This Spray Gun Is INSANE!!!!!!! Walcom Carbonio 360 HTE

[@chrisyoung5275]

I love these guns! They spray so good, effortlessly!

[@TonysRefinishingTV]

They sure do mate I agree with that

[@watchthisspacecarchannel6523]

I’ve seen a few reviews of this gun , it does look to be an outstanding bit of equipment , If people like yourself didn’t get new guns , we wouldn’t get to see all the reviews. Great stuff Tony , love watching your videos !!!

[@TonysRefinishingTV]

Thanks man and exactly mate for me and you guys it’s new content and stuff to compare and look at I don’t see the problem with that lol , hope you are well man

[@johnsutton6975]

Ask your paint store for demos on new equipment. I’m a rep for Walcom on west coast in USA and demo daily in shops. That’s what we’re here for.

[@TonysRefinishingTV]

I prefer it for speed and material use too also I can achieve better results woth this but that just may be down to myself

[@paullx5574]

I just bought one , absolutely incredible gun

[@antonioneves5145]

When I start painting around 90,91 the devilbiss JGA was the gun that everyone was using. When the water base system started I change for the sata (nr 95) and since then I have used every single model till the x55oo that I currently owne a few and to be honest they do worth every penny. Apart from some models that I had some issues with the swivel joints they just last forever if you take care. Lately I have been looking into other brands and I bought the sagola 4600 extreme and I was pleasantly surprised. From walcom I bought the blower ( very good) and a digital gage and to be honest worked fine for a while but the digital bit that you plug in and off is leaking and the thread because is of a hard plastic is gone that's why sata beates every body else. One thing I work in London and there is no reps of walcom or sagola coming to the garage's and show us the product. If wasn't for KZbin I wouldn't know about this brands. Anyway I'm thinking about buying 2 new guns at the moment I work with sikkens, r-m, cromax, but we getting the spieshecker blue and get ridden of r-m for the mb so if there is any suggestions I would appreciate

[@davidwilliamson2490]

Hope the holiday was good tony good to have you back love it when you get a rant on when doing a review and i have been learning skills watching you since the days of the blue scooby and would like to thank you for skills i have learned over the years and hope to keep learning so a big thank you for all the time and effort you put in to create the best content for us

[@TonysRefinishingTV]

Thanks David and I don’t like going off on a rant just people give my arse a headache sometimes and I can’t help it 😂, and man your like a proper long term subscriber buddy so big Thankyou to you man it’s crazy to think there’s guys like yourself who have been here from video 1 man much respect to you

[@808autobody7]

You know what Tony? Big ups man! You are such a humble guy and great at tour craft. Not arrogant like someone who rhymes with shmunman. Always been a fan of your work and thanks for taking the time to do these videos. They can really make or break a purchase. Keep chasing gloss man. Aaaaloha 🤙

[@jimmypratt6450]

I agree with you, time off gets your head back in order unfortunately my time has n't come yet lol. I've been using my Walcoms on a daily basis and they're working well.

[@TonysRefinishingTV]

it sure does mate and great to hear buddy

[@Ynot72-x6o]

Ebay you can always find these guns lightly used for under 380 dollars So any type of tool can be found cheaper I've build up my tool with used or bogo sales

[@javierdanielmoreteau8522]

Hi Tony! Thanks for your video! I am about making my second steps in car paiting and I wanna do excelent work as a professional. Please, let me know wich sprayguns brand and models and paint brand I will need or do you recommend to get the best results, beside the prices. I want the best.

[@dkenneth5961]

Great review, I've asked you to do a review on this gun 2 years ago lol. I've been using them since 2006 and the Carbonio since 2016 they're cracking guns. Thanks for the videos I appreciate the time and effort you put into them

[@TonysRefinishingTV]

Hey man yeah I remember it’s not always in my control buddy when I can get the chance to work with certain guns and or firms buddy and I can’t always afford to buy them myself

[@jeffeaton5221]

I tried too find out what tip size you used. I also like for you to paint a larger object with gun like a 60's - 70's cadillac hood put it to a real test lol. I'v watched other youtube video's on that gun trying too decide to purchase one.

