This Old House | Drainpipe Puzzle (S43 E19) FULL EPISODE

[@whommee]

Tommy is one hell of a carpenter and damned good craftsman.

[@daven1719]

Tommy: It doesn't look right because it's wrong. Me: That's good enough for me, Tommy.

[@carlosestrada4305]

I’ve been watching this show since I was 8 years old I’m 41 now lots of good times

[@eastcoastartist]

Same 😊

[@michaelcarroll991]

I love the dado on the back side of the window casing to take into account the window nailing flange. If the hadn't done this the trim would have rolled.

[@wotterthose4511]

Deliandro is great! You can tell he's getting more and more comfortable in front of the camera every time. Maybe he might have a future on TOH?

[@paulradice3534]

This Old House is nothing like it used to be.

[@bills6946]

Today, it’s more of a travelog than a diy show. If I want a tour of Newton, Mass. I’ll call my travel agent.

[@webdev217]

@@bills6946 It was never a DIY show.

[@Jin420]

Thanks for the idea for the exterior window trims. I'm prepping to repair a few of mine. 😊

[@bennemer489]

Tommy, the king of jigs.

[@CatchTheseDubs]

@5:10 If that's a "thin bead of caulking" I'd like to see what Tommy considers a big bead...lol

[@quelragazzodeigiochi9166]

Watch the previous episode, when they installed the windows and see. Btw this is the right way, don't cheap out on those things.

[@bigmigofresh6027]

So crazy how everything in these videos everything is done the right way and spent the money for the materials you need kuz in the real world you use the minimum material because builders don’t bring what you need and be cheap out to doing stuff the right way !

[@louisel.sinniger2057]

THAT’S why I buy my own materials. Plus, I’m home when the heavier work is done while I work on other less “heavy duty” work. Your work is your calling card

[@truckermike6381]

I LOVE watching this 👊 Very Educational 👍

[@mprest10]

Omg, these guys are good. Love it!

[@laurarose1234]

Great information for homeowners.

[@carolmccorry3053]

Great to see the guys back and welcom to new crew😊😊😊😊😊

[@michaelbaumgardner2530]

The ole story pole,it worth the time making one.

[@durangodave]

i wonder how many mistakes were made over the years during the poles evolusion. Tommy is prob using knowledge passed to him that was learned the hard way 100 years ago

[@michaelbaumgardner2530]

He is the story pole is old school but it works so does a preacher​@@durangodave

[@PatHaskell]

The exterior looks awesome!

[@paulyayala2645]

TOMMY IF I COULD START MY LIFE OVER I WOULD WANT TO WORK NEXT TO YOU FOR MY LIFES WORK..! I AM SO GLAD TO FINALLY SEE DIFFERENT COLORED MEN THAT LOOK LIKE ME WORKING WITH YOU GUYS ON THIS OLD HOUSE!AS I KNOW IT WILL INSPIRE OTHER YOUNG CHILDREN FROM ALL NATIONALITIES TO WANT TO ALSO BECOME GREAT CRAFTSMEN JUST LIKE YOURSELF,THANKS AGAIN FOR SHARING YOUR KNOWLEDGE WITH ALL OF US! GOD BLESS …

[@johnklamm6720]

Yeah Tim Allen can relate to low hanging pipes😅😅😅

[@ariapl1305]

“I’ve been in the residential plumbing business for 20 years, and I’ve never used a concrete drill to dig up a floor.”

[@richardmoss5934]

She so underestimated the Dutch Elm disease when she said that it decimated the tree population, in reality it nearly destroyed them all.

[@Scubamike4499]

Did they make sure to synchronize speed squares before you installed the starter course?😂

[@brilog69]

Nice job guys!

[@Dominic-x3t]

Would of used two 45s on that pvc drain pipe in basement instead of back to back 90s!

[@bills6946]

Running a lead caulk joint is from days of yore. I’ll bet there isn’t a plumber under the age of 50 that has ever melted lead on the jobsite. Bell and spigot cast iron was forever.

[@troycarothers8254]

What precautions need to be taken with that PVC window trim as far as warping in extreme Summer heat?

[@JimKlus-jc4dw]

PVC is a thermoplastic that can withstand 140 degrees F and PVC pipes up to 220 degrees F.

[@ericwotton2046]

Don't paint It a dark color without thinking about sag. If it's going to be painted dark, use extra fasteners to prevent sagging in the sunlight.

[@elizabethzieman1059]

Architect here…using Boral more and more to void that very problem. Yes, PVC can withstand heat technically but has large thermal expansion, so, yes, it sags and twists and shrinks and joints open up..

