This Old Engineer is The Best Machinist I've Ever Seen | Making a Crazy Project on Lathe Machine

This Old Engineer is The Best Machinist I've Ever Seen | Making a Crazy Project on Lathe Machine,
In this video we will show you amazing skills of a old machinist who operates lathe machine with his leg his amazing skills will amaze me when i see him first time at his workplace, he turn a difficult piece of matel which is very hard to turn at a manual lathe machine he is work at aspellor manufacturing factory they manufacturing amazing oil making and filtration machines, in this video we will show you top 2 turning projects please watch full video and give your feedback in comments box stay tuned thank you so much,
This playlist was really good for you must watch and support my channel : Manufacturing process
• Playlist
Please subscribe ‪@mimechanics1019‬
#oldengineer
#machinist
#turning&broaching
#crazyprojectonlathemachine
#machineshop

[@GeorgeAlex-cl8cr]

Someone should give these clowns a workbench, it would blow their minds.

[@mimechanics1019]

Thanks for watching and also your suggestions 👍❤️

[@thedolphin5428]

All those old machines came from England when its old pre- and post-war manufacturing shops closed down. 60 -100 years old. Still doing what they were built for. 👏👍

[@mimechanics1019]

You are right 👍❤️

[@stephenaquilina6628]

If he has always worked with worn out machinery he absolutly does not know about tolerances.And you can see what type of work he is doing.The other machinist is just using an out side caliper.😮

[@alro2434]

THANKS! We always talk about hand, eye coordination for craftsmanship & skill, this takes it to a whole new level with hand, eye, foot!

[@mimechanics1019]

Thank you so much sir I appreciate your compliment ❤️

[@fawfulBeans]

My god, these guys deserve better working conditions.

[@mimechanics1019]

Agreed 👍

[@alexsegal4367]

Вот это токарь, мое уважение! Мехамозг с бербраером курят в сторонке

[@mimechanics1019]

Thanks for watching and sharing your thoughts 👍❤️

[@user-lm8yn9rp4h]

Спасибо, это была хорошая шутка.

[@user-dv1rg7oq5r]

Херассе акробат ! Сначала вообще не понял что он вытворяет .

[@Pashtosongaqeelzadran]

Good working great job 👍👍👍

[@mimechanics1019]

Thanks 👍

[@alfrescabanilla2504]

their technology are amazing and advance....

[@mimechanics1019]

Thank you so much sir appreciated 👍❤️

[@tonyworkswood]

Very enjoyable to watch.👍👍

[@mimechanics1019]

Thank you sir👍❤️

[@wazzazone]

Yeah that's ok, you're so good and important just throw it to the ground.

[@mimechanics1019]

Thanks for watching

[@buyamerican3191]

Engineer? machinist? Where???

[@mimechanics1019]

You can’t see a old machinist who opreating lathe machine with his leg

[@mattharvey8712]

Bravo.........low speed........no oil..........clever........cheers

[@mimechanics1019]

Thank you! Cheers!👍❤️

[@ac9081]

The man on the lathe machine is amazing, looking at him using his legs on this machine makes me wonder what kind mechanical skills he uses with his third leg. 😅😅😅😅😅

[@mimechanics1019]

Thanks for just your appreciating words 👍

[@knobsdialsandbuttons]

Awesome skills ! 👍

[@mimechanics1019]

Thank you so much for appreciate 🫶

[@knobsdialsandbuttons]

@@mimechanics1019 You're welcome !

[@Rickimusic]

Where is the engineer? I see a machinist.

[@mimechanics1019]

Here is that kind of machinist we call engineers thanks for comment ❤️

[@fernandoaraujo8792]

O torneiro mecânico é um ninja

[@mimechanics1019]

Thanks for your comment 👍❤️

[@lorenrasmussen338]

I worked as a beginner welder and machinist thru college but I knew I wasn’t an engineer until I got the diploma. A lotta smart people never make it thru college.

[@mimechanics1019]

Thanks for your review on this video 👍

[@nandofigueira2005]

They should put up tables to accommodate the pieces instead of dumping them on that horrible dirty floor.

[@mimechanics1019]

Great idea thanks for sharing 👍❤️

[@markahad6583]

That’s right, just toss them on the floor! 😡

[@texxasal]

I am continually amazed that these people do what they do with the tools and equipment that they have. Makes me wonder how the younger generation of computer jockeys would manage to survive under these conditions?

[@mimechanics1019]

Thank you so much sir for well appreciated greetings from us and make that old man proud thanks again🫶

[@snowflakemelter1172]

You can say that for any time in history, there is no guilt in developing clean and safe CNC machines rather than using manual machines.

