in auto mode. Click the mode button until the display says "auto"

[@Cookie_Snicker]

Works great, love it!! But remember, the first timesetting could Start with 0%! And the last set also with 0%. Otherwise you find a bright suprise at night, sleepwalking to take a piss....

[@eduardoferreira8121]

Just got one and its Great... Just trying to figure out how to do light cycle with co2

[@adams_1]

I have my co2 come on at 11am (lights gradually start from 10am). LEDs are at 100% at 3pm. I usually get pearling from about 60-70% around 1:30-2:00pm. By this stage I have good co2 levels in my tank. Co2 is off at 7pm, lights completely out at 10pm.

[@cross7707]

I didn’t see a video on the ceiling light height adjustment?

[@JurijsJutjajevs]

Hanging Aquarium Light From Ceiling kzbin.info/www/bejne/hpLRfK2ZqrmJY8U

[@JurijsJutjajevs]

AQUARIUM LIGHT SUSPENSION of your dreams 😲💭 kzbin.info/www/bejne/gHzJYWuIes6rh9E

[@jennywrbl]

Thanks for the Video! Does it work with the Kessil A160WE Tuna Sun?

[@aryan7268]

How shall i set my co2 timer when im using this dimmer with the tank ?

[@3800S1]

Does the timer remember the settings and clock time when it's disconnected?

[@JurijsJutjajevs]

Yes it does, but I haven’t tested for how long

[@3800S1]

@@JurijsJutjajevs Thanks so much for the comment. I have had great difficultly finding anything on google, ebay or just in general in Australia. I bought one that is commonly sold out of China on ebay AU, but it's pretty ineffective after I tried it out. Didn't allow brightness adjustment in the ramp mode, only manual and the clock resets on power loss and can only be set via a factory reset. Seems a bit silly. I can get the one in your video via the amazon link which is great! I will have to make my own adapter though as my Beamswork light uses a 4 pin plug for the light itself but it's just a 12v unit with it's own controller for the different channel modes, hence why it has more than 2 pins, but I will just wire all the channels together as I only use the full spectrum mode anyway. I have a low tech tank I am still figuring out as I go with axolotls. This will solve two problems, algae which was too much light from my old non adjustable light and the other is the axolotls do not appreciate the light suddenly come on haha.

[@JurijsJutjajevs]

Give it a try, I guess at this point you have nothing to loose 😉

[@3800S1]

@@JurijsJutjajevs Mine arrived, just about to program it. I had to make a custom barrel jack to 4 pin mini DC LED connector that my Beamswork light uses. Works now with the S2 Pro. Regarding the clock, it does keep the time with power off for quite a few hours, but if you leave the power disconnected overnight, it does drift out a lot, mine was 40 min out but it doesn't reset per se. So I guess it has a capacitor or something inside to keep the clock running properly for a good few hours, very handy for intermittent electricity supplies. I used the Photone app to calibrate the timer against my current built in dimmer timer to a known good light level, it came our as 67% which on the old timer was 2 levels down from full power, it ran 8 hours. I am trying 9am to 5pm at 67% as it is currently, but adding in 100% for 1 hour centred on 1pm. And 1% ramp 1 hour before and after the main light curve. I have a low tech cold tank, and algae was a huge issue with my old EA light, at the current setup with the Beamswork Vivo light, I am on the verge of algae, mostly diatom and very slight green hair fuzz but it could be the diatom as it's not very green. I need way more plant mass though and to change my substrate which is causing me a lot of issues. Anyway, I hope this 1 hour boost will help with some of the plant stem elongation and still not trigger algae. I'll post an update in a few weeks.

[@JurijsJutjajevs]

Glad you’ve been able to DIY your own connector

[@anyamuci6747]

Thanks Jurijs it helped me a lot :)

[@reefer9224]

I bought this from you're review an it seems it likes to come on whenever it wants to.

