How To Replace Your Windows | Ask This Old House

[@boatdetective]

I actually met Tom on a job and spent a bit of time chatting. This guy is 100% legit.

[@Skammerd]

Her screaming off camera was priceless. But kudos to her for actually participating. Here's a young homeowner that's actually trying.

[@ZacharySalman]

You could hear someone behind the camera laughing

[@dartme18]

Yeah, glad they didn't edit that out! xD

[@talon501]

lol your right. Those jam liners are easy to bend, put the window in the middle & bend them down then up & no worries. Unless your planing on reusing them, witch wouldn't be hard to do, in a garage or something.

[@shanec4441]

I did it 😄

[@williamstone2902]

talon501 i

[@MikeHurtubise]

I'm in the millwork design business, This is the first person in 32 years I've come across that knew the difference between window "stool" & "sill" Nice job!!!

[@DonkeyLipsDA3rd]

What's the difference?

[@nicolaspaglia3760]

Tom is an absolute unit

[@MikeHurtubise]

@@DonkeyLipsDA3rd 0:54

[@DonkeyLipsDA3rd]

@@MikeHurtubise thanks my guy....you my guy right here nah mean luck my jelly beans

[@electricianron_New_Jersey]

D M The stool is a part of the finish trim. The sill is a part of the structure that supports the bottom of the window.

[@TrussttN01]

I usually measure 4 times for any job. Once before I do it, three times afterwards to figure out wtf I did wrong and if it’s still salvageable.

[@Varifyable]

This gave me a good laugh.

[@billsmith9249]

I laughed out loud for realz

[@colingulbrandsen6359]

Dad? Is that you?

[@Bjt5081]

Isn’t this what most of us do?

[@ThomasandKellyHanson-yu9zh]

Looks like we went to the same home improvement school. Measuring only 4 times, you must have taken the advanced course. I'm still at 6 -8 times interspersed with expletives.

[@dustoff499]

I'm telling you... There is no blasted way my windows would be that easy to remove or install. I'd need to hire a carpenter, drywall specialist, painter and divorce lawyer to complete the window replacement. Not to mention the ER visit.

[@adrielhernandez4073]

Lol

[@tryan7]

A good contractor would charge you $40,000.00 That is what a friend paid in my area. Name brand windows. I replaced my own a few years back. $6,000.00

[@kennethebel7726]

@@tryan7 that's more than half what I bought my house for

[@opulence_prime]

A divorce lawyer 😂😂

[@ericlord1796]

Nothing in my house is standard or square etc. I agree - this looked like a model home with prefitted everything. Divorce lawyer would be essential! 😆

[@westsideken]

FYI, windows have one of the highest markups in installation and material costs in the entire home improvement industry, and it's one of the easiest DIY projects.

[@stephnwolf7319]

Thanks for that comment. That, along with this video, gives me confidence to do this myself!

[@dblood8529]

Where do you recommend buying windows?

[@Idiotsincarshere]

@@dblood8529 Big box store is fine for windows. Convenient and reasonable pricing.

[@slouchfromlocals]

And the installation "professionals" make themselves right at home and use your bathroom.

[@michaelsherron7815]

Uh, yes, I testify that your comment is true. My mother-in-law paid close to $10,000 dollars for 6 replacement windows.

[@davidkwiatkowski5830]

I would love to have Tom's help for one week! Just can't get any better than to watch a Pro do things the right way.... Thank you Tom!

[@gaglug2897]

The exact measurements on the original windows shows you how well built that house was.

[@JasonTyler1985]

I was waiting to see if it was gonna be off but was amazed cause that almost never happens

[@whyisblue923taken]

For sure. When built that well, you can just watch one of these videos and actually replace the windows yourself without any problems.

[@ChipChurp]

Yeah not on new construction once Jose and fresh off the boat Manuel who knows everything get ahold of houses to frame. I tell people new homes avoid em . Framing and building used to have respect now it's all newcomers and drug alcoholic divorced dads

[@wkbeats]

Long live Tom Silva

[@damiangrouse4564]

A squarely installed window? That installer was a god!

[@AMindInOverdrive]

As rare as hen's teeth

[@Igorkocev]

Tom is the best.. Watching and listening this guy makes me feel I can do ANYTHING... Thank you Tom!!!

[@johnathansawyer8736]

I've been debating replacing my windows from the inside or the outside and finding Tom Silva doing it from the inside made my mind up. I think my house is about the same age as Emily's maybe even a little newer. I had a company give me a quote of $800-$1000 per window to purchase and install. Then I found the window for $275 a piece. I'm doing this one!

