THIS Steel will Change Knives FOREVER.... | CPM Magnacut Super steel

Thanks to Manscaped for sponsoring today’s video! Get 20% OFF + Free International Shipping + 2 Free Gifts with promo code “DBK” at mnscpd.com/Dut...
Often new steels come out. Better edge retention, better toughness, easier too sharpen, more corrosion resistance but very rarely does a new knife steel come out that breaks the laws of sience... Introducing CPM Magnacut! This steel is no stainless based of it's chemical composition... but what if I said it is stainless? What if I said it's stainless yet has the benefits of a carbon steel? Yeah that's hard peepee material right there my friends! This steel might just be our new favorite!
Pre order a Magna Cut knife from Creely Blades!
bit.ly/CreelyDBK
Insta: bit.ly/CreelyI...
Join Our monthly giveaway Give-Away! Join the royal knife club to participate. THANKS!
bit.ly/DBK-Mont...
Subscribe to Mikkie B's band Wodan Boys!:
• WODAN BOYS EP RELEASE ...
Check out TJM Metalworks
bit.ly/TJMDBK2
Article on Magnacut
knifesteelnerd...
Check out our newest Partner Tools for Gents!
bit.ly/Tools4G...
________________________ Shops!________________________
Support us by buying from our shop!
bit.ly/DBKshop
The NL5 provided by one of our favourite shops BladeHQ!
shrsl.com/20i50
BladeHQ Channel: bit.ly/DBKmeets...
Awesome shop in Europe
bit.ly/Tools4G...
________________________ Check us out!________________________
Support us by buying your Gear here (affiliate):
shrsl.com/20i50
Check out our Patreon Give-Away and support the channel:
bit.ly/DBKPatreon
hidden message: Mikkie is an ugly unwanted child
Discord!: bit.ly/dbkdiscord
Insta: bit.ly/DBKInsta...
FB: bit.ly/DBKFacebook
____________________________Music:_____________________________
Pjopen: bit.ly/PjopenS...
Voice over by Anthony Marantz
bit.ly/DBKVoic...
___________________DBK News and Reviews_____________________
www.dutchbushcr...
#CreelyBlades #MagnaCut #Best

[@DutchBushcraftKnives]

Thanks to Manscaped for sponsoring today’s video! Get 20% OFF + Free International Shipping + 2 Free Gifts with promo code “DBK” at mnscpd.com/DutchBushcraftKnives Checking them out will help us too! and uhh... yes I use one myself too. No cow can eat from my lawn

[@wild_goose_0285]

Can we have a video where are you guys wear Clogs throughout the entire video?

[@LegionTacticoolCutlery]

Very nice!

[@joshalmightyblades]

The add in the beginning was f'king brilliant! I died mate, mad lads 😆 🤣

[@danielhristov6175]

Make a rust resist test plz

[@actionimme]

You should do more Ads!🤣😍

[@KMV007]

Mikkie: We are not reviewing this knife… The knife: That’s damn right, I am reviewing you!

[@shenanigansofmannanan]

The energy, charisma and chemistry these guys have together is the real reason we're all here....the fact they geek out over knives is just a bonus

[@son-of-a-gun]

They are stoned...

[@case4444]

I've made several knives with Magnacut and I can attest to how well it sharpens. I've gotten some of my best edges ever with it - just off an 800 grit silicon carbide stone.

[@tacticalcenter8658]

Tbo the least amount of Austenite will make sharpening easier. Many other factors involved but with the right ht can help most steels. Some compositions are easier to ht than others for low Austenite.

[@WhyamIstillwatchingyoutube]

You guys better never quit these videos. Great reviews, Great friends and for years now, always part of my routine. Great steel indeed. To much money for a tool but very nice. I just couldnt use it and would feel the need to return it, sell it or put it away so when I die someone else can have it. How insane is that!?

[@Kdubbzism]

You don't value yourself enough! What is the matter with you enjoy everything life has to offer, including knives and very fancy amazing steels.

