Small / quick project to kick off the new year. That, and to have a new tap wrench of course. Music: "Your Precious Love" - John Deley and the 41 Players "1940's Slow Dance" - Doug Maxwell/Media Right Productions
Пікірлер: 1 500
@alpinegeordie5 жыл бұрын
WOW ! This is the same Tap Wrench I made at school in 1968. I was 12 yers old and loved every minute of my Metalwork lessons ... You've made a happy man very old :-)
@martinpanev66513 жыл бұрын
Oi a happy man old or an old man happy?
@justie12203 жыл бұрын
@@martinpanev6651 r/woooosh
@martinpanev66513 жыл бұрын
@@justie1220 lol i said it as a joke if u didnt notice
@johncoscia52583 жыл бұрын
Tony
@stanburdick97082 жыл бұрын
never had metal shop but got all As in wood shop and was the teachers right hand man........wish I would have taken metal shop, but were learning now late in life
@johno78585 жыл бұрын
These videos are so good I’m afraid my girlfriend will catch me watching them.
@RabidBadger_5 жыл бұрын
Ever since the pasta maker video my wife watches them with me.
@RazzUK5 жыл бұрын
@@RabidBadger_ same, but sometimes I catch her watching videos without me o_o
@rabie4x45 жыл бұрын
My wife told my girlfriend I was watching them..
@wierdalien14 жыл бұрын
@@rabie4x4 sounds complicates
@tillmartens57703 жыл бұрын
I guess now there is the question wtf are you doing when you watch these videos!?
@nameofdane5 жыл бұрын
I laughed every time you put cutting oil on something, because I'm an adult.
@Bkrites5 жыл бұрын
Oh good...I'm not the only grown man giggling about that....
@TMatt0075 жыл бұрын
I had to call my son in to enjoy the laugh with me. I had to tell him it doesn't really make that sound
@davidpook73065 жыл бұрын
That's GOOD editing!
@gregfeneis6095 жыл бұрын
#nevernotfunny
@manden225 жыл бұрын
@@gregfeneis609 same here :D
@petergeegarden9194 жыл бұрын
I am 70 years old and made a tap wrench almost exactly the same as that one in our Tech school fitting and machining class about 56 years ago. I think it is still among my tools somewhere.
@arod6845 жыл бұрын
So I watched this with my young son. The face when you snap the part like a twig got a wide eyed look of shock that was priceless. Thanks for a great video and a great memory.
@stonearches28835 жыл бұрын
arod684 If you haven’t already, watch his Ring Roller video. Love the way he cuts the bar stock.
@Lucas-nf7uj5 жыл бұрын
Lol that's awesome
@doncooper39464 жыл бұрын
Many times when I've broken metal - there's been a richochet. Something about all the energy that gets out. I really would laugh hardily if the next time he breaks a part apart - it's followed by a dangerous-sounding multiple richochet!
@pacman101824 жыл бұрын
@@doncooper3946 knowing tony, it'd be a bullet ricochet sound
@transmissiondepot30793 жыл бұрын
mop
@minerharry4 жыл бұрын
We are truly living in a modern era. Additive machining has gotten to the point where even hobbyists like ToT can convert some metal chips (and, of course, the tool matching up with the current form of the part) into a beautifully square stock part once again. A true modern marvel.
@21mph125 жыл бұрын
Dammit Tony, I was actually going outside to to work in my shop. Now I have to sit here and watch someone else work in THEIR shop.
@RexusKing5 жыл бұрын
Feels the pain here, man. I got less than 5 hours to sleep!
@billqqq5 жыл бұрын
my shop is heated up to a balmy 55 on the weekends so I can work without freezing my bolts off, and here I sit in my easy chair in jammies with a hot cup of coffee watching old tony.
@mysterymete5 жыл бұрын
Enjoy the warm shops, boys. I have to fabricate a battery tray and transmission cross member tomorrow. ...After replacing the transfer case in my truck. It's currently 18 F and the forecast says I'll be freezing my frickin' nuts off even more tomorrow.
@gibbsey95795 жыл бұрын
@@mysterymete Sort of the same problem here in downunder land. 38c (100.4f. Off to my air conditioner..