[@GoldenAura32]

How did it go bud?

[@johnathansawyer8736]

@@GoldenAura32 Haven't done it yet. Hopefully ordering windows this week.

[@Axi0s_1]

@@johnathansawyer8736 how'd it go now?

[@johnathansawyer8736]

@@GoldenAura32 ​ I changed my mind. LOL I'm an electrician and am hiring someone to do it that we may do some trading. He will be changing them from the outside by removing the metal around the window and replacing it. I also need some rotted wood replaced as well, so it didn't make sense to do it from the inside.

[@treeguyable]

Replaced all my windows, including a huge bay window, new front door, storm door, and complete double patio door and frame. They all look, and function great 20 yrs later. I guess, when you don't know what you are doing, you go slow, take your time, make sure it is right the first time. Great vid.

[@szargos]

Where did you buy the windows?

[@treeguyable]

@@szargos Lowes.

[@TiffanyLy-wm1oz]

ooohh thanks for the inspo!

[@PrankHouseClark]

hey bro you wanna help me with mine

[@STBRetired1]

I wish this was done on an older window in an older home so I could see how much more work there would need to be done to create a suitable frame for the replacement window.

[@nholt]

Exactly. I wish somebody would take every bad scenario possible and show us how to handle them.

[@mrphilbert1]

A box is a box (or frame).

[@krazzygranny7032]

with ANY replacement window you measure in multiple locations and use a level in case the house settled or other issues and always go with the smallest measurement and minus a little bit more for oopses shimming is easier then trying to shave either the window or the opening to gain some extra space, I've been installing replacement windows for over 20yrs and there's very little in the way of openings i haven't come across, installing the window is the easy part, measuring correctly and thinking ahead is the number 1 job, next not all windows are easy to remove as wood windows so most of your time is in this area of the job

[@mistahozzy]

It’s the same thing

[@DK-ox3ox]

@@krazzygranny7032 My house was built in 1947, not really considered that old, but it was built with very low ceilings. It's a small cape style with 6'7" ceilings. The problem with such a low ceiling, especially this particular house, is that who ever installed the windows and the two exterior doors didn't have room to install the top molding, interior & exterior, to the width of the side moldings. The exterior windows on the front and back have a top molding that is less than a 1/4 of the width of the side moldings. The top of the windows go right up to the roof line. I can almost clean out the gutters on the front of the house without using a ladder. Of course the interior top molding is the same. It just doesn't look good. I bought the house from a contractor who bought it as a flip and didn't go out of his way to make thw windows or doors more appealing. He replaced the old original windows but he didn't use new windows so they were all the same, he used windows that were replaced from other jobs or he found something at ReStore. 8 windows on the 1st floor and 2 on the 2nd ( 1 on each side of the house, someday I'd like to have a couple of dormer windows on the front of the house) and none of the windows are the same. Instead of spending the extra money replace the windows the right way so they would not only look good but be efficient he replaced them with what ever he could find, the cheaper the better. What I want to do is replace them with a window that is smaller in height so the same width molding can be used on the sides and top with a inch or two space between the top of the molding and ceiling. On the exterior I would actually like to just see the same size molding. I'm sure some work would be required to accommodate a smaller window, adding to the top of the open frame like a 2x4 would allow for a smaller window ( in height) . Before I can do this are there building code issues I need to look into first? The windows now look like crap because they look to be too big for the house. Before looking at new windows should I contact my town hall and check with current building codes or can I just install windows that aren't as tall as the ones on the house now?

[@DavidS-pw5gd]

Just had 37 impact windows replaced! Not even close to what they did! From the outside used a multi tool to cut the jam to remove the windows & spring assembly. No trim on the inside or outside was removed or touched. I guess every situation is different. He is the most knowledgeable. He is the Guru!

[@BWIL2515]

I've watched this video a few times and i still laugh when she's carried the window away and the spring pops out. I don't know how Tommy didn't laugh

[@coolguy6624]

Why is everybody making a big deal of her saying "okay" alot of times? .. Tom is talking to her and she want to be polite and responding to him... I mean Tom is not only teaching the people who is watching this.

[@sodoberman]

George C ok

[@sodoberman]

Ok

[@Hypnodog_]

k

[@fd3871]

okay

[@shadowblack1987]

Ok

[@Jump2218]

His projects always go so well! The window fits perfectly with minimal measuring, he never has to modify something to make it fit or send a window back and order another one.

