This Man is a Genius! DIY Sandblasting Cabinet!

[@joepeanut6827]

Paint the inside White, that will make it a lot brighter in there.

[@LifehackInspector]

Yes, but the work surface inside will quickly be erased(

[@CheekyTyke007]

No not really, I mostly blast down towards the item……you won’t often be blasting directly at the inside of the cabinet. Trust me, take his advice and paint it white.

[@zachariasvan3965]

You can better cover it with self adhesive white plastic. This is not vulnerable for abrasive medium.

[@mountainmann9599]

Outstanding job.

[@dooleyknoted5951]

FIBERGLASS RESIN PANELS FRP can be found on the walls of some commercial/ public bathrooms. Easy as hell to work with. And that solves the deteriorating paint issue.

[@garymucher4082]

Very nicely built. Install a foot activator for the air pressure and you will love how that works so well. The media blasting only happens when you press the foot valve. Thumbs Up!

[@mememaster147]

Also a cyclonic separator between the cabinet and vacuum cleaner will make the bag last a lot longer. You can get cheap cyclones online and mount them to the lid of a bucket.

[@martinpoulsen6564]

@@mememaster147 If you notice, the setup here is a bit different, as only the fine airborne dust that will fit through the airfilter mounted on the top inside of the cabinet will pass - the rest goes in the bucket. Otherwise I completely agree, cyclones are fabulous inventions, and he might get tired of cleaning and changing the filter. In my experience, the blastcabins that work the best have a fairly large amount of air passing through, where a cyclone would be an absolute must.

[@msteveson]

Great project but it is surpassed by the absolutely incredible video editing and storytelling.

[@LifehackInspector]

Thank you very much, I tried!

[@boxer71c55]

This guy needs his own show on discovery, i mean the creativity with those gloves was truly impressive! Awesome build.

[@briandavern8741]

I know right? I like the idea as the denim is strong and gloves replace able.

[@octaviojunior]

Gênio! Um verdadeiro Einstein 🧑‍🎓🧑‍🔬🧑‍🏫

[@warrenjennings1686]

The best editing award goes to Idea Hub!

[@darrelkinney9856]

Like the way it opened up, small glass, cool way to go.

[@blackinblue11]

That grinder cut in slow motion was so dramatic, love it!:) Great skills and imagination, my friend, cheers!

[@mattharvey8712]

Bravo.......had old freind...... own a vw junkyard......the back end of a van cut off.....blast on top side.....the sand would fall into engine compartment.....greatest design.....cheers

[@SteveInQLD007]

Man, what a brilliant job on the build, has given me a few ideas of my own actually! Well done 👍👍

[@MrTidjon]

impressive work.... not for the average DIY'er, but still, very well!

[@jonathanhall7903]

Great project. A lot of time and planning, design involved.

[@ggworks2]

Ingenuity! I like how you have used scrap bits to achieve the build. What about making it with water and sand? I like how you thought of the jean sleeves and garden gloves. Thinking outside the box! Well done!

[@adrianhernandez974]

Hola amigo, me encanto tu video. Te felicito, mi admiración y respeto. Saludos de “AZTECA KNIVES” desde Ecatepec, México 🇲🇽

[@christophermaurer1271]

You deserve a subscription. Utilising what could end up as waste is very impressive. Cheers from Australia.

[@ioannouandreas4]

How did u come up with such a brilliant idea?? Why noone else havent thought about it all theese years?? WOW!!

[@galpaodegambiarras]

Parabens meu amigo, ficou perfeita a sua cabine de jateamento, vou me inspirar nela pra fazer uma para minha oficina, já estou inscrito aqui no seu canal, sucesso!

[@aequitas_vlad]

О, Владислав Павлович. Тепер зірка світового масштабу)

[@joepie221]

Nicely done. You'll get a lot of use out of that project.

[@LifehackInspector]

Thanks for the kind words

[@crazycarl9484]

Great skill for nice finished product, very well done, a pleasure to watch, thanks for sharing.

[@vin-23alex65]

Ай молодець, треба розвивати аудиторію!

[@matejburger3217]

Very good project, I'm interested in how much pressure you have for sandblasting

[@Otras_cosas_de_Jorgito]

Excelente !!! ... muy buen trabajo ... realmente inspira a copiarlo. Un abrazo desde San Luis, Argentina

[@LifehackInspector]

Hola Argentina desde Ucrania!

[@stephensomersify]

Nice editing - Frugal costs ---- Well done! old git, UK

[@chriskipling778]

If you tape a piece of plastic film to the inside of the glass it'll save having to replace the glass when it gets frosted up. Just replace the film.