[@Mtmonaghan]

When India can keep the lights on, bang a new China

[@nainitalism]

​@snowflakemelter1172 what the CNC can't do send it be done in China. Great

[@spikey2740]

Yes, he's good. Plus, I'd guess his visual measurement system probably isn't far off either - perhaps within 0.050"?

[@mimechanics1019]

Thanks for watching and your appreciate

[@jmmvictor1]

Hilariant técnic

[@mimechanics1019]

Thank you so much 👍❤️

[@vadimjcb3cxmurmansk]

Акробат.

[@mimechanics1019]

Can’t understand

[@jamespeterson4125]

I've watched this video before, and I just don't see it.

[@mimechanics1019]

Thanks for your response

[@russelljohnson6243]

HA!

[@thra5herxb12s]

Cowboy engineering at it's very best with extra handfulls of dirt thrown in. No doubt they are all good workers, but not good engineers.

[@Mtmonaghan]

They are for their customers, when they are not, they will get better.

[@dusty3896]

hope he is still alive

[@mimechanics1019]

😂😂😂yes he’s still here and alive

[@beardy951]

I suspect the engineers who made the lathe would cry and turn in their graves to see the butchery it now performs and the condition of it now. Why no cover over the gearbox,all the s&#t in creation will get in there, let alone clothing and fingers. It never ceases to amaze me how tight chucks and steadies are tightened up, only necessary if the items are worn out or the person doing the tightening has no mechanical understanding or sympathy. Other than that, gets the job done, but not an engineer or machinist.

[@mimechanics1019]

Thanks for your comment 👍❤️

[@nainitalism]

What to do you took all the brains and left the brown people with nothing 😢😢

[@teewizz6089]

Why don’t you go and have a lie down

[@Brad-zf3xm]

*Promosm*

[@mimechanics1019]

What is promosm

[@hampopper3150]

Is a cnc machine really that hard to come by? Its all about making the tools that make the tools is were true machining really lays. This old machinist likely gets padded pennies to do this job and that's why he's still there and not asking for a raise. Old machinist doesn't always mean best machinist he's just a good worker. Also he doesn't need to use his foot if he had a proper feed rate on the feed screw.

[@mimechanics1019]

You are right but people who manage with these kind of machines really need our support 👍❤️

[@user-lm8yn9rp4h]

У них нет знаний, образования, опыта, культуры производства, чтобы работать на ЧПУ. Если даже каким-то чудом и появится, они его угробят в первый же день.

[@hampopper3150]

@@user-lm8yn9rp4h Это может быть потому, что они все время воруют и мошенничают друг у друга, поэтому они даже не удосуживаются сделать что-то продуктивное.

[@victormontecinos3755]

Sin guantes sin protectores visuales sin bototos de seguridad que calidad de trabajo entregaran.Espectativa laboral corta ademas hay tramos de soldaduras que las hacen sin careta mal por sus empleadores..Con su equipo de trabajo rendirian mucho mas.Pesimo ambiente laboral pero ellos muy contentos veamos que sueldo ganan yo diria que miserrimo.

[@mimechanics1019]

Thanks for your comment 👍❤️

[@stephenaquilina6628]

You never learn this in trade schools,it'amazing but stupidity at the same time.We conventional machinist learned anything as stupid as this USEING YOUR LEG ON A LATHE,and bare foot. It is a disgrace to engineering ability.😮

[@nainitalism]

We got the job done you didnt

[@ignusgrobler2511]

Absolutely no presision. And why do they throw machined surfaces on the ground. It damages. No respect for his own work

[@mimechanics1019]

Thanks for sharing your thoughts 🤷‍♂️

[@lawrencemanning]

Yep. They must be pretty close in hardness terms, brick and iron. Mental.

[@dscdrkel5546]

??????????????????????????????????????????????????????????????????????DRKEL

[@mimechanics1019]

What means of drkel

[@wazzazone]

He's showing ignorance and doing a very dangerous acrobatics act with a machine he is treating with disdain, each work piece should be individually machined.

[@mimechanics1019]

Thanks for your review 👍❤️

[@stevo184]

The whole tailstock column has been moved back to accommodate larger gears, but when doing the pinion gears they've mounted that stupid extension to make up for amount it's moved back. The cutting oil looks old engine oil and they are doing these gears in one cut. These people are first class clowns.

[@mimechanics1019]

Thanks for watching and sharing your thoughts 👍

[@teewizz6089]

@stevo184. What gives you the right to call these people “first class clowns” you no doubt live in a Ist. world country and really have no idea or care for how the rest of the world lives and provides for their children. Why don’t you do some volunteer work in a poorer country.

[@marcelaograndao4515]

Trabalho escravo nunca deve ser idolatrado. Vídeo denunciado.

[@mimechanics1019]

What your mean about reported video🤷‍♂️