This PS5 was also SENT to TEST ME!!!!

  Рет қаралды 77,041

My Mate VINCE

My Mate VINCE

Күн бұрын

Пікірлер: 184
@TheCod3r
@TheCod3r Жыл бұрын
Don't give up on this Vince! I suspect you have a blown fuse or transistor somewhere on this. The problem is you had a LOT of current going through the fuses, more specifically F7001 and F7502. It could be a southbridge problem but it's unlikely in this case. I'm more than happy to send you a southbridge or two so you can revisit this by the way. Just let me know and I'll fire one over ASAP
@TheCod3r
@TheCod3r Жыл бұрын
Also look into UART. We have pretty much full UART access these days to find the exact fault code which is generated the moment the console powers up (even for 2 second BLOD). Thanks by the way for the shoutout bud. It's very much appreciated ❤
@djollieuk
@djollieuk Жыл бұрын
Go on Phil the goat
@mikethedigitaldoctorjarvis
@mikethedigitaldoctorjarvis Жыл бұрын
@@TheCod3r I really like seeing that when youtubers help each other out like this,says a lot about the person,nice one Phil (but knew you were one of the good guys anyway)
@danieltornqvist6062
@danieltornqvist6062 Жыл бұрын
This could be a beautiful coop-video? :-)
@TheCod3r
@TheCod3r Жыл бұрын
@danieltornqvist6062 agreed but it would be better for vince to fix it himself, not only for satisfaction but also to learn. Plus this doesn't actually belong to vince so I wouldn't fix it for free if that makes sense. I don't mind supplying him with parts though :)
@TheCod3r
@TheCod3r Жыл бұрын
Ooh been waiting for a PS5 from you 😊🎉
@MarkWilks84
@MarkWilks84 Жыл бұрын
Southbridge isn’t married, just buy a reballed and throw it on. Could just be a resistor though or PMIC. If 1.8v is missing then it could be the original area where you started, perhaps the PMIC. Keep up the great work, I love how you prove a fault and don’t generally swap components unless you know, I enjoy your adventures.
@stevenwilson2786
@stevenwilson2786 Жыл бұрын
Love your videos on electric boards so good to learn more watching them . Also I’m a mechanic and I’m sure what you have done it will pass mot no problem looking very good now ,even if it fails you will know what it needs . Cheers
@marcellipovsky8222
@marcellipovsky8222 Жыл бұрын
HI Vince, I like your persistence. I would not even try to fix a PlayStation. Never had one in the hands. Also, having a power rail present may not be enough. There should be a power good signal too.
@devttyUSB0
@devttyUSB0 Жыл бұрын
What doesn't get fixed, makes you stronger, Vince! :-) Great video, lots of tips and the fault finding steps are just worth it on it's own.
@renatoscutube
@renatoscutube Жыл бұрын
Congrats on finding what the 12 volts rail short was... As for the main problem, I've seen professional repairmen who are not able to solve that turn-off problem.
@dereklincoln-c6v
@dereklincoln-c6v Жыл бұрын
It may be strange but a quick thing is the fan motor pulling the system down.good luck
@logothaironsides2942
@logothaironsides2942 Жыл бұрын
Very entertaining as usual and I learn little bits every time.
@sublime167
@sublime167 Жыл бұрын
Vince that 1.8V is generated by a voltage regulator on the other side of the HDMI encoder. It takes in 3.3V from I think a dialog chip, uses a 3.3 enable signal from the southbridge and spits out 1.8V which goes to the encoder and another VR that generates .8V. I've used TI part TPS7A2018PDBVR as a replacement in the past. Unlikely culprit but check for the enable signal on pin 3.
@Mymatevince
@Mymatevince Жыл бұрын
Thanks Sublime, I'll look into it as I reballed a Southbridge chip today as part of a revisit video. I found that if I put 3.3v from my bench power supply on a voltage regulator next to the encoder that it does generate 1.8v. However the 3.3v feeding that voltage regulator is missing and the pad goes under the Southbridge (hence the reason I replaced it and spoiler alert it didn't work). I will look into the Dialog chip as I think the enable for that 3.3v might be missing!!! So have I read it correctly that the enable pin is on pin 3 of the Dialog chip near the F7003 fuse?
@sublime167
@sublime167 Жыл бұрын
@@Mymatevince I just checked and I picked up source voltage for that VR from one side of the dialog/RT chip at F7003, pins 25 and 26. I'd send a picture if I could but such is the youtube comment section life.
