It's a terrible joke. When you are really dirty and you take a bath, you can leave a ring of grime around the tub. The first one in is the leader, hence "ring-leader".
@plewelly6 жыл бұрын
That's what I thought it must be as well.
@gelerson16426 жыл бұрын
Also, since there are multiple people in the tub, obviously somebody had to come up with the idea and convince the others to bathe with him. Thus, double-entendre.
@georgehelliar6 жыл бұрын
Matthew Montgomery. Yup. And if it were a given that the audience would understand the idea of sharing baths, this really dates the book. Do we have to rename the channel 'this archaic Tony'?
@leverknight16 жыл бұрын
I was thinking the same as well as filling once and then cycling people through, one at a time nobody else will have a higher ring on the tub.
@tylerchaffee10476 жыл бұрын
I was thinking something to do with a circus.
@SeraphimKnight6 жыл бұрын
Skip the chit-chat?! That's the whole reason why I watch these videos mate
@azurplex5 жыл бұрын
Which is his ironic joke because the whole vid is talk.
@azurplex5 жыл бұрын
Soldering is not a strong mechanical bond. Just a surface bond. It Melts at temperatures below 200F. It cracks under force, heat cycles or vibration and therefore needs strain relief to prevent joint failure. Usually only copper to copper joints in plumbing or electrical connections. Brazing is much stronger, enough that it can be structural. Is done at much higher temperature and can join several metals even dissimilar ones with a strong joint often as strong as welding. So, no. They’re not essentially the same.
@dravenwrightlee83904 жыл бұрын
r/wooosh
@luckyPiston4 ай бұрын
Hmmm , But your still good with the "Step into sexy" moment , right ?
@olivialambert41246 жыл бұрын
I like the longer videos. You aren't asking for 15 minutes of our time, you're granting us 15 minutes of yours. Now admittedly I'm not in your average viewer but I'm certainly happy when I see a longer video anyway.
@Jimmeh_B6 жыл бұрын
so, very, well said :) You're as awesome as TOT himself.
@heronguarezi65015 жыл бұрын
How can you have 1000 Subscribers and no videos?
@karlwhalls29155 жыл бұрын
Heron Guarezi India.
@buckeyebeliever33975 жыл бұрын
1400+ subs and no videos. Huh
@Kaysler5 жыл бұрын
Agreed.
@Abom796 жыл бұрын
The floor is no place to keep that Avon79 sexy cream! Gotta keep it in the top drawer!
@tonyus81976 жыл бұрын
It must have fallen off the table... The one that has his vise mounted on... He might keep his "stick" in it and could get stuck... With a stuck "stick", how can you reach the top drawer? I mean not everyone is blessed with a large vise ...
@CNCJoeFromRomeo6 жыл бұрын
No doubt affiliated with the "hand cranking"
@stephenwood26296 жыл бұрын
Lol ya that was funny along with the hand crank joke. Some men carry there girlfriends with them at all times LMAO
@user-zq6pj5jo8j5 жыл бұрын
Don't you mean Abom79 Hand cream? We all saw the video in the bathroom...:)
@Feralhyena5 жыл бұрын
The blue is surface impurities trapped by the flux from the cobalt matrix of the insert. You made Smalt, Cobalt Alumilite, where we get the famous Cobalt Blue.
@leonardpearlman40175 жыл бұрын
Cobalt Glass! ?! Makes sense, if the "cemented" carbides are cemented with cobalt. Then you get cobalt oxides, which dissolve in the flux along with the other oxides, making your own custom bits of glass!
@andraskatona97664 жыл бұрын
The boron in the fux made a nice green flame. (Sorry, I had to add this somewhere)
@HandToolRescue6 жыл бұрын
Pfff....don't worry about length. I released a 47min video, just to see what would happen, but really anything over 7 seconds is pushing it.
@zacharyburkum85474 жыл бұрын
It will be relished!
@micahwinters70213 жыл бұрын
And 2.5 hours of planing a log didn’t push it? 🤷♂️
@AsymptoteInverse3 жыл бұрын
I'm really gonna need you to write shorter sentences. I keep forgetting the start by the time I get to the end.
@Jes91193 жыл бұрын
My exes said that same thing, "don't worry about length."
@masterofnone6 жыл бұрын
Why would I skip? You crazy?
@ElectricalExistence6 жыл бұрын
Master of None no skipping allowed anyway.
@Etna.6 жыл бұрын
Me, too!
@AOZMONSTER6 жыл бұрын
I could listen to Tony all day
@aserta6 жыл бұрын
He seems to be, this isn't the first time...and he's talking about short videos. He's coo-coo. 3 fries short of a full meal, 9 horses behind the ring leader, one chip besides the shoulder...
@websitesthatneedanem6 жыл бұрын
Tony for President of youtube!
@ajtrvll6 жыл бұрын
Skip the chit-chat?! Are you mad?
@samcolton55196 жыл бұрын
we cum here for the jokes and info.
@ajtrvll6 жыл бұрын
Barking mad, I say.