@consaka15 жыл бұрын
@@gibbsey9579 Yeah it's a very similar problem I seem to have that problem quite often here. No shop so its outside on a concrete slab and if it isn't freezing cold then it's raining. If it's not raining it is too hot. How do you know it is too hot? When the welding spatter sizzles when it hits your skin. :)
@OlivierVerdier5 жыл бұрын
Thanks Tony for your film And note that your new cutting oil squirt ensures you endless watch time from my two daughters (aged 3 & 5) !! 🤪
@dimitrioslykissas79815 жыл бұрын
I knew the squirting sound would be an istant fan favourite as soon as I first heard it myself.
@Kp61dude_5 жыл бұрын
I was going to comment the same thing except no kids only my immature self.
@NodnarbRS5 жыл бұрын
I paused it right before the squirt, called my wife in to see something, and hit play. I have no regrets.
@SWhite-hp5xq5 жыл бұрын
Yes, more oil squirt fart sounds please! 😆
@RonCovell5 жыл бұрын
Tony - you made my Sunday morning! I fully realize how much time goes into making a 20-minute video - I really appreciate your doing it so frequently! Also, you explained why I sometimes get left-handed threads - thanks for clearing up the mystery!
@ahaveland5 жыл бұрын
I enjoyed this too, though unless I'm mistaken I think the joke is that a right handed die cannot make a left handed thread however you might try... Helices have something called chirality, DNA for example.
@Drache8325 жыл бұрын
@@ahaveland I think he was joking aswell
@ClumsyCars5 жыл бұрын
He was, lol. Sometimes ill run a die down the regular way then flip it to get the threads all the way down.
@ahaveland5 жыл бұрын
@@ClumsyCars Phew! Then that's a relief! :-)
@danallured58065 жыл бұрын
@@ahaveland lol, it was THE Ron Covell who posted the comment, he's forgot more about metal work and sheet metal than you or i will ever learn! trust me it WAS a joke from him!
@Langerang5 жыл бұрын
When he “snapped” the round stock I had to do a double take. I’m not a machinist but a heavy equipment welded and it made me laugh. The sound effects and the many cuts you take must be so time consuming. Shows you’re proud
@Reman19755 жыл бұрын
I'm not sure about your new wrench, It looks a bit too hefty to me. We all know that the correct procedure immediately after snapping a tap off in a hole is to launch the tap wrench (Compleat with the stub of snapped tap) as hard as you can across the workshop while screaming "Demonetizing words" as loud as you can. This new wrench looks stout enough that a ricochet could do you some serious damage ! Just looking out for you buddy. :)
@DavidKholz5 жыл бұрын
@David Parry Google 'scream jar', no idea if it really works, but might be an alternative ;)
@royreynolds1085 жыл бұрын
@David Parry Do you know how the one-armed mined drilled his holes?
@notsofresh85635 жыл бұрын
I watched a guy with no arms tie his shoes....
@Reman19755 жыл бұрын
@@notsofresh8563 Well, I guess he was either a smart ar5e or a clever dick. :)
@myownsite5 жыл бұрын
@@DavidKholz Woah I need one for Counter-Strike.
@FrenchGuyCooking5 жыл бұрын
Your handwriting needs to be a font.
@pieteroehlers97165 жыл бұрын
Salut✌️
@netman875 жыл бұрын
oh alex o/ for somereasons didnt expect you to be around this comment section.
@ogi225 жыл бұрын
Oh, just don't make him do his intro with a pasta, similar to a Cody ;) As always, loved that clip. I really like the way you show that engineering thinking process. Something that is missing in a lot of modern projects. My dad (old school engineer) was always telling me a quote from his teacher: "Before you put something together, think on how you take it apart". God i wish more engineers would make their "creations" according to this rule... Fixing modern machines would be way easier... Recently had to exchange a drive wheel of a 40m crane. Bearing just fell apart... guess what, there was no greasing point on the bearing! Damn wheel with a shaft weighted around 150kg... and had 700kg drive fixed on it... And everything would be just fine if some damn modern engineer had a revelation that bearings need to be lubricated to work properly...