@Mymatevince
@Mymatevince Жыл бұрын
@@sublime167 Thank you so much 👍👍
@DavidJaskola
@DavidJaskola Жыл бұрын
Great show as always cheers Vince
@MemzDev
@MemzDev Жыл бұрын
How it broke: 1. Broken hdmi port 2. Attempt to fix hdmi port 3. And incorrectly applied cooler fried mosfet with liquid metal
@DjAdeGR
@DjAdeGR Жыл бұрын
awsome vid, thanks to you, i might have found a way to resolve my 12v rail short
@profithunter777
@profithunter777 10 ай бұрын
Most users report getting the PS5 blue light of death after a power failure, when the system was not properly shut down, or after a game crashes or when the solder joints for the APU have been broken. Some say a software update by going into safe mode/new hard drive works for them, others had faulty solder joints on the APU.
@murmur3966
@murmur3966 Жыл бұрын
Big Hello From Canada!!! Good try with such a monster problem board big guy. There were so many possible problems and you spent so much time working on it, I was sure you caught the problem component. For sure I would love to see you replace the southbridge chip and that whole bad hdmi socket for a part two to this episode. Sony is very bad when they design boards, for making so many different components connected in series, so that all the other good components are rendered usless when a single part goes bad or shorts out. There were so many possible shorted parts and who ever got the liquid metal everywhere should be spanked. Vince you put so much work testing and swaping components into the board, that it would be a shame to not try all your possible solutions. I have confidence in your skills to swap the southbridge for another spare one you have, but even reballing the APU to replace, is easy with a solder stencil. I HOPE YOU GO FOR ALL THE GLORY!!!! I believe you can exhaust all the possible faults causing the darn thing to not work. Keep up the awesome content and I can't wait for "PART TWO of "SENT to TEST ME!!!!" 🤘😁👍
@rodrigogarcia1383
@rodrigogarcia1383 Жыл бұрын
Dear Vince, glad to see another of your videos! I've been following you for some years now and let me tell you, if i had the proper place i'd definitively try these things myself. Always ready for a new video, thank you for your good heart and will to continue inspiring people to try to fix their stuff. Greetings from Argentina!
@guidomersmann9744
@guidomersmann9744 Жыл бұрын
Nice fault finding that mos-fet. It always amazes me how patience one can be. :D
@wisher21uk
@wisher21uk Жыл бұрын
That black everywhere looks more like soot from the burnt out components? Well done Vince could it be the Wi-Fi module ? Never give up 😊
@Mymatevince
@Mymatevince Жыл бұрын
Thanks Gary 👍
@UltimatelyEverything
@UltimatelyEverything Жыл бұрын
Nice perfect timing i was ready for another Vince video
@Karthor.
@Karthor. Жыл бұрын
I know that the southbridge on xbox one s don't like 12V, because i accidently pushed 12v into the southbridge and it was gooone after that so yeah if the southbridge controls the gates and the gate got shorted with 12V it most likely blew the southbridge
@Mymatevince
@Mymatevince Жыл бұрын
Thanks Karthor
@thomasdoherty6876
@thomasdoherty6876 9 ай бұрын
Just an idea but when you wanted to connect the 2 boards together by ground you could use a piece of solid core and feed a loop between the 2 boards through the large holes and twist the ends maybe?
@megabitestradings
@megabitestradings Жыл бұрын
Hi Vince, just wondered if you replaced the fuse you took off at the beginning F7501? I may have missed it
@Pwills
@Pwills Жыл бұрын
It will always be the last part you remove that is at fault because you will stop looking when you find the part that’s not working.
@alext8828
@alext8828 Жыл бұрын
So funny. Why keep looking if you've already found it? Hahaha.
@Mymatevince
@Mymatevince Жыл бұрын
Hahaha, so very true😂
@Ed_Stuckey
@Ed_Stuckey Жыл бұрын
Just like you find your lost keys at the last place you look.
@andymouse
@andymouse Жыл бұрын
Lol! yeah in any successful repair the very last thing you do is fix it...every damn time !
