Homemade Professional Sandblasting Cabinet - DIY

[@kentuckytrapper780]

Built like a tank, can't buy this kind of quality in a store. Great job.

[@IronManRestoration]

Thanks a lot

[@lrdisco2005]

Expert build and that level of quality disappeared in the uk 40 years ago. No one wants to pay for quality when inexpensive poor quality equipment is freely available. Respect.

[@J0hnSell]

Im currently half way through building a heavy duty one myself and been CONSTANTLY coming back to this DIY video for help. Thanks again for the awesome video!!!

[@IronManRestoration]

Good luck!

[@mrmidnight32]

Wild, I literally was thinking of how to make one of these in my head today. Didn’t even say it and an hour later this comes up in my recommended.

[@IronManRestoration]

Woooo This is Artificial intelligence.

[@scottbrown8142]

Great job, I was going back and forth on whether to make or buy… you’ve proven it’s completely possible with out a great deal of equipment to produce a quality unit.

[@IronManRestoration]

Thanks buddy

[@xtremluck6260]

What a fantastic job! The amount of detail you showed is excellent. It's the kind of video a hobbiest can try building themselves. The only thing missing are the blueprint plans which you could sell I imagine if a link was available. Will be checking out your other videos seeing the metal bender has one to watch....thanks.

[@obywatelkonsument7349]

Mate, i think you have a FULL right to call your design and build "proffessional"! It was a pleasure to watch your video. I have to think about blasting cab like this. Thanks!

[@IronManRestoration]

Thank you cheers

[@joewhitney4097]

Your blast cabinet turned out nice. It appears to work very well. Thanks for sharing.

[@davidfrank2824]

You really did a great job. That looks better than the one I bought from the store. You have better lighting and a better window. I love how you put the gasket on the doors.

[@IronManRestoration]

Thank you David for appreciating

[@teleluxcereris3125]

Questo progetto è qualcosa di veramente fantastico, realizzato in maniera eccellente in ogni dettaglio. Solo con l'esperienza e con i giusti attrezzi si possono giungere a tali risultati. La sabbiatura è a dir poco eccellente. Complimenti!!! Un saluto dall'Italia!!!

[@DraMazGaming]

Great project!! Do you have any scheme available for someone whos trying to do the same cabinet?

[@МитяМороз-р2к]

Outbox lamps on top is the best idea, Great.

[@marshal7102]

Now that is a BUILD, Great Craftsmanship and attention to detail. And works like a factory built Machine GREAT JOB!!!!!

[@IronManRestoration]

Thank you for apriciating

[@fireinthehead4280]

I loved every second of this. Awesome work and a big thumbs up for that homemade bender.

[@IronManRestoration]

Thank you 😊

[@Restorationcircle]

You did a great job I also want to make this sandblast cabinet what are the dimensions.

[@Carlitosway211]

Man that turned out fricking bad ass!

[@LariFariYoutube]

This is an amazing project. Quick tip: You should put a (small) piece of rubber mat under the the worpiece / workarea.... Otherwise your sheetmetal mesh will wear out very quickly. Other than that, the thing is working great. Even tough, i would not paint it red.. ;) Well done... Greets from Germany

[@IronManRestoration]

Thank you and also thanks for good advice

[@pistolpete65]

This is very similar to the cabinet we used to use for cleaning parts from Mauser 27mm gun parts, was also very much used as a side line for cleaning alloy wheels. Good DIY cabinet, keep up the good work.

[@IronManRestoration]

Thanks

[@RandomHands]

Would you make one for me :) Good job Mate MashaAllah.

[@IronManRestoration]

Yes brother I can make one for you and that will be a gift for you from Iron Man Restoration

[@IronManRestoration]

Ok I will

[@connexphiri3708]

@@IronManRestoration i need one too please

[@joebrone4972]

You are SO awesome to watch.... Would you make me one too? Money is tight but I will PAY you as much as I can. I live in the Bronx, NY.

