This Mod Allows You To Reliably Double The Power of The B58 - CSF Intake Manifold (M340i, A90 Supra)

My Mk5 Supra is about to go 0-100 Real quick... Literally. With so many plans to increase the B58's power it's time to prep the engine to handle it all. Proper cooling is something many people choose to ignore when increasing their car's power, but they shouldn't! In today's video I will upgrade nearly every cooling part that my Supra comes with and explain to you guys why it's important.
Cooling upgrades installed in the video:
CSF Intake Manifold - bit.ly/3Co6j8C
CSF Heat Exchanger - bit.ly/3Et9Mpf
CSF Transmission Trans Cooler - bit.ly/3VhooxO
CSF Aux Radiator - bit.ly/3RRfEvs
Shop all BMW performance mods and merch: vehiclevirals.com/
Other Supra Mods:
Fi Exhaust - bit.ly/3AX995M
Titan-7 Wheels - bit.ly/3RpKPyG
All Supra Episodes - bit.ly/3cRw2h6
Why These Might Be The Best MK5 Supra Wheels On The Market - Titan 7 T-D6
• Why These Might Be The...
We Made The Loudest MK5 Supra Ever! - Launches And Dyno Pulls
• We Made The Loudest MK...
Business Inquiries: [e-mail]
Follow me on social media!
Facebook: / vehiclevirals​
Twitter: / vehiclevirals​
Instagram: / vehiclevirals

[@Mando_i]

At the same time the cooling system in these cars are very well made, same with 440/340 etc anything with a B58 the cooling system is great, every N54 owner wishes they had a cooling system like the B58’s. A downpipe and a tune and the car is more then capable to handle that type of power!!!, my bro has his 340i FBO full E85, it literally gets cooler when im going 90+mph versus going 60 mph, it’s insane I see it with my own eyes the meter going down, it’s really insane how good the cooling system is, not everyone has 4K just for a manifold not including anything else your going to need😂and most of these mods aren’t required until your pushing 600hp + but I know you, big turbo kit coming soon, it’s going to be hell👀😈

[@ericopryatov7985]

I agree, that manifold is be overkill for FBO.

[@ProcTech]

Yup by the time you need this manifold, you'll have pi, full frame turbo, and upgraded trans.

[@lucasschema6874]

I'll admit i havent watched a vid of yours in a bit and i come back and see you wrenching all this by yourself. Thats sick man, even if you got a bit of help thats cool to see you doin all this on your own (i wouldnt wanna do the intake manifold by myself either 😂)

[@VehicleVirals]

I always tend to do smaller jobs, especially off camera. Big stuff, I shy away from because I simply don't have the time for trial and error.

[@mervyndong7281]

Damn. That intake manifold is beautiful. I have a 440 also b58. Really want to put that on one day🔥

[@ChrisChaos209]

Brooo that color go craaazyy!! 🙌 looks more like Cerokote than basic powder coat 🔥🔥🔥🔥

[@kontext4277]

The best BMW engine hands down 🔥🔥🔥

[@therealaa24]

V10 S85 is the best sounding though.

[@chriscaine1776]

The one in the A90 was actually heavily redeveloped by Toyota, which is why with the exception of the manifolds the Supras can handle alot of power

[@Mp-jw1qg]

@@chriscaine1776 no, the b58b30m0 is the original b58, 2014, they redesigned it in 2016 and renamed it the b58b30m1, in 2020 they switched to an internal exhaust manifold in the head, the b58b30c and the b58b30o1 are the toyota supra versions and both are the same as the b58b30m1. toyota developed nothing on the engine or transmission.

[@weyo14]

S58 ?

