On the Lathe Chuck, I have experienced no difference on tightness, I have tried both ways many times to see if there is a difference. On the Drill Chuck, I have experienced a big difference in tightness, I get far less slippage if I tighten all three spots. Thank you Lyle for sharing the great stories.
@roylucas102710 ай бұрын
A cup of coffee and time spent with Mr. Pete. Ah, a wonderful way to start the day.
@LostAgain197010 ай бұрын
Even if you "only" have a few thousand viewers per video, I can guarantee that those of us who do watch are genuinely interested in what you do. We are loyal fans, plain and simple. Thank you Mr Pete for your interesting AND funny channel! Your ironic rants about things are always hilarious and really spot on. They make me laugh a lot.
@mrpete22210 ай бұрын
Wow, thank you!
@duron700r10 ай бұрын
Lost, you nailed it!
@johnkemas734410 ай бұрын
I fully agree!!
@stevelarkin32910 ай бұрын
Mr Peterson : You do sooooo much for us , to teach us and help us understand , What can we do to help you !! Your video;s and comments are priceless to us all !!!!! Please let us know .
@mrpete22210 ай бұрын
Thank you very much indeed
@ianbutler198310 ай бұрын
Watch every video, leave a comment, and give them a thumbs-up. All free and really supports his channel.
@peteengard996610 ай бұрын
My dad was a tool grinder at Cleveland Twist Drill then an independent shop that specializes in the Aerospace industry. He taught me that if a chuck has 3 holes that you use all 3. Snug the first and then the others progressing tighter. I've never had a bit spin until the keyless chuck.
@stevebosun741010 ай бұрын
Hi Mr Pete, please don't stop doing stuff in the shop. Thanks for the covered bridge update, keep them coming.
@paulhunt59810 ай бұрын
A Mr. Pete notification is still the most welcome thing that shows up on my phone! I will be late to the shop this morning simply because your video is more important than my projects. I saw a national news report in your covered bridge. A few Amish men would solve the reconstruction problem in quick order and probably maintain period authenticity better than museum curators. The fond memories triggered by your influence on the man selling his shop was a good feature in this video. I find encouragement when I stumble across the effect in a young person's life that I know originated by my influence. That may be the best part of being a teacher. No one else may know, but you do. "This and That" keeps the running stories alive. You are an interesting man. These stories let us know about you.
@mrpete22210 ай бұрын
👍👍👍
@johnquinn389910 ай бұрын
Hey Mr Pete, always enjoy your videos. My niche is working on & repairing old tractors - cleaning, removing broken bolts, machining new parts, prepping & painting. All of your “tidbits” are a result of your experience and input them to use immediately. There are a lot of people putting stuff on KZbin and some of the presenters are making similar comments. I can’t wait to see what Mr Pete is showing us this time. John
@mrpete22210 ай бұрын
👍👍👍
@rustymachineshop945610 ай бұрын
Mr Pete tell everyone to like your videos that's what brings your videos up so people can see them. Likes are more important than subscribers
@neilw2O10 ай бұрын
Tightening 1,2,3 centers the scroll in the same place each time. I centered my scroll outwards on a ring, then ground the inside of the jaws, then held a piece of preturned 3/4" mild steel in the tail stock, and very gently tightened the jaws on it, using tighten #1 hole, and added grinding paste, lapping the jaws progressively. Now I can put a workpiece in it, and tighten #1 and it runs within 1/2 a thou. Tightening the same jaw # always puts the scroll in the same place. Learned this from a jaw manufacturer 45 years ago.
@TheUncleRuckus10 ай бұрын
Congrats Mr Pete you deserve a lot more than 300k! 👍👍 Don't worry about the algorithm just make the videos you want make and we'll watch them. I watch every video, except for petebay as I'm poor and can't afford any of the beautiful tools you're offering.
@mrpete22210 ай бұрын
👍👍👍
@theseldomseenkid625110 ай бұрын
@ThatUncleRuckus Even if I may not bid on Petebay, I find it worth iwatching. The steam engine was awesome and inspirational. I was laughing at the last one because I have a similar Dayton that is up for auction, and I also have a large box of brass fittings taking up space.