[@xmachine7003]

Measures twice before ordering or cutting😇

[@carlbs11]

If you look at some of the episodes, it's obvious things were fitted together and then taken back apart before the cameras start rolling.

[@michaelsherron5750]

I know...that's why i'm not impressed with his videos

[@Terra812]

That is what you get when you pay for experience.

[@zztop8592]

He's a real expert in woodworking, knows a lot of tricks.

[@gabriellemarseille6981]

Thank you so much for all the instructions on how to replace, fixed or remodeling a old house as a home owner I couldn’t been more thrill of those videos please keep them coming thanks again

[@MSI2k]

5:37 LOL poor girl. Tommy doesn't even look up. he expected it haha

[@limrc1]

Aaaaa, it did it!

[@AckBoater]

He looked over to her when the springs flew out of the balances.

[@pipedope329]

he is very arrogant as most are on TOH

[@augustreil]

@@pipedope329, Come on, he is not.

[@whyisblue923taken]

He's like, "as long as you don't do it around me. I gave you enough of a warning."

[@tonio909]

Great job Emily! It was great to see a fellow young home owner willing to give it a shot.

[@hisnewlife3543]

She didn't do much but stand around and twiddle a little and say okay. Id give a great job if she did the whole second one herself. Let’s face it. You guys find her attractive is all.

[@dmccar12]

This did not help me reinstall Windows on my laptop at all.

[@socialkruption]

Should've installed Linux bro!

[@sodoberman]

David Uninstall and try the Vinyl-clad Windows- Composite edition 😂

[@Chicagoman36]

lmao..

[@bjornjoseph]

Did you run a bead of caulking around the monitor?

[@LFL-qp1fg]

Hardy, HAR, HAR, HAR.

[@Samuel-km5yf]

They always make it look so easy. If I tried to do this, it would take me an entire day to get a single window installed... and that’s if I’m lucky enough to have it actually fit in the opening properly. In any case, I would most certainly pay five times as much when I have to hire a professional to come out and fix the leaking, crooked window that I just botched.

[@jumbojoe55]

Nick P I’ll probably do the same too.

[@livingunderarockunderarock9963]

Just remember that sometimes contractors can screw stuff up just as bad as a home owner. I had a trim carpenter leave 1/4” gaps all over my house. I told him “I could’ve screwed this up just as good for free!” What you want to do is make sure you call a GOOD contractor

[@orlandob9958]

I got a quote for 3 Windows and it was $3200 ( labor included) I went to Lowe's and got the 3 Windows for $480 plus all other stuff needed which totaled $535 The first 1 was the hardest then the other 2 were a piece of cake. I took a little under 4 hours to do them.

[@NosyHausfrau]

Wow. As someone who owns an old home, I REALLY appreciate this.

[@briankearney6386]

Nice job I am just a little surprised you didn't use low expansion foam in the gaps before caulking the inside

[@scottcurrence6526]

Always nice to have good "weatherstrippin"! I love this old house and Tommy.

[@longlee1839]

perfect instructor I learn alot from you. clear and understand thank

[@codykanz1350]

Question for a pro (or a geometer): @7:40, when Tom checks for square, the measurements are 57 5/8 on the first diagonal, and 57 3/4 on the second diagonal. He has the homeowner move nudge the window over 1/8, but wouldn't that just swap the imbalance to the other diagonal? Why wouldn't he have her nudge it over by 1/16?

[@cmeller55]

Never question Tommy. You are playing checkers to his 3D chess.

[@ryaj2356]

You’d actually have to recheck the other side as likely one side was out, the other is too. It’s how it works with square boxes. Overall, I think this step was done to show DYIers how to check for square and how to adjust to fix it.

[@Trog-nk2xr]

He always made everything look easy. Why did I have to back to Home Depot several times for every job

[@SmittyWarben]

This answered so many questions to be able to see it start to finish. I think it would be helpful to talk about when to use spray foam around the edges, I guess that wouldn't necessarily apply here because the spacing was so small? Thanks!

[@ToryEnlow]

I recently found your channel and found this video to be very helpful, especially for those who wished to replace their windows. Thank you for sharing your knowledge and expertise.

[@Brkprsn]

I have a sears home and don’t want to replace the original 1930s windows, but want to seal and repair them. This video is amazing. Thank you!

[@lees5097]

Those this old house guys are just so knowledgeable , awesome.