[@chriscaine1776]

@@Mp-jw1qg the entire valve and cam assembly on the B58 thats in the A90 supra was reworked by toyota over the course of several years and made better power out the box, not to mention the pistons in the B58 that the A90 got were used toyota's manufacturing process instead of the process thats used in the rest of the B58 engines that BMW utilizes. It was argued for maybe 2 months at best way back when the A90 first released, and was put to bed rather quickly by guys like papadakis, as well as the team from TRD who did the development. Now the interior and suspension is all BMW development... also the ZF transmissions arent specific to BMW, and to prove to that point the ZF6H/ZF8H transmission that youre refering to, actually was the same trans being used by dodge they are the German equivalent to the Tremec transmissions out of the states. Cheap to make, fit everything, reliable in heavy use applications. They rode a fine line between shouldve just done it themselves, and makes sense they started with parts that already existed.

[@georgemutale8947]

Lets gooo!🔥 It's always nice to see vehicle Virals upload performance mod videos!🔥

[@electropalsceo]

thanks for sharing , more than what i can do, but definitely need to hire a special mechanic and body guys to do this type of upgrade. nice work!!

[@groundrodshorts]

Under rated video. Thanks for the info!

[@GXZ70_]

So sick, had to subscribe 🔥

[@suprasupra718]

So thanks to you I finally got my supra thanks again for dope content 😊 appreciate it

[@romydial]

Love the bass line on the music bro 👌

[@cheezybread7783]

finally a video that tells u how to make ur BMW reliable.. btw how many bmw have the B58 engine?

[@anonymousqtrdude8061]

Just received my red csf manifold today , hope to make good numbers with it 🙏🏽

[@Carlos-ro4ji]

Wow I most definitely need to get a engine oil cooler for my n54.. Thanks for all of your very detailed, and informative videos. Tigere…

[@becausereasons41]

You overheat? I have a stock radiator but I have a 7.5inch intercooler. I've o ly gotten to 225 degrees idling in traffic, stays at about 200-210 when I'm getting on it. N54 e90 08

[@Carlos-ro4ji]

No I don’t overheat I have 5 inch intercooler, and I’m not pushing that much power.. I’ll be installing catted Dp’s soon since here in Georgia we have emissions..

[@becausereasons41]

@@Carlos-ro4ji that sucks, I have no catalytic converter, or muffler cause luckily we don't have emissions! Bitch is angry and loud!

[@Carlos-ro4ji]

@@becausereasons41 it’s all good buddy.. Once I install Dp’s catted I’ll go stage 2. I’ll be fine just a little boost feels great. Lol I’m not racing or anything so I will still get a growl 🐯 and pass emissions..

[@KingDiamondBones]

@@becausereasons41 lucky ass

[@Eliasccv14]

Crazy to think all that air goes through those holes!

[@aosdnasdmas]

Man these videos are giving me too many ideas for my 340 🤔

[@kingcharger3412]

It’s litty with the content 🤙🏾🤙🏾🤙🏾🔥🔥🔥

[@alanle249]

You can route the evap system below the manifold.

[@LichaelMewis]

I don't think it will take a lot longer for a larger heat exchanger to get heat soaked especially in hot ambient temperatures. The better option would be to put a chiller system on that takes cooling from the AC system to drop the intercooler reservoir temps ice cold.

[@RantzCore]

Kudos Cristian with adding a more Toyota reliable cooling setup versus BMW plastic brittleness. 👊

[@neilwalker8686]

It is csf not toyota….

[@raldyjimenez3319]

Very nice…will that manifold and csf heat exchanger and radiator fit a 1st gen 209 B58 grand coupe

[@ninjastriker0137]

Nice video bro

[@aznerol0770]

Right on!

[@soontianlow6264]

Are you able to pull the low pressure coolant cap after letting it sit for few hours after driving? I can’t do that on mine, coolant will just spray out, seems like there’s excessive pressure being built up when i let it sit when it’s hot. If the engine is running then i can pull the cap no issue.

[@Drupra88]

Great video. Love that intake manifold. Do they do other colors?

[@VehicleVirals]

We can get you any color you want. Check out our website.

[@Drupra88]

@@VehicleVirals good to know. Thank you. Hopefully next few months I’ll be ready to order

[@mresab1997]

Are you able to place the stock engine cover over the new manifold for that seamless look?