@BillGatliff5 жыл бұрын
"Don't eat the flux" needs to be on a t-shirt.
@cgourin6 жыл бұрын
If the book had such an impact on your life it might be that the joke’s on you.
@RosaStringWorks6 жыл бұрын
Seriously the best videos on KZbin.
@grzegorz161006 жыл бұрын
Hi Jerry!
@strangersound6 жыл бұрын
Check out Filmmaker IQ. For the subject matter, they are on the same quality level.
@mrdavearthur15595 жыл бұрын
I agree with you there, funny and educational.
@coalitionofrob4366 жыл бұрын
Hand cranking jokes? AvE hanging around your shop recently.....
@jakemcmillian2 жыл бұрын
I'm still not convinced that they are different people
@PeopleAlreadyDidThis6 жыл бұрын
It’s interesting to read all the “ringleader” joke theories posed here, and they’re likely proof of why people fail to understand the actions of their predecessors in history. For all the clever suggestions, the joke is certainly simple, was utterly obvious at the time, and would have been funny then. In an age when most of the population was rural, electricity and gas weren’t yet universal and were often quite rare, and therefore heating water was difficult and expensive, entire families shared bath water, which probably also had to be drawn by bucket from a well or hauled from a creek. People worked farms and “dirty jobs” industries, in the heat, got really dirty, and in many cases bathed only weekly. Where you might eventually make a dirt ring at the waterline today, the ring was “quick & dirty” then, pun intended-grime, oils, soap. So the first person in the tub, perhaps the head of household, was definitely the ringleader. Everyone used the word in its usual senses, so the pun was obvious. It’s been said that after a family of 10 finished bathing in the same water on a Saturday night, the water was opaque with dirt. Since children often bathed last, finishing with the youngest, the saying arose, “Don’t throw out the baby with the bath water.” Its meaning is philosophical now, but then it was a joke that referred to the fact that the baby was practically invisible in the filthy water. Sounds disgusting, but after a week without any bath...maybe not. Many more people were poorly educated. A seventh-grade formal education wasn’t uncommon a century ago. Life necessitated work, not more school, but while they were behind us in formal education, they were often ahead in practical skills. Nonetheless, times were simpler and so was humor, so the ringleader joke would have been a lot funnier. It’s enlightening to hear old Vaudeville routines from those days. Their uproariously funny humor is beyond corny now, yet there’s a lot to be said for it in contrast to today’s comedy. As for modern interpretation of the ringleader joke, it’s easy to make the same errors people easily make when looking at any historical item. If you don’t know its context, you’ll inevitably judge it (distort it) by modern expectations, analyze aspects into it that never existed, subject it to your own biases, and reach a faulty conclusion. You have to be careful and thoughtful with the past. In some cases, people have forgotten that.
@rileysherraden26546 жыл бұрын
so to put it simply its pretty much a "so why did the chicken cross the road - to get to the other side" joke
@muchtall6 жыл бұрын
Thanks for that. I grew up on a dairy farm, and vaguely recall hearing this joke as a kid. Honestly, it probably fell as flat to me then as it did to me now, and had to be explained then as well. Your explanation seems correct. Matter of fact, the "dirt ring" was the thing that immediately popped into my head when I heard this joke for the first time, again(?). Indeed, the humor is probably lost without proper cultural and historical context. It was probably only because of my rural upbringing that I even managed to connect the dots to make this joke make sense. To most of the populace nowadays, even explaining the that it's a "dirt ring" would have left blank stares as taking a bath is far less common, much less sharing the same bathwater. Bathing. Reminds me of kzbin.info/www/bejne/moHQc5-bZamfoNk
@mz73156 жыл бұрын
I thought this was a rick and morty "theoretical physics joke" meme.
@muchtall6 жыл бұрын
Did you just come here to tell us how stupid us "muricans" are? I suppose you consider This Old Tony is in the same boat for simply posing the light-hearted question. What a miserable human being you must be, either delighting in the trolling of perfect strangers, or casting aspersions on others' intelligence simply because your cultural history differs from theirs. Perhaps both. Regardless, neither speaks well of your own intelligence or ability to see things from others' perspectives. Maybe if you use a few more swear words, you'll sound more intelligent and win people over to your argument.
@5995Oblivion6 жыл бұрын
VΛPOR SCUM Damn dude! You shut him right up! Lol, nicely put.
@oneministries48783 жыл бұрын
Older cast iron bathtubs had a tendency to be cold around the edges and back in our day it was common (because it was so much work to heat up water on a wood stove) to not throw out the water from the first bather but simply heat it up with an extra pan of water. After a few bathers (normally kids in a family) there would be a waxy/greasy ring around the edge of the tub. Based on that, it’s amusing at best an appropriate for a 7 year old joke book from the early 30’s.
@costarich8029 Жыл бұрын
Yep my mom told me stories of half a dozen kids taking baths in the same water, and the younger kids had to go last as they were presumed to be more likely to pee in the tub.
@johnkemas73448 ай бұрын
Sounds about right to me!
@alaskamike35774 жыл бұрын
Never skip the Chit chat Tony, you are a master at it. Truly love your work and have learned a lot from you. Many thanks and keep um coming.