[@tommiekrausedrums3550]

Same here

[@deepanjanbabai]

If there is a power cut, do I have to manually set the clock or it has some internal battery to run the clock?

[@JurijsJutjajevs]

If I remember correctly it has internal memory

[@nefertariinxs]

all your videos and those from green aqua are amazing, thank you for the amazing tips you re giving us to establish our scapes, much affection and regards to all of you

[@adams_1]

The Micmol G2 Aqua Air led system has the same functions as this, and also has thunderstorm settings. Comes in 2 variants, Marine and Planted.

[@adams_1]

Agreed. I don’t use it, doesn’t look that good and the fish probably don’t appreciate it - but I guess some people would like this function.

[@edanjwalters]

How do you stop it turning off overnight when it's at 0 %

[@strangesynth5819]

By installing let say three "S2 Pro" boxes and three lamps of different colour temperature, effects of sunrise, transient clouds and sunset may be generated very easily. Somtimes the "S2 Pro" boxes can be found on Amazon in three-pack really cheaply.

[@JurijsJutjajevs]

sounds like you have a project in your mind

[@strangesynth5819]

​@@JurijsJutjajevs I think about 1 DIY lamp (I love DIY), with 3 strips of led: 5000k, 1500k (more less) and one blue. Hope I'll get the effect I'm thinking about. Cheers!

[@Peterthegreat1234]

I have a problem. After the light is switched off in step 8 it simply turns on again after two hours or so. The clock is set correctly ( 24 hours ) Everything else works ( ramp ) and as far as I can tell I have/had nothing to do with this. Please help Peter.

[@micoton55]

Bonjour Après les réglages, on doit mettre le mode auto?

[@pharrelltezcanart]

Thanks for the help =DD

[@KaitanX]

This device works really well with the ONF Flat Nano as well! Have one myself and it’s amazing 👍🏽💡

[@pliny1449]

Works with my ONF Flat Nano too, but when I get to 10% the light already seems to be on full power. Do you have the same experience?

[@joycehendry3595]

Ace vid and Thank You I needed this video to understand the time lenght and light percent

[@matthagan4854]

Mine has started to act strange for me as of recent. I woke up early in the morning to see my light on although it's in auto mode. Now at peak time where it's programed for peak lighting it's half the intensity of what it should be. Have you experienced this before?

[@JurijsJutjajevs]

I haven’t. However what I have noticed some lights start flickering at lower than 10% settings. I suggest you reprogram the controller and see if it helps. If not, try to get a replacement.

[@azertytje007]

So at the timeline you have drawn, where do you open the co2 and where do you close it?

[@JurijsJutjajevs]

As soon as the timeline starts I open co2 and close it when it starts to dim down.

[@raulmoreno3487]

Is it valid for an ADA Aquasky?

[@JurijsJutjajevs]

If the connector fits, it will work

[@ashketchup1093]

Can I use it with Twinstar III EC Lamp?

[@RusticRaver]

What would you use as dimmer timer for a meanwell ballast 120w controlled by 0-10v?

[@CriancaGorda]

Excellent device. If possible are you able to do a time lapse from 6am to 10:30pm?

[@CriancaGorda]

TBH I was mostly curious to know what 3% looked like but towards the end of clip when you said it ramps the intensity instead of harsh changes ... I was intrigued...

[@antonisimagine]

I just got one and it doesnt work with my sun sun light

[@yourlocaltoad5102]

Very interesting device. I think I might use this on my 30L-cube when I redo it. Could be really interesting, especially since its more natural for the fish and so I wonder, if I can observe a change in their behaviour. Because currently they always seem a bit shocked when the light suddenly starts at 100% intensity and also when it suddenly turns off

[@alexey_sychev]

Can be added to the compatibility list: works with Aquatlantis Easy LED 2.0

[@isaact0ng]

Great video as always! Do the settings reset when unplugged?