@jenniferwhitewolf378410 ай бұрын
Still here, still watching, and will till one of us passes on to the next journey👌👍 Really like the anecdote videos.. Please make more.. We hard core viewers love them.
@mrpete22210 ай бұрын
👍👍👍
@johnjohn-ed9qt10 ай бұрын
Tightening a chuck: I was taught the three position method in trades, and have found that with sloppy or worn chucks, I get definite movement on the second hole every time, telling me that it helps. I haven't found the same on good chucks. The old Cushman 3-jaw scroll chuck for my small lathe (it is compact, so it get a fair bit of use) won't center the work well if I don't use all three holes, but my new-ish Bison doesn't care. I had one of the HF chests for years. It was fine. Over time, the drawer bottoms took such a set that the drawers wouldn't open easily, but, then again, I loaded them with drills, cutters, and tool blanks. I finally tossed it when a drawer front pulled off while opening it a few years ago. Lasted at least ten years. I'd need to get 70 to 150 years out of a new Gerstner.
@mrpete22210 ай бұрын
😂😂
@dennismichas28510 ай бұрын
Hi Lyle, your videos are never boring 👍👍
@mrpete22210 ай бұрын
Glad you like them!
@JaredAF10 ай бұрын
You should set up KZbin memberships. I'm sure those few thousand very loyal subscribers would love to support you directly rather than relying on ad revenue
@mrpete22210 ай бұрын
I see too many KZbinrs doing that, and I find it objectionable. It’s too much like begging.
@daveharriman275610 ай бұрын
Congrats on the 300K, should be more, but I watch everything you put out, always enjoyable, humorous and informative, long may you continue!
@mrpete22210 ай бұрын
👍👍
@100yojimbo10 ай бұрын
Keep doing what you are doing Mrpete I always look forward to watching your videos and seeing what interesting things you do. 👍👍👍👍
@dcraft123410 ай бұрын
Can you imagine a stadium full of 5 or 6 thousand people, all listening to you? You can teach something, and 13 years later someone can find your video and learn the exact same information. Generations of machinists can learn from the same man. Amazing.
@llapmsp10 ай бұрын
Another great video. Thanks for all you do.
@michaelslivensky874110 ай бұрын
Mr. Pete, I watch ALL of your videos, except for the PETE-BAY videos. as I currently only have a chineseium minilathe that I just refurbished and most of your tooling plethora is just too large for the setup I have. Please keep posting the anecdote videos too, because unlike others, I like hearing stories from earlier generations. they always contain some type of wisdom and or learning. So long for now. Love and GOD Bless you.
@mrpete22210 ай бұрын
Thank you and God bless you as well
@jeffanderson497910 ай бұрын
Chrysler built that huge Sherman Tank facility in six months in 1940. It can be done! We choose to pander and doodle before the hammers start singing. I’ve been watching your videos since 2013. At that time there were very few KZbin channels with metal machining content. You taught me so much over the years. You have made me a very accomplished hobby machinist. I thank you sir! Ten times over 😘
@mrpete22210 ай бұрын
👍👍👍
@bryceonysko647910 ай бұрын
thank you mr. pete 😀😀😀😀😀😀😀
@danielrapoza84689 ай бұрын
Hi Mr Pete... Congratulations on reaching 300K viewers !!! Please keep your shop videos coming, they are very valuable to us who tinker in our basements. Thanks for all the videos you do. Dan😊
@mrpete2229 ай бұрын
😄😄
@doingstufforatleasttrying484310 ай бұрын
Mr Pete ….. why do you worry about views? Views don’t mean anything. You can put up a video of a cat smacking a bird and get a million views. I honestly think the title says it all. But like you said if you have subscribers that are no longer with us then it would explain the view count. I can tell you that I never miss any of your videos. I always seem to learn something new every time. I unfortunately became disabled in 2016 and needed something to fill my time. Here 8 years later I have a heavy 10 south bend ( with the large bore ) and a wells index 747. I think I have watched every video you put out. I have learned so much from your videos that I can’t thank you enough. ITS NOT THE VIEWS YOU GET BUT,THE KNOWLEDGE YOU GIVE. You have given so much knowledge to so many people. Keep up the great work…….