@60mithai6 жыл бұрын
I come here for the slope of the tangents.
@felixar906 жыл бұрын
The thing I hate about your videos is that they end.
@danielroe8456 жыл бұрын
'Dont eat the flux' would make a brilliant welding mask or tool box sticker.
@roberthaas53725 жыл бұрын
I'm a plumber and I highly recommend only eating flux if you chase it with bleach. It's like a jack and coke speedball.
@roberthaas53725 жыл бұрын
Flux and Draino. 😂😄
@roberthaas53725 жыл бұрын
You'll need to chase him with an alkaseltzer
@davidwillmore5 жыл бұрын
I need a t-shirt!!!
@johnopalko52235 жыл бұрын
I remember those books! One of my favorite books was called "The Boy Electrician," or something like that. It was published in the 1940s and still in our library and contained safe and sane things you could do at home, like getting ahold of an old x-ray tube, building a high-voltage power supply, and using it to make radiographs of your hand, your sister, or whatever. It was probably that book that finally convinced me the grownups really were out to kill us. Well, that and the A. C. Gilbert Home Atomic Energy Lab, that contained a spinthariscope, a cloud chamber, maybe a Geiger counter, and, of course, samples of radioactive materials to make it all work.
@harikrishna69 Жыл бұрын
I remember "The Boy Electrician " with great fondness. My copy is no longer with me, but that book shaped my future.
@tyttuut6 жыл бұрын
18:43 "I just used a zip disk..." And then all the retro computer dorks were confused.
@thelikebutton44055 жыл бұрын
I'm very well established in this field and I very vaguely have a clue what he's talking about lol. A grinder cutting disc is where my money's at. 😂
@totallynotabot1514 жыл бұрын
And if that doesn't cut through the HSS you use a Jaz disk instead.
@tyttuut4 жыл бұрын
@@totallynotabot151 If you don't have a Dremel on hand, a Clik! disk works too
@brianbutterfield98916 жыл бұрын
two videos in one week? Sweeeeeet!
@PuddinJr19933 жыл бұрын
Right. Now we only get 1 every couple months
@jimmydiresta6 жыл бұрын
Great lesson!!
@ThisOldTony6 жыл бұрын
thanks JD! hey.. you ever done any brazing?
@jaredj6314 жыл бұрын
This Old Tony Jimmy left you on read for two years 🤐 He’s not saying LOL
@tumeh74103 жыл бұрын
@@jaredj631 maybe hes been learning brazing so he can show TOT that he can do it. But I think the magic is in the sexy cream
@mrmudslide56766 жыл бұрын
You are solidly in the #1 spot in my que. I had one teacher, once, during my formative years, that was able to deliver useful information with high-quality humor. This burned the info into my head and I still remember that Masvingo is the capitol of Zimbabwe. I LOVE Diresta, AvE, Tips from a Shipwright, Abom79, SV Seeker, Clickspring, etc., but you are #1 in my (current) book. Thanks a ton.
@mrmudslide56766 жыл бұрын
I forgot "Hand Tool Rescue". But I am drinking my Friday cocktails. Sorry.
@markmuller23206 жыл бұрын
Pity your teacher's geography sucked... 😁
@markmuller23206 жыл бұрын
...and his English... apparently. Only Washington DC has a capitol... everywhere else has a capital. Yw.
@Bettinasisrg6 жыл бұрын
Not necessarily, in the country of Zimbabwe both the Province and Capital are Masvingo (province). So it's the capital of the province of the country? Confusing because there is just a town Masvingo as well, not Masvingo Province. OK I'm sleepy now
@memolei6 жыл бұрын
So great to see that I'm not the only one with the very same twisted favourites! :D
@dennisstephens77776 жыл бұрын
I really enjoy (and learn from) your videos. But as a metallurgist, I have a few comments. "Soft solders" include the 96Tin-4Silver replacement for various Tin-Lead alloys. These alloys lack sufficient shear strength for tooling applications. "Hard solders" are brazing alloys, defined by the American Welding Society defines as having liquidus (flow) temperatures over 840F. Silvaloy 450, Safety-Silv 45 and other BAg-5 alloys are 45Ag-30Cu-25Zn and flow at ~1330F, plenty hot enough to soften high speed steels. When building carbide tipped tools with large surface area or corner/slot constraint, consider one of the trimetal shim preforms available from Lucas-Milhaupt. Silver-copper-silver (1-2-1)composites manage thermal stresses better and avoid carbide cracking. Obviously, the filler material and flux are in place before the torch is lit. Also, joint clearance is important. For the BAg-5 alloy, 0.003" per side is optimal and provides highest joint strength.
@quartfeira2 жыл бұрын
Thank you! I'm really grateful, you don't find this type of informations just everywhere! 😊✌️
@atho9e6 жыл бұрын
I think ‘the ring’ refers to the ring of dirt left around a bathtub which marks the high tide.
@mattcy65916 жыл бұрын
atho9e that makes the most sense out of the other explanations I read. Highest ring due to water displacement. Superb observation sir.