@oliverer3
@oliverer3 Жыл бұрын
Sometimes if a repair has been particularly tricky I've kept looking because I end up developing trust issues in the process. xD
@rfr653
@rfr653 Жыл бұрын
Good job mate 👍
@renoouellette5675
@renoouellette5675 Жыл бұрын
Love your videos, Reno from Maine, USA
@GarthBeagle
@GarthBeagle Жыл бұрын
Good work Vince! You always put your best effort forward no matter the result👍
@leeheggie7043
@leeheggie7043 Жыл бұрын
easier than marking. holes that dont have the screws have marks on them to indicate no screw.
@troyharwood3225
@troyharwood3225 Жыл бұрын
Hey Vince. A trick I do with hard to find shorts? Put the board in the refrigerator to get cold then have your thermo camera ready because it will help it be more sensitive to heat. Then if that don’t work ? Crank up the amps to the board and repeat. Hope this helps in the future.
@colinboneham7387
@colinboneham7387 Жыл бұрын
Vince I’ve got a cctv system that will test you, it all seems to work but there is no signal to tv, I’ve run over it with a multimeter and I can’t find a short anywhere, but I’ve found found 4/5 surface caps that read as continuous thru the cap, I’ve looked all over the web for a circuit diagram to get voltages etc for the chips but no luck anywhere so I did the easy thing and got a new one, but I’m keeping the old one for now to keep looking, but I may send it you to have a play with.
@abdaimegaming2679
@abdaimegaming2679 Жыл бұрын
It's always a good time seeing a notification from vince's channel
@ServisTOPRO
@ServisTOPRO Жыл бұрын
28:04 you figured out which power rail is shorted to 12V. But you don't realized it. You measure the coil on this rail and 12V rail and it was shorted. If you try to find which auxiliary power rail is conected to main 12v take one probe on this rail(12V) second probe measuring the coil around and if its short you have you're suspects. Sorry for my English.
@maturaseven7790
@maturaseven7790 Жыл бұрын
actually, no previous work is done - all those components are desoldered, because the Liquid Metal chemically reacts with the solder and after that the components just felt off, as the solder essentially is dissolved by the Liquid Metal.
@jreding132
@jreding132 Жыл бұрын
looks like the jumper wire to feed power in to the board is the same colors we use for cross connect wires in telecom punch down panels...do the British use White, Red, Black, Yellow, Violet and slate? in 25 pair?
@MrMalky1550
@MrMalky1550 Жыл бұрын
there should be a diode on the hdmi pins you wont get any life from the console without a hdmi signal, I only know this as I worked on one of these in my job and whilst changing out the HDMI port i knocked off the diode next to the pins and after 2 hours of trying to find it I did, refitted it and the same issue you are having but after turning the diode round the PS5 came back to life. Hope this helps you
@Mymatevince
@Mymatevince Жыл бұрын
Let me check this, thank you Malky
@thomasesr
@thomasesr Жыл бұрын
you need to use lower voltage and higher amperage to show components heating. Try 1V 5A
@derallgaeuer7132
@derallgaeuer7132 Жыл бұрын
But if the resistance not low enough you won't able to draw 5A at 1V Ohm's law 😉
@thomasesr
@thomasesr Жыл бұрын
@@derallgaeuer7132 i know. But you shouldn't limit the amperage to 0.8A on the bench poweer supply
@derallgaeuer7132
@derallgaeuer7132 Жыл бұрын
It seems I missed this little detail
@rebug5614
@rebug5614 Жыл бұрын
I noticed straight away why it no longer powered on. He forgot to put the ribbon cable back in for the power switch on the front of the console! 😂 🙈 Surprised you missed it as well Vince
@The_Pirate_Abd_El-Krim
@The_Pirate_Abd_El-Krim Жыл бұрын
I feel you Vince.
@SuperGoergen
@SuperGoergen Жыл бұрын
You have three broken PS5s now. It would be nice if there is a way to get at least one out of it that is working. I think I saw the replacement of the southbridge in another repair video. But it might have been a PS4 where the southbridge chip was replaced.
@SuperBee4406
@SuperBee4406 Жыл бұрын
Noticed the APU liquid metal pooled up toward bottom of chip. Console was primarily standing during operation. That could indicate that the solder under the APU may need reflowing. Just an idea....
