This Milwaukee Tool Accessory Drove Me To The BRINK OF INSANITY!

Yeah, this is a must have Milwaukee Tool Accessory for anyone that uses the all new Milwaukee Tool Framing Nailer, but this Milwaukee Tool Accessorry nearly drove me insane!
Buy Here Milwaukee M18 Fuel Framing Nailer Magazine Extender
shrsl.com/30jo4
Join The Tool Review Zone Discord Channel Here / discord
Become a Toole Review Zone Channel Member for exclusive perks here / @toolreviewzone
M18 FUEL™ 21 Degree Framing Nailer Extended Capacity Magazine
M18 FUEL™ 21 Degree Framing Nailer Extended Capacity Magazine
The Milwaukee® M18 FUEL™ 21 degree framing nailer extended capacity magazine provides all-day productivity by increasing nailer magazine capacity to accept two full strips of nails. This results in less downtime due to reloading and a more productive day. This accessory is compatible only with Milwaukee's M18 FUEL™ 21 degree framing nailer (2745-20).
Accepts two strips of nails
83 nail magazine capacity
High strength magnesium for durability
Compatible with M18 FUEL 21 degree framing nailer (2744-20)
Nail lengths: 2 in. to 3-1/2 in.
Nail diameters: .113 in. to .148 in.
Bottom loading design
Nail collation angles displayed on tool
Simple, quick installation

[@snowgorilla9789]

Looks to me like the designers have never used one why the hell ALMOST two or ALMOST three ?

[@swfcompany8641]

Exactly. I fall in the now and then category but that’s super stingy. They want you to buy the accessory and still be pissed off to make you want to buy their next model that includes 2 or 3.

[@notchipotle]

can't wait for milwaukee drum magazine 😂

[@PatrickLeitelt]

I like how you pulled that bad boy out of the freezer for the video! Great addition to the tool crib!

[@donayre21]

Could you do more of this type of video. It would be great to hear what new tools/features you dislike the most.

[@AntonioClaudioMichael]

Lmfao at the workout routin @1:40 @ToolReviewZone

[@ToolReviewZone]

I really pushed it hard bro 👊

[@AntonioClaudioMichael]

@@ToolReviewZone 👊

[@josephmalinowski6817]

Question when loading the nails into the clip there's no lock mechanism when you pull I don't know the name but the thing you pull the slide back then you could slide the nails into the club usually is a little hook that locks it this way you can grab a couple of nails and load them that you just released that thing and it just slide you automatically to the last nail

[@philipdove1705]

I spoke some French all summer long framing withat tiny mag.always ran out right when I needed it. I finally got the standard double clip mag a month ago sure makes a difference!

[@ToolReviewZone]

Thanks for the feedback Phillip!!!

[@duncdunc76]

Another good one TRZ👍 Im a Dewalt platform guy but just love watchin tool reviews from entertaining Dudes like yourself! And of course us tool peeps are always tempted by the newest bestest tools lol. Gotta say though why in the heck wouldnt Milwaukee just make the magazines a bit longer to fit 2 on the small mag and 3 on the large mag, Weird! Unless there are other brands of nail strips that do fit 2 strips?

[@ToolReviewZone]

Thanks for the comment and feedback Sean!!!!!

[@AntonioClaudioMichael]

Been wondering if you can put the 30 degree mag on the 21 degree nailer or do you have to buy both the 21 degree nailer and the 31 degree nailer on the bottom looks like you can put both mags on the same nailer but not sure it can do it @ToolReviewZone

[@AntonioClaudioMichael]

The end was just hilarious 🤣 @ToolReviewZone

[@ToolReviewZone]

Hahaha, thanks Antonio!

[@michealrobinson]

Whoop whoop! 100k!

[@ToolReviewZone]

Yeah buddy!!!

[@rickcowgillxxwe1461]

Just subscribed mate, keep up the good work

[@ToolReviewZone]

Welcome to the channel Rick!!!!

[@adamsolomon8346]

Hey Clint! Have you ever reviewed the 4 in 1 Milwaukee drill driver? They stock them over at Adzy’s Goods

[@ToolReviewZone]

Hey Adam. Yes sit I did. It's a great tools, and I actually used it the other day for a tight area I had to reach

[@bluemantom77]

If you we doing your roof you good to go with this Milwaukee accessory you doing the trim work in your house

[@jamesrogers4674]

Have you tried a 30 degree mag on it? I've seen videos of people putting a 21 mag on a 30 nailer but not starting with a 21 degree gun. I'm hoping it's possible. I bought a 21 degree gun a few weeks ago because it was a good deal, almost didn't buy it because I wanted the 30 but when I saw I might could change it I decided to buy it anyway. Got it for 185 new in box. Got 15, 18 ga same day love them. Just got the 23 ga this week and it's the coolest little gun.