@mrpete22210 ай бұрын
Thank you very very much👍👍👍
@doingstufforatleasttrying484310 ай бұрын
@@mrpete222 Anytime I am trying to figure something out I go into your video library and look for what you would do or did. I really took an interest in steam engines. As I am in the process of building a D10 Stuart. I have measured once,twice, and sometimes 3 times before I take a cut. I have made several mistakes so far but, we learn from our mistakes. As far as tightening the Chuck in all 3 locations…. I have heard that if you tighten the first one to just hold the part and tighten the second one a little harder and the 3rd the hardest is kinda like tightening head bolts. So it holds it evenly. I do it but have no idea why..lol… Thanks again Mr PETE…
@AmateurRedneckWorkshop10 ай бұрын
You always have content that I find interesting. When my channel was active, I only had 11k or so subscribers but at the most only 600 ever watched a video. I think they just subscribe because you asked them too and then they don't come back. Thanks for the video keep on keeping on.
@mrpete22210 ай бұрын
I think you’re right. In fact, I am subscribed to some channels that I have totally forgot about.
@briantaylor926610 ай бұрын
On the scroll chuck question, it might be worthwhile to do a video with the back off a scroll chuck to show the scroll and the pinions, demonstrating how the chuck actually works. Then you could mount the (reassembled) chuck on the lathe and check runout on a dowel pin with one, two and three pinions tightened.
@lawrencelamb960110 ай бұрын
Mr. Pete, love your videos, ALL of them. Please don't stop your shop videos. We really enjoy your stories and road trips too.
@carrollprice121310 ай бұрын
Bridges were also covered and partially enclosed to prevent horses from balking when seeing water on both sides, leading to backing wagons and buggies off a bridge into the river. This may have been the primary reason with preservation of the structure an added bonus.
@mrpete22210 ай бұрын
Good point, I never thought about the horses. Hopefully they had blinders on.
@robertburns241510 ай бұрын
Try this experiment get around piece of material preferably something ground and straight put it in the chuck in the lathe put an indicator on the piece and spin it adjusted to the high spot on the indicator and tighten the lug closest to the high spot watch the indicator then you spin the check again and find the high spot tighten that lug half the movement of the indicator. Rinse and repeat. You'll be amazed.
@mrpete22210 ай бұрын
I think I will try that
@rossstenner440210 ай бұрын
Thanks for the bridge update [ I know that the bridge is an ocean & 4000 miles away but it fascinates me], keep updating us of the progress please. I find all your content of interest keep up the good work.
@mrpete22210 ай бұрын
Thanks, will do!
@m9ovich78510 ай бұрын
I watch every Video lyle. You are such a treasure of History with Your memory, Rants & stories. Like another commenter said, You have a loyal following of hard core Viewers... It might be "Muscle Memory" from tightening 4 Jaw chucks LOL... Someone told Me Horses got spooked going over bridges and a covered bridge gave the Horse the sense of going into a Barn. Mike M.
@mrpete22210 ай бұрын
👍👍
@componenx10 ай бұрын
I had a dog (Aussie mix) that was scared of wooden bridges, docks, piers, and even paint strips on concrete. My deck didn't bother him for some reason. There were a few times while hiking that I had to carry him across bridges- people always thought it was funny.
@renaissanceman714510 ай бұрын
We love you Mr. Pete! Thanks for ALL of your videos, even the ones in which you rant "too much".
@johncloar169210 ай бұрын
Thanks Mr. Pete for another wonderful video it's always a pleasurer!
@andyfields324810 ай бұрын
LOL I watch every video since I discovered you about 2010 so don't blame me. But think on this, you my friend are now immortal! All those young folks that aren't watching you today will be watching you tomorrow as older folks. You don't get the views all at once today? So what! These videos have staying power, they will outlive your grand children. Do you think anyone will care about 99% of today's KZbin videos in just a couple years? Not a chance, they are just pop culture fluff! But your library is a treasure of practical information that will be primary source information for generations to come. Like the Foxfire books there will ALWAYS be people learning from your videos. You should be very proud of this profound gift you have given the world! I and the rest of humanity thank you profusely good sir!
@mrpete22210 ай бұрын
Thank you very very much. You encouraged me greatly.