[@originsmaster8140]

I mean this blade steel was created to be abused and continue to perform. The only 10/10 knife they’ve done and a knife that even if you use it a lot, you can still leave to your kid. It will most definitely last you a lifetime.

[@Spruce_Bringsteen]

Pass a perfect blade on and it's just a blade. Pass on something used, carried, and cared for and it'll reflect you.

[@Mikkelltheimmortal]

I've been watching you guys for so long I know when you are lying or not. Your excitement is genuine and infectious. I want one so bad now and I've only made it a few minutes in

[@wesleysnider2915]

Nice, I have read about this new steel 2 weeks ago and now you test it. You are on point with your videos. Stay sharp!

[@johnfletcher9835]

Martins girlfriend is a riot. She said that with a straight face. How many takes for that shot? She needs to be on more often.i really rolled on the floor when she cut his hair last week. Love the channel. I look forward each week for your videos, so I can get a good laugh and learn something. Thanks again Buzz

[@holis111]

You guys still doing great, has been long time for me. However my lionsteel M5 as recommended by you is doing great after some survival modifications. Your hair test it is absolutely insane!!!

[@greasepipe9999]

I’m still trying to get a normal bark river manitou, but now I’m trying to get a magnacut manitou, this steel is crazy!

[@DutchBushcraftKnives]

i want a manitou too!

[@jhtsurvival]

@@DutchBushcraftKnives I want you

[@pedroflores5144]

I've been watching eBay for a Bark River Canoe in CruWear...I'm about to pay stupid money to ship one from France :o(

[@MrJorddy123]

Idk why Every time I watch 1 of your videos I feel I’m missing out or something by not hanging out with you guys lol. You guys have a fun friendship 👍

[@mikeyeaton1914]

I have two sheets of this steel ready to go once my shop gets up and running! Can't wait to put it to the test!

[@mrkiky]

How fancy does the heat treatment need to be though?

[@mikeyeaton1914]

@@mrkiky To be honest with this new stuff I'm not going to play around. All the blanks will go to Peter's heat treat. Already called and spoke to someone on site, they assured me they know how to treat it, fingers crossed!

[@loveall3890]

Good luck with the shop my friend.

[@bluegrasssurvival9423]

@@mikeyeaton1914 IMHO, I think that 61 rockwell hardness might be the sweet spot for a fixed blade, where 62.5 would be better for folders. I like my fixed blades a tad softer so they can endure abuse if necessary.

[@billandrews]

Has anyone noticed that the commercials are more entertaining than the show?

[@Dynotop1a]

I’ve seen some very knowledgeable people show MagnaCut to be similar to CPM-4V, especially in its microstructure, but stainless. They group even closer together in edge retention and toughness according Larrin’s testing (author of Knife Steel Nerds and creator of MagnaCut for those who don’t know). Give or take according to heat treatment, Cru-Wear is the next most similar with a little better toughness and a little less edge retention at the same geometry and edge type. MagnaCut is certainly one, if not the most, well rounded high performance steel. I look forward to trying it in the future, but will probably get something in 4V first like the Spyderco Province in order to get a feel for it myself. That way I can be confident once it’s better available. A steel like this will be perfect for bushcraft/edc fixed blades in the humid and salty environment I live in.

[@whynottalklikeapirat]

You sleep on the beach?

[@Dynotop1a]

@@whynottalklikeapirat I live on the Florida coast so sorta.

[@whynottalklikeapirat]

@@Dynotop1a Salty dawg

[@hadmatter9240]

@@whynottalklikeapirat LMAO! Welcome to reality.

[@whynottalklikeapirat]

@@hadmatter9240 What are you even talking about

[@christopherfisher128]

Ease of resharpening? Like if I'm out in the bush and just have a pocket stone; how hard is it to put the edge back after I win a fight with that Kodiak that was eyeing my goats?

[@NOS2IeX]

3/10. with a stone almost impossible 😂

[@Imagin3WhirledPeas]

I don't care what steel the knife is, you can't get an edge that good with a pocket stone.