@AnonymousRepair
@AnonymousRepair Жыл бұрын
nice troubleshooting, Could be that the 1.8v got a power good line so even giving it 1.8v could still pull-down the power good line, I am not sure of this
@Mymatevince
@Mymatevince Жыл бұрын
Thanks AR, I am going to revisit this one 👍
@joshkelly4682
@joshkelly4682 Жыл бұрын
Try changing out the fan, I've watched a video recently of a ps5 having a shorted fan causing it to turn off even though the fan was working, it's worth a shot
@TheSkaldenmettrunk
@TheSkaldenmettrunk Жыл бұрын
Oh man.. so much work but not all for nothing.. it has power again!
@jeanrossell8129
@jeanrossell8129 Жыл бұрын
two mosfet coil resistor are powersuply's on the bord restor them first then masure
@bladerunner1017
@bladerunner1017 Жыл бұрын
Hi buddy just watched you ps 5 video very interesting but I did notice how the liquid metal has pooled at one side off the apu leaving it to get overheated and lead to a fail and it caused by running ps5 upright so when really hot it runs to one side you see it on the second board you bring in
@kiphakes
@kiphakes Жыл бұрын
Oooph that was a testing one! PlayStation 5’s look HARD!
@Mymatevince
@Mymatevince Жыл бұрын
Thanks for watching Kip 😎
@jasonudall8614
@jasonudall8614 Жыл бұрын
You need a way of measuring low resistance....and comparing....inject 1 amp...measure voltage around board. Seeking minimum. Injest 1 amp limited to 1 volt
@seesikopter
@seesikopter Жыл бұрын
I hope you’ll do a revisited once you feel confident enough that you fix it
@CLC-1000
@CLC-1000 Жыл бұрын
Love a great My Mate Vince long video. 👍
@andymouse
@andymouse Жыл бұрын
Seems to me somebody in the console space should do a bit of scope work and document it a bit better as there must (is) some way of establishing the health of the graphics chip API? anyhow nice try Vince and its electronics like this that keep us grounded !!.....cheers.
@MoreArtix
@MoreArtix Жыл бұрын
46:20 hdmi encoder chip that you put on as a replacement is cracked and probably not good worth looking into
@BuyitFixit
@BuyitFixit Жыл бұрын
Valiant effort Vince. I've not worked on a PS5 yet, they look a bit of a nightmare tbh. On a different note INDUCTORS! (although I'm guilty myself of calling them coils still at times). Pity this one didn't come good, but great job in having a go anyway. Nothing lost, but more experience gained 🙂👍
@keithsmith7031
@keithsmith7031 Жыл бұрын
Don't give up on it so easy Vince, have a couple boards here myself i refuse to give up on. One i have is missing the voltage to turn on the ram and yet to find out what's supposed to send out the voltage to it. Yup i'm very much a amature with these myself. I think its 1.37 volts. You done alot on it so far and learning. Keep at it 🙂
@Zenefor
@Zenefor Жыл бұрын
Still waiting for VINCE to post another video of him breaking into a device running dubious android build.
@JamesPotts
@JamesPotts Жыл бұрын
Joking aside, the blue mat is much better for your videos' color balance.
@Radon57
@Radon57 Жыл бұрын
Is that chip at 47:28 looking bit odd? Or is it just flux or something.
@colinboneham7387
@colinboneham7387 Жыл бұрын
Great effort Vince, this PS5 was defo sent to test you, pass it to Phil for him to have a crack at, I have a feeling there is a small amount of Liquid metal sitting somewhere it shouldn’t be.
@xxDADDYDAYCARExx
@xxDADDYDAYCARExx Жыл бұрын
22:40 don’t call me Shirley!! 😉
@alext8828
@alext8828 Жыл бұрын
You know, having a screw loose, rolling around on the circuit board could do any number of maniacal things in there. I wasn't paying much attention to where that screw could have been traveling around. Is that a thought?
@Popdaddy580
@Popdaddy580 Жыл бұрын
Even if it's the first component you take off that clears your short it's the last component you took off. Just like when something is lost it's always in the last place you look 😊
@stevedeacon1213
@stevedeacon1213 Жыл бұрын
I wonder if all that black stuff all over the board was not soot from the burnt coil etc instead of liquid metal
@SeraphimCherubim
@SeraphimCherubim Жыл бұрын
"Never, never, never give up." Winston Churchill
@XaFFaX
@XaFFaX 11 ай бұрын
8:20 How and why would it affect resistances on insulated tracks? Through induction? No, not really. Even if it was not insulated such a small amount of dirt would not affect anything.
@AcornElectron
@AcornElectron Жыл бұрын
27:30 let’s all remember that Sod’s Law is only true because you stop looking after finding the thing.