@charlesvanvalkenburg759210 ай бұрын
I managed to get notifications of your posts by having rung the little bell. I appreciate you showing the picture of you and Henry. He looks like the sort of boy that any grandpa could be proud of.
@mrpete22210 ай бұрын
Thanks so much
@hbracerx10 ай бұрын
Congrats on the 300K subscribers!! The 1-2 K of us that watch your videos regularly, all leave with knowledge we didn't have before. We can all pass on that knowledge. Despite the KZbin algorithms your knowledge and messages are filtering out to thousands. I have pointed some folks to your channel and they all enjoy it. BTW, you just called me old..LOL. I guess I"m starting to resemble that remark!
@mrpete22210 ай бұрын
👍👍
@ecay9 ай бұрын
You were talking about views and things like that. I don't know how to help you on that but I do appreciate you make the videos you do make. I like watching your videos over the stare it or what other micrometers or tools or things like that? Your audience may be small, but I'm betting they all appreciate the videos you put out
@garychaiken80810 ай бұрын
Great job Mr.Pete. Seeing the old wood workers bench made me laugh. I have one just like that. It belonged to my grandfather and now it’s mine. Thank you 🙏 😊
@Jim-c8j10 ай бұрын
Mr Peterson,your workshop tips on milling, turning and explaining what might seems rudimentary and mundane to the boffin's on the internet! To people like me who have a small lathe and milling machine starting out in a venture to keep me occupied. I have always fabricated all my own steel work,motor mechanic all repairs,done my own carpentry and plumbing but have always been frustrated because I had to take little turning jobs to someone else.Thank you Sir for all your videos, may God continue to bless you with strength and health to continue your invaluable videos.
@mrpete22210 ай бұрын
👍👍👍
@jamesreed612110 ай бұрын
It would be interesting to see an experiment on a three jaw chuck where you chuck a piece of drill rod and dial indicate using either method and compare the results. Also, if there are more than one three jaw available (say 5 or six) record and tally the results. Please don't ever stop doing shop videos. You may have 300K subscribers but there is a small group of us that hard core subscribers. We never miss a Mr Pete Video. In my opinion, the USA is becoming a place where there are too few people who can do things with their hands. It is sad to see. Your channel has shown some of us that we can indeed accomplish things with our hands. For that you deserve many thanks. I am 78 years young and I wish that in my school years that I had a shop teacher like you. I do enjoy some of your non machining videos but I would hate to see them displace the machining videos completely. I have said this before, repetition is the way some of your more hard headed subscribers learn. I hate to admit, it but I'm in that category. You have given your viewers and subscribers much more than you know. KOKO!
@mrpete22210 ай бұрын
Thank you so much for a lovely comment. It meant a lot to me. I had thought about making a video with three jaw chocks. I was fantasizing, that I would use a torque wrench to tighten each gear. And then I would use a torque wrench on the workpiece held in the Chuck jawsto determine how tight the work actually was.
@stephenlesbos620810 ай бұрын
Thank you Mr Pete
@ChrisArnold-h7q10 ай бұрын
Ran a big Monarch with 38" chuck and many hours of use with 3 shifts use. If a heavy part was only tightened with one position it would run out bad the scroll plate was loose in chuck if you used all the key position it was much closer
@Ross_Dugan9 ай бұрын
Mr Pete. I’ve been a heavy equipment mechanic for 25 years. I have drilled a lot of holes with a hand held air drill in poor conditions. I have always ran Jacob drill chucks on all my drills, I do believe in heavy drilling, especially hand holding a drill, tightening the chuck in more than just one hole seems to get the chuck just a touch tighter. I don’t find it necessary when using my mag drill or when using one of milling machines while drilling. Take care really enjoy every video.
@mrpete2229 ай бұрын
👍👍
@johnr187810 ай бұрын
You are the best, hands down. I watch everything you and Scoutcrafter put out there. Thanks for your enormous contribution. PLEASE continue! I remember Henry in the toolbox.
@mrpete22210 ай бұрын
👍👍
@davehiggins590310 ай бұрын
I re rang the bell. Never boring videos.
@mrpete22210 ай бұрын
😄
@EVILDR23510 ай бұрын
I had three of those Standard drill indexs. All the same design, but all made from different materials. The oldest was cast iron, The second oldest was cast aluminum or zinc and the third was made of plastic. My lust for money had me sell them on eBay about 15 years ago. I have always enjoyed your videos. I have learned a lot watching them. Thank you.