[@kurtmelander5103]

One of the most impressive DIY builds I've ever watched. It sure would have been nice though if you would have sourced some of those parts that you used for those wanting to make something out of other materials, While I have a welder and electrodes, I'm nowhere proficient enough and little time to learn, I'm a Cabinetmaker, so I can do plywood one without too much trouble but would love to know where to get some of the fittings like the return mounted on the bottom, don't know what it's called so I wouldn't know what to look for, same with the grommets for around the glove openings, Those type things are what I need to find.

[@Gerrit-Max]

I'm definitely gonna have to build one my self now. I've got several items that need sandblasting but can't find anywhere to have it done at a reasonable price.

[@clucci5094]

THIS IS AWESOME! Some sandblast cabinet manufactures explain why you shouldn't build your own cabinet as the quality is inferior. HA - SEND THEM THIS VIDEO - NO ONE builds them like this - NICE WORK BROTHER!

[@IronManRestoration]

Thank you so much for appreciating. Have a good day

[@dwyanejetersr6470]

You sir have extraordinary talent, really enjoy watching you work, outstanding!

[@IronManRestoration]

Thank you so much 😀

[@faizanjunaid1392]

Well done iron man sand blasting result is awesome. The sand blasting result look like silver colour and i cant see this type of home made sand blasting cabinet in other restoration channel you did a great job professionally & also using professional tools. 👍

[@IronManRestoration]

Thanks

[@jacquespoirier9071]

truly a nice job, unless you need a bigger unit, there is commercial units that are from a very similar design, I've used such a unit that I modified to suit my application, in fact, I've designed and built a bead injector very similar to the one you use and I fabricated an enclosed light unit that I installed inside the cabinet, the major difference is that I've cancelled the air shut off valve on the blast gun and I've installed a foot operated valve outside the cabinet because the experience showed me that beads blocked the air shut off valve in open position.

[@IronManRestoration]

I appreciate you buddy

[@patrickperry6945]

Very well done! Filming the use of it was also well done. Crystal clear.

[@IronManRestoration]

Thank you cheers

[@saveriobasta1791]

Well the white crystals sand works, you sandblasted the red painted grill too... doh! Thumbs up!

[@IronManRestoration]

Thanks

[@bobjanis2091]

Excellent job, nice to watch a truly skilled craftsman

[@dale9896]

Great job mate, well done. Crystal clear blasting.

[@IronManRestoration]

Thanks

[@drmosfet]

First time I've seen something interesting built with a buzz Box welder on KZbin👍

[@IronManRestoration]

Thank you

[@BG-hg7cp]

Awesome work. Material count probably coulda bought 3 or 4 from harbor freight but by tike this one needs replacing ud probably go thru all 4 harbor freight ones and some. Subbed for thr great diy content

[@IronManRestoration]

Thank you

[@BG-hg7cp]

@@IronManRestoration no problem. Hopefully I'll get to make me one soon for some of the project ideas iv got

[@obg6446]

Real good craftsmanship well done

[@IronManRestoration]

Thank you

[@alexday2373]

Solid work mate.

[@robertgilmour1903]

Perfectly clear, a thumbs up from me.

[@IronManRestoration]

Thanks Robert

[@3DPeter]

i also made my own sand blasting cabinet. I found a stainless steel under table with the perfect funnel, so all i needed to do is built the cabinet on top. What i don't see in this video is a filter screen in the funnel ( a fine mazed mosquito net), and i made that in mine, so that bigger chunks of debris will be filtered out and won't block the hose that sucks up the glass beads.

[@restaurandocoisasvelhas]

Excellent work my friend.

[@giovanni7426]

Lavoro a dir poco eccezionale super professionale complimenti.

[@IronManRestoration]

Thanks

[@Melnikov_Yuriy]

Шикарная, пескоструйная камера!!! Палец вверх🔝🔝🔝

[@redkachina]

superb workmanship

[@IronManRestoration]

Thanks

[@djamelhamdia134]

24:15,the sandblaster sandblasting the sandblaster.

[@ProPotato]

The first fab video I've seen where someone still has the guard on the grinder =) Thanks for the build! Buying a large cabinet gets expensive, inspired to draw and fab my own to my requirements for my shop now. And doing all this with a stick welder, nice one mate!

[@ToreDL87]

Cut myself with a grinder enough times to keep the guard on at all times now. If I can't reach with a guard on = I'm using the wrong tool.