[@josephmalinowski6817]

You really hit a hundred thousand congratulations brother that is a great achievement too bad you're locked up and went crazy I always told you but they have a special jacket for you with zippers and straps that tie in the back don't say I didn't warn you LOL it's crazy that I've actually said that it's not like you actually got committed but this just funny all joking aside congratulations on hitting a 100,000 well deserved next we got to try for 200,000

[@ToolReviewZone]

Hahaha, I should have listened to you brother 🤣

[@josephmalinowski6817]

@@ToolReviewZone 📸😎📸👍👊 that's freaking awesome you hit a hundred thousand congratulations well deserved brother well deserved 🍻🏆🇺🇸

[@ToolReviewZone]

Thanks brother!!!

[@ruinunes8251]

I already smeeshed that like button 😂😂I hope you are happy with it. 😃

[@ToolReviewZone]

Hahaha, thanks for the SMEEESH Rui!

[@colekidd2]

Do you think it would fit on the metabo looks really similar

[@Tjamesknight]

Use Paslode nail racks. You can fit more nails and reload less. Solid video!

[@ToolReviewZone]

Thanks for the feedback Travis!!!

[@Tjamesknight]

@@ToolReviewZone I hope you get up to 100k!

[@ToolReviewZone]

Thanks brother. Almost there 👊👊👊

[@Tjamesknight]

@@ToolReviewZone Congratulations!!!

[@ToolReviewZone]

Thanks Travis brother 👊👊👊

[@joshuasutton2163]

I think having the 30 degree nailer may have solved your problem of not getting two strips in there. You can get more nails in a paper tape strip. I don't know if that would have let you fit in two strips, but it's possible.

[@josephmalinowski6817]

Lol that's great that was my point about the Milwaukee one key super Sawzall the reason I stayed with the brushless fuel because of the weight the difference in weight was almost 4 lb and then also add a battery it becomes heavy especially if you're using it most of the day👍🍔🍟🌮🍗🍻🍉 haha you got your beef jerky these are all the foods I have plus a cold beer I'm only joking but I just had lobster bisque soup so nice like 😎👊🇺🇸

[@cvrbon6]

Is it worth adding weight to this already lofty beast though?

[@theyardhero4049]

TRZ almost at that 100k mark. Less than 300 subs to go

[@ToolReviewZone]

Almost there brother!!!!

[@chrischevalier6107]

Better get some of these high capacity assault magazines before the nannies ban them

[@JJ-lu6mg]

The original one should have been able to fit two racks of nails all they needed to do is literally make the smaller one a couple inches bigger. Then they still could have offered the larger magazine fit 3 racks of nails for guys who are framing all day.

[@dantheman9395]

Its like the 10mm socket. Damn thing just disappears. Lol. I wonder why they just didn’t make that much longer to accept 2 whole clips. Conspiracy theory 🧐🧐🤔🤔

[@ToolReviewZone]

Lol, I'm thinking the same bro haha

[@jasonbabila6006]

That's real nasss like 🙌🏽💪🏽 smeesh that like button 👀👉🏽 👍🏽

[@ToolReviewZone]

Hahaha, thanks for the SMEEESH Jason!!!!

[@javierdelapaz9105]

Extended magazine not available in California 😂

[@ToolReviewZone]

🤣

[@alanmullock381]

Who forgot to measure the nail strips?😲😲🤣🤣🤣🤣

[@kennedymcgovern5413]

I give it three months before this is illegal in California.

[@ToolReviewZone]

Bahahahahaha 🤣🤣👊

[@kc0lif]

if you had m18 12ah battery real nass like 👍👍

[@thomaswidget6528]

ok, this video is informative for non tools nerds :D but please, don't put your finger on the trigger, especially without safety glasses! this tool stay a gun, not a 50 bmg but still...

[@OneMHz]

Seems like garbage to be so much longer than two clips but not long enough to fit three. Just like a standard mag should have fit two. I’ll keep my Hitachi - that was made by people who know the tool.

[@larryfoster2628]

Sorry I disagreed they should’ve use the longer one you don’t even need to spend the money if you’re not going to be using this guy often so it needed to be originally that size I have to purchase one and send the other one back to Milwaukee and tell him shame on you don’t get me wrong I love Milwaukee

[@konamanstudio2447]

☃️🎄🍻🍺🎄☃️

[@bergeronstudios2]

Please for the love of God, get a lapel mic. The echo and reverb in your videos makes them painful to watch. The content is GREAT. But your audio needs some work.

[@ToolReviewZone]

Lol, I just ordered one five minutes ago based on this comment 😉👊

[@bergeronstudios2]

@@ToolReviewZone hell yeah! I look forward to seeing your work on the next level. Keep it up 👍