@kup19545 жыл бұрын
@@ogi22 Modern machines are not meant to be taken apart and repaired - just throw them away and buy a new one (from us again) is their way of thinking
@ogi225 жыл бұрын
@@kup1954 OK, try to do that with a 40m crane ;) I can see that customer's face if you told him to buy a new one because a bearing just died, hehehehe :D
@chadatha55605 жыл бұрын
Not going to lie I definitely expected taps to be played during this video but nothing died. Grea.....well pretty good video
@oddbjrngudmundsen71665 жыл бұрын
Thank you TOT for making these fantastic videos! Jokes dry as a desert and informative content. Makes us young mechanical engineers learn how things are done in the shop. Greetings from Norway
@masterofnone5 жыл бұрын
Me and Tony making a tap wrench. He does all the work I just watch and enjoy. This sounds familiar.
@coreyballard83595 жыл бұрын
Master of None as an old wise man once said, “I love hard work, I could watch it all day.”
@AflacMan135 жыл бұрын
Supervising... we are supervising. :-P
@mikhailman5 жыл бұрын
The comment section on TOT videos is amazingly entertaining to read. This community is great!
@deanblack7505 жыл бұрын
Im currently Stationed in Korea and still keep watching your videos in my barracks to keep my shop mind smart for when i get back to my machine shop in Montana. Keep em up! I wanna get your Meatball Cat shirt soon.
@Fattrucker5 жыл бұрын
Hi Tony . I've only recently discovered your channel . You can thank AvE for that one . But I have to say you have an excellent channel and sense of humour . It would be interesting content that you have anyway . But your "style" elevates that content to another level . Thank you sir . I look forward to many many more hours of chuckles and "in" jokes . Fattrucker
@Reman19755 жыл бұрын
Yeah, It's amazing how many channels have paid homage to TOT with the whole cutting bar stock with scissors thing alone. This channels absolutely unique though.
@WBush-uc9pe5 жыл бұрын
Right on Fattrucker! TOT & AvE make *the best* disembodied-hand porn on the internet, don't they?
@lunchboxproductions11835 жыл бұрын
@@WBush-uc9pe "disembodied hand porn" There's a Google search ya don't wanna see the results of.
@JoseSilveira-newhandleforYT5 жыл бұрын
@@lunchboxproductions1183 Now you made me look for it. Not good...
@franspigel92815 жыл бұрын
Hey which video does AvE mention TOT in?
@juhailmarisalminen5 жыл бұрын
18:52 : The sound of OneTube hacking your KZbin account
@scottcmiller5 жыл бұрын
There’s something so satisfying about homemade tools that look this beautiful. An entire series on making various homemade tools could be really neat. Especially one where the tools are planned out so that each is made so a more intricate tool could be made, so by the end of the series you’ve got several homemade tools that are necessary for making something pretty intricate/ complex. I guess clickspring has kind of done this with his videos. But a series where the tools are less pieces of art and more practical machinery tools that have that great heft and weight to them... I’d watch that allllll day long.
@boryscholewinski43705 жыл бұрын
Just to be clear I like my garage and my tools but have no connection with machining what so ever. None. But your videos are just soooo goood. So good. Thats why Im here. Thank you.
@mikeking74705 жыл бұрын
Same here, I'm just here for the videos, my "machine shop" starts and stops with a few files, a couple of taps, and a bench vise.
@ryanmalin5 жыл бұрын
I’m guessing you mean no connection with machining. I’m pretty sure that’s what Tony read also
@boryscholewinski43705 жыл бұрын
@@ryanmalin yup. Edited. Cheers
@mmmhorsesteaks5 жыл бұрын
Noticed the parts slipping the first time 'round. I shoulda said something!!
@thorsten50525 жыл бұрын
oh yes, i saw it too
@Postal03115 жыл бұрын
I'm glad to see that someone else doesn't like radius cutters. When I don't mess up the setup with one, I tend to end up with a bad finish. When I do set it up wrong, I get a great finish and a scrapped part. It feels like black magic to me to get the results I want.
@saxon2155 жыл бұрын
I can almost guarantee I'll never ever make anything from any of your videos, however I can guarantee I'll ALWAYS watch your videos
@mildyproductive97265 жыл бұрын
This is one of the only things I might eventually make. But my version would be obviously homemade from a low earth orbit.