[@Peterthegreat1234]

Settings are stored even if unplugged. You can program the timer as long as it is plugged in an outlet. Connecting it to the light/lamp isn't necessary. I program it at my desk and then carry it to my fishtank.

[@quanganh599]

So if I set 06h30 : 0% 07h : 60% then Will the light increase gradually 0-60% or immediately?

[@JurijsJutjajevs]

Gradually

[@Love.Cook_Sanji]

Hey i bought in the same light dimmer and is connected to my beamswork led light n set my timer from 3 pm - 9 pm but for some reason my light always seem to turn on during the night at 15:00 am. I have checked if i have set light on during that time but i have not its down to 0. If this sounds familiar to u n have any advice on what i am doing wrong then plz help. Thanks great vid

[@JurijsJutjajevs]

Set first and last program point to 0%

[@Love.Cook_Sanji]

Jurijs Jutjajevs 👍🏻👍🏻👍🏻

[@Peterthegreat1234]

You're not doing anything wrong. I ( and not just me ) have the same problem.

[@Love.Cook_Sanji]

@@Peterthegreat1234 Follow Jurjis method; start and end with 0 u wont have a problem. just curious tho what brand of aquarium he is using ? O.o

[@Peterthegreat1234]

I've reprogrammed the timer and it works fine now, thank you.

[@diegochinchilla3209]

Awesome, do you know how I can Install it into my black box reef light? I have no idea and I can’t find a tutorial online, please helpme

[@JurijsJutjajevs]

if it fits into the dc cable of your reef light it should work the same way

[@gustavosivila4240]

Great video Juris! Just one question: how do you combine this light cicle with the Co2 adition? Now I got them plugged to a traditional mechanical timmer and starts and shut off at the same time. Thanks in advance, Gus from Spain

[@gustavosivila4240]

I just read others ask you the same! Answer: at the 25% period. Ok?

[@gustavosivila4240]

Jurijs Jutjajevs thanks Juris. I really preciate this kind of videos with really usefull information. Great Job! 💪🏻👍🏻👍🏻

[@whiteautumns]

Following your lighting % killed me LOL. Had a massive problem with green hair algae. I had to lower my lights to about 40-50%.

[@JurijsJutjajevs]

Sorry to hear that, was the period too long for you, or was your previous overage lower in general?

[@Vykker]

Du hast mir den Tag gerettet! Musste mir vorher zwei Videos auf spanisch anschauen, bevor mir endlich deins vorgeschlagen wurde. Und das, obwohl ich dich abonniert habe. Komisch... Wie auch immer, jetzt läuft mein Dimmer endlich. Danke für die gute Erklärung. 👍

[@K2MJP]

Great video! Made it super simple to set up. I have one issue with mine. The unit is very hot after running for only a few minutes. Do you have this issue as well? I’m worried it will burn out or cause a fire

[@JurijsJutjajevs]

yes it gets warm, but so far after years of use no overheating issues

[@michellefebvre184]

Bonjour. Moi aussi j'ai le même problème. La lumière s'éteint à 22h00 (comme prévu) et se rallume deux heures plus tard.comment faire pour que le cycle soit correct.

[@JurijsJutjajevs]

make sure you set mode 1 and mode 8 0%, this way it will remain off in-between, otherwise it will ramp up from 8 to 1

[@jpugarteh]

Does it work with Sunsun ADS Series? Where can I buy this product? Thanks

[@JurijsJutjajevs]

amazon links in the description, works with all lights that have a simple DC connector cable

[@nerdbert]

Hi Jurijs, great vid! Unfortunately the adapter seems to be not included anymore (ordered two boxes from the Amazon DE affiliate link). It works with my TS 600s's, but it took quite some force to plug them in.

[@nerdbert]

Thanks Jurijs, this is highly appreciated! I'll use the adapters as soon as they arrive. After some days of fiddling with this device I'm very impressed by its overall performance and usability. I originally bought a TC420 for the same job and never got it running because of all the hurdles involved (cutting cables, Windows, Mini-CD and the thought that I'd need the software at least twice a year to change the clock...). This is so much better from a usability point of view and it also delivers performance wise.