[@canadianbacon372]

Those two side rads, do they sell a new, bigger inlet duct for somebody who will cut the rest of the little holes in the bumper? Almost looks restrictive how small that hole is and how big it could be. Thanks.

[@SicSemperBeats]

lol I didn't expect to be surprised by the super manifold's cost, but I definitely was. I assumed it would be around $2k-2500. $4300 is pretty insane though

[@xXspark365Xx]

Doesn’t make sense. Literally a whole turbo kit for that price

[@JF-pf9hx]

If you are not very ambitious, there is some ecu tune for b58 that makes 500hp with stock engine and exhaust.

[@DenGuleBalje]

@@xXspark365Xx could get a whole car for that price

[@VehicleVirals]

I knew the price point would be a major talking point. Think about this. Even at that price point, CSF has a hard time keeping them in stock.

[@xXspark365Xx]

@@VehicleVirals because they don't make much?

[@kmartkid6312]

I would recommend if cooling performance is your main goal to switch to a more water mix for your coolant. Where you live should not get below freezing. You can do 15% coolant 85% distilled water for engine and probably straight distilled water for the intercooler loop.

[@carmello000jp]

Does it cool more that way. I’m in texas

[@kmartkid6312]

@@carmello000jp Yes 50 50 coolant has less thermal conductivity than straight water. water wetter performs better but has mixed reviews. max performance go straight water in non freezing areas.

[@juliofigueroa5367]

All those wires and hoses 🤯

[@hexagonosaurus5848]

For anyone wondering, the intake manifold is $4300

[@tickandslug]

Jesus Christ. You can get a beat up 335i for that much

[@Vgk36]

@@tickandslug yeah and it won't be driveable until you drop another 5k so no . Not the same thing 😂

[@HargunSV]

yeah this is for people wanting to run 700+ hp. if you want to get any car to 700hp you’re gonna need to spend money.

[@hexagonosaurus5848]

@@HargunSV 4k gets you to almost 600hp with these b58s 🤦

[@SavageBunny1]

@@tickandslug I sold my 07 6 speed manual, new clutch, complete new OEM cooling system, rebuilt WPC treated turbos, every single gasket/O ring was replaced, engine had 105k miles on it, Injectors where index 11's, HPFP pump was newer replaced under warranty, the WPC treated turbos made a huuuge difference, sold it for $5,500 3 years ago, even at that price it was hard to sell, it was mint interior and put, today it would be worth $10k.

[@benny.b58]

How do you end up deleting the evap system. Interested in doing the same!

[@SavageBunny1]

Companies doing R&D on B58's and coming out with parts like it's a cure for covid.

[@donelfasi3201]

factsssss

[@gochi6542]

I need to stop procrastinating and install all of the cooling parts I spent all that money to my e46. Been seeing everybody and they mama do cooling upgrades so I think I’m just gonna bang it out soon.

[@soroushyz6502]

will you do the HKS body kit for the supra?

[@milesjansen2165]

So with the CSF manifold and port injectors you can make the car dual injection, right? It's in addition to the direct injectors, not replacing them? Also how much does what we see here differ from the cooling system on the M340i with the B58 TU1? Great video and thanks for the details!

[@VehicleVirals]

You're adding 6 additional injectors, so 12 total. You're not replacing DI. Same cooling as the M340i. Identical setup.

[@jackvanhaverbeke1363]

“Just look at the thickness” 🙌😂

[@user-pu7lu2qh1g]

Yo my man . My a90 intake temp is always 110F-140F on a sunny day ..is it too hot ?

[@nehemiaslabrador2288]

What’s the torque specs on the tb to intake mani?

[@pawelludew291]

What was the oem IAT and after upgrade?

[@wezkerlim]

awesome review! seems like the rock guard for the heat exchanger doesn't cover a lot of surface area, maybe that's just me. is the thermal coating permanent?