[@christopherfisher128]

@@Imagin3WhirledPeas Not on a steel that hard

[@robertfandel9442]

I'll stick with my old cold steel master hunter carbon v

[@christopherfisher128]

@@robertfandel9442 Cold Steel has been sold and they are using Chinese materials and labor now. Get as many of the older models as you can before the inventory is completely gone. I purchased some replacement Tru Flights for ones I've had since they came out and even just a month between the first and second one the steel went from 1055 to the Chinese S50c

[@hughclarke8634]

When news on magnacut came out I reached out to TRC asking about if they were considering experimenting with it, but no response lol. CRK and Spyderco have seemingly at least played with it a bit, though.

[@NosZodd666]

Bark River Bushcraft Scout Pre-Order in Magnacut was just released on DLT! Just ordered it, can't wait to try this new steel out!

[@Cz82]

Oo boy can't wait till this gets into more knives 😂 damn it I just bought 3 knives this channel is enabling my knife addiction

[@Wanderingsamurai_life]

Lol sometimes i have to stop watching dbk. For my wallets sake

[@greekveteran2715]

Vanadis 4 Extra and 52100, tick more boxes, for an ideal steel choice, for an outdoors knife (anything exept fishing and that's where Magnacut is the better choice). Ease of sharpening/repairing, is usually ignored, however, it's one of the most important things to consider, for an outdoors knife. Vanadis 4 Extra, sharpens back, like a Carbon steel, which is crazy for it's hardness and edge retention it provides! Ballbearing steel, is the love of my life. Next follows Vanadis 4 Extra, then CPM Cruwear, then CPM 3V. The first 2, are the best material for outdoors knives, I've ever tried.Crazy good stuff! PS Steel is the last, in terms of importance factor, to consider when choosing a knife.

[@jamesbarisitz4794]

Amazing steel! The first 10/10! Killing a chicken twice! Great episode guys.👌

[@Yellwolf]

Loved the chicken anything! And wow the introduction to a new… knife.. (steel) I also noticed the kindness increase… you two are so much better that way… (no one was blaming the chicken walking into the fire) best show ever.

[@OneGodoneIsrael]

I’m new to the science of knives, but this has to be the best knife channel. 👍🇺🇸

[@zoroutdoor9]

"Nothing survive to survival Lilly" man that's a new Murphy's law. It should be on a t-shirt

[@saigudbai]

Very interesting write up on KnifeSteelnerds about how Dr. Larrin designed this steel. It has the great toughness/edge retention of non-stainless steels like M4/Cruwear/4V but manages to keep all the chromium in solution instead of forming carbides, so it has excellent corrosion resistance and is classified as stainless.

[@saigudbai]

@@jeffhicks8428 Actually I believe he works in the auto industry. Knife steel is just a hobby and he approached Crucible with the Magnacut idea.

[@chloehennessey6813]

@@jeffhicks8428 Which steels did you invent or make? Are you a known quantity in the steel industry?

[@piclesmcflubber]

Clicked on this video on accident and was about to view a different one. Until it started ended up watching the whole thing and you have a new subscriber for sure. Awesome content!👍🏼

[@avim4896]

Thats my story too, Cheers 😉

[@bbcustomsdt8577]

Do a morakniv kansbol review

[@Rootori4]

yep, that where awesome.

[@grumpyuncle.]

By far, the best manscaping commercial ever. Brilliant!

[@sksupply]

The world will be destroyed unless Bark River knives are back in full production. Nice knife.

[@ericpitre4031]

Completely??

[@guylewis7418]

Cats and dogs, living together, Old Testament, wrath of God…

[@sksupply]

@@ericpitre4031 Absolutely

[@HalfInsaneOutdoorGuy]

And bark river fked themselves with their liberal politics.

[@Mike-ul1xn]

i love my 3V knives, but when you think about it, all these bushcraft and survival knives made out of super steels that are nigh impossible to sharpen in the field/austere environments kind of defeat the original purpose of the tool. People complain that LT Wright's A2 is treated too soft, but that's only so users can sharpen it in the bush with whatever materials may be on hand.