@mrpete22210 ай бұрын
👍👍👍
@jayminor975710 ай бұрын
Hello Mr. Pete First of all, all of your content is great and there are those of us who are always happy when you post new offerings. Regarding chuck tightening, I have found that incrementally and sequentially tightening each spot on a 3 jaw lathe chuck or a drill chuck can result in less runout and better repeatability on the runout. Originally, more than 50 years ago, I was informed by my high school machine shop teacher that this was best practice. It seems to work for me so I do it. None of my chucks are of very high quality and perhaps if they were it wouldn’t make as much difference. As always, looking forward to more Tubal Caine.
@mrpete22210 ай бұрын
👍👍
@moms76210 ай бұрын
I originally started watching for machine work. I enjoy your humor and more recently life stories. You might consider visiting some of your viewers shops. My passion is machining but my current place is in shambles, I haven't had time to clean and straighten up because I'm working towards getting a new shop. I'd love to have you visit after my new place is built.
@mrpete22210 ай бұрын
👍👍
@andyfields324810 ай бұрын
I was taught to tighten a drill chunk at all 3 locations. The reason is the ring binds against its constraints. By moveing to the next spot you can get a tiny bit more rotation because you're then pushing it away from the airea where it is bound and pulling it farther around. Think of it like pushing vs pulling, pulling something through always takes less force than pushing it. By moveing around the ring you are now pulling on the airea that you were previously pushing so walks the ring around a tad farther. It does work, you do get more rotation with this method. Same applies to a scrolling lathe chuck but I think it slightly more relevant to keyed drill chucks.
@johnkemas734410 ай бұрын
I had also heard that covered bridges served another purpose to protect horses from spooking due to high bridges, wind, and to keep the floor/deck of the bridge from freezing over and making it tough footing on the horses. That and they still look cool!
@jimad10 ай бұрын
Agree with the person who mentioned older chucks still moving a bit on the 3rd. I once heard some urban legend about getting better centering by being quite gentle on the first two tightenings and firmer on the last, and I believe that's helped me in the past.
@thomasbrown940210 ай бұрын
I enjoy watching the shop stuff (and the old yard sale vids); never thought of subbing, but now I am :) I work at a trade school by the way, in construction. The amount of people who have no idea what old hand tools are and what they're used for is staggering - most of the teachers are of the "that's old junk, throw it away" ilk. I put it in a box and use it myself; they are joys to use. Meanwhile we go through six or seven cordless toys every semester. Oh well.
@mrpete22210 ай бұрын
Thanks for the sub!
@danbreyfogle848610 ай бұрын
My notifications work well and I always go to your channel first. I love your content so you are first on my list. I must admit that the other reason you are first is that I may just doze off later and I don't want to miss anything, grin,,,,
@mrpete22210 ай бұрын
Wow, thank you!
@dennisemme245610 ай бұрын
Great Work. Receive notification of each of your New Videos. Watch each one several times. Just like the complete collection of your Videos on Flash Drives. Enjoy each and Every Episode. Please keep up the Great Work.
@mrpete22210 ай бұрын
Thank you very much
@rcurry853110 ай бұрын
Thank you, Mr. Pete .The kids grow up so fast. I remember when Henry fit in your toolbox. Lol . I met Henry at your, meet and great. I'm the guy that brought the bottle of honey. etc.
@mrpete22210 ай бұрын
Yes, now I remember you the honey was great
@JaredAF10 ай бұрын
Congrats on 300K subscribers Mr.Pete!
@mrpete22210 ай бұрын
Thanks a million!
@bcwrangler10 ай бұрын
Robin Renzetti was a guest on Episode 10 from The Home Shop Machinist podcast, he said (time he discusses chucks is at 1:40.10) to only use one chuck key hole so you can repeatedly place the load on the scroll the same, as changing wrench holes moves the the forces from a different vector.