[@TheMrneosoul]

That’s freakin impressive 👏🏾👏🏾👏🏾👏🏾

[@osukacards]

That was very well made good craftsmanship. Dope af

[@gnashermedia]

That was fun to watch. Respect for your work. But what about electro static charging while sandblasting? Maybe check this out to prevent static shocks as there will be a charge building up when blasting.

[@bigbelconut]

Great video, your blaster works better then my store bought blaster. I'm going to try the filter I on the vacuum side on my cabinet. I tried it with no filter and all it does is suck up all my media.

[@Mpatient1]

Amazing, thank you for showing me why I should just buy one :D

[@nathans1978]

This is inspiring. Fantastic work and video editing.

[@TimberTrainer]

Looks good on the GD. I would call it hyper swamp.

[@billlupton3639]

Very nice. Now I know what I’m going to build with an old clothes dryer I’ve got. Thank you

[@LifehackInspector]

Great! Good luck!)

[@michelray1396]

Superbe travail,bravo 👍🏆👍🏆👍🏆🇨🇭

[@Четланин-д9я]

Круто що українці знімають популярний контент для світу!

[@officialmysteriousrider130]

Built mine from a 55 gallon drum & some thick glass salvaged from a tv cabinet I've had mine years still going strong. i bet its like desert storm useing a pressure pot inside that 😂

[@powertoolsrepair]

Nice project👍

[@loatherd]

Need to get some type of industrial suction for long term, hoovered up silica after a sandblaster and it killed hoover in 2 days lol

[@brucelee-tn2mg]

das ist sehr gut danke

[@mrsrx47]

The perfectly good tank 😫

[@bdove7939]

Very nice work

[@MasterofNoneTV]

Great video! Thanks for sharing this

[@chuckster6513]

Nice cabinet ! It needs more volume for the exhaust vacuum to clear the dust out. Ad more ports with multiple hoses connected to the single vacuum though it may need a larger vacuum.

[@LifehackInspector]

Yes, you are right. Definitely need more holes and stronger ventilation

[@wambsganz8]

@@LifehackInspector If you can swing the money get a woodworking vacuum with a cloth bag. That little filter you have on the inside will clog up quickly

[@bengrogan9710]

@@LifehackInspector I would advise you forget the idea of a vacuum for dust extraction and add a filterbox with a large fan The main issue is that Vacuums work on pressure mainly, rather than flow rate, You need to compare the extraction CFM (Cubic feet per minute) to what it is fighting against - Your air compressor's flow output at whatever PSI you are using for the blaster

[@garyyorke1080]

Not a bad project if you have the time and space . Nice large door on the front but i would have made the glass area a bit bigger . Could easily be converted to a gravity fed media outlet on the base of the funnel save keep filling the pot . I was hoping as he painted it that it wasn't going to be red ... but alas lol

[@LifehackInspector]

Great idea

[@lashchenkoandrey5478]

Молодець!

[@patrickmckowen2999]

Awesome build👍

[@LifehackInspector]

Thanks 👍

[@rogertaylor8615]

That's pretty

[@AB-ot3bc]

Very nice

[@mrsimo7144]

Great work.

[@DonPedro-dy1ly]

Зачётное начало.Маловато коробочка как по мне .детали разные бывают плюс Нада соблюдать расстояние от детали чтобы не сильно выбивать металл

[@SCHRE1END]

Simplemente Exelente 😊

[@1959rossco]

Great job

[@zentecgarage]

Great stuff, well done, give me a few ideas for mine

[@LifehackInspector]

Thank you friend

[@efrainberrios8494]

Awesome!

[@tomsherwood4650]

The gloves and sleeves better be really heavy durable material in any case. Even the heavy rubber ones get blasted thin eventually.

[@Azzty45]

Outstanding

[@edwardweisenburg16]

Awesome 👍😎

[@andywarrington4738]

you need to earth bond to a spike or main earthing point due to the static build

[@elmuro]

Now I know why I receive little discharges when sandblasting. I thought it was the vacuum cleaner!

[@briandavern8741]

Great job! I would be interested in learning more about the gloves. Are the holding up?

[@BostLabs]

Fantastic work, sir! Subscribed!

[@LifehackInspector]

thank you sir:)

[@TopCat2021]

Impressive build and great video. I'm subbed

[@LifehackInspector]

Thank you!

[@bOOmbOOmProd]

For some the sawzall is king for this man the angle grinder holds that crown.