[@VehicleVirals]

I thought the same, but it's only covering the exposed area. The rest of protected by the bumper cover itself. Not sure what you mean but permanent. But assuming you wanted to strip the color and go for another cover, you can.

[@wezkerlim]

@@VehicleVirals oh I see. ppreciate the response! i was just wondering if the thermal coating fade over time & lose it's effectiveness

[@VehicleVirals]

@@wezkerlim I don't see why it will. Unless you're tossing the charge cooler around or scratching it up.

[@aarongarner8452]

The beautiful cover ya

[@jaya6454]

Nice 👍🏿

[@ScionTC2003]

Powerful supra ever 💖💖🙂🙂🏁🏁

[@porschelover04]

How much effect would this have on a lightly modded B58? I know that it's typically used as a supporting mod for big turbos, but how does it do on a relatively stock car at adding power on the top end? I'm hoping to find a solution that gives power to redline and maybe allows me to rev it a bit higher, without delving into all the complications of a big turbo setup.

[@khoa2k123]

On a lightly modded b58 you honestly wouldn’t need any of these parts. Just the heat exchanger at most.

[@Need4Built]

I’m an Audi fan boy, and this made me jump out of my seat 👀 wish CSF touched the Audi platforms

[@avery4528]

I hope the Gen 3 comes to the Supra. Port injection front he factory and designed more around serviceability

[@ahmadmorrow2749]

Not sure if you’ve done the video but would you recommend a 440i as a first bmw? Would love to drive it a lot maybe even daily in but a bit hesitant

[@porschelover04]

My M240i was my first BMW. In terms of powertrain, it's fantastic whether you go manual or automatic. If you do go manual though, look out for the 2nd gear synchros. Bad synchros can be identified with a crunching gear grind sound when shifting gears, despite the clutch being fully depressed. It's more noticable when shifting quickly and at high RPM, but will get worse with time. In terms of chassis, it's a great daily. The steering is a bit numb and the sound is a bit lacking but it's a fantastic cruiser, even in 2-series form with the short wheelbase. It also packs a lot more room than you'd expect, especially the 4.

[@ahmadmorrow2749]

@@porschelover04 def going for the auto, and thanks! Coming from a 2016 Mustang gt and currently driving a 2018 Acura tlx aspect, this seems like a nice mix

[@joshuakitson9727]

Will it work on a f32 440i?

[@typedrew]

Do an fi interchiller. They’re doing a Supra kit right now

[@omerkurt9406]

Carbon Trunk on the E46?

[@luisvejar4170]

How much power did it make?

[@jakemaddox76]

How much can the stock drivetrain take (tranny, driveshaft, axels, diff, etc.)? What are some of the common upgrades with regard to drivetrain? This is awesome btw. Thank you!

[@VehicleVirals]

Honestly, mixed answers out there. Watch my newest video where the car is making 730WHP on stock drivetrain components.

[@jakemaddox76]

@@VehicleVirals That was actually your first video I watched and subscribed immediately. 🙂 I didn’t hear you mention stock drivetrain, but I was wondering. I guess you’ll know when it breaks lol. I am 47 and had a 3rd gen RX-7 20 years ago. I’m looking at getting back in the hobby and looking at the Supra because it’s relatively inexpensive to acquire new, compared to some of the other options I was considering. Appreciate the videos and any input going forward!

[@shaunupper3161]

I'm in a BMW M240. The ZF8 starts slipping around 600WHP (it will hold it together for a while). I've been at 550whp for years now and haven't had a single hiccup (90,000 miles now). honestly anything above 550whp on pump gas become extremely cost prohibitive. for reference 550whp runs low 11's on the M240, and high 10's on the supra

[@NeoNacho]

Can you install that manifold without tuning? I’m assuming yes because flow rates with be different but curious if it’s that far off.

[@VehicleVirals]

It can be installed without tuning.