@AJComputerServicesUK
@AJComputerServicesUK Жыл бұрын
Vince, Would the APU even get Power after removing the components that you have at 29:15 ?
@AcornElectron
@AcornElectron Жыл бұрын
Almost an hour? This’ll be a good one! Keep fighting the good repair fight Vince and, as always, stay safe!
@RandomTorok
@RandomTorok Жыл бұрын
Couple of questions for the group. I'm trying to fix a TV, I've found 4 blown smd resistors in the power supply. Blown so badly that I can't tell what they were. Where can I find schematics for something like this? The silicone mats that Vince uses on his workbench; Is that stuff available in a sheet form? I'm building myself an electronics workbench and was thinking I'd like to cover it with silicone.
@moonpig660
@moonpig660 Жыл бұрын
did you recheck the mosfet after it failed to fix it, to see if it shorted again before u replaced the encoder that it could be failing cus the mosfet is shorted again?
@rufus7704
@rufus7704 Жыл бұрын
People need to know rhis aswell about any games console. If you keep it on its side standing position, the thermal pasre on the chips will melt and slide off over Tim. Therefore burning them up
@shaunbrown1402
@shaunbrown1402 Жыл бұрын
Hey Vince don't look at it as a defeat, but more like valuable experience. That takes time, just think about the guy who tapped a machine and charged thousands of pounds. You know the old wise tale. Take it easy and keep up the good work. you're doing great.
@seesikopter
@seesikopter Жыл бұрын
Do you have a list of your gear somewhere? I like your hot air station
@dillonjelly3634
@dillonjelly3634 Жыл бұрын
I have a ps4 that one day stopped working and when there’s various methods that can make it work temporarily but it’s overall pretty dead, should I send it over as I think it could be a fun fix
@robsargent8611
@robsargent8611 Жыл бұрын
Hey Vince just wondering if you are from south of London or maybe Hampshire just with your accent?😀👍
@kotm3
@kotm3 Жыл бұрын
My mate Vince got PM! One day the r5 and roller will meet 😂👍💪
@ralphj4012
@ralphj4012 Жыл бұрын
Good attempt. I don't think I would ever call ebay, a friend. I don't think you mentioned whether you had the 1.8V reappear, which, I think, comes from the regulator near to the HDMI connector, assuming the CPU is awake and turning it on. He says, pretending to know anything about PS5's.
@mlaskowsky
@mlaskowsky Жыл бұрын
What are the different global settings? It looks like you can set it to different settings.
@R-E-D-A-C-T-E-D.
@R-E-D-A-C-T-E-D. Жыл бұрын
Time for me to sit down boil the kettle and grab a malted milk biscuit because this is going to be one interesting repair!
@FloppaCraft
@FloppaCraft 11 ай бұрын
Gavin!?!?!? You finally found him!?!?!?
@Jedda73
@Jedda73 Жыл бұрын
If you do further work on this console, I will happily watch it. Great video Vince, that was a lot of effort.
@AMCards23
@AMCards23 Жыл бұрын
Easiest way to contact you about possibly doing a trying to fix on a xbox elite series 2 controller , No stress about breaking it as already not used but would be amazing to have fixed ?.
@chrisstyles4630
@chrisstyles4630 Жыл бұрын
That's been dropped & the liquid metal has splashed out then someone has tried to clean it after burning the components you can see the liquid metal everywhere those little blobs are liquid metal
@JeffreyGroves
@JeffreyGroves 6 ай бұрын
I am not an authority on what makes up liquid metal, but I worry about the health effects of repeated exposure to it.
@borisdg
@borisdg Жыл бұрын
Nice. Something cool to watch on my afternoon. :)
@jake5808
@jake5808 Жыл бұрын
Question, vince is your sons name tom? Im wondering because ive seen someone in your videos who used to have a yt channel and stopped uploading the channel is tom&dan
@adrianwilliams717
@adrianwilliams717 Жыл бұрын
Watch more of The Cod3r videos, if its been dropped the liquid metal, can get under the GPU protection foam & rubber!!
@don4techy
@don4techy Жыл бұрын
No idea what current was being pulled to ground.
@sniperla_666
@sniperla_666 Жыл бұрын
The high Current have fried the APU!
@dragonbb83
@dragonbb83 Жыл бұрын
He's also missing the small cap next to the hdmi pins.