[@LifehackInspector]

ahahahah)))

[@kevvoo1967]

Very impressive. !00%

[@canonize9241]

Im over here going "oh looks like a fun idea......but what was that song in the car at the begining??!?!?" Edit: Just finished the vid. Thumbs up that was a fun build watch!

[@LifehackInspector]

Thank you! And the song in the car was "Rammstein - America"💪

[@ИринаЛеонова-э6р]

Молодец!)

[@petergrunendahl8799]

Absolut Mega. Deutsche Qualität, kein minderwertiger Scheiß „Made in China“. So einen Sandstrahler hätte ich auch gerne. Gruß aus Belgien

[@davebrittain9216]

Not sure why you would say genius. He did a nice job on the cabinet but lets face it most of us could if we tried. A genius would be doing stuff we can't do.

[@Jose-yq9vl]

you're right

[@LifehackInspector]

I'm not a genius, it's just KZbin rules :)

[@fila1445]

He is driving Skoda Octavia mk2 That just screams genius !

[@cmaleixo]

Great project 👍 Please, what is the center hole at the right side for ? Congratulations from Brazil.

[@phizzelout]

man I love it when people repurpose sh*t and build something else

[@shado9779]

You also could've added rubber padding inside so sand wouldn't damage walls over time

[@bengrogan9710]

It's very doubtfull that will ever be a concern - If he isn't blasting directly at the side walls from only an inch or 2 away he will not be abraiding it away -And if he ever does he will have got decades out of the cab, enough to justify a better purchase

[@occasionalmotorcycling]

от жук! а я думаю куди Палич пропав, а він тут лівааачить😁

[@Johny87ru]

Красава!

[@MrBondarrr]

Умеете, могете, лайк)

[@konstantinlysich9924]

Палич, ось ти і попався))) 😊

[@Anonymous-uu6qr]

Шикарно. Сварил такой агрегат из говна и палок. Просто незаменимая вещь в автомастерской.

[@koshaz3x]

No means to demerit this guy's skill but I'm still trying to figure out what in building your own sandblasting cabinet makes you a genius. But still, as I said, nicely done, works just fine and quoting someone else below, install a foot activator for the air pressure and it will upgrade greatly the efficiency of your cabinet. Regards.

[@Feindflieger1]

Subscribed

[@jacobwilliams8651]

Why not accumulated from the bottom to pull sandblast medium down, otherwise it stays in the air and after a while will make it hard to see as shown in the video

[@jamesdrake2378]

I was thinking double doors to cut down on the wide swing? thanks for the content

[@bengrogan9710]

The issue then is that you need to deal with sealing the seam between the doors - this is why many hung either the front down or the top up

[@jamesdrake2378]

@@bengrogan9710 I see that makes sense, thanks again for the content.

[@ncsoft5]

Хороший крафт но свет внутри надо было длинную светодиодную палку купить она бы отлично освещала

[@pol_enota]

Я б провода на выключатель и светильник внутри бы проложил в гофре. Так эстетичней бы выглядело. Не порвет же песок гофру?

[@thompsonevergreen8006]

Someone's been watching Edgar wright movies

[@procomp0]

Круто) во сколько обошлось?

[@forestfabio78]

Good edition, put ASMR to ger more views

[@pavellyashenko3946]

Особенно порадовал бак от ИЖа

[@alansmall9071]

👍🏻👍🏻😊😁

[@d.j.robinson9424]

❤

[@jw200]

what compressor you have? specs?

[@Oliversvideoss]

What blast media are you using? Real sand?

[@a1hamer]

Well i live on a scrapyard have lots of tools and time on my hands. Could rather buy this contraption on craigslist for reasonable price.

[@hubert7855]

What with that Kettel? Do you workout?

[@ZeFoxii]

Should have had it so it auto feeds back into the red tub from the bottom.

[@rescuegarage6616]

amazing skills , but really with how cheaply priced everything is today , not worth building a blast cabinet

[@JakubKlubkoSmejkal]

And in the next episode I'm building a bigger compressor :-D

[@artemugrimov566]

Привіт, Паличь!

[@ZzZ-qd1zo]

Am I crazy, or could you by a harbor freight sandblasting cabinet for way less than the cost of these materials?

[@ITBlanka]

0:25 what music is it, please? edit, 0:38 too!

[@Oleg-zw4ij]

Парень з України!!! 💯

[@antoniocabral1551]

👍👍👍👍👍👍👏👏👏👏👏👏🙏🙏🙏🙏

[@nabassu]

„This man is a genius!” „He made a sandblaster from old bottle like half of the world did multiple tomes!”