[@paulc6747]

I never saw my window installer measure that many times to ensure it is squared. Ten years later, a couple of my windows now had a hard time closing down when it is opened :(. I got a bad installer.

[@tonio909]

Or house could be slightly settling.

[@jameswalker590]

Do you have vinyl windows? Some of the less expensive vinyl windows, as I understand from research, can bow over the years and make them hard to shut.

[@Zincink]

@@jameswalker590 that’s why you lift weights to shut the windows haha

[@santaclaus179]

really Tom is a very good teacher , I like the way he esplains everything so easy

[@pattoroy3979]

This old house projects always on point no troubleshooting hahaha

[@vahidheydarinia7749]

I just started a glass and glazing business and this amazing man is teaching a lot. Thank you for being such good instructor.

[@clay100]

I wish i was around this guy to learn, he makes work look easy

[@LeonardoRodriguez-vq7go]

you sir are a true professional , this video showed me what I was looking for to save me enough money in the installation thank you so much 🙏

[@juliosantos9289]

I'm Tommy Silva. Nails bow down to me in respect!

[@lydialas8756]

@Hello Julio how are you doing

[@wenjunli2006]

I have a question. The bottom of the new window is flat without a slope but the sill has a slope. so there should be some space between the window ans sill. Is this normal?

[@edithabakare4994]

Awesome video. I did this in 4 hours. Thank you!!!!!!!!!!

[@KevinRay_man]

She is the most adorable person I’ve ever seen in tos lol

[@landonlefevre5167]

Ok

[@shanewatts1785]

Yes, hard to believe there’s nothing on that ring finger!

[@l337pwnage]

@Rollo Larson the whole department?

[@gabron21]

Rollo Larson You know, she could also be a firefighter.

[@joey8701]

Okay, okay..... awesome, awesome. Irritating, not adorable . Lol

[@bblack340]

At 5:15 "... Were gonna pull hard out, but don't go out too far." God Tommy is smooth as silk.

[@slouchfromlocals]

Is there an option to specify interior/exterior insert? Seems like most windows get installed from the exterior of the home.

[@AP-ph7hf]

I came here hoping to see trim casing get ripped off and a gigantic hole in the side of the house. I leave disappointed.

[@Irelandgal]

I’m watching, reading, listening, praying a lot for my great grandparents homestead, 27 windows, original with the heavy style pulleys. Want to teach?! Western MA 🙏☘️

[@scallywag1716]

What’s a stahm window?

[@wjthomas23]

🤣

[@nicolaspaglia3760]

Stahm winda for when it rains hawd

[@SuperDCStar]

Nicolas Paglia lmao, wow you are wicked smaht!

[@alekwithak5853]

Maybe Rahjah can explain

[@nholt]

It's a quarter

[@robertmikita5745]

I'm a disabled vet I just brought a house this past Feb it needs windows do you of any grant programs for vets so for home improvement thanks luv the show

[@lydialas8756]

@Hello Robert how are you doing

[@santaclaus179]

also I can see that Tom is a very patient person

[@bobbyzeng3105]

the window measurement you did was for rough openning? thanks.

[@stephmo371]

What about windows with the old rope and counter weights?

[@robertgrist8496]

When its 12° outside, there is cold air between his blind stop caulking and the interior caulking. No insulation which is cheap and doesn't hurt to add. Also he may be square but is it level. You can have an unlevel square.

[@bklynwam]

Great video with a lot of information for DIY people. Would you like to make a video (or direct if already have one) to show how to remove a vinyl and aluminum frame window which was installed when the house was built with nailing flange outside with an exterior vinyl siding and install a new energy efficient window?

[@AntwonGriffin-w3i]

Hey Tom I have a 1950 house and needing to replace windows and frame were are some places that are good to shop at

[@cindyk4145]

I would have liked to see what look like on outside, are they flush with outside trim since he took off the outside combinstion window?

[@clickbait7322]

Tom - dont let it go beavuse those spring balances will shoot away.. a second later off the camera all you hear is her screaming LMAO... Priceless...

[@ranmas2004]

It cant be this easy. I got a window replacement quote and it was insanely priced!!!

[@hisnewlife3543]

Me too! I mean, crazy prices for only half of my windows! They wouldn't let me see a sample of what the window was on the quote at Lowes and I am guess it was junk.

[@claireroa9164]

I have this kitchen window sliding sideways and one side is permanent and I can see in between the glass window all the sides are broken to pieces I’m not sure if those are sealant that are worn out do I need to replace my window or can it be repaired or fixed pls let me know I’m getting my house prepared to put on the market..please advise.

