This Plasterboard Lifter Is A GAMECHANGER...

  Рет қаралды 62,299

Plastering For Beginners

Plastering For Beginners

Күн бұрын

Пікірлер: 79
@jamesp739
@jamesp739 22 күн бұрын
Agreed, a great piece of kit. The job goes faster, safer, and with less fatigue at the end of the day. And being a DIYer, you're more likely to bring the board down and trim it if it doesn't quite fit, than force the board into place, breaking a corner or edge. Lifts are currently running about $200 + -(US) (2024) depending on where you buy it and if you can get it on sale. If you need it for only one job, sell it for about 80% of what you paid for it. Cheaper than renting one. If you can find one used, you can sell it for what you paid for it. No real excuse for not using a lift unless you're doing a small closet or a very narrow hallway. Cheers from America!
@petespencer5260
@petespencer5260 Жыл бұрын
Had one of these about 10 years, still going strong. Great purchase. Extra tip, you can use to hold up your head plate for stud walls as well. 👌
@PlasteringForBeginners
@PlasteringForBeginners Жыл бұрын
Ohh that's a good tip - cheers pal. Hope you're well my friend!
@stevengordon2145
@stevengordon2145 Жыл бұрын
Changed the game for me in 98 bud..been using one ever since. Glad to see ya jumped on the bandwagon... Work smarter not harder 👍
@PlasteringForBeginners
@PlasteringForBeginners Жыл бұрын
Legend! Fair play mate - I think they are mint...even if I am late to the party ha! Thanks for watching pal. All the best to you
@patrickshaw9376
@patrickshaw9376 Жыл бұрын
I got one of these about 3 years ago, it's saved me thousands in labour.
@nigelsmith1198
@nigelsmith1198 Жыл бұрын
Best bit of kit I ever bought.!
@Two_Bluebirds
@Two_Bluebirds 7 ай бұрын
This is terrific information! Thank you so much from Australia. I will pray for you and your family! God bless you.
@katabrontes
@katabrontes Жыл бұрын
We bought one in France after struggling to board a sloping ceiling. We've done several ceilings since very easily and i can do it alone with part boards as i find full boards a bit heavy on my own. I also used it to fit narrow boards (300mm) between joists. It needed a small mod by screwing blocks onto the arms to lift the boards about 120mm above the arms so they lifted flush to the ceiling between the joists.
@HSilver341
@HSilver341 Жыл бұрын
Had 1 since 2020 a must for boarding
@waynepreston5
@waynepreston5 10 ай бұрын
Thank you for your expertise and time 5:26
@lestercranmer2631
@lestercranmer2631 Жыл бұрын
Yes they are brilliant, i have one, just need to have a clear floor, i think i paid about £90 a few years ago, so they've gone up a bit but still worth it,
@PlasteringForBeginners
@PlasteringForBeginners Жыл бұрын
That's a great indicator of the rate of inflation at the moment ha!
@xristosmissios208
@xristosmissios208 4 ай бұрын
Στην Ελλάδα τώρα κόστιζει 304 €
@deanryan8533
@deanryan8533 3 ай бұрын
Does the wheel base need to be in that sort of triangle shape at all time when using it, or can you adjust the change how they're positioned and it still be safe to use?
@OilBaron100
@OilBaron100 8 күн бұрын
Wow, so cheap! That job looks so easy with that tool.
@Charlie-zb6le
@Charlie-zb6le Ай бұрын
I know its to do ceilings solo, but is this quicker then having 2 people doing it? looks slow tryna get it into posistion perfectly.
@allenr265
@allenr265 Жыл бұрын
What if you want to install your plaster board vertically instead of horizontal on a inclined ceiling is it possible? Thanks mate😊👍
@MrOwaisk
@MrOwaisk 5 ай бұрын
I need to build a pergola. I bought 4 x 4 pergola kit from Amazon. Now, I have to lift 12 ft long 4 x 4 all alone. Could you please tell me if this can do the job? Appreciate it in advance
@davewright9312
@davewright9312 Жыл бұрын
Used one of these recently on a ceiling in an old farmhouse...the ceiling was just over 10ft 6 high and we ended up reboarding between the beams.totally agree it's a game changer..we hired one for a week for about £60...only problem I had was I tripped over one of the legs and had a massive bruise on my knee 😂
@BODGE71
@BODGE71 Жыл бұрын
I can't see the link where you bought it from!
@PlasteringForBeginners
@PlasteringForBeginners Жыл бұрын
It's there now pal!
@lsimat1
@lsimat1 Жыл бұрын
Great tool honest yes game changer for sure