[@alexvillalobos7137]

Why would you buy a $4,300 intake manifold if your not going to be making 800+ hp. I still wouldn’t buy this. Maybe repaint your manifold if looks is what you want

[@SHWELL11]

Who do you guys recommend I use locally to Central Fl for an E60 Engine replacement? Looking to get it done soon (Already have replacement engine).

[@VehicleVirals]

Hit us up on IG

[@SHWELL11]

@@VehicleVirals message sent.

[@Ratdweller]

Fox motors

[@Frank-vk4sv]

What engine swap 👀

[@kevin-jm3qb]

so even mikey botti switched to the EOS manifold. when are you gonna swap yours out? ;P

[@tylerking8058]

This won’t fit the gen 1 b58?

[@Bted__ever]

What's a transmission cooler? OMG I would have never known what that is LMAO!

[@smilinjoe23]

Csf vs mishimoto? Which one is better or is the $100 price difference worth it?

[@VehicleVirals]

CSF for this upgrade. IMO. And we sell both.

[@SupraSav]

The intake manifold is $6350 CAD. That is the cost of a set of 18" FORGED wheels from BCForged, wrapped in the best Michelins. Glad I'm staying stockish😅😆

[@WhoisToyambo]

Can I use the csf manifold on the Gen 1 B58 X4 2019

[@VehicleVirals]

We will have those available soon.

[@y00h000]

That’s because in general people think the pure800 is a turbo upgrade for this car Sure it’s flowing more but it’s basically a hair dryer Put a real turbo on it and you won’t get soaked Fueling and flow should be the main reason to get a manifold upgrade like this, not intake temps.

[@toddaulner5393]

If you take sll that crap off and leave it off you could integrate a fresh air scoop too!

[@alexvillalobos7137]

Aftermarket parts are so ridiculously expensive now. Even long tube headers have doubled in price or more .

[@JF-pf9hx]

My thought is an 340 Xdrive will be awesome. The supreme B58 engine is too easy to be tuned to be over-powerful for a RWD car.

[@pernellfogle7957]

Will the stock cover fit over it

[@VehicleVirals]

It will if you don't run port injection

[@modiddly1663]

B58 gives me n54 vibes it’s just you can’t compare the two because one is connected to the zf8 speed which will keep the engine where it makes power. I wanna see a zf8 n54 together

[@robfrmny21]

Those plastic hose ends will fail over time as well

[@HexlGaming]

I love how after these kinds of cars are built they are just so much better. I mean they are putting out more power and everything but what I mean is just the significantly enhanced substance of the vehicle.

[@IanBuell]

If the goal is cooling down intake temps, why not do water meth injection instead for a fraction of the cost?

[@marcdelong2654]

Does the cover still fit?

[@VehicleVirals]

Yes it does but only if you don't equip the fuel rail

[@Chandroth]

Does manual get a tranny cooler from factory?

[@Mr318live]

I just realized how impossible it will be to make an A90 Supra engine bay ever look good.

[@alexvillalobos7137]

Most modern cars with direct injection have a rats nest. I always like raw engine bags with nice painted valve covers. I have a 2018 type r and I’m not going to touch a thing. It’s packed with wires going everywhere the bmw is even worse

[@steveallam]

Hey Christian, Nice intake manifold! Did it come with a plastic spacer to isolate it from the heat of the head?

[@VehicleVirals]

It did not. I later found out that it was a separate purchase. I'll be adding it to the website later on today.

[@helios_123]

do you think you will wrap the supra?

[@VehicleVirals]

Probably not

[@Jayasama45]

Stock cooling is good up to 650hp

[@akhelodad]

Not if you take it to a road course you'll end up In limp mode pretty quickly on stock cooling

[@mkvsanh]

what are u tuned on?

[@mkvsanh]

or are you locked ecu

[@VehicleVirals]

Gotta send the ECU out

[@mkvsanh]

@@VehicleVirals gonna do clone for ecutek or the unlock for mhd/bm3?