@Crazy-Games
@Crazy-Games Жыл бұрын
It must be important
@ClosestNearUtopia
@ClosestNearUtopia Жыл бұрын
Guess the commission will send you the certificates for electronic repairs very soon😮
@Mozekki
@Mozekki Жыл бұрын
Good job on the thumbnail and title! Should attract the younger gen!
@Dandan-tg6tj
@Dandan-tg6tj Жыл бұрын
It's a long time since I'm not fixing anything that looks like this PS5. If someone fucked their PS5 that bad they deserve to buy a new one.
@GapRecordingsNamibia
@GapRecordingsNamibia Жыл бұрын
You've been doing this for long enough now Vince, I think it's time you get yourself a new tool mate, get a milliohm meter, it'll show you more or less in greater resolution where the short lies, as it reads well below an ohm in detail, it'll help you trace shorts a lot easier. Keep heart mate,.
@gamernature
@gamernature Жыл бұрын
Maybe try to swap out that dodgy ribbon cable to see if the PS5 starts up then. It might be worth a shot.
@fmdof
@fmdof Жыл бұрын
that dreaded haitch dmi port
@djmasshysteria4833
@djmasshysteria4833 Жыл бұрын
i so annoyed if something as expensive as a ps5 and it wasn’t fixable can you imagine forget that 😭😭
@martijn4740
@martijn4740 Жыл бұрын
its a 12 volts line Vince so no problem putting 12volts in next time
@loveramesar9472
@loveramesar9472 Жыл бұрын
Not really. If one of the mosfet is shorted the apu will get direct 12v which will fry it instantly.
@martijn4740
@martijn4740 Жыл бұрын
@@loveramesar9472 nope it will not its shorted remember
@faizalshades4319
@faizalshades4319 Жыл бұрын
hi my mate Vince
@RandyDarkshade2
@RandyDarkshade2 Жыл бұрын
I find it amusing that my PC outlives modern consoles.
@bertlzansinger
@bertlzansinger Жыл бұрын
Wish this tech to be designed like being able to self diagnose. As every other regular person would have to scrap this product…
@andythehedge
@andythehedge 9 ай бұрын
What is Liquid Metal??
@Mikelp73
@Mikelp73 Жыл бұрын
It’s not easy for me to admit this but at 50 now video games have passed me by. I couldn’t tell you what games are even being made. When the ps3 was big I knew every game. Not now. I play 15 minutes here or there. I hate it but it’s just the way it is.
Sick PS5 - Can I FIX it?
56:54
My Mate VINCE
Рет қаралды 88 М.
Trying to REPAIR a Nintendo GameCube - Black Screen - No Disc Spin
39:13
My scorpion was taken away from me 😢
00:55
TyphoonFast 5
Рет қаралды 2,7 МЛН
Quilt Challenge, No Skills, Just Luck#Funnyfamily #Partygames #Funny
00:32
Family Games Media
Рет қаралды 55 МЛН
REAL or FAKE? #beatbox #tiktok
01:03
BeatboxJCOP
Рет қаралды 18 МЛН
This Nintendo SWITCH was Sent to TEST ME!!!
44:57
My Mate VINCE
Рет қаралды 65 М.
Can I Fix Viewers Random Broken items?
53:23
My Mate VINCE
Рет қаралды 86 М.
Got a PS5 for almost nothing, but it has a Problem
59:22
Slim´s Repair
Рет қаралды 138
Viewer Challenge: Fixing Your Broken Gadgets & Toys! Can I Save Them?
54:54
Trying to FIX: Water Damaged Nintendo Switch Lite from eBay
35:36
My Mate VINCE
Рет қаралды 228 М.
I Bought 9 BROKEN POKEMON Gameboy Games - Let's Try to Fix Them!
27:42
A Yacht TV Not Responding to WORKING Remote Control - Can I FIX it?
25:26
Broken DELL Inspiron 5475 ALL in ONE Computer - Trying to FIX
39:59
My Mate VINCE
Рет қаралды 90 М.
The 5 kilowatt Crown
46:21
Mend It Mark
Рет қаралды 563 М.
Crucial SSD Drive Failed - Can we save data.?
23:40
NorthridgeFix
Рет қаралды 1,1 МЛН
My scorpion was taken away from me 😢
00:55
TyphoonFast 5
Рет қаралды 2,7 МЛН