@mrpete22210 ай бұрын
Interesting
@chrisbrady-t1u10 ай бұрын
My shop teacher collected antique machinist tools.He got a Starrett self calibrating 1" mic. It was about the funkiest wunkiest contraption you ever did saw.It had a leather holster.I bet Pete got a few of those!All the Norwegian seamen used to live in a certain section of Brooklyn when I was a kid.No more!Now all hispanics and asian peoples
@mrpete22210 ай бұрын
😁
@ggreenlee1910 ай бұрын
My thought on the Chuck Key is if the T-handle moves as you tighten the two other points then it does some good removing “play in scroll” at each jaw. How to quantify no idea.
@cyoung429010 ай бұрын
Love your “THIS AND THAT” series… in fact ALL your rambling
@EVILDR23510 ай бұрын
A good friend of mine for the last 67 years is Norwegian. I use to go with his family each summer to The Sons of Norway picnic in Northern California.
@feathers35210 ай бұрын
I just became #999. I have missed a few videos but always enjoy catching up.
@mrpete22210 ай бұрын
👍👍
@floridaflywheelersantiquee757810 ай бұрын
Thanks for sharing Mr Pete keep doing shop videos enjoy them
@keithviolette587010 ай бұрын
Hi Mr. Pete, I have a basement shop as well, and I enjoy your videos. My collection isn't quite as large as yours, but it's probably close. I have the same 0-1/2" micrometer, a Unimat, a Sherline, an old South Bend, a Bridgeport V2XT that I converted to Mach 3 and built a 4th axis. My day job is as a lead Mechanical Engineer designing medical devices and mentoring younger engineers, my side job is an educational toy company, and I enjoy showing my kids how to make almost anything they want. Keep up the great work! I always learn something new when watching your videos.
@mrpete22210 ай бұрын
Thanks 👍👍👍
@tonyc.452810 ай бұрын
Lyle, just so you have it on the radar, I subscribe to many machining channels, including yours, and find that when I'm not seeing one, and go looking for it, the "subscribe" is still an outlined bell, but it not blacked in as I had it. KZbin is apparently changing it. Just as a Jacobs chuck, tightening all three does, indeed, tighten down on the tool or workpiece more securely. I learned that from my father, who absolutely forbade ruining one of his drill bits by "shanking" it.
@causewaykayak10 ай бұрын
Sorry, cant help with the chuck key question. Seems unnecessary 'tho. Grieving for both your bridge and the Mill that got scrapped. Thanks for all the stories. 🇮🇪
@mrpete22210 ай бұрын
😁
@edl507410 ай бұрын
Thanks for the mention hope you enjoyed the package .that is pvc board just use pvc glue sticks quite quick .nice to see another interesting video. Thanks mr pete !!
@mrpete22210 ай бұрын
Thanks again!
@edl507410 ай бұрын
@@mrpete222 that was sad to hear about the starrett co. That's what the us 🇺🇸 is becoming everything is for sale !! And is going fast if we don't get are leadership changed we should not be selling out to other country's! I could rant for days on this subject !!
@ypaulbrown10 ай бұрын
16:22 that Clausing lathe could use a good 5c collet closer.....haha......best wishes, Paul
@fredspeerstra84610 ай бұрын
when I was in my first assignment after finishing my millwright apprenticeship, one of the best of the craftsmen I was working with (he had also been a machinist) told me to tighten a portable drill Jacobs chuck in each of the three holes because the smaller size drill bits would slip. I've been doing it that way for over 45 years and it seems to work. Of course most of my newer drills don't have Jacobs chucks.
@mrpete22210 ай бұрын
👍👍
@CraftedChannel10 ай бұрын
On the chuck tightening, I theorize they think they are centering up the scroll plate within it's bore clearance which would of course be part of the noise in the centering of the jaws.
@jackreed344510 ай бұрын
I have those 2 drill indexes along with many other styles. I spent far too much to collect them. I will get a display case one of these days...I always tighten all three places on my drill chuck. I was taught that way from a machinist 55 year ago. I may have had something to do with the very old check on the lathe but once learned I continued to do it until all my battery powered drills are keyless. jack
@haroldsprenkle417310 ай бұрын
Ok Pete, just depends on chuck, might get a bit tighter but. I was told long time ago pick a spot to use. Use that spot to tighten and grind in jaws, use it and if scroll diameter had any looseness you would have less runout. Story time, old timer I worked with, ok he was only 56 at time, but that was 44 years ago said he was working in shop and Forman came over to him and asked if he had ran a big lathe before, he answered that he had. He got put on big machine because the guy who was running it scared Forman, he was afraid that other guy wasn't tightening chuck good and parts were going to fly. So he put Melvin on that machine. Melvin knew how to tighten a big chuck, watched him tighten a 15" 3 jaw many a time on the old Gisholt.