[@michaelacciavatti1061]

I didn't see any insulation used between the widow and the old frame? I use fiberglass insulation or a closed cell foam wrap which I apply to the new window frame. The foam wrap also helps center the window in the opening! Some companies provide foam wrap as an option. Caution when you use fiberglass which is a little more work, you must not force it in as you can push the frame in and the sash will be too tight. Fiberglass insulation should never be forced in anywhere, you loose it's insulation quality when it is compressed. I am a licensed and certified home improvement contractor and have installed windows for almost 50 years.

[@tinytim9453]

@Michael Reed Wth are you talking about. Both sides has 1/4 inch gap, perfect for insulation or spray foam. I've done over 2,000 replacement windows and I insulated every one of em.

[@lydialas8756]

@Hello Michael how are you doing

[@yourmedicareguylarrybelt7792]

I spend under $200 for a good vinyl window that size. Paint the outside to match the trim. No customization. Order stock and fir out an inch or 2. Would I rather have her window? Yes. But to do my whole house in those it would have been an extra $10,000. My windows will be less maintenance as well.

[@markkavit3165]

Larry Belt hope you know that vinyl will not last as long as other types.

[@replyhere590]

Mark Kavit But easy to replace again once you have the right sizes, etc. And name brands help you sell the house if that’s what your goal is (ours, too). Thermostars from Pella are in the $150 range, stick to std sizes, yes for sure not the worlds best, but the name is familiar & golden to most semi literate agents & homebuyers. In 10 years, install new, latest and greatest, you & the new homeowner still saved a bundle over renewal by Andersen etc; Did anyone realize that consumer reports loves Thermostar? A copy of their review page will be in the home when it’s being shown. It turned out that all the custom built wood windows, single pane, in our house, matched up exactly to standard in stock sizes at Lowe’s. Ka ching for us.

[@themalacast]

He goes to the trouble of explaining about the argon at 2:41 and then, betraying she has no idea what he was talking about, happily added “No more drafts!” to which he agreeably assented lol

[@borys444]

I can sum this video up in 1 word and that’s OK.

[@peterl4614]

Other than appearance, why not leave the storms in place? Is there a reason?

[@davidazinger5639]

that guy is really bright !! Makes it simple to understand !

[@christopherdekonstrukt444]

I'm keeping the same size but will have to rebuild my rough opening as the framing is termite damaged.

[@dheezknutz]

Did anyone else get really excited when they saw the bernese mountain dog walking outside the window?

[@greenearthblueskies8556]

That was so staged 😂

[@troyeager8877]

I have rough framed a house, done electrical, some plumbing and hung a few doors and built my own pole barn. Never installed a window. This is what I have to learn. I have ten to do plus siding and gutters.

[@palerider55]

It may be long past time to ask a question, but I seriously need to know what those type replacement windows with the bevel on the bottom are called, who makes them and where it is you ordered them. That is exactly what I need and I can't find them anywhere.

[@itwaslikethatalready]

Did they have to remove the storm windows to install the new ones? Or was she just removing them in general? I want to keep mine because they’re so handy.

[@gregvatistas7114]

I realize this is an old post, just seeing if any answers out there, i have the same windows and want to replace, I see when he measures the left side to the top, he measure the inside sill to the top of window, its 49 3/4, but when he measures on the right to the top his measure from the top of the stoop instead, so wondering which is correct. thx

[@saviorcrash]

what did you put at the bottom of the window for that gap? caulk it or trim molding?

[@Woodiness]

Can you measure everything after it’s removed? Like if I or the person I bought the house from has removed it already

[@busyrand]

This looked like so much fun!

[@stevenm5508]

So is that rough or actual? I'm trying to order windows

[@Katwoman4318]

My Anderson windows are 30 yrs old. Should I replace them Tom? Casement windows are expensive.

[@gmurray3616]

Measuring from stool to top of window, what was your the stopping point for the measurement?

[@timf5963]

I've seen replacement windows installed with flashing and some without, like here. When is flashing required for a replacement window?

[@sikorskybama1]

great video. No proper PPE. Glad the young lady didn't get hurt or cut.

[@drewbush6535]

I wanted to see the window Springs fly when she let loose carrying window outside

[@kyleking1401]

You can hear it spring apart

[@whyisblue923taken]

Same here. Needs a second camera!