@willswoodshop
@willswoodshop Жыл бұрын
How simple is it to break down after a job and pack up in the van?
@pegheadproductions
@pegheadproductions Ай бұрын
What if you’re in the attic and the ceiling has a 30 degree inclination?
@paulwatson4167
@paulwatson4167 Жыл бұрын
I've had one since 2014 just keep a check on the nuts and bolts they do work loose. I wouldn't be without my one
@PlasteringForBeginners
@PlasteringForBeginners Жыл бұрын
Thanks for the heads up. Cheers matey!
@markishios
@markishios 11 ай бұрын
creo que es bueno empezar con el cielo luego dejar al final las paredes ,pero esas maquinas son muy util ,evitas lesiones generalmente de lumbago
@elliejake11
@elliejake11 Жыл бұрын
I bought one for £60 second hand, from a couple that done a self build in lockdown, pukka if the joist run out, saves holding it up to mark
@djhago3123
@djhago3123 Жыл бұрын
Sometimes the little bar that reel slides out on bends just screw 2 bits of 2x1 to eachother threw the slot just to strengthen it up..
@ranat5526
@ranat5526 9 ай бұрын
Picked the same one up on amazon for £119!
@sominmystery6121
@sominmystery6121 Жыл бұрын
How long does it take to assemble? How long does it take to disassemble? Is it easy to disassemble?
@davewright9312
@davewright9312 Жыл бұрын
The one I hired took two mins to assemble and disassemble...absolute piece of cake.. Fits in the back of a car too
@SamM-oh2cx
@SamM-oh2cx Жыл бұрын
The problem in the clip was the clips on the board lifter! You had loaded the board on, laid it back and raised it to the ceiling without pulling the load clips back!
@liamdraper447
@liamdraper447 Жыл бұрын
Got one and it’s amazing! I find that the reel bar likes to bend sometimes tho. And when ya pull the release lever, keep another hand on the wheel otherwise it might bonk ya, learned that the hard way xP do you ever use a T square for cutting the board?
@Farmstock24v
@Farmstock24v 3 ай бұрын
Max height for this?
@paulknight8254
@paulknight8254 Жыл бұрын
Have you located the stem to the base correctly.
@PlasteringForBeginners
@PlasteringForBeginners Жыл бұрын
Yeah - it was in nicely pal.
@markjarvis9780
@markjarvis9780 Жыл бұрын
Had one of these a few years now. Everyone takes the P*ss out of me using it but saves me a lot of messing about I find. Especially working on my own
@billyt9921
@billyt9921 Жыл бұрын
I bought a yellow one last summer for 4m meter ceiling. The cable snapped on the 2nd board...... gutted, cos it would have been great
@PlasteringForBeginners
@PlasteringForBeginners Жыл бұрын
Christ that sounds awful - sorry to hear that. I would have asked for a refund!
@cloudyeastside
@cloudyeastside Жыл бұрын
I got one 7 years ago to re board ceilings in my house.. it was £99, the cost of renting one for a week was the same, you do the math…
@PlasteringForBeginners
@PlasteringForBeginners Жыл бұрын
I feel it's a no brainer ha!
@Bibg867
@Bibg867 Ай бұрын
I bought a lifter that is assembled and disassembled in 3 mins without any tools. Lightweight and easy to store in my van/garage
@yellownev
@yellownev Жыл бұрын
We’ve just overboarded every ceiling bar 1 in my lads house and it was a very useful piece of kit…. He’ll sell it on I guess so the cost against hiring is a no brainier. Why struggle !
@PlasteringForBeginners
@PlasteringForBeginners Жыл бұрын
Exactly that mate. I've struggled enough in the past
@paul_my_plumbs_uk
@paul_my_plumbs_uk Жыл бұрын
👍🏿👍🏿 Blaine it got you in the corner 😂😂 but come out fighting 🥊🥊🥊🥊
@PlasteringForBeginners
@PlasteringForBeginners Жыл бұрын
hahah that's the one matey 🤣
@durisrob
@durisrob 21 күн бұрын
is this a good piece of kit?
@PlasteringForBeginners
@PlasteringForBeginners 20 күн бұрын
It's mint mate
@kendodd8734
@kendodd8734 Жыл бұрын
That’s gotta b easier than trying to pull deadmen prop under the board with one hand whilst trying to balance the board with the other hand to b honest if ur on ur own doing lids I always go for 6 by 3 boards just much more manageable
@christophersmith5606
@christophersmith5606 Жыл бұрын
Great for big areas , if you’ve got a clear floor
@PlasteringForBeginners
@PlasteringForBeginners Жыл бұрын
Absolutely!!
@xristosmissios208
@xristosmissios208 4 ай бұрын
Και μπάνια κάνει
@rus1137
@rus1137 Ай бұрын
0:30😂 не попал❤
@henrytwigger2245
@henrytwigger2245 Жыл бұрын