@mrpete22210 ай бұрын
👍👍
@P61guy6110 ай бұрын
It should be 3.3 million Subs. I was an early subscriber of yours. Do you remember the video I sent you of my daughter running a mill and Ititleed it “my auto feed”.
@mrpete22210 ай бұрын
Yes, I do, that was pretty clever
@HarderThanCalculus10 ай бұрын
Thanks for the great video! As to chuck tightening, I do a similar method to the one in your vid. I don't bear down on the first lug though, I tighten a little bit, then move to the second lug and tighten a little more then on to the third lug where I give it the full Monty! Why? I have found this method really helps to get the force more evenly distributed around the workpiece, helping with concentricity.
@mrpete22210 ай бұрын
Great tip!
@Blippa-v4x10 ай бұрын
My thought about the chuck key sequence is this: My modeling uses micro-sized drills. In order to get the drill to spin true, I have to carefully rotate it in the chuck and then evenly snug all three jaws. If a test turn is not true, I repeat until it is true. My other thought is that it may not matter much for the sizes of tools usually seen in these videos, but in my case (0.15mm) the fitting of the chuck or collets is critical. I sent you my brass / plastic mallet photo moments ago. It would would be great if seen in an upcoming video so I could brag to my friends and become famous.
@warrenjones74410 ай бұрын
I have a small 1/2" Starrett mic and the anvil is rounded. I suspect for measuring the wall thickness of tubing. I was told when I was a kid to tighten a drill chuck with all three holes, I never do! However with a lathe chuck Robin Renzetti mentioned and I think it is a solid idea, to use one or the same pinion to tighten the chuck as the tightening force on the scroll is always the same place in the chain of events each time. As a matter of fact my 8" Buck brand adjust tru only has one pinion to tighten it. That's my understanding Mr Pete.
@mrpete22210 ай бұрын
Thanks
@TheGuitar196210 ай бұрын
Your videos only show up on my feed on Saturday. The rest I have to search out.
@duron700r10 ай бұрын
There have been times I didn't get any notifications of your new content. I just clicked the bell, we can choose All, I'd guess that would be all the channels we subscribe to. I chose Personalize. I think that means your channel only. Wink wink, you could warn us beforehand to take notes. : - ) This video is chock full of updates and info. Oh, then people like me would type for an hour... Rant on as you feel. It's mostly very good ranting!
@dannyl259810 ай бұрын
Thanks Mr Pete.
@scottkramer743110 ай бұрын
I've always tightened lathe chucks and drill chucks at all three holes. You get a tighter grip that way. You can prove this two ways. One, if you apply the same torque on all three holes you will find that further tightening occurs on holes two and three. Two, you can also prove this with a drill in a drill chuck. It will take trial and error but you can show that a certain amount of torque on one hole will cause the drill to spin but the same amount of torque on all three holes will hold securely. I thought this was common machinist knowledge. An old machinist taught this to me, and I have observed the difference.
@BobLewen10 ай бұрын
Lyle, , it should be sufficient to tighten the chuck using just one of the holes, because the jaws are interconnected via a scroll gear, and move an equal amount at the same time. So, and I think you agree, that when you tighten one socket, you’re effectively applying pressure evenly across all three jaws, so there’s no need to put the chuck key in the other two holes.
@haroldadelman113010 ай бұрын
I was told that a Jacobs chuck needed to be snugged tight in all 3 holes to prevent slipping. Have I always done it? No. Have I had drills slip? Yes. But that is not conclusive. In my opinion the lathe chucks would not be benefitted by repeat tightening. Again, sorry I have no proof, and I doubt that there is any proof out there. It’s just another foible. We out here who watch each video as it comes out appreciate every bit of your productions! Thank you, Mr. Pete!
@steveparker872310 ай бұрын
Ive enjoyed all your videos MrPete. Congrats on 300,000 subscribers. Have a great day.