[@keithparady2594]

Always wicked good information in these videos

[@Jin420]

They make removing the cast iron pipes look so easy... It was NOT that easy when I started on my plumbing. Took a while.... 😂 (House was built around 1931 with bare minimal updates)

[@rupe53]

Tom looks pretty good for 77 years old.

[@bills6946]

He gets his daily dose inhaling SYP sawdust. It’s better than 2 slices of Wonder Bread.

[@keithparady2594]

Good one

[@johnklamm6720]

Yeah you're talking about low hanging pipes just ask Tim Taylor from home improvement

[@bmitch3020]

Measure once, cut the toilet hole twice. 🤦

[@keithparady2594]

That’s just how we do it here in Maine too

[@edsinger2982]

Tommy, "I like to apply a thin bead of caulk." Proceeds to apply half the tube. :)

[@durangodave]

i bet that tree was about $1000

[@WW3_Soon]

At his advanced age, millionaire Tom Silva should retire and enjoy the fruits of his mansion.

[@njwags95]

Why the round holes cut in the outside planks?

[@elizabethzieman1059]

There was at one time holes cut for blown-in cellulose insulation. Awful messy stuff that compresses down over time, loses insulation value and the mice love it. I would expect new spray foam to go in walls.

[@jeffdieringer1]

Peter Mezzit! any relation to Peter J. Mezzit who developed the PJM rhododendron hybrids?

[@David-uy2xl]

Come on guys snap cutters

[@jackknife89actual]

I miss the old intro music.

[@viperexpress305]

You guys never talk about how much money it takes to do these jobs ! 🔨 🤔

[@Dino_Buk]

Most of the viewers doesn't have that kind of money anyway.

[@Trinn03]

Big phat construction or home loans 😅

[@rupe53]

I would bet there's some sponsoring on these builds, where certain products are highly discounted or donated. If this were the History Channel, there would also be some extra cash injected by the production company as well.

[@Jin420]

Oh.. they're using the zip system. #Nice

[@ssl3546]

The ZIP tape (being used here on the wrong substrate anyway) clearly says to ROLL THE TAPE and what does Tommy do? Gives it a pet like a puppy.

[@carlpayne8008]

That pipe looks like a headache to me 🤕

[@kingdommanlegacyministries7769]

I LOVE TOH & the guys & have forever....HOWEVER... why not layout/plan the plumbing FIRST then move/build walls second? I would AND... underneath the z bend I would apply a small bead of OSI before installing the flashing. I call it 'back caulking'... & I would put a smidge on the end of the 'water table' or I call it a ledger, when butted against the vertical corner board. If a little water gets behind the initial surface, it really won't get too far.

[@dosadoodle]

Chain cutters for cutting large cast iron pipe are extremely expensive. A much less expensive option is a Diablo Steel Demon Carbide Teeth reciprocating saw blade. These blades are not cheap, but they cut through a large pipe in 5 minutes and I could reuse it several times. I'd also tried the better metal cutting blades from Milwaukee and Lenox, and it took over an hour to make one full cut and it destroyed 5 of those blades. Of course, I only learned about the carbide demon blade option after I'd bought a used chain cutter on Craigslist that ended up also being a terrible buy as the chain blades were too dull (replacement chains are incredibly expensive).

[@Dr.Claw_M.A.D.]

🧨 +duck tape. Easy peisy lemon squeezy.

[@emddudley]

All that microplastic debris in the yard from cutting the cellular PVC

[@fettyguapo]

Yea that’s what happens when you cut plastic, also there’s wood dust when you cut wood 😱

[@rupe53]

@@fettyguapo yeah, and when cutting PT wood, the sawdust never rots.

[@Scubamike4499]

I'm not picky, but I thought the same thing. Put some plastic down for the sake of the yard.

[@RockFish-uv9vs]

Tour show DONT DO ANYTHING for others who really need help.

[@steveho9884]

Richard we need help somebody bathroom leak into to my father bathroom I need help fix if

[@maxxmich]

this use to be a good show with American workers... now non American workers... 😢

[@jackmeyers9291]

Is it coincidence that all of your contractors speak with a Spanish accent ?

[@natersalad889]

Theres contractors still using pneumatic nail guns? Geesh....

[@rhchapman96]

Safety man here. I'd have a hay day. Come on guys, an A-frame ladder, leaning up to the house as an entrance to the back? I expected more from you

[@jimdarhower4945]

Cry more.

[@Scubamike4499]

Right, let's put in an elevator