That's 2 guys out of work !
@PlasteringForBeginners
@PlasteringForBeginners Жыл бұрын
I struggle to find 2 decent guys who want work near me!
@lestercranmer2631
@lestercranmer2631 Жыл бұрын
@@PlasteringForBeginners have you tried using deodorant 😁
@sadie376
@sadie376 Жыл бұрын
Oh yes, that makes a lot of sense if you do board-orientated work anything more than occasionally... Unless you get paid by the hour!
@PlasteringForBeginners
@PlasteringForBeginners Жыл бұрын
Ha exactly. I'm on price so it's needed !
@sikandermahmood8308
@sikandermahmood8308 7 ай бұрын
Very good lift I'm using one like this very easy to lift up plasterboard and hold up
@barnie8282
@barnie8282 Жыл бұрын
Wish I hired one of these. Those pink fibreboards are heavy as hell especially when your a 5'5 short arse😂
@PlasteringForBeginners
@PlasteringForBeginners Жыл бұрын
Definitely mate. They are heavy as. And I feel for you - I'm a short arse too so I know the pain 🤣
@JBR887
@JBR887 8 ай бұрын
I pinched the fuck out of my hand packing up the same brand sheet lifter 😅
@petemoring67
@petemoring67 Жыл бұрын
Gimmee a four foot tressle and a studded helmet any day - OK for DIYers though 😎
@nigelsmith1198
@nigelsmith1198 Жыл бұрын
🙄🙄
@awt
@awt Жыл бұрын
Only £136 today, Black Friday deal.
@inh415
@inh415 Жыл бұрын
Think how slow this is would wind me up. Unless you physically can't lift a board above your head I can't see how this is better than a couple T props made from 2x4's. Though I guess this thing would be better for really high ceilings.
@PlasteringForBeginners
@PlasteringForBeginners Жыл бұрын
I just don't like using props on my own. it kills me ha! But I rarely do plaster boarding so it's probably my lack of technique ha.
@michaelyouens6133
@michaelyouens6133 10 ай бұрын
100mm club that son
@Scott-wz4sc
@Scott-wz4sc Жыл бұрын
Looks very cumbersome, and then there's the extra labour in dismantling it to remove it from the customers house without scuffing their anaglypta 😂. Then you have to store the thing when not using it! Its an awful bit of junk, suited for DIY'ers at best.May come in usefull on a large site. But in an occupied house! I don't think so. Oh and hope you corrected your mistake at 5.20 😂. Missed a trick there, you could of done a video on how to patch up PB when no joists are available to fix to 😊
@jaimewilson1011
@jaimewilson1011 Жыл бұрын
Ok on your own but time consuming I would emagine
@GG-un1ug
@GG-un1ug 3 күн бұрын
Not convenient bad and challenging for small space still u must lift the drywall at least 4 feet off the ground and place it over this gizmo not worth the money and time its 80 pound's to move it around needs very much improvement and felexbilty to be added to product so two ppl can do better job in shorter time
@theunvaccinator
@theunvaccinator 3 ай бұрын
packing and unpacking its not going to replace 2 men only slow job down
@Robyerto-mb4wk
@Robyerto-mb4wk Ай бұрын
Chino total 👎👎👎
@peterstanley5991
@peterstanley5991 Жыл бұрын
What a waste of time been boarding for 50 years use a couple of nails in the right spots and it’s up . But I am not telling you how.
@ranat5526
@ranat5526 9 ай бұрын
Back and neck breaking, I bet a $ your body took a beating!
@dinamiteurdinamiteur2324
@dinamiteurdinamiteur2324 7 ай бұрын
Oh, Shut up boomer. No one carr of your crap method
Installing drywall on upper walls with lift by Laurier Desormeaux
8:43
Laurier Desormeaux
Рет қаралды 564 М.
The BEST Drywall Lift FACE OFF
13:55
Home RenoVision DIY
Рет қаралды 109 М.
IL'HAN - Qalqam | Official Music Video
03:17
Ilhan Ihsanov
Рет қаралды 700 М.
Plasterboard HACK | Every DIY'er Should Know
11:29
On The Trowel
Рет қаралды 846 М.
How to build drywall ceiling | Right  Method
19:50
Michael Bashmet
Рет қаралды 3,6 МЛН
Plasterboard - Why All The Colours?
7:08
Skill Builder
Рет қаралды 92 М.
How To Use a Drywall Lift
6:54
HouseImprovements
Рет қаралды 795 М.
Diy,how to make the panel lift  drywall ceiling cheap and easy
17:03
Learn How To Plaster A Wall (ROLLER METHOD REVEALED) | Plastering For Beginners
26:53
Plastering For Beginners
Рет қаралды 298 М.
Dizalica za Knauf / Gips Ploče - SUPERKLIK
4:56
SuperKlik
Рет қаралды 10 М.
Підйомник для гіпсокартону своїми руками
10:08
ІГОР АНДРЕЙЧУК
Рет қаралды 217 М.
How to Drywall a Ceiling by Yourself
15:53
Proper DIY
Рет қаралды 80 М.