@ssboot566310 ай бұрын
Just my thoughts....... we tighten 3 locations on a drill chuck to make us feel better when the danged thing slips on the bit anyways.(becasue we know they will anyways.)
@mrpete22210 ай бұрын
True
@wallbawden551110 ай бұрын
The tightening of chuck wether lathe or drill or any chuck with multiple points it and was taught to me as it evens out the pressure on the worm gears or cage take it or leave it but there you have it simple really Cheers
@mrpete22210 ай бұрын
Thanks
@dogpaw77510 ай бұрын
Re: lathe chuck key / jaws. Have done it since school metalwork class, thanks Mr 'Tosha' Clarke for a life skill, can't remember a reason being given, monkey see monkey do, thought it was to spread wear on head key ways ?
@mrpete22210 ай бұрын
👍👍
@jamesgreen383110 ай бұрын
Always enjoy your videos
@keithschwartz731810 ай бұрын
Good morning Lyle, one of the 300,000 here. I was taught to use all three holes on the chuck. I do not believe it makes any difference. If a small chunk only has one instead of three holes, then one is sufficient. It might be that a larger chuck is heavier, the machine is larger and probably more difficult to turn by hand, then it makes sense to have three holes. I always taught my students to use all three. That way, at least one might actually get tightened.
@henkbarnard155310 ай бұрын
15:23 IDK I always use a 4 jaw chuck.
@robgraff10 ай бұрын
My shop teacher taught me to always tighten a drill chuck in all three holes & in my experience, I almost always get it tighter on the second hole, not so much on the third.
@jasonhull571210 ай бұрын
I tighten my Jacob’s chuck that way. But it’s just habit, my grandfather taught me to do it that way and it was to wear the teeth even and to prevent damage to the chuck by clamping down on a drill bit crooked or uneven. 🤷♂️ that’s what he told me and I’ve done it that way ever since. So about 30 yrs.
@brentandrade586110 ай бұрын
I've used the tighten every hole , only to actually trim the runout of certain pieces. Oddly it actually works. As for the Jacob's chuck, I tried it and never found it to help w runout, but a well worn old chuck, using more than one hole to tighten can actually increase the tightness. Not by a great amount, but.... I was using a ft lbs torque wrench to check , boredom is brutal!! An old extension that had snapped was ideal . Oddly the using evert hole seemed to help on copper, brass, and bronze stock. Hex, Sq etc.
@randallbayles132610 ай бұрын
from what i haw heard some of the good u tubers say is that it helps on getting the 3 jaw to center better
@ryanderson3410 ай бұрын
Hello Mr. Pete. Norwegian checking in from Helmar, IL.
@mrpete22210 ай бұрын
Did you ever visit Norway Illinois? They got a nice little museum
@ryanderson3410 ай бұрын
@mrpete222 Sadly, I have not. One of those things too close to home and always seem too busy to go. My Mother and Uncle went last summer. I'll see if she wants to go again this summer.
@dannywilsher416510 ай бұрын
I watched a video a while back where a man put a dial indicator on a rod in a three jaw chuck and tightened it once and checked the run out. It was near perfect. He then tightened the other two spots and it distorted the alignment several thousandths. I don't know if it was just his chuck or if all of them will repeat his process.
@Duckfarmer2710 ай бұрын
Lyle - Enjoy that time with Henry, they grow up too fast and my youngest (granddaughter) will be 14 in a few weeks. Keep up the videos - they are all interesting and I'm always learning something. My engineering analysis on the 3 jaw chuck - as mentioned by at least one other poster. Probably no advantage on a 'perfect' scroll and gear. However, if even slightly worn there would be just a bit of clearance that would allow it to tighten a bit more on the second or third point. Might well not be noticeable on your 'calibrated armstrong' automated tightening mechanism. One of my profs from almost 60 years ago could have had us running in circles with that analysis! Have a great weekend.
@fixitmakeit10 ай бұрын
always appreciated the content, hope this small comment helps the algorithm .
@mrpete22210 ай бұрын
I hope so too!
@jsteifel10 ай бұрын
don't be alarmed by low numbers. I started noticing a bunch of machinists whose numbers are way down. There are a few that are on the way up though. Just keep doing what your doing...