[@nefertariinxs]

i ve seen on amazon some one complaining the device melted after few days and nearly set the house on fire,what are your exüeriences ??? everything ok?

[@DimitrisSiozos]

I had the same thing happen to me just NOW!!! I think that it does not support high volt current. It is probably compatible with low voltage power supply. Also it destroyed my LED lamp :P

[@Darker74]

Jurijus Nice video, but you didn't explain how to set off the 3% moonlight mode??I'm using the same model as you and programmed the same way as you did, but i get every night the 3% moonlight mode on, can it be set off or not??

[@JurijsJutjajevs]

Set first and last timer mark 0%

[@shortyleatherworks5693]

So with this type of timer, we can get more light period?

[@justinlawjm]

Thanks for the review! ordering one right now

[@tedwesthead7240]

Hi.Would this work on a 90cm ONF FLAT ONE?.

[@JurijsJutjajevs]

ONF has app control, why would you want to use an external device

[@tedwesthead7240]

@@JurijsJutjajevsThe App device works well but it can't be ramped up and down via programming automatically on my lamp.I bought it two years ago.Its a brilliant lamp though. Thanks for your reply.Ted.

[@tedwesthead7240]

Apparently the 60cm model could be tuned to be ramped and not the first version of the 90cm as I have sadly.I think many others like me would love a gadget to sort this problem out.Ted.

[@Kapybaraaa]

Hi, are you able to use this dimmer at a certain percentage throughout the whole photoperiod without the ramp up/down?

[@JurijsJutjajevs]

yes just set T1. 0% T2. x% T3. x% T4. 0%

[@Kapybaraaa]

@@JurijsJutjajevs ok thank you for the tips and advice! i moved my inlet and outlet closer together and it seems to have helped with the dead spots :)

[@filtertier]

i use the same gimmik since two days. its amaising + thanks for the video

[@JurijsJutjajevs]

Check my new schedule: 1: 0% One minute between 2: 10% Ramp up over 30 mins 3: 100% Keep 7hours for the main day cycle 4: 100% Ramp down over 30 mins 5: 10% One minute between 6: 0%

[@paulopires5931]

I have that controller but it doesn't come with that adapter and i would like to know what is the size of the tip of that adapter because my controler doesn't connect to my Twinstar 120b, it won't go in and i don't know if the tip is suppost to be 5.5mm x 2.5mm or 5.5mm x 2.1.

[@JurijsJutjajevs]

I’ve been able to force connect (try at own risk) or see pinned comment and description for link for that connector

[@paulopires5931]

@@JurijsJutjajevs I bought the adapter and I configures from 8 to 22h starting with 3% at 8 and ending with 0% at 22h and it does turn off completely at 22h but during the night I checked and the light was on and it should only turn on at 8 with 3% or am I doing something wrong.

[@nvelopestudio]

This is an excellent light and a very cool smart control! I would like your guidelines about my all-new Fluval Aquasky v.2.0 My tank is fully planted with easy and medium plants. I found out that something like your timeline schedule seems a nice start (at least for a week to see how my plats will react). I can control RGB plus White in an up to 10 points schedule. I would love to have a piece of advice! Keep up the good work and do aqua scaping!! Best, Konstantinos

[@JurijsJutjajevs]

I don’t have experience with the fluval led, cannot recommend anything specific. Sorry

[@nvelopestudio]

@@JurijsJutjajevs Thank you anyways

[@nhsguerreiro]

Hi, I bought one of these, but it didn't work well, the brightness change randomly. There is a way to reset manually?

[@JurijsJutjajevs]

Have you checked all 8 parameters?