@crackedemerald49305 жыл бұрын
Hah! The handles TURNED out well! I regret nothing
@factsdontcareaboutyourfeel75685 жыл бұрын
Based on my made up statistics, I score this documentary a solid 10/3
@ButBigger425 жыл бұрын
5/7
@iwtommo5 жыл бұрын
Gr8 m8 i r8 8/8
@Canalcoholic3 жыл бұрын
93% of statistics are made up on demand.
@itsvortex11075 жыл бұрын
Hey Tony I've been watching a ton of your videos lately I just recently moved out of my dads place and have to go stay at my mom's, also a student at a trade school (precision machine tech) I love your realism, and how you can incorporate that, along with the irony into a instructional video that a younger worker like me can progress off. I did not have to worry too much about space, my dad is a tool junkie, its a gene, but i now have to organize and set up my own little shop in a single car garage. Without these videos, I would not have inspiration to continue my hobby and career at home like I do at school.
@soarer2825 жыл бұрын
turn it in the right direction or you get left handed threads... omg that's gold.
@stevefarley70145 жыл бұрын
Dose TOT know it doesn’t work like that?
@aarons28484 жыл бұрын
My two month old is relaxed by all of your videos. Thank you from the depths of my soul.
@fryingdutchman89215 жыл бұрын
Judging by the high viscosity of your cutting oil I guess it is freezing cold in your shop. The other possibility is you are using honey as cutting fluid... :D
@chrissavage59665 жыл бұрын
Based on the sound it made when dispensed, had to be Maple Syrup, no?
@Volcker19295 жыл бұрын
Chris Savage I always tap with Maple Syrup, don't you?
@EngelWulf5 жыл бұрын
For the slow tapping use molasses
@jimc36885 жыл бұрын
Aeh ?
@gregfeneis6095 жыл бұрын
Looks like chainsaw bar & chain oil, or STP
@kasedillla98115 жыл бұрын
After recently being employed at a fairly large machine shop, I can fully appreciate the work that goes into even something small like a tap wrench. I am a welder/fitter, but have been learning a good deal about machining lately.. and it has made your videos much more enjoyable for me than previously before. (not that they weren't enjoyable before, I just understand a lot more now)
@petererdnuss63495 жыл бұрын
I honestly love your humor. Sittin' in my chair, giggeling. Try to spot every hidden joke. It's really a pleasure to watch your videos
@johnellis19525 жыл бұрын
For me, an interesting element of this 'simple' project was seeing just how complex and versatile the lathe is...especially when supported by a diverse set of cutting tools. With enough knowledge and a complete setup it looks like you could make just about anything (this theory being supported by your previous projects). Keep up the good work.
@WisdomVendor15 жыл бұрын
I'd like to take this moment to point out that the average 'easy-out' is NEVER easy and that they are all designed such that there is a significant portion which WILL break off in the worst place possible when you are in a position of having the least amount of time to deal with it. Now, back to the regularly scheduled programming.. and Stay in school kids !.
@lilflatty24725 жыл бұрын
And then you have to take an expensive chisel or punch and grind it down small enough to fit down in whatever hole it’s stuck in, hammer the broken off easy out out of the part damaging half of the threads that were still there, drill it out over sized and then helicoil the part. lol.
@kerynbell4295 жыл бұрын
Every one I work with and I call them maybe outs
@bluegent75 жыл бұрын
Like Ye Olde Laconians would say: _I laughed._
@rotorhead58265 жыл бұрын
Glad I'm not the only one that has this problem. I think the next set of easy ouch I buy is going in my oven at 500 dungarees Frankenstein for about an hour. Maybe that'll give me a snowballs chance in hell of not having one break off.
@Gottenhimfella5 жыл бұрын
@@rotorhead5826 Best thing I ever bought for extracting jammed screws and studs was a left-hand spiral set of drills. But at a pinch, just sharpen a drill backwards (and spin it backwards, of course) while feeding aggressively.
@trashes_to_treasures2 жыл бұрын
Every now and then, when November kicks in and depression knocks on my door, I come back here for the oil sounds. Life can be so simple sometimes.
@lemagreengreen5 жыл бұрын
I think you're right about that being a home-made/apprentice project. I have vague memories of it being a project at a technical college I once went to, the sort of thing they progressed you to after you proved yourself able of making such complex items as a drill drift.
@_harkinzator15365 жыл бұрын
That noise was payback for outing △neTube.