@goldenhazeduster6 жыл бұрын
That's where I am with the joke as well.
@imagej006 жыл бұрын
I was going to say the same thing!
@rgi95096 жыл бұрын
You need to also take into account that Baths were universal and showers weren't a thing until fairly recent. Like 1950's, so the "ring" would have been far more common knowledge.
@chrisfrosty45406 жыл бұрын
In German brazing is „Hartlöten“ and the other is „weichlöten“ „Weichlöten“ goes to 450 „Hartlöten“ goes to 1200 „Schweißen“ is all over 1200 Measurement is in Celsius Good day together
@Misack86 жыл бұрын
Good ol german over engineering.
@zanpekosak23836 жыл бұрын
Exactly. Hard soldering,soft soldering and welding.
@TheDuckofDoom.6 жыл бұрын
This is 2018. Why do you archaic heathens refuse to use Kelvin? (this is humor if there is a translation problem)
@AdamHammel6 жыл бұрын
wolfedog99 Close only counts in horseshoes buddy.
@DavidRichfield6 жыл бұрын
> Good day together German confirmed! (Guten Tag zusammen) In English you don't use "zusammen" to refer to the people present. It's more normal to say "all" or "everybody".
@thebeststooge6 жыл бұрын
Tony needs a new camera that does progressive instead of interlace video.
@SlartiMarvinbartfast6 жыл бұрын
I was thinking the very same thing.
@ats19956 жыл бұрын
yeah, I have a hard time watching
@meatpixel2566 жыл бұрын
Haven't noticed before. Maybe a timeline setting gone wrong.
@Kaysler5 жыл бұрын
My favorite part is him taking the time to specifically explain to us that brazing is not welding and then proceeds to refer to it as welding several times. Our minds are funny that way. Great video.
@AdricM2 жыл бұрын
and then welds it with a tig at the end.
@spudpud-T676 жыл бұрын
I had a "Puffin Joke Book" when about 7 yrs old (43 yrs ago) and can only remember one joke from it to this day: I'd tell you about the shark infested custard, but you'd never swallow it.
@genelomas3325 жыл бұрын
Well, I'd tell you the funny story about the eel who fell in the bucket of motor oil, but I doubt you could handle it.
@twobob4 жыл бұрын
@@genelomas332 variation II: "grasp it".
@Joe30pack6 жыл бұрын
That step into sexy joke was pretty brazen.
@pinrestore6 жыл бұрын
I'm till trying to picture the Avon 79. Perhaps the 7 is just a sharpened 6. Speaking of tools...
@Ohm515 жыл бұрын
The set-up to which is forshadowed at 1:05, and again at aprox 1:45.
@iwtommo6 жыл бұрын
Jeeby creeby Ton the profanity has been off the charts in this and the last vid. You said BUM. Frankly, i'm appalled. What next, gentleman sausage in worktop clamping equipment?!
@markmuller23206 жыл бұрын
Not when it's being hand-cranked *cough
@kurtarmbrust6 жыл бұрын
iwtommo You have been watching too much AvE.
@TheDuckofDoom.6 жыл бұрын
Gotta keep that Richard in a bad habit.
@reprapmlp6 жыл бұрын
oxy(acetylene)moron
@jabalisearcot6 жыл бұрын
Was that Alex French Guy cooking??
@Arnthorg6 жыл бұрын
the YT algorithms just introduced me to him yesterday and now he pops up in a COMPLETELY unrelated channel(or is it?). The universe is out to get me
@brianbrians31576 жыл бұрын
Me too! Weird.
@mikedrop44216 жыл бұрын
#Spreaditlikebutter
@callumdoherty46816 жыл бұрын
Arnþór Gíslason no more are they unrelated :))
@markmooney47704 жыл бұрын
I guess that you haven't seen where Tony rebuilds Alex's Pasta machine
@jamesj29774 жыл бұрын
I work in band instrument repair. I fell down the rabbit hole of your channel because we do a lot of lathe work to make our own tools. Brass instruments are held together with solder, so we do a lot of that as well. My experience has mostly been with 94/6 and 96/4 tin/silver solder for what we call "soft" soldering. Something that we want to be able to take apart again some day. We tend to use the terms "hard soldering" "silver soldering" and "brazing" interchangeably, even though our soft solder is technically also a silver alloy. Silver soldering is for things we don't want to come apart again ever (broken parts or homemade tools, usually). It's interesting to learn more about soldering applications that I can bring to the shop. My friends and I love your content and humor. Keep it up! (:
@ROBRENZ6 жыл бұрын
Great video Tony as always! Mapp gas and a turbo torch would do the joints you did with no problem. anything bigger your right you need the oxy-acetylene. High speed steel brazes fine with safety-silv 56 which has a liquidus of 1205F which is in the realm of the red hardness range of high speed steel. The safety-silv 45 has a liquidus of 1370F so it would not be ideal. I only buy the 56 because it works better on just about everything. ATB, Robin
@andyboys56696 жыл бұрын
Reminds me of that movie with two guys walking up a mountain to destroy a ring. Brokeback mountain.