[@nhsguerreiro]

@@JurijsJutjajevs yes, i set it all several times, but as soon I change the programming to auto it decreases the power randomly. I set mine just like you did in the video, but instead to be at 50 it goes to 39. Or it is set to be in 100 goes to 49 or other number. I'm considering buy another one if I can't reset. By the way, I love all of yours videos. You create just perfect layouts.

[@vijay0066]

I recently bought a Twinstar 1200SP light. I notice that the exact middle/center of the light does not get lit. It seems like either there are no LEDs in the exact center or my light is faulty. I will really appreciate if you can check your 1200SP model and let me know if you notice the same. I do notice a similar thing around the 12 minute mark in the video where you show the light from underneath, but I am not sure.

[@JurijsJutjajevs]

the 1200sp is basically 2x 600sp in one housing - there is a slight gap in the middle. you can open the screws on one side carefully (no cable side) and slide out the diffuser panel and you will see led

[@vijay0066]

Jurijs Jutjajevs Thank you for checking. I am glad that my light is not faulty.

[@leoscapecarl]

Looks neat! What is the reason for avoiding longer daily lightning periods (>8 h) in planted aquariums?

[@HAlves-ip9cn]

algae

[@leoscapecarl]

@@HAlves-ip9cn Yes, but was looking for an answer explaining why

[@leoscapecarl]

Thanks Jurijs! Must be something like that I imagine. Plants and algae may have different circadian rhythms, where at some point during the photoperiod plants stop their photosynthesis whereas algae continues to grow. May be dependent on plant species as well.

[@leoscapecarl]

Guess the recommended daily lightning period comes from experience and is something that would be difficult to measure in an experiment.

[@kadsyy]

Hi, just a question. During the low/dim light does it consume less electricity than full 100% brightness?

[@JurijsJutjajevs]

I don't know, one has to do the testing

[@karabashandrei772]

Great video! i buy one but can you show us how is the new programing please🙏🏽 i have the same issue and it light’s at night when it shoud be 0 (the tank is in my bedroom)

[@karabashandrei772]

Jurijs Jutjajevs thank you you’re the best aquascaper❤️ can’t wait to see the moss mud protip video❤️

[@michaelkane2470]

Good Morning Jurijs.......I wrote cannon ,and wanted to buy the Canon Aos 70 D Camera/Camcorder,it said it was out of stock.I emailed Canon Customer Service ,they said the 70 D is no longer sold,but was upgraded to Aos 80 D.What is the best lighting in a Aquarium ?I thought I heard the lowest light,is the best to keep Algea out.Thank you for all your help in Suggestions.I research Ada Aquariums too,love the design.

[@ObrerSchmied]

Does the Controller also work with 12V instead of 36V?

[@JurijsJutjajevs]

yes

[@nefertariinxs]

dear jurijs, in tropical countries day to night and viceversa isnt as slow as here in europe but its very fast night or day, so i would dimm from day to night and from night to day faster, but i would rather mimic weather changes, grom sunny to rainy and thinder, changing intensity during the day, also not always extreme, some times more some times less as in tropical countries weather is more stable, i did set up my dimmer imitting tropical light, day to night ub 10 minutes, yyour settings are too european, i hope you understand what i mean, you will see in tropical coutries, it wont get dark suddenly as switching off the light, but it will get dark very fast, not slowly as in europe

[@JurijsJutjajevs]

My settings is not supposed to mimic realistic day night cycle. Only a smooth transition and ambient light between main light cycle and when the light goes off

[@nefertariinxs]

@@JurijsJutjajevs ah ok , as i just bought it i will set it as you did, only beginning and endi will make more tropical, did you have an electricity problems with the device? love your vids they are greate

[@burchwoodgaming]

So with this schedule the lights are at 25% or more for 10 hrs and on for a total of 16 hrs. Are you not concerned about algae growth while running at the lower intensities for such an extended period of time?

[@JurijsJutjajevs]

this was just a demo cycle - please adjust to your own needs