[@Unicorn161]

Just carry a small diamond or ceramic hone in your pocket, bag, or a pouch on the knife. What do you expect to find in the bush? Re you thinking a river rock?

[@Mike-ul1xn]

@@Unicorn161 I live in CA so I haven't been able to get out into the wild this year because of the fires, so I've been watching a lot of youtube and episodes of Alone. It amazes me how easy it is to lose a ferro rod or diamond plate. It just seems to me like original idea for these knives was if you find yourself in a scenario without specialized tools.

[@greekveteran2715]

@@Unicorn161 Ceramic or leather can only hone, the problem is, when the knife gets really dull or gets edge damage. That's when a non Super steel wins in the field, to a knife made with Super steel and hardness of 60 hrc and higher!

[@IronCan88]

Do you guys see how difficult it is to loose sharpness on this steel? Chances of you having a dull knife in the wild is so slim, unless you just decide to go live in the wild for years without any equipment.

[@jankevinbautista]

Mikkie's reaction cutting phone paper after 15 cuts is the truth for this knife's sharpness.

[@MrCander000]

Happy Thursday knife lovers.

[@chrismaynard8600]

DBK makes Thursdays awesome

[@danielhristov6175]

@Dutch bushcraft knives Genlemen please test the knives rust resistance. Use saltwater and 🍅 ! Over a long period of time please. Thank you

[@ZackPvalta]

Just last week I thought about asking if DBK could test MagnaCut. I thought it was nearly impossible to get since it's so new.

[@bluegrasssurvival9423]

Magnacut is going to change the knife world mark my words. I think Crucible knows it too, which is why since 2022 they have been making this steel as fast as they can. Now we need to wait till someone cracks the magic rockwell hardness code for this steel.

[@statusquofugitive8554]

I like how you shot the blade but I’d love to see how it does being thrown into a target. Will it bend the tip? If not then it’s perfect IMO!

[@benningsniper9516]

I regularly have the need to throw my knives. You know because... reasons.

[@toguidver6704]

When I bought my Condor Bushcraft knife, it was $25 and it's still going strong 20 years later // I can't see paying $200 for something I might loose on the trail..

[@autumn5592]

You may not, but I would happily spend that much for a steel that is significantly better (edge retention and toughness) than your average 440/Aus-8/8Cr13Mov steel.

[@chloehennessey6813]

I just ordered a 4”x36”x.270 sheet of this off NJSteelBaron. I’m making myself a chopper with it. Can’t wait.

[@nandayane]

CPM 3V was one of the design inspiration for CPM Magnacut.

[@spookhol]

7:15 Mikkie : "A tiny tiny nic, not racist" Typical brutal Dutch humor :-)

[@dztripp2491]

Your excitement is contagious. Always look forward to these videos.

[@johnsmithfakename8422]

I like the technology behind CPM 3V because it is very interesting. I also consider 0.8% carbon to be the sweet spot for knives. What I don't like about CPM 3V is that it is exceptionally difficult to work with (shaping and sharpening it). I like that it is borderline stainless steel.

[@matthewkuhl79]

CruWear improves upon 3V in terms of ease of sharpening

[@tphvictims5101]

OKAY, you guys have TOTALLY LOST IT. the commercial is funny as HELL

[@vindice5849]

I've got a magnacut spyderco coming soon and am super excited to make handles and sheath for it

[@slick_slicers]

I do wish Rockstead would send you a knife to test. According to them, it should ace your rope test, but I’ll only believe it when I’ve seen an independent test (you or Cedric & Ada). Come on Rockstead, step up to the plate!

[@tacticalcenter8658]

Check out Outpost76, Tom hosting outdoors, and Super Steel Steve cut testing. They often get hrc tested, sharpen past the burnt factor edges and test with cardboard to factor out behind the edge thickness that rope cutting is highly varied with.

[@emesser7087]

Only thing I need to know now, is it very hard to sharpen? Or is it possible with normal oil or water stone and a strop in a good time?