[@VehicleVirals]

@@mkvsanh Most likely MHD

[@mkvsanh]

@@VehicleVirals looking forward to that step, sending mine out in the coming months buying all the fbo parts first

[@memeseller1706]

That’s a tank vent valve

[@kristiankorsakas3445]

Bmw switched to green coolant in all 2018 and up cars.

[@vollcare4076]

The OEM rockguard is much more effective to protect from stone damage as its covers the complete tubes, the aftermarket net doesn’t do this The CSF guard is NOT ‚the better on‘ - actually the OEM is the better / more than effective one

[@edboiii_5530]

Wait when did Christian get a Supra???

[@Yggdrasill8]

Would these upgrades void my warranty on my Supra😅 Not looking for more power, just reliability instead of BMW plastic

[@brandoncohen8994]

You should but a bmw sign on the car

[@TheMidnightNarwhal]

New BMW coolant is green that's why it's not BMW blue FYI.

[@wezkerlim]

kinda annoyed tho that bmw's so messy with all those parts covered under all those plastics btw. when the engine cover & ecu cover are removed, it looks so messy.

[@mohammedmuneam8070]

Intake manifold made from aluminum, will get heat from the engine , bad usage of material but great design 👍

[@VehicleVirals]

They offer a spacer to prevent that.

[@SacUnDruz]

Every time i look at a modern BMW engine and think about the amount of green-washing they do because of climate-change I wonder : What if they just started by not filling up their enginge-bays with an obsurd amount of unnessassary plastic...

[@nehemiaslabrador2288]

Dyno with this yet?

[@VehicleVirals]

Yes

[@nehemiaslabrador2288]

How much it add?

[@VehicleVirals]

@@nehemiaslabrador2288 Hard to say since the car has other mods. Check out the other Supra episodes. Also will be running port injection on the next episode that should be live soon.

[@Drew_HBK]

$4.3k for intake manifold? I’m going back to Honda 😂

[@alexvillalobos7137]

The new type r and si parts are still pretty expensive. They have come down 20% maybe more

[@Vgk36]

If guys that own and mod supras don't have power tools then what's the point 🥴😝🤣 Same goes for the price of the cooling upgrades. Pay once cry once .

[@VehicleVirals]

😂

[@aarongarner8452]

I think you saved 400 lbs in plastic 😅

[@josephandreuccetti7270]

New Supra needs more plastic

[@BasRikken]

the stock totally doesnt underperform

[@foxxrider250r]

$5300 is ridiculous

[@VehicleVirals]

For what you get? Not really.

[@foxxrider250r]

@@VehicleVirals I think it's better spent elsewhere honestly

[@VehicleVirals]

@@foxxrider250r Varies from person to person.

[@kevin-jm3qb]

​@@foxxrider250rit's a subpar manifold.

[@EricShoots]

4.3k what the absolutely fk lmao. Yeah, the average dude with a 340i ain’t gonna prob want to buy this. 😂 talk about get ya money up bozo. Peak poor n54 guy here

[@iamthatguytheonlyone]

Cap, you will make loss

[@karlpaljev9790]

so boring, im almost sleeping

[@kevin-jm3qb]

CSF manifolds are garbage get EOS

[@VehicleVirals]

You're clueless

[@kevin-jm3qb]

@@VehicleVirals @VehicleVirals lol no really, check out evolution of speed intake manifold. You won't regret it 🙂. Also check out what the top mkv 10 mkv record holders use. Cheers brother!

[@kmb96]

Yeah the manifold is 4300 but it’s also literally already setup to run meth/nitrous and has a built in port injection kit lmao what do the complainers want it to cost?😂 let alone how thick the internal bricks are in there, this is a product for the boys and girls that are trying to make big power not the people that are only doing a tune and flex fuel, I’ve already got this budgeted in for when I get a Supra because mine is going to get everything and the kitchen sink thrown into it all at once lmao

[@VehicleVirals]

Someone understands.

[@carmello000jp]

How this compares to EOS version 2?