This Nintendo Switch Lite Won't Charge Or Turn On! Can We Fix It?

[@andyk7217]

Why don't you use kapton tape to cover things like the battery terminal when using the hot air gun nearby...surely that'd save getting it damaged a bit?

[@pedromimoso8804]

You did it again! And a little diy, too, hey?... Not to mention that, between streaming and videos, you're everywhere on YT. Keep up the great work, bud.

[@TheCod3r]

Thank you mate much appreciated

[@mm0077]

You are a good teacher. I always appreciate your stream and videos.

[@TheCod3r]

Thank you 😊

[@dkaytan]

You are working hard. I appreciate it.

[@hi-haich]

Hi, I have a switch lite that has a shorted capacitor from the power management chip to the cpu. You said at 6:50 that if that capacitor is shorted, youd give up, is there any way I can save this switch with a shorted capacitor like this?

[@GodoftimeGaming]

I've just got recommended this video have to say amazing I'm definitely going to sub

[@simonwalkden5279]

Hi quick question i have a switch lite socket is shot have removed it but cannot see with meter any shorts on m92 or the other ic is it possible just the socket failed

[@retrorevive5140]

Nice video , as always. Greetings from Germany 👍🏼

[@onewheelnut]

Great videos, like the port mod, would it be easier to mod the case rather than the port itself ?

[@jasonsandford2987]

Nice one phil 👌really starting to make it look easy

[@TheCod3r]

Thanks bud

[@GinandTronics]

I have a switch board with the CPU cap shorting (junk bored) lots removed. well I was practicing cleaning up the solder pads under the CPU. and I clean it up, even without the CPU on I have that cap still shorting, so I'm going to looks at those caps under the CPU on the other side of the board to pin point what's shorting to ground. m92/ cpu has already been removed edit the cap isn't shorting, but the pad still is

[@andyledford8380]

What happened to the test bench that you used to simulate a full battery tho ?

[@TheCod3r]

I accidently sent 12v to it when I forgot to adjust my bench supply 😂

[@andyledford8380]

@@TheCod3r ooh lol

[@mm0077]

@@TheCod3r Hope you will show how to do one again with step by step guide.

[@TheCod3r]

@@mm0077 yeah I can do when I get another lite battery I can tear apart :)

[@REMEDY-REPAIRS]

Great work 💯👍🏾

[@adammarsden-rhodes703]

Good job Phil I love watching you work it’s like a Surgeon operating, great technician me thinks dear sir

[@cloverhover3996]

what is the common cause of broken m92 chip?

[@TheCod3r]

Usually damaged charging cables or ports cause faulty M92 problems:)

[@cloverhover3996]

@@TheCod3r thankyou very much for the info... nice work btw

[@juscelino2253]

​@@TheCod3rthanks. so if i replace m92 better to replace port too?

[@dabomb356]

So I have a switch lite that will not turn on unless I put a battery in it that already has power. I replace the charging port and I replaced the M 92 I’ve also replaced the BQ24. Neither of those chips are showing any type of short and the fuse just behind the charging port is also showing continuity. Any thoughts? Replace the charging port twice to different charging ports just to make sure somehow one wasn’t faulty

[@juscelino2253]

hey bro, found a solution?

[@Dannyfr33sh]

I challenge you to fix my not charging switch that I tried to repair and kinda botched

[@TheGlitchyMario]

This is gonna be cool

[@eathenalexander2836]

Great fix mr philius dankaroo lol

[@TheCod3r]

Haha thanks mate

[@TravisStamper]

Geez, late to the party this time. Adulting takes too much damn time. Thanks for the video Phil. get vanguard............