@TheGayestPersononYouTube6 жыл бұрын
I see what you did there
@blainekrueger6 жыл бұрын
BOO!
@bluecapone6 жыл бұрын
Jim Alley No, your thinking of hump crack mountain 😂
@WhereWhatHuh6 жыл бұрын
Okay, I have to make a confession: I have used Oxy-Acetylene to solder copper pipes. You have to be really gentle, though. I tried to show someone else how to do it -- he said he knew how to braze, so I assumed he could also solder. I looked away, and when I looked back the entire joint was glowing. He actually managed to fuse the copper joint together. Goes to show, don't assume that people know what you mean.
@jacobg51224 жыл бұрын
But did the joint hold water?
@tylerd.94576 жыл бұрын
Vise under 50 lbs of junk? You know you are suppose to keep that in the vise right?
@nickpapadopoulos55276 жыл бұрын
Just found your channel recently and I binged a whole lot of your videos, they are great! Are you planning to do a copper brazing video next ?
@Carmelldansen4eva26 жыл бұрын
But the flux tastes good.
@afbennett30386 жыл бұрын
U are not the conventional KZbin channel where I would skip the bits I don't care about but I care about everything in ur videos.
@tylerhensley23126 жыл бұрын
The longer the better!
@pinkponyofprey19656 жыл бұрын
That's what she said
@balthy81396 жыл бұрын
PinkPonyOfPrey freakin stole my punchline
@butre.6 жыл бұрын
length dont mean anything if you don't have the girth to back it up though
@Blueshirt386 жыл бұрын
It isn't about the size of the boat, it's all about the motion of the ocean. That's why our Navy only has really small ships... Oh wait...
@nicoslud6 жыл бұрын
The only channel where youtube's auto-gen subs actually subtitles the mill's sound as [Applause]!
@JuryDutySummons6 жыл бұрын
Hah yeah, I saw that on another video and I had to pause it from laughing too hard.
@shadowcard6923 Жыл бұрын
So coming back to this later and not sleep deprived, a good tip is to clamp the high speed steel into copper or aluminum blocks to help absorb the heat at the cutting edges which can be good if you really want to weld hot.
@censusgary6 жыл бұрын
Thank you for stopping to explain the difference between silver soldering and silver brazing. I had wondered about that.
@anicecoldbepis6 жыл бұрын
I like how Scott from Essential Craftsman put it. He will make the video however long it needs to be to effectively convey the information that he needs to convey. If the topic takes 2 minutes to convey, the video will be 2 minutes. If the topic takes 40 minutes to convey, the video will be 40 minutes
@glenralph51236 жыл бұрын
That poor cat! How many lives does it have left? Off the top of my head, I count 4???
@lodgecav4906 жыл бұрын
The first thing I look at when seeing one of your videos is the timeline to see how long it is....anything less than 20mins and I am ever so slightly disappointed, but nonetheless still very happy to see one of your productions! Great video Tony, although I am still wondering what 'soddering' is....(I am British..) Thank you!
@martinjones66946 жыл бұрын
It appears that in the American language, any use of the letter L after an O gets dropped.... I watch another youtube channel of some guy in new york fixing laptops, and the amount of soddering he does is amazing....
@anthonyfieldthetrollbuster99306 жыл бұрын
So we should call him Od Tony?
@CrashTestCoder6 жыл бұрын
Martin Jones As an American I probably wouldn’t notice if what you said is true, but I’m pretty sure it’s limited to the word solder
@martinjones66946 жыл бұрын
its probably less common in some regions.... but tool is often pronounced as two,,,,, its got to the point I listen for it !!!
@davescowie6 жыл бұрын
Never mind sawdering, our great American cousins have started to pisspronounce Height incorrectly, listen closely and a good number say HEITH, drives me mad.
@CLPRPSD3 жыл бұрын
Reminds me of the bathtub joke on Sesame Street: Bert: “Ernie, why do you call the bathtub Rosie?” Ernie: “Well Bert, every time I have a bath, I leave a ring around Rosie” It’s jokes like these that left me isolated and alone as a child.
@danksage98692 жыл бұрын
felt that, honestly plus the joke is a1
@evgenitantikov58653 жыл бұрын
Extremely professional, always high quality content and pure gold sense of humor.
@mullesmagasin52446 жыл бұрын
I really enjoye the longer video's keep the good work up 🤘
@jenstornqvist45676 жыл бұрын
Don't you ever dare apologizing for chit-chatting and long videos. I would never complain if the videos had more chit-chatting and were longer. They're good now too, matter fact, everything you upload is good. Keep it up!
@Dynamic_Viking6 жыл бұрын
this made my friday evening! Cheers from Iceland!
@davestrong64726 жыл бұрын
Sigurbjörn Gauti Rafnsson Bjork for president
@litleElmo5 жыл бұрын
The punch line to your haunting joke is the first guy in the tub takes the first bath leaving a soap ring in the tub for tbe rest that follows.