@ironbomb67534 жыл бұрын
That was a great ....joke...😂🤣👍
@jackalovski15 жыл бұрын
Can you make an extra one for Martin over at wintergarden wednesdays? He needs to stop putting taps in the drill. At the rate he's going his marble machine will contain 50% tap by the time it's finished.
@GregorShapiro5 жыл бұрын
Wintergatan needs a fixture to keep the tap colinear with the drilled hole. I'm afraid a tap wrench would not help Martin enough though the feel in the hand of the cutting process would definitely be a huge step forward.
@kyleballing5 жыл бұрын
Yes, oh yes. Martin needs a tap wrench so badly. I need a soundproof room and a burlap cat to kick whenever I watch him tap a hole. You can also tweak a C clamp with a flat on one side and a center on the other to keep your tap nice and straight. Most taps that I'm familiar with have a center feature in the back.
@Dr_Do-Little5 жыл бұрын
We all love Martin but sometimes... 😵 I just want to cry. lol
@y2ksw15 жыл бұрын
It's so much fun to watch you! You remind me one of my teachers, a smith, who was joking and kidding us all day long, and we enjoyed it. A winning combination of profound knowledge of human kind and tools and materials. He was one of the main reasons why I did dedicate a large part of my life to metal working.
@OsaderLP5 жыл бұрын
Happy tap wrench appreciation day!
@anthonylosego5 жыл бұрын
"I already used it to tap these holes in the wrench." Perhaps it's something to do with being a Tony, but subtle sarcasm is just so awesome. Don't ever stop.
@smcary5 жыл бұрын
Thanks for making this, I am total nug home machinist, and these videos are a huge help in visualizing how to go about making things. Wore my TOT T-shirt yesterday....hot chicks were all over me.
@11zekim5 жыл бұрын
Sweet, nicely built. That design was a Pratt & Whitney catalog item in the 1880's, I have a couple about that age I still use. Originals were drop forged and case hardened; the handle ends were egg-shaped for comfort, knurling for adjustment was instead applied near the threaded ends. I reckon it's been a popular student project since the patent expired, like 100 years ago.
@ristopoho8245 жыл бұрын
I'm starting a school on machining tomorrow. So this evening feels like a good time to have a small binge on your videos =) Thank you for teaching me about these things, and more than that, thank you for making me more interested in the work.
@NilsJakobson4 жыл бұрын
I have discovered that there isnt anything more satisfying on the entire KZbin than watching machining equipment in action prefferably with easy classical music in the background.
@franktedder12365 жыл бұрын
Ah yes. I approve the use of " EmptyKetchupSquirt.mp4 "
@marscruz5 жыл бұрын
Sweet one. Pride of ownership as well as design and construction. She's a beauty.
@johnopalko52235 жыл бұрын
I love the "edgefinder" glyph you flash on the screen. I had to pause the video and stare at it for a while before I figured it out. (Linux user here. Not that conversant with Windows and Mac stuff.) I don't know what's more fun: watching your videos or deconstructing them afterwards.
@chasmosaurus35 жыл бұрын
It was a bit of an obscure reference. I don't know anyone who calls the modern MacOS Finder, Finder.
@sneakdotberlin70855 жыл бұрын
chas williams that’s what it’s called and that’s what shows when you point at it in the dock and what the application menu says when you are using it
@90FF15 жыл бұрын
No machinist here, but 67 years ago I made that same tap wrench in HS school machine shop. I'll have to dig it out to see if my knurls were worn away from lack of use. Use 'em or loose 'em, they say. Thanks for the memories.
@azyfloof5 жыл бұрын
"Thanks a lot for watching. Keep your tap in a wrench!"
@tabaks5 жыл бұрын
Azy, AVE called, he wants his joke back.
@justtinkering60545 жыл бұрын
I am sure I am not the first person you pushed over the edge and I know I won't be the last.... I bought my first lathe last week. You make it look so easy and fun. I am now actively searchig for a mill. I looked at an old Bridgeport a couple days ago. My wife is not happy about all this. ;) Thank you Tony!
@Kenomojo5 жыл бұрын
Hey tony, your oil bottle makes weird noises. Maybe you should oil it. :)
@iwtommo5 жыл бұрын
Sounds awful, guessing Avon79_squelch.mp3
@squelchstuff5 жыл бұрын
@@iwtommo That would be in the ear of the beholder dontchaknow?