[@kitchenwithrashi4688]

Beautifull video parfact 🌷🌷🌷🌹🌹🌹🌹

[@exhaustfumes927]

Props for stick welding that

[@andrewt.c.wilson808]

watched 3 times ... awesome ... subbed

[@IronManRestoration]

Thank you

[@dimi5928]

JUST WOW!!!!!...SPEECHLESS.......

[@eslanderson5519]

Amei todo esse tutorial. Excelente Obrigado

[@biggsteve1975]

Very nice build. That ax head gonna need a little work though.

[@IronManRestoration]

Thanks

[@alonsobrosmann4300]

After the metal parts have been sandblasted , can the sand be reused or is sand added to the system again ?

[@IronManRestoration]

Sand recycling

[@LAVINCHO1]

Muy buen trabajo lo felicito, una consulta a cuantos bar realiza el arenado?

[@wannesvanhoudt6429]

really nice stickwelding. impressive

[@IronManRestoration]

Thanks

[@jhscheppele2448]

You could use a brass wood window lock for the hopper dump door.

[@foxaholic4228]

Damn dude Great craftsmenship, I would gladly buy your sandblaster, over one of those cheap and expensive turds in a store. Great video ! Your very talented.

[@IronManRestoration]

Thanks for appreciating

[@foxaholic4228]

@@IronManRestoration If someone asked you to build them one ,what would you say ?

[@marcioferreira5559]

CONGRATULATIONS, this is wonderful work!

[@IronManRestoration]

Thank you cheers

[@ann3_fr4nk_2k7]

Cristian Casoni for 5 months ago: CONGRATULATIONS, this is wonderful work!

[@MirceaD28]

Work of art. Superb job.

[@IronManRestoration]

Thank you mircea

[@bobbystanley8580]

Show off! Awesome job!!!

[@IronManRestoration]

Thanks

[@AJ16-3]

Awesome work. Question, how did you run your hoses inside? Did you seal it ? What size hoses and connectors did you use for the sand hose? Thanks

[@IronManRestoration]

6 mm

[@ОсторжноунегоРУКИ]

Great job. How much air pressure is supplied to the gun? How many millimeters is the gun nozzle? What is the capacity of the compressor?

[@IronManRestoration]

5hp air compressor 6 mm nozzle size 80 psi air pressure

[@jianny13]

Nice job my friend I need one for my here in Greece for me

[@IronManRestoration]

Thank you cheers

[@kitchenwithrashi4688]

Beautifull video 🌹🌹🌹🌷🌷🌷

[@harcruiser3809]

its great your home made sanblaster,i like it very much,you may also give some comments

[@IronManRestoration]

Thank you cheers

[@FERNANDOTADEUBRAUN]

Parabéns pelo trabalho !!! Abraço dos amigos do BRASIL

[@selatjaul9187]

Great job man.. for sandblasting how much horsepower compressor will be use and it ok bro

[@IronManRestoration]

In this video I’m using 3 horsepower but now I use 5 horsepower air compressor

[@alia176]

Excellent work building the cabinet and a great video. Your editing skills are superb as well as your fabrication talent. Thank you.

[@IronManRestoration]

Thank you cheers

[@Miricrafts]

Very nice, interesting sheet metal bending.

[@The_Absurdistt]

Absolute beautiful work. I really liked the look of the grey primer... I think I would have just clear coated the primer... but red is sexy too.

[@IronManRestoration]

Thanks

[@jhscheppele2448]

How about a materials list? This is a real talented person, many skills.👍👍👍👍

[@IronManRestoration]

Thank you

[@martinbrace7195]

Cool project and very well made.

[@ShortCircuitRu]

отличная работа! Маленькое замечание: сверло-чашка и ступенчатое сверло требуют низких оборотов сверления. На оборотах свыше 300-400prm начинают гореть режущие кромки. Тут нужна 2-скоростная дрель с низкими оборотами 1 скорости и с большим моментом. Ну и масла не жалеть, масло хорошо помогает сверлить такие отверстия.

[@DaleDirt]

Wow , that was awesome ..... Good job with doing all stick welding . That takes skill . I subscribed .