@randy49036 жыл бұрын
According to the AWS, soldering uses a filler material that melts below 450° C; anything with a higher melting point is considered brazing (short of welding, of course).
@EnUsUserScreenname6 жыл бұрын
Three ramen-addicted ring-leaders walk into a bar...
@victorsavinoff2796 жыл бұрын
16:20 that blue stuff is some cobalt compound
@jusb10666 жыл бұрын
what does it taste like though? minty?
@jeromedumalin75556 жыл бұрын
Yes, the tungsten carbide is crystals in a cobalt matrix, a bit like carbon in steel. The cobalt forms oxides on the surface, and these are dissolved into the molten flux, forming a bluish glas.The green colour on the stainless shaft may be the nickel, iron and/ or chromium oxides also dissolving into the flux.
@fillg6 жыл бұрын
Also the flux he used said it was boron modified and boron can give a blue color as well.
@krawutzimon6 жыл бұрын
yay, i'm getting flashbacks to inorganic chemistry labs!
@TheDuckofDoom.6 жыл бұрын
Small correction, carbon steel isn't carbon crystals in an iron matrix. The carbon is fully dissolved and thus part of the iron crystal lattice. Over 0.8% carbon(the eutectoid point) some of the carbon will combine with iron to create iron-carbide aka cementite which is separate particles in a steel matrix. In alloy steels tungstain, vanadium, and chromium are all strongly carbide forming alloys. (and why Cr must be over about 12% dependent on carbon content, before enough free metallic Cr is available to make stainless steel ) The border between steel and "iron" [in the blacksmith material sense] is that in steel all of the carbon can dissolve into the crystal structure (at the appropriate temperature) when allowed to reach chemical equilibrium, this has a maximum of about 2.0% carbon. (a few exotic alloys with lots of carbide formers can go a bit higher) Cast iron has about 4-5% carbon(the eutectic point) and so forms graphite particles that make grey cast iron grey when fractured and easy to machine being self lubricating and nice-chip forming This high carbon makes tons of cementite in "white" or "chilled" cast iron making it extremely abrasion resistant. (Molds are cooled and made with heat conductive materials to quench straight from the molten stage, this is not allowing chemical equilibrium.) White cast can formed on just one portion of a cast as well kind of like a case hardening, or it can then be heat treated further to convert the cabides back to carbon and make ductile or nodular cast iron. (I forget which one is made from white as I get the two mixed up. Nodular for sure has rounded nodules of graphite making it a bit more ductile than grey.)
@littlebacchus2166 жыл бұрын
“Attention is the rarest and purest form of generosity.” -Simone Weil And no matter how long the video you will always have our full attention.
@YoFabGuy6 жыл бұрын
can I just say. I'm going to school for mechanical engineering and I'm one year from graduation. Before this video I had no idea what the application of braising was. Thank you for putting the time in to teach guys like me, It has made me a way better designer and all around engineer. love this channel!
@bashkillszombies4 жыл бұрын
Is it because dirty people leave dirty rings around their bathtub when they bathe? In the 20's people were probably grubbier than now, so dirt rings may have been normal?
@TheDuckofDoom.6 жыл бұрын
Brazing, contrary to old timer assumptions, is not mechanical there actually is chemical fusion although the base parts aren't melted the atoms near the surface do diffuse and alloy. I think the term brazing actually [originally] referred specifically to hard soldering with brass and bronze, current common use is just a synonym for all hard or high temp soldering. Metallurgically speaking fusion welding also doesn't need more than an atom or two of penetration to achieve full strength, the hitch is in practically accomplishing that such precise fusion in a real world joint without significant flaws.
@bostedtap83996 жыл бұрын
Excellent discription, yes, brazing temperatures does alloy with parent material, soldering does not. I am not sure in the regard to the sintered carbide, does it alloy, or does it penetrate the sintered structure. May I ask your opinion on this. Regards John.
@finnsailing696 жыл бұрын
enough with the machining! where´s the shop cat? i thought this would be a cat video!
@Stormbolter6 жыл бұрын
Be aware that sometimes in amazon you find counterfeit solder that has much less silver than expected.
@Vypren4 жыл бұрын
Carbide-tipped Nerf dart 😂 God I love this dude ❤️
@ZURAD2 жыл бұрын
Tony, I gotta know more about your camera setup. Your macro shots and focus pulls are really the best.
@Pappaoh6 жыл бұрын
Tony, I love your vids, but this has got to be the best vid I have seen on silver brazing. You completely demystified the flux and filler material. Thanks
@azureskys6 жыл бұрын
Your videos are always a highlight of my day/week/month regardless of length! Just want to say thanks for what you put in to them because I love every second of them. Always brightens the day.