@RexusKing5 жыл бұрын
He should have a smaller oil bottle for this type of situation...
@vincentbaelde-millar6705 жыл бұрын
Trust ToT to make a 20 minute video then throw in a "make sure to turn it the right way so you don't get a left handed thread" just to make sure we're still paying attention. This is a man who's worked with juveniles before.
@jimmydiresta5 жыл бұрын
so good!!!!! splirrrrth!! hahah
@gmartin80435 жыл бұрын
Tony, your truly an expert in machining, you explain everything so clearly, it’s fascinating watching you work and your sense of humor is phenomenal , I enjoy it. 👍
@dk-bw4gk5 жыл бұрын
I hope you're sending this to Wintergatan. I don't think he's aware of these devices.
@lachlanlandreth90695 жыл бұрын
I feel as this video is directed to him...
@craigcottam5 жыл бұрын
Excellent back to basics tutorial. Over the last couple of months I have watched all of your videos and this one answered a few basic questions for me. Thank you.
@bradleystannard34925 жыл бұрын
i dropped my phone when you said ‘together’
@davidjames10075 жыл бұрын
Thank you very much for sharing and especially the plans. I just finished mine and as a novice hobby machinist I am very happy with the result, even though it's a bit big for my everyday use. I will make one 1/2 or 1/3 size to use on my 2mm to 5mm taps that I regularly use.
@NuttyforNissan5 жыл бұрын
You know if you watched your videos before you made them these mistakes wouldn't happen.
@EversonBernardes5 жыл бұрын
Rookie mistake.
@michaelboyle95125 жыл бұрын
Seeing the videography and production put into the videos, I'm pretty sure it was meant to be there... Something along the lines of "hey diy'ers this is quite complicated to fabricate, and it's ok when your project turns out not perfect like a Chicago electric tool thats "professionally" made. It is a hobbyist channel... And Tony has said many times, he is a hobbyist, but one with knowledge many of us metal working hobbyists are interested in. Stop whining...
@mattiasfagerlund5 жыл бұрын
@@michaelboyle9512 read his post again. it's hilarious. how could tony possibly watch his movies *before he makes them*? Grandfather paradox, anyone? And always, but always remember the quote "would you like some cheese with that whine?"
@jamesmccann5315 жыл бұрын
@@mattiasfagerlund r/whoosh
@Laugh1ngboy5 жыл бұрын
@@mattiasfagerlund Well he should go to the time travel section of his machinists handbook. Then use the lathe settings to go forward and watch his video.
@littlesnowflakepunk8555 жыл бұрын
"I already used it to tap the holes in the jaws," Such a clever, casual line, holy shit
@John_Ridley5 жыл бұрын
I just finished rebuilding my first lathe. While making the T shoe to fit the AXA post into the old compound I had to use a box end wrench on the M14 tap. I think it's a clear sign that this right here needs to be my first ever lathe project. BTW you and Lyle Peterson are the only two machinists that I regularly go back and re-watch videos from. Outstanding stuff.
@bill3815 жыл бұрын
Spent this past Saturday making one, thanks TOT!
@dinoscheidt5 жыл бұрын
I’m a white-collar worker; remembering the large workshop of my uncle and love to watch these videos just to wind down.
@philipeby54185 жыл бұрын
Is it weird how excited I get when you post a video.
@MrZhefish5 жыл бұрын
how about a tappingware party, where we all get together, drill and lube holes and tap them just for the fun of it. we could also incoporate dresscode, like one year just with welder aprons, next time hillbilly style just with dungarees and topless... arrrrrrrr
@saminvincible41843 жыл бұрын
Never ever seen lathe a lathe in real life, but enjoy see you working on it. And your sense of humour, lots of prayers and love from Pakistan
@metricstormtrooper5 жыл бұрын
I saw the movement from way over here in Australia, I thought you should have noticed it far easier from where you were standing.