[@IronManRestoration]

Thank you 😊

[@profetamc7889]

Parabéns ! Gostei muito da câmara de jato. Só não entendi para que a bomba abaixo.

[@ApprenticeGM]

That's a terrific job on the sandblasting cabinet mate - well done and thanks for sharing. Your actual sandblaster / compressor seems very underpowered though, watching the speed of the sandblasting was painful, it was very slow and narrowly focused. Upgrade the compressor / sandblasting gun.

[@IronManRestoration]

Thanks for appreciating mate. I’ve upgraded my air compressor. Now I have 5 HP 2 CFM air compressor in my shop.

[@luizantoniocarnevali1595]

SHOW.....CONGRATULATIONS!

[@IronManRestoration]

Thank you cheers

[@ss94]

Does the pipe under the hopper need bleeder valve? What happer if there is no bleeder valve?

[@eduardocampos5044]

Amazin and profesional result!!!! 👏👏👏👏👏👏👏👏👏

[@IronManRestoration]

Thank you

[@FunkiesLOL]

Very nice solid build, and can you make you make me one of that vent ????

[@abefhkuwari7293]

alsalam alukom amazing brother keep going god bless you

[@IronManRestoration]

Thanks brother

[@lapierretube1735]

Very effective 👍👍👍

[@IronManRestoration]

Glad you think so!

[@watchit65]

Very nice video. I do not have a sandblaster cabinet nor have I used them. Does not the glass beads get contaminated with potentially larger rust flakes and without some sort of separator/filter does that not give trouble?

[@IronManRestoration]

It can be recycled 40 times

[@vinceianni4026]

Hello mister very good job well done I like it thank you Vince

[@IronManRestoration]

Thank you too

[@mladenfuntek6812]

jako dobro od prve do zadnje sekunde

[@exhaustfumes927]

Also if you don't mind I'd like a link To that table top break

[@mushenji]

This is extremely good

[@warek97]

Dzień dobry. Czy jest możliwość kupienia takiej piaskarki .?

[@wajoodfacts5414]

Nice Work Faisal Yar

[@IronManRestoration]

Thanks for appreciating

[@giovannidimartino4550]

Beatiful job. Please can you make a tutorial or a list of materials ? You could make rally happy us. Thanks a lot

[@IronManRestoration]

Yes, soon

[@hugoguimaraes3698]

Great job. Can you tell me if a 4Hp 270 liters compressor do the work? Can I work fast with this compressor? Thanks in advance.

[@IronManRestoration]

This is 12 cfm air compressor which is not enough. At least you need 5 hp 20 cfm air compressor which will provide 95 psi continuous pressure at 5 mm nozzle.and if you want to do work fast you need more big nozzle and big compressor

[@hugoguimaraes3698]

@@IronManRestoration thanks a lot.

[@tommyboi0]

Would you mind providing more detail on mesurements etc?

[@IronManRestoration]

I have no drawing

[@jasimalhosani8980]

Great work nice one for restoraiton projects thank you for good video .

[@IronManRestoration]

Thank you cheers

[@IA0698]

What brand and model of pistol was used?

[@r-joule]

Hello. Great work. What size is the angle iron please? Thanks

[@IronManRestoration]

5 mm

[@r-joule]

@@IronManRestoration what width?

[@shahidabbas-qp8ou]

You did a great job bro

[@timhendrickson515]

I would strongly suggest a dust mask since most paint has lead

[@tomfull6637]

Nice work. New subscriber earned! 👍🏻

[@IronManRestoration]

Thank you tom

[@MessyWorkshop]

Awesome job 👏 !! Exactly that i am thinking of build.

[@IronManRestoration]

Thanks

[@hellbound1981]

Awesome work mate. I would love to get the plans and build one of my own..

[@felipekrt]

Amazing project! ❤️❤️❤️

[@IronManRestoration]

Thank you

[@mickgiard1441]

wow nice job

[@IronManRestoration]

Thanks

[@thisisrestoration1983]

Crazy project!well done bro!

[@claudneirodrigues5983]

Muito bom.deveria vender as partes como um kit!

[@waynehoch3009]

I'll take one!