@JimmysTractor6 жыл бұрын
This Old Tony one of 2 things is true. I am an awesome glute smoocher or you are not only the best producer of the highest quality video production available anywhere, but the most gracious, humble, down to earth youtubers I have ever come across. I scatter my $.02 all over the place and you are the only one of the really famous youtubers that comments back! If you would do a video on electroplating, I will send you a 7gr 14kt gold ring with 12 .05kt g/h vs1 diamonds that you can use to make a play button worthy of displaying on your shop wall. If you have the time to show us how to make your play button worthy of the best, most entertaining youtuber(everyone except your humble self knows I'm talking about you) who ever posted a video, I would be honored to have the slightest part it making your 250k subscriber play button worthy of your shop wall. What could be better than a gold plated play button with three 2.3mm diamonds in each corner (maybe 18kt, with 144 1kt diamonds as a border?). Anyway, the preceding is 100% factual in everyway and if you think gold elecroplating and setting diamonds is something you would enjoy, I would be honored to contribute! You'll be at 250k by next Saturday, so let me know so I can get it to you before the button arrives. Maybe in 3 months, a richer fan can send a 500gr 24kt ingot and a black velvet sack of diamond to make a proper 1M play button? Seriously, if you'll fix your button, I'll send the ring.
@thegardenofeatin59654 жыл бұрын
Aircraft mechanic here. I don't think I've ever encountered brazing in aircraft structure. AFAIK, old tube and rag ships like the Cub are welded chro-moly. Aluminum semi-monocoque hulls are made from 2024-T3, so welding or brazing would kill the heat treatment of the metal (and the crew and passengers), so those structures are riveted. Aircraft are increasingly made of composite materials, which behave even worse than aluminum when they encounter a torch. Brazing happens every now and again in the power plant, some hydraulic fittings get silver soldered. BTW, though they do teach a couple weeks of welding during mechanic school, it's mostly to impress on A&Ps that you should NEVER under ANY circumstances take a welding torch to an aircraft, you get a certified welder to do it. From what they taught me I think I could repair a broken shovel or wheelbarrow with an oxy-acetylene torch, but I wouldn't trust myself to do any welding on an aircraft.
@GreybeardMakes4 жыл бұрын
Did you really just torch all the cobalt out of that bit of tooling? Most impressive :D
@danielwiegert60676 жыл бұрын
Video appears interlaced :(
@gabest46 жыл бұрын
Just get a 1080i CRT, it will look great!
@operator88866 жыл бұрын
What is interlaced?
@matthewlennox24886 жыл бұрын
Who's keeping you locked in your shop forcing you to churn out videos so fast? I want to send them a thank you card.
@francisbarnett6 жыл бұрын
Bath ring, we call it the tide mark in our house.
@HorthornNZ6 жыл бұрын
You need to be old school to get this one, you are correct, it was a nuns joke book ;-) it is talking about the bath ring left by unbathed people taking a bath (big issue in the old days) , leader, first in the bath sigh!@ do I need to explain this.
@earlebird42628 ай бұрын
Ye olde time soap left a ring of soap scum at the high water mark in the tub. Ring around the bath tub and ring around the collar "humor" were still unnecessarily common in the early eighties. Soap has been improved, and Americans tend to prefer showers nowadays, and that joke wasn't funny at all.
@sixspeeddeath3 жыл бұрын
To start, I've brazed 1 thing in my life, at a tech school, and I wasn't very good at it. I do solder electronics as part of a hoby, and I was wondering if using a clamp as a heat sink on high speed steel would allow more wiggle room when welding to prevent annealing it? I know that when I'm preventing an IC from melting, I can use an alligator clip in between the solder work, and the chip to prevent heat migrating into the IC, but I'm not sure if it works the same for welding.
@ChunkyMonkaayyy6 жыл бұрын
Coincidentally, for me anyways, I just read a few days ago that the “mapp” gas in little yellow tanks isn’t true mapp gas of olden days but just a marketing name now. It’s temp is similar to propane. Environmental laws outlawed the good stuff.
@williamwakely13986 жыл бұрын
Technically, it wasn't environmental laws. The components of true MAPP gas were originally essentially waste products, but then became valuable as feedstock for the plastics industry. Businesses being out there to make a profit, they stopped selling MAPP, and sold the gas to the plastics industry instead for a higher profit.
@HillbillyRednecking6 жыл бұрын
Hugh Jafro old news, MAPP hasn't been made in North America for years now, funny how they take propane add a couple additives and make you think it's real MAPP
@SludgeFuZZ6 жыл бұрын
If it's not methylacetylene-propadiene propane then it's not mapp.
@Koribashi6 жыл бұрын
propylene gas (usually with
@ksb21126 жыл бұрын
Yep. You can pay 3x the price to get another 100F.
@gamerpaddy6 жыл бұрын
since when is he filming in interlaced
@W.O.P.R6 жыл бұрын
Had to look up "impetus" 7:11 ... sometimes I learn more than just machining, and I've never touched a lathe.
@erikvdo Жыл бұрын
Someone bathing, back in those days, might have been dirty enough to leave a ring on the tub once it was emptied? Or maybe the soap they used would have left a ring? I dunno. What do you want from a guy that watches 4 year old KZbin videos? Clearly, I have no life.