[@svenvanderzwaag1012]

It is super easy to sharpen for a supersteel

[@greekveteran2715]

@@svenvanderzwaag1012 All Super Steels I've tried are super easy to keep sharp with a ceramic rod or a leather strop. Problem comes when the knife gets really dull and/or when the edge gets damage. That's when the "non Super steels" have a huge advantage over the Super Steels and that's when those common steels. can be kept sharp in the field, while the Super steels can not. (Except if you carry diamond stones and got a lot of time, patience and a stable table out there in the field! lol)

[@svenvanderzwaag1012]

@@greekveteran2715 yeah i heard that quite a lot. I'm not here to start a discussion, but I disagree with you. First of 1095, 01, d2 and all other good old tool steels are not a comparison with super steels like magnacut, cruwear, m390, 3v etc. They are just totally outclassed. Next up the performance in the field. First a knife with a good super steel won't go really dull on you in a longggg time. You can take a cruwear machete into the jungle for 2 months and it will still be sharp lol. Second if you want to reprofile a blade with tool steel you will want good sharpening equipment too, so I don't really get the point. How else would you want to sharpen a tool steel? With a brick? Also super steels are often not that hard to sharpen, even in the field. There are a lot of portable sharpening systems with little diamont stones that do wonders on super steels. Come on man, tool steels served a purpose and they still do as a cheap alternative, but they are just outclassed in every way.

[@greekveteran2715]

@@svenvanderzwaag1012 You didn't get exactly what I meant, Also, you have confused steel types/categories. 1095 isn't a tool steel, it's a low alloy steel belongs to a different category than D2. Also CPM Cruwear, isn't a in the same category you put it with all those Super Stainless steels. As for the field maintenance, you can easily maintain a 57 hrc 1095 (AND fix any issues like edge chipping) also you can bring it back from realy dull state, to super sharp without needing a stable table, 2 hours to reprofile it or sharpen it from scratch, as if it was a Super Stainless or Power Metallurgy steel at higher than 60 hrc that they ussually are. You simply can't spend so many hours, and normaly common man, doesn't carry, or have YOUR skills, to maintain such a steel in the field.

[@svenvanderzwaag1012]

@@greekveteran2715 you get what i mean when i put 1095 in the tool steel category. Also yeah cruwear is not super stainless, but I also mentioned 3v. I don't get why you are making a problem out of that and also it is totally besides the point of what I'm saying. The argument "A super steel cant be mantained in the field" is simply not true. Super steels might take a bit more time, but you dont have to mantain them for a long time. Also the argument you need expensive tools or knowledge is simply not true. You want to sharpen or reprofile your 58 hrc knife in the field? How do you do that? With a stone or a sharpener. Just get a little bit of a coarser one for you super steels and your done. You dont need hours like you say. If thats you, you are really doing something wrong my friend.

[@ValorantRivals]

These guys are pros, like they mess around but they know the more then most KZbinrs

[@marksaint2936]

I'm really getting into the Wodan Boys sound. It's the CPM Magnacut of new music.

[@michaelnolan22]

“This chicken skin is giving ME chicken skin.” That got me

[@billwessels207]

"Wow"' you are truly a genuine hairsplitter!

[@lewisyouknow]

I doubt it will, but a good step in the right direction

[@brinkerland736]

man, another steel I have to get. going to stay broke LOL

[@isaiah_b_3798]

Ah but you'll be rich in blades

[@jeffcon123]

I’ve been seeing magnacut come through my heat treat facility. I’m a vacuum heat treat specialist and ALL the magnacut has been knives so far

[@thomasmacginnes100]

we saw M A show off his magnacut’ sword a few months ago or more ! i guess he was’nt kidding about its attributes .

[@Brandon56896]

DBK is not gay.

[@daddychill7776]

ButchDutchCraft Knives

[@Brandon56896]

@@daddychill7776 😆

[@masterofthepinkside]

best manscaped aad ever. By a lot. Manscaped should give you guys extra money for that.

[@derunwissende147]

Are there still ways to pre-order the DBK knife?