[@michaellim4165]

5:38 what you were looking for

[@cup_and_cone]

Tom is the only other person besides her husband to have heard that scream.

[@quaytran3653]

How to fix the pine from laundry & kitchen joint to the main dran

[@todddebockler7786]

Hi Emily you made that look easy thank you for doing this video

[@mannyperez609]

Tommy the legend Silva

[@Zincink]

I’m getting two new windows upstairs in the next two weeks & wanted to make sure I’m getting the same sized window cause they are custom. I am hoping the new ones will keep out smells and noise from outside.

[@lipevolcom2]

Second before the springs goes out, Tom looks like Rob Cosman!

[@becoolnotcruel]

I'm trying to find any videos This Old House may have made with regards to removing an existing large picture window and making it a half the size opening for a much smaller window. Are there any video tutorials on how to do that on this channel?

[@abiel.rodriguez]

5:38 best part!

[@zetaminor77]

What about the storm window on the outside? No fly screen? Just wondering...

[@pisces8160]

This is a great instructional video. Does anyone know what kind of caulk he used ? Can anyone make a recommendation? GE? 3M? DAP?

[@jw404]

We never use caulk.... always used the DAP non-expanding foam

[@loupnook]

Where do you get replacement windows that fit the sloped sill? Lowes said they don't make them.

[@TobiasRaphael1]

qwerty12345 The salesperson should know and care enough to ask you if you need a sill adaptor. It can be purchased with the window order from the manufacturer. The sill adaptor is put on the bottom of the new window and is designed to take up the space of the sloped gap.

[@trevino37]

This Hold House, why did you not use commercial grade foam to fill in the gap and only caulk? I want to replace my windows but one installer does not use foam but fiberglass insulation while others use foam. I am a little hesitant in installing windows without foam. Is my hesitation a correct concern?

[@aaronperry4156]

I see an Andersen logo on the window sticker. What series window is this and what would I ask for if I wanted to order this type of window? Vinyl wrapped composite with paintable or stainable wood on the inside? Thanks!

[@Zincink]

Ha wait till you hear the cost it was astronomical. The quote was laughable.

[@MrDeeBro79]

I love the way he says "order"

[@BeerkegGarage]

Nice video, good job Tom. Now you can come over to my house and help me DIY my 37 windows

[@jesusmartinez8462]

Great video!. how can i measure a windows size when i want to replace an existing with a new construction window? Thanks

[@augustreil]

I draw a simple rectangle on paper and the put all the measurements next to the drawing: 3 horizontal, top, middle, bottom and the same for the vertical: left side, center and right side top to bottom. Use exact measurements(rough opening) and the window company will usually reduce those sizes by a 1/2''- 3/8'' to give you room for adjustment. The window you get will be a replacement window, not a "new construction" which have the nailing flanges. Hope this helps.

[@bensonhurst7272]

@@augustreil Do you lose window space with replacement windows? Thanks.

[@augustreil]

@@bensonhurst7272, Yes, a little, but it's not enough to worry about plus there's really nothing you can do about it.

[@SaltySugar]

Awesome helper, cute and knew how to work, seems like a fun person! Also, very handy video. I think I might gamble with the Home Depot. Thanks!!

[@4uafunguy]

Thanks but when ordering is that your true measurement for the new replacement window or is it the rough opening measurement? I believe the rough opening measurement will be 1/8 " less in with and 1/2 " in height. Thanks for the reply

[@hevitubi]

they didn't take it down to the rough opening, but set it in the old frame already in place. In other words it's an insert replacement window rather than a full-frame window installation.

[@EarleSara]

Do you have to remove the moulding on the inside of the house around the windows?

[@Razzman70]

I install replacement windows for a job, why the hell am I now watching a video on how to do it. However we do it from the outside of the house for the most part compared to this method with the same windows.

[@stevenm5508]

Are these actual or rough measurements? I have to order some replacement windows.

[@nicolaspaglia3760]

@@stevenm5508 rough

[@ronh9384]

Razzman Most of yours probably don’t have a stool and sill right? You probably do more replacements for more modern style windows. On THIS OLD HOUSE They usually don’t show replacing outside trim or installing the insulation.....

[@derrekmitchell1012]

@@ronh9384 most windows get replaced from outside and get wrapped in aluminum trim. That includes old houses just cut the stops and pop new window in

[@rencleavus5213]

Replacement units like those are always done from the interior. The unit butts tight to the blind stop (exterior casing). The unit wouldn't fit through the opening from the exterior.