@brocojack2 жыл бұрын
Ringleader: The filth that comes off a person while bathing floats on the water line in the tub. It sticks to the wall of the tub forming a visible layer of crud where the water line is. When the water recedes from draining the tub a "ring" of filth is left behind. This is called a ring. The person in the joke is the 1st person in the tub, he is leading the bath, so to speak. A leader. A ring leader. Truly its an old joke, as no one born in a time where books are curiosities would assume anything except perverse sodomy, no Millennial would understand innocence or difficulty in acquiring hygiene. Anyway, long story short, the layer of dirt in the tub after a bath is called a ring.
@caboseisstupid4 жыл бұрын
Even if you made two hour videos every day, I'd happily watch every minute of your content. Your videos are absolutely awesome!
@simperous43086 жыл бұрын
the funniest thing about that joke has just been reading all the comments...!
@samc58986 жыл бұрын
Long videos are awesome. I love long youtube videos from any/all of my favorite creators because it means that there's a lot of content that they put time and knowledge into and I learn so much from the longer videos. It also works out when I can sit down with one video on my lunch break, rather than flipping through four or five, to fill the time.
@Ge-Fat6 жыл бұрын
why have i not found this chan before? FFS KZbin...
@mojoemurphy5 жыл бұрын
Ringleader refers to a ring around the bath tub, the soap scum, dirty, gross ring that shows up in old tubs that aren't clean. The first person in the tub is the person who established where the ring was going to be and is going to start the creation of the Ring. Therefore they are the ring leader
@markmooney47704 жыл бұрын
Hey Tony, you mentioned Black flux and White flux. I'm looking for "I don't give a Flux". Do you know where I could find it? Thanks
@HeavySpiral6 жыл бұрын
Is it 1080i or is the the codec? Why does the video look weird (weird lines as if I am watching TV)?
@AttilaAsztalos6 жыл бұрын
Yup, it's interlaced footage (interwoven half-frames like old TV) and when anything moves fast it really, REALLY shows.
@beadowarrior6 жыл бұрын
This channel has got to be one of - if not THE - best, most educational and entertaining channel around. Thank you for your effort.
@ThisOldTony6 жыл бұрын
Thanks! and thanks for watching Philip. I appreciate it.
@PaulSteMarie6 жыл бұрын
That Oatley stuff isn't silver solder. It's lead-free soft solder, mostly tin with a frisson of Ag to lower the melting point. Your silver blazing wire is silver solder, exactly what a jeweler would use.
@JamesChurchill6 жыл бұрын
It's absolutely still silver solder, just not the silver solder you're thinking of. There's a world of difference between what the jewellery, plumbing, and electronics industries consider "silver solder" to be. None of them would want to use the stuff from one of the others.
@PaulSteMarie6 жыл бұрын
James Churchill No, there's no application where someone could specify silver solder where that Oately stuff would be acceptable. HVAC silver solder is at least 15% Ag, higher for joining dissimilar metals. That Oately stuff is lead-free soft solder for potable water connections. Usual composition is about 97-98% tin and 2% silver.
@JamesChurchill6 жыл бұрын
I said nothing about where they were applicable, I commented *only* on the industry-specific nature of the nomenclature. So I don't know what you're trying to argue against.
@geppettocollodi89454 жыл бұрын
You can braze HSS with a Propane or MAPP torch. Heat the large part so it gets to brazing temperature before the small bit.
@johncoops68972 жыл бұрын
You might do it with MAPP, but you'd be waiting FOREVER to braze using Propane. Unless you use silver solder, rather than brazing sticks.
@Romuls7534 жыл бұрын
Didn't know you had a lot of Marines watching your channel, one would think that it goes without saying that you don't eat the flux
@headsean6 жыл бұрын
alex!
@XBlackRoseRacingX6 жыл бұрын
So Tony... exactly how many cats have you gone through ?
@ThisOldTony6 жыл бұрын
we don't like to talk about that here.
@ShroomheadOne6 жыл бұрын
3 men in a bath tub. *RING LEADER* . I don't think this is a joke for children.
@MrUbiquitousTech6 жыл бұрын
Sure it is, it's just about dirty water. A dumb joke is all it is.
@naughtyneill65075 жыл бұрын
Haven't any skills. No tools to speak of. No clue what you're doing but Cannot stop watching your videos! Your banter is excellent! Play on Tony. Thank you. Oh Ring in Aussie is arse. Does that help?
@VailsMom5 жыл бұрын
Appreciate the cameo from Alex French Guy Cooking. He sent me here. *gasp* I would never have found you without Alex. We have so much to thank him for...
@charlesparmele6 жыл бұрын
The first book I ever checked out was a book about Space, one of those big ones. I have been a Science nut ever since.
@jamesmorgan68314 жыл бұрын
1:45 "As much as I might complain, hand-cranking has never let me down. (clears throat)"
@MarkWarbington6 жыл бұрын
Interlaced? I think you're trying too hard to emulate Mr. Pete. :)
@MrUbiquitousTech6 жыл бұрын
Both makers do a great job on their videos. Quit looking for things to whine about. ;)
@SteveBrecht6 жыл бұрын
I am late to this one but wanted to say that this was one of the most straight forward explanations of what Flux does when soldering I have come across. Thanks!