[@BeSatori]

Will it spark off flint?

[@azaba2007]

excellent question that needs urgent addressing

[@timwhite5562]

MagnaCut does seem like the ultimate steel. From what I've gathered, it's basically M390 with twice the toughness. I LOVE m390, the last decade I've been using a Benchmade barrage 581, and Lionsteel M1 and M4. I love them, but an always aware of the limits of what I can do in relation to it's toughness. This steel seems like it has no deficiencies. I've been surprised at the price of some the knives I've seen come with it, they're not nearly as expensive as the performance of the steel would lead me to think.

[@jeffhicks8428]

Unless you've actually used and tested the stuff for yourself I wouldn't be forming any opinions. And definitely don't base your opinions on something based on what the company who sells it, or their employees, have to say. Like no shit Larrin is going to hype his companies products and downplay the quality of stuff offered by other majors like Hitachi.

[@topfueljunkie100]

@@jeffhicks8428 With that said, have you personally tested it? Can you share opinions based off your own testing?

[@whyillustrated5610]

​​@@jeffhicks8428All Hitachi steels are pretty low tier, super blue is very brittle compared to just about any other steel with comparable or higher edge retention. Zdp is far from the best of high wear resistance steels. They are great at fine grain structure though. Nice to sharpen.

[@slackleashdogtraining3598]

My freind I like the way you said your word play; but if I may, the way we say it in N. America is “Cutting Edge Technology”. But I will be saying “Edge Cutting Technology” from now on.

[@dermessernerd5898]

I guess, I'll stay with K390 as my personal favorite super steel.

[@jkanecutlery]

K390 is wonderful

[@dermessernerd5898]

@@jkanecutlery , oh yes, ist is. I got two Duloknives Customs in K390 and I love them very much. Especially the one with a convex grind. It's just a pleasure to work with.

[@IronShadow93]

Shame. A man of culture always shaves with a straight razor. Always.

[@Uberragen21]

I only shave tyrants with a straight razor... 👀

[@pennsyltuckyreb9800]

False. An axe. 🪓

[@IronShadow93]

@@pennsyltuckyreb9800 if you're a Viking that is. 🤔

[@toejamr1]

Mickey sounded like Vertuovice at 9:19 lol

[@roguesheep1747]

LC 200N is my new favourite knife steel

[@user-mb3hu8pl8j]

DBK, F@ck yeah!!

[@knifesharpeningnorway]

I have a custom magnacut knife i love on my channel awesome steel for sure. Awesome video mates

[@mikeogden5256]

I’m very excited about new street

[@chrisstreet1994]

That edge cutting is cutting edge!

[@maxlvledc]

I was wondering when you would get it in your hands! AND Suretouch!

[@TheAnonymousSword]

I think the new lionsteel m4 in magnacut will be really great. Also ug tools makes the tiny in magnacut now. To quote „master and commander“: what a fascinating modern age we live in.

[@OneGodoneIsrael]

I’ve never given a thumb up out of the box, so we’re even. 😂👍

[@jasonjulian1]

Wow just wow. That steel.... Incredible.

[@mrnobodyjo]

Lets hope it will be well priced and brings the industry together to compete to create even better steels and let the customers win.

[@powersn8n]

Ok, so now I have to have one of these…. 🤯

[@floridadad2817]

There's a stealth run of 1000 Buck 110s in Magnacut going on right now. DBK, if you don't get one in time, I ordered an extra for you....or one extra for me if you don't read this. I don't care. I do what I want. I'm from Florida. We crazy.

[@JiiJiitalo]

The only problem with magnacut is, that its sold out everywhere! Its designed by metallurgy dr Larrin Thomas especially for knifes, to have superior balance in every aspect (hardness, corrosion resistance, edge retention, toughness). Im a custom knife maker, and the real problem is that magnacut isnt sold in europe, and its allso soldout in states from every seller.