@rickguyevans5 жыл бұрын
That is a hand-made tap wrench (holder), just like the one I made 45 years ago while going through a millwright apprenticeship program at a local steel mill. The lesson for this tool making experience, was to use only a file, drill press/drill bits and tap wrench. I still have mine and may knurl the ends with my Myford hobby lathe! Thanks for the memories:))
@MrglMrgl5 жыл бұрын
your last comment about making someone a smaller tap wrench could be made crueller; by only accepting large taps with tiny handles
@joecool50345 жыл бұрын
Haha that would be an awesome little present for a machinist buddy.
@hckr475 жыл бұрын
Actually I've had to chase out hole with a large tap that a small handle wrench would have been great for. And no I'll never ever use a tap socket again, I've had enough edm practice.
@GabrieleBonetti5 жыл бұрын
And what about a tiny tap with unmanageably big handles? You win if you manage to not break the tap in the first use
@hckr475 жыл бұрын
Got one of those 2' of handle for 10-32 is not good
@lodgecav4905 жыл бұрын
I had a dodgy curry last night, watching this Sunday morning, but every time you squirt your oiler I feel an urgent need to visit the small room, TOT 20 min video lasts 40 min...Excellent!
@loydsa5 жыл бұрын
Oh dear, I don't know if you have ever seen the carved wooden elephants that are available in tourist traps which some people collect and arrange in descending size on their shelves? Now I have the desire to make a set of tap wrenches in descending size from gigantic to cute. Thank you TOT though my husband may curse when I displace his elephants :-) Regards Sarah
@pauleskridge72095 жыл бұрын
I really enjoy these videos of machine work you post. Machine work is something I've been wanting to learn with all the things I've learned over 8 years of metal fabrication. Mills,CNC machines and lathe work are things that I lack lots of knowledge in.thanks for sharing these and keep up the great comical work...cheers to you sir.
@khominhvi5 жыл бұрын
7 seconds in and I am already laughing. January 6th shall hence forth be known as 'International Tap Wrench Appreciation Day'.
@rpavlik15 жыл бұрын
What an... Epiphany! 😁
@peterxyz35415 жыл бұрын
Of course!!! I could just SNAPT IT TO LENGTH, affording a 3,000.00 lathe isn't the problem! I LOVE THIS CHANNEL!!!!!!!! It's always a pleasure, educational AND fun AND funny!!!
@Nerfornothin1115 жыл бұрын
Went ahead and liked the video. Didn't even watch it yet.
@byronselorme94775 жыл бұрын
I appreciate the showing of your mistakes and the explanations so much Tony. I learn so much from watching these videos. Thank you
@rennerhogan91385 жыл бұрын
Got my ToT hoodie this week and I love it! Great vid as well
@inspireonex5 жыл бұрын
The added sounds of the oil and grease being applied are like icing on the 🎂.
@Falney5 жыл бұрын
Some metthias level sound effects going on.
@crystalsoulslayer5 жыл бұрын
But where is the mouse?
@michaelg_8395 жыл бұрын
@@crystalsoulslayer TOT's cat ate it.
@erikig4 жыл бұрын
I’m watching this on OneTube and I still appreciate it
@pearcemachineshop52005 жыл бұрын
I’ve one of those corner rounding end mills, although mine seams to work better than yours, only thing that springs to mind is if yours is a bit blunt, also they like to climb mill not conventional milling, great video Tony , I always smile when the tube says you’ve uploaded one. Regards Alan.
@robertlewis46665 жыл бұрын
Just finished making mine. That threaded blank was a brilliant idea to ease manufacture! I don't have your tooling, Just a 180 mm mini lathe, a set of drill bits, taps and dies, hacksaw and files. Be that as it may, my new wrench hold taps from 3 mm to 20 mm. and is a great new addition to my workshop. Thanks for posting!
@ThisOldTony5 жыл бұрын
nice!
@faxezu5 жыл бұрын
11:32 these sound effects are powered by a bottle of ketchup, am I right?
@graemebrumfitt66685 жыл бұрын
Tony use a diarrhoea sound next time :)
@brianevans19465 жыл бұрын
The bigger the blob, the better the job..
@Bl4ckw0lf15 жыл бұрын
Shhhhhh, I'm not there yet.
@HandToolRescue5 жыл бұрын
So gross sounding, haha.
@vojtechtax97235 жыл бұрын
Unlike the mayo sound from previous videos
@SirBoden5 жыл бұрын
Working on a quantum tap wrench. Superpositioning of right left hand threads is tricky.