[@TonysRefinishingTV]

Lol sorry man I can only paint what I’ve got on at the time buddy

[@BearBudgetgarage]

Anyone that puts time and effort into a channel, and that channel gets a fair number of views, and people follow that channel...there should be perks! Be it pay for content or free supplies or whatever. Seems like a win-win and power to ya👍

[@TonysRefinishingTV]

Thanks man nice to know some of you guys appreciate the work that goes into it

[@garywalton3140]

Hi can you get a 3m pps adapter for this gun thanks in advance

[@TonysRefinishingTV]

Yea mate you can buddy

[@AliVapeReviews]

try the slim kombat HTE i love it

[@mikelmorgan6409]

If you have to buy a clear gun today. And the walcom carbonio 360 hte clear and the iwata ws400 are your only 2 options. Which gun would you choose base on your personal experience?

[@TonysRefinishingTV]

It would come more down to budget tbh if you’ve got an unlimited budget then the walcom of you’ve not then the iwata and plus iwata are a better firm in my opinion

[@husky1232]

Nice to see you back Tony a good break dose a person realy good and thank you for the review on this gun I have seen lots of reviews from others in KZbin and they all give a good review can I ask you what is the best clear coat to use with the ws400 1.3 thank you for the video stay safe

[@TonysRefinishingTV]

Pretty much any clear will work well with that mate tbh kapci 6030 multimix 2 alsorts fella

[@dougwernham5209]

Thanks Tony for a excellent review.

[@TonysRefinishingTV]

Your welcome Doug

[@juhis6969]

Wow man, absolutely awesome finishing💥💯

[@TonysRefinishingTV]

Thankyou

[@azacink]

Have you heard about their MP cap? It should spray flatter than the regular one.

[@TonysRefinishingTV]

Yes mate been using one today actually not quite for the sweet spot yet but I will in the next few days

[@jeremyoetken2094]

I got my mp air cap today. I sprayed it like walcom recommended. Close and Fast. It lays down a very nice finish

[@kimojoseph8057]

Awesome 😎 video Tony glad to see you back in the booth that walcom have have it lock 🔒 Tony flat finish lol 😂 although it’s pricey but it does deliver much love keep it up Tony all the best 👍👍👍👍👏👏👏👏💪💪💪🤙🤙🤙🔒🔒😎😎🙏🙏🙏🙏🙏💯💯💯💯💯💯

[@cillobodyrepaint2125]

Is this gun good for metalic or pearl?

[@pilbeam1uk]

Hi Tony, I see on the website that they do Clear and Base versions. What is the difference?

[@TonysRefinishingTV]

There isn’t mate both the same guns just labelled up for base and clear as we tend not to use the same gun for both and helps us keep our clear guns and base guns from cross contaminating

[@ANDY-we7mr]

Right tony whats the best for base and clear coat HTC 1.2 or sagola 4600

[@TonysRefinishingTV]

Hte 360 mate pips the post for me tbh as much as I hate to say it as I love the sagolas these are nicer guns

[@ANDY-we7mr]

@@TonysRefinishingTV tony on the HTC 1 .2 base and 1,3 for clear coat or 1.3 for base and clear coat both 🤔 👌

[@TonysRefinishingTV]

Both 1.2 mate

[@masoodamg6633]

Your work is really great

[@TonysRefinishingTV]

Thank you! Cheers!

[@michaelbekendam5449]

hey mate mick from australia here what pressures do you recomend for spraying 2k and clear also high build primer cheers mate

[@TonysRefinishingTV]

2bar for gloss or clear mate around 25 psi for base and drop it off abit for your drop coat

[@deanbrown7643]

Hi bud quite a few days since I've been online had a few work issues to sort cracking finish with that walcome still gonna use the aqua or is it redundant? ???

[@TonysRefinishingTV]

Still probably use it mate I think along side these as a decent spare base gun tbh mate , hope all is well mate

[@stevenlimbrick8122]

What are your fluid tip and fan set to?

[@TonysRefinishingTV]

Fan around two turns in from fully open , and about two and half turns out on the fluid

[@marshallallen72]

Hey Tony … I work in the RV industry and I have these guns. Do you know if they sell bigger cups for the guns because I find myself refilling my regular cups to much.

[@TonysRefinishingTV]

I’m not sure mate I doubt it maybe look into seeing if that do larger cups in a disposable cup system so it’s quicker to change over ?

[@richardcotton7114]

hey Tony do you rate this better than the sagola dvrs

[@TonysRefinishingTV]

it sprays a touch better but its not made as well and its alot dearer

[@stephenwhite5444]

Loving your videos man! Hey what brand base and clear do you like best? It seems like some shrink up a lot after a few days and end up looking orange peeled when they didnt when wet. In your video it looks very very level, did it cure out that way?