[@funwithpens43]

Its already time for the DBK Knife 2.0 in Magnacut ;)

[@josepholson3539]

I asked Svetlozar to make a DBK knife one extra centimeter handle 3 extra centimeter blade in CPM Magnacut

[@christofferaateigen7543]

Maarten looks like every gangster debt collector in Norway

[@martingarcia709]

BARK RIVER Aurora Scandi MagnaCut…..is coming soon, I hope ! What else 😌 Thanks DBK, you guys inspire knife lovers, nice job 👌🏼

[@DudesIn101]

Baddest Blade on the fuckin planet boys,

[@rwstubbz]

This is great news for knives. When you're building off of something like this, the possibilities become wider. Bringing the triangle of steel usefulness, strength, abrasion resistance, and toughness to a new level. Thanks Larin

[@Nudel-nc1cp]

Are you sure about that triangle? Shouldn't it be like this: toughness, corrosion resistance and edge retention.

[@rwstubbz]

@@Nudel-nc1cp yes probably

[@stefthorman8548]

Nah, toughness, corrosion resistance, ease of sharpening, and edge retention.

[@timothyvolkers5343]

I just watched a video from the knife center channel where he mentioned this same steel and how amazing it might be. So it's cool to see that this steel is as good as David from knife center thought that it might wind up being.

[@jordy703]

Holy shit! I cut my eyeball just by looking at the edge!

[@markedeloy]

The commercial for manscaped alone was worth watching this video, THEN you gave a 10/10 🙀

[@sirsm0key417]

I died laughing when the chicken fell 🤪😂 - thanks for all the videos over the years. I have purchased a few because of your honest trustworthy reviews. I’m going to have to get one of these now. Arctic weather is rough

[@chrische]

I‘m watching your channel for some time now. It‘s entertaining, funny but highly informative. Actually it was because of this video I bought a Lionsteel M4 (guess what) made from magnacut. Maybe you‘ll do a video about that one? Greetings from Germany, Bremen

[@AudibleVisibIe]

14:22 sounds like he just listed off 3 Dutch surnames 😂

[@MagosOfTheLuminary]

the lilly jibe lol

[@AudibleVisibIe]

Love the videos guys. But at the end of the day, steel isn't everything. Edge geometry is just as if not more important. Also heat treat. I know you guys understand this though, jus ahd to mention it. Keep up the killer videos fellas

[@greekveteran2715]

Blade importance is like this: Heat treatment > Blade/Edge geometry > Steel. So , you're techically right!

[@j.savage1228]

I long to sharpen this new steel on my waterstones. 😍

[@bennyc409]

I've got a Creely Mako in Magnacut on order through his Kickstarter campaign. More than a little excited...

[@codyprescher1857]

Compare it to k390

[@bradl45]

Thanks for the video. I tend to have pocket knifes that have more stainless properties, s90v, s110v, 20cv, etc. and outdoor fixed blades that I use on wood are 3v, I'm not a rust fan, my older 1095 stays in a drawer :( Will we see Magnacut in lots of folders, and for tough outdoor fixed blades too? I can't wait to see where Magnacut goes. I have a PM2 in cruwear, I LIKE it! I have nothing in magnacut yet. Shaman in magnacut please, and I'll be watching for more magnacut video's HERE!! So the stainless steels suffer the most in the shooting test? Ya, I cringe during those tests, love them.

[@rickjohnson4009]

Great now another knife I need to get

[@dndjsjs2014]

Love the videos. DBK does an awesome job

[@lukasparo194]

And I finally got my billet coming after months of checking for it to be available ;) I cant wait to make a blade

[@MrAquamarine]

Tried CPM S125V........ Master

[@pancakesafterdark3335]

INFI is pretty stain resistant, tough as hell, sharpens easily, and holds an edge relatively well

[@larrymarsico4059]

This is FANTASTIC!!!! Great Video/Review once again, as always mate's!

[@trolluer]

When is it purchasable in france???

[@chrismichellijr9217]

Magnacut for the win! Incredible 🤩🎉

[@timb8970]

Looks like a really nice knife, but $389!!!!! Is there any chance Creely will be coming down on that price? Maybe charge $275 ish??