@WireWeHere5 жыл бұрын
Thanks for the inspirational video. I felt better when I saw it offered by youtube, an easy choice to make. I haven't moved in 8 days from my bedridden reality. I'm inspired now to continue my search for a way to improve my situation and that too the situation of so many unfortunate others. I like to think I've been on a five year experiment into what can go wrong when your medication of fifteen stable years is suddenly decreased to a quarter of the required amount. I must say I always feel better after watching one of your creations. It was a welcome break from reality. Well, back to reality. Peace.
@BillyONeal5 жыл бұрын
TOT video - time to drop everything!
@pekkasaarinen29025 жыл бұрын
Mostly pants..
@jackdotzman29085 жыл бұрын
Not only are your videos educational and interesting you have been blessed with a great sense of humor and you use that very well too. Always enjoy watching Uncle Tony. Thank you from Missouri.
@stemer11495 жыл бұрын
Nice build. Now, did I understand you correctly, stating that you own 4..5 tap wrenches. That surely must have been a mistake, you surely were referring to 4..5 drawers full of them?
@robertgemski77285 жыл бұрын
had the choice once to either take “advanced pipe welding” OR “machining” at trade school....i took the welding course ,got really good at it too! But regrettably my body was like “no freakin way” and 2yrs in the field i got occupational asthma........to the point i had to quit welding altogether. I had been a carpenter for @15yrs at that point so went right back there what i knew best BUT i regret not taking the machining course 😔you are an amazing craftsman my friend and i am in awe of your skills.....
@dancrawford26905 жыл бұрын
nice project Tony,im new to this hobby,im just about finished restoring a 1949 colcheser master lathe and will make this my first project 👍
@brianbutterfield98915 жыл бұрын
Dan, do you have any video of this restoration? Would love to see it. :)
@dancrawford26905 жыл бұрын
@@brianbutterfield9891 i have lots of pictures but not vids,ive searched the net many times and cant find another that looks like mine,im thinking it must be a very rare model
@John_Ridley5 жыл бұрын
@@brianbutterfield9891 I just finished a restoration yesterday. I only shot before/during/after videos, they're on my channel. I have a bunch of photos here: ibb.co/album/k9T7va
@TKyCoss2 жыл бұрын
I remember back in the dark ages of machine shop at college making a mock prop shaft with a long tapered section. the way this was achieved was by doing turning between centres, but offsetting the tailstock. Then we could cut the long taper with the feed and not have to muck about with the compound. Also taught us about offsetting (and then resetting) the tailstock.
@CrazyCodger5 жыл бұрын
Woah Tony, I know I've been subbed to you for a while, but dont you think we're moving too quick here?
@kengamble85955 жыл бұрын
Oh, so you've got a commitment problem huh ! 😊
@richhagenchicago5 жыл бұрын
Tony, I started watching your videos a couple weeks ago, now, unshaven and not having eaten in two weeks, I am putting back together my old Atlas Craftsman Lathe and going to try a few projects. I made a few smaller items back in the day with a small Sherline lathe I have, but it lacks the power and threading gears of the slightly larger machine. Your humor and detailed explanations are appreciated, so thank you for sharing your videos and expertise.
@tommasofossati51235 жыл бұрын
I expected an opus die filer action for cutting the groove, or at least to fix It. Your filer will Be jealous of the other machines, you know how this story could end.
@RideaKawasaki774 жыл бұрын
Love the "OneTube" with all seeing eye. Very foreshadowing brother. You are good honest man and I love your creativity and sense of humor. God bless you and the family.
@bdkj3e5 жыл бұрын
The lathe cutting reversing halfway is REALLY throwing me off, I'm five mins in and I've already got a headache, what have you done to me TOT?!
@cmotdibbler44545 жыл бұрын
Colchester lathes have an add back material feature, it is part of the time travel circuit... providing the original owner didn't cheap out on the options list.
@craigsudman45564 жыл бұрын
Bigger IS better! There is nothing more satisfying that making your own tools. Thumbs up.
@qwertyentertainment33495 жыл бұрын
Darn, those subtle subscribe messages seem to have worked on me
@SecoMC5 жыл бұрын
@ 0:03 that work bench could almost tell the channels entire history just with the battle scars