[@TonysRefinishingTV]

This was direct gloss Mipa I beleive but if don’t right abs dried right between coats then it should stay that way mate

[@jamiebman9578]

Sorry if I missed it but what tip size? Thanks

[@TonysRefinishingTV]

1.2 buddy

[@julianboggit1023]

Hi Tony, lovely job on those bumpers with that gun, just wondered what direct gloss you used on that job. Cheers.

[@TonysRefinishingTV]

Mipa mate this was buddy

[@julianboggit1023]

Thanks Tony for taking time to reply, much appreciated.

[@TonysRefinishingTV]

Anytime at all mate

[@rhyswells3500]

@@TonysRefinishingTV was it Mipa OC, did you use MS Hardner or HS hardner, I've just had Mipa WBC Scheme installed and I'm loving it

[@johnsax7986]

Would you pick this gun over a Sata 3000 or 4000 rp? Also have you tried the HA high atomization cap? Your thoughts? Great video by the way, you have the #1 spot for spray gun reviews as far as I am concerned!

[@TonysRefinishingTV]

I’d say better than both of those but not the 5500x mate I’d go for that over this gun tbh and I’ve tried the standard cap and mp cap for it

[@johnsax7986]

@@TonysRefinishingTV thank you for the info!

[@jimstanley7139]

Mate I don't care about wether you get spay guns or monetry donations given to you I'm a 62yo that is trying to learn spray painting and I'm learning g a lot from you so to all the critic's 🖕 you are doing me 1 hells of a service keep up the good work 👍👍👍

[@TonysRefinishingTV]

Thanks for the kind words Jim glad these videos really do help people

[@lummy321]

Brilliant Tony.... Are 0these better than the dv1 for base?

[@TonysRefinishingTV]

I can’t comment on that yet mate this was about the clear gun version

[@recruitmentwebsites]

Man you are a great painter :)

[@TonysRefinishingTV]

Thanks man

[@maskmonkeycustompaint]

nice work Tony, do you have a home made booth? and do you have heating?

[@TonysRefinishingTV]

No mate it’s a proper booth mate fully heated

[@jayakumarp.m.2596]

Which is this gun ?

[@stanleyonishi3314]

Great video Tony, did you shoot base with the hte clear gun?

[@TonysRefinishingTV]

The base and clear gun are the same mate just labelled separately, I’ve used the base gun and it’s very good mate

[@IratusAngelus621]

@@TonysRefinishingTV Yeah I originally bought a hte 1.3 for clear but found it a bit heavy so purchased a hte 1.2 which suited me better. Now using the 1.3 for enviro base and it’s awesome. In New Zealand the base guns are quite a bit more expensive than the clear guns so I just purchased a red air cape ring instead

[@fattoamanowoodwork3638]

wise words good man. nice video mate

[@TonysRefinishingTV]

Thanks buddy great to see you in the comments again

[@JohnWD40TC02]

Just watched this again Tony, great live chat last night as always but I have to give your vids a second look as with all the chatting I tend to miss parts of the vid. Personally I don't think it's any of our business if you get these guns for free or if you pay for them but if you do get them for free then you deserve each and every one of them mate as you give so much back to the community and by doing these reviews you are saving us money as I know you will always give an unbiased review which means we can buy a product on your say so knowing it will be reliable plus as you said the results speak for themselves and here the finish is first class. Have you tried the basecoat gun as well mate and is it as good as this? also compared to my GTI and DV1 I found the Kombat was a very quiet gun and had to keep checking to make sure the psi was right, is the Carbonio also quiet compared to other guns you have? cheers mate 👍

[@TonysRefinishingTV]

So as far as the base gun mate I’ve not had chance to test it for base until today on a training day with two guys and it seemed real nice mate but il test that more tomorow , as for noise I think the 360s tbh are a little louder than I’m used to but spray lovely so it cancels out for me

[@JohnWD40TC02]

Ok thanks mate, I cant really see any reason that the base gun wont be as good as the clear gun. The only thing I don't like about the DV1 is that compared to the GTI it's a bit noisier and uses more air but the bumf said the opposite for both 🙄👍

[@TonysRefinishingTV]

Lol well you did decide to go devilbiss mate 😂 sorry had too lol

[@JohnWD40TC02]

😱 Oh that was one swift kick in the danglies 😂 at least my guns aren't made of plastic!! 😜🤭😂😉

[@TonysRefinishingTV]

Lol mine aren’t there carbon fibre pffft

[@RPista]

is this the mp cap? thanks for the vid! ✌️

[@TonysRefinishingTV]

Think this was the standard cap mate personally I haven’t found a lot of difference between the two

[@maxmeyer74]

Hi Tony was this the new mp air cap?

[@TonysRefinishingTV]

No bud the standard air cap il be testing the new air cap from next week

[@norberalonso007]

Is a very very good spraygun 🥰🥰🥰

[@TonysRefinishingTV]

It is mate and hope your well buddy great to have you join us mate

[@tstuart7333]

CONGRATULATIONS. Absolutely honest sincere. If someone is offering or giving a freebie, it's I want something in return. ADVERTISING. Really appreciate your great work, honesty and [2] feet planted firmly on the ground. Lots of views will often think people here are out to make money. Not always the case. I honestly believe You are a 1st class professional master painter and teacher. I'm sure many will learn something from you. I'm not professional and already have learned so much. Thanks for sharing your knowledge.

[@TonysRefinishingTV]

Th am you for the kinds words Stuart and yes I try and keep things grounded honest abs transparent always woth viewers I want to build a good community that can help people here

[@annettegaskell4871]

Good vid mate that gun looks like it lays down paint lovely but it don't look as sexy as a ws400 or a sata 👍

[@TonysRefinishingTV]

Yeah I get what you mean man but let’s see what limited editions come out I love the black and white

[@stephenlebillon3066]

Could you film one of your training courses with a beginner using it to see result? Next video must include the following ”and next summer I’m off on holiday to********” Stay healthy 😃

[@TonysRefinishingTV]

Funny you should say that I’ve had two guys on a course use it today and they put out awesome work with the base and clear gun mate and lol I don’t go away that often man

[@fernandourias9507]

Nice good job

[@TonysRefinishingTV]

Thanks

[@lusario2650]

Better than sagola 4600 extreme for clear??

[@TonysRefinishingTV]

Personally mate yes I prefer it

[@lusario2650]

@@TonysRefinishingTV Damn lol. Just got the sagola last month and it has lived up to my expectations.....and now a new champ has arrived.

[@TonysRefinishingTV]

The sagola is a cracking gun mate it’s better I found than the rest I had when I was sent them so it’ll be a good investment mate

[@michaelbekendam5449]

with a 1.3 gun

[@TonysRefinishingTV]

yes

[@skipappapskr8252]

How flat? .. damn u gotta match the clear coat as other panels on the car it’s not all about flat

[@TonysRefinishingTV]

I did say that in the video

[@radudanielman]

👍👍👍

[@markg6jvy135]

👍👏👏

[@satamanschmidt3428]

Is this the original 360 Carbonio HTE or the newer Carbonio Light? Opps, I saw at the very end that it's the light version. I bought the original versions of both base and clear from PMPSupplies when they still existed. In America, these guns are unoptainium. NOBODY carries them. Sagola was that way in the States too but now has somewhat better distribution, but Walcom has virtually NONE. Gabe up in Toronto might be the sole source. Too bad as the guns are top notch. The complaint with the WS400 needing to have the fan turned in shows how retarded people have become. What's so hard about turn the fan adjustment knob all the way in and then back it out 1 3/4 turns. They have a line on the back of the knob so this is easy. Ridiculous.

[@TonysRefinishingTV]

Yeah the fan adjustment was always one of those issues for people and it seemed if people weren’t told they didn’t realise either which seemed odd to me coz you could clearly see it needed it on the fan pattern 🤷‍♂️ lol , and yes mate this is a 2021 light version

[@paulkelley7445]

USA sc

[@sats7819]

Eyop chuck

[@TonysRefinishingTV]

Lol evening

[@dropbear9526]

So. Knowing what you know now, for clear, Walcom 360 or Sagola 4600? I can't make up my mind. I don't care about price, maintenance or longevity, I only care about the finish and ease of use. ATM, I'm leaning towards the 4600. I have a Slim Kombat HTE for base.

[@adahoadaho5902]

ANI Black HPs

[@masoodamg6633]

👏👍

[@paulkelley7445]

USA sc