Stress, Strain & DIY Tool Holder

100k subs! Who'da thought?!
Building an insert tool for my flycutter gets me into milling, finishing and hardening D3 tool steel, including a spark test, with a chat about hardness, rigidity, stress, and strain. All over the place.
Be sure to check out:
ABOM79 / abom79
OxToolCo / oxtoolco
OutsideScrewball / outsidescrewball
Basement Shop Guy / basementshopguy
NYCCNC / saunixcomp
Stefan Gotteswinter / syyl
Laura Kampf / @laurakampf
Happy Boy Theme by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommon...)
Source: incompetech.com...
Artist: incompetech.com/

[@WojciechP915]

It just occurred to me that this channel is nothing but a bunch of well-filmed dad jokes.

[@trentw26]

Holy crap. I feel like I just took the blue pill!

[@trentw26]

+Trent Wainwright I should clarify, I'm referring to the matrix... Not the pill used to treat erectile dysfunction...

[@alexsharp940]

Trent Wainwright I think you mean the red pill! The blue pill had Neo wake up and think all of it was a dream.

[@tormachinc]

This "just" occurred to you?

[@trentw26]

+Alex Sharp well damn! But now that doesn't work with my joke...lol

[@Xenronnify]

Been watching through the ol' catalogue again, for memories sake. Can you believe 1 million subs has become real? That said, this might be the finest example I've ever found of the exact type of dad humor I resonate with, and it's why I loved the channel so much the minute I found it (from Alex French Guy Cooking's channel, when you rebuilt his pasta press)

[@leslieaustin151]

Oh Good Grief! I’ve just re-watched this, and seen the “subscribe” appeal. This channel is just pure genius! So many laughs to see and uncover. Thanks Tony. Les

[@jbsoul4575]

Watching this guy is a good way to start a Saturday morning.

[@willierants5880]

I had forgotten what a work of art this video IS so I'm so glad Martin reminded me of it. So here I am watching it again for the 12th time and laughing may proverbial ass off. Thanks TOT.

[@gm3087]

always asking myself: who da fuck is that guy that gives that one thumb down for such nice vids? Tony's ex-girlfriend? anyway: congratulations Mr. Tony, hope you make many more vids in the years to come!

[@arnljotseem8794]

Didn't you see the last part of the video. Its Stefan of course :-)

[@KRAVATTNET]

Trolls, they are everywhere!

[@SpaceBuckaroo]

So that is you. The first time I watched this video, I thought you had someone stand in for you.

[@GeneralHowToTutorials]

for real!

[@clayz1]

Backwards is something I would do. My compliments on this tool. Anyone can make a fly cutter, but that tool is beyond for sure.

[@simonhopkins3867]

1M views and 1M subs congratulations you worked way too hard for them 😉

[@mrembeh1848]

Now you actually do have 1 million subscribers 🥰🥰🥰

[@charltonwang]

Ha ha..."What are you doing?" Nice one!

[@JohnHessGA]

I've never done metal working - perhaps some day. But I'm mainly here for the jokes.... :) Thanks

[@jasons5654]

I'm by no means a hobby machinist or any other kind , but I love your videos very interesting and you crack me up lol

[@Rob_65]

I love the detail at 5:20 😁

[@Ender.wigginn]

Your jokes aren't bad 😂 I'm relatively new, maybe a year now, but I love your content. Glad you escaped the max security stockades

[@MiniLuv-1984]

I was waiting to see your hands to figure out who the joker was on the channel. Hooray for 100k subscribers times 7.42

[@jordanc.m.6735]

Some of the best jokes of your career in this video

[@Tome13Eclipse]

So this old Tony does have a face, you really can never tell I feel like i shouldn't have watched this video

[@chuckphilpot7756]

This may be a stupid question, but isn't the through hole for the insert supposed to be slightly too far back so that the taper of the screw pinches the insert to the back of the pocket? Maybe I missed something but this didn't seem like it happened. If it did not, you will lose a ton of rigidity in the carbide insert. Bad news bears.

[@gatorwing6231]

Nose a bit red. Cold or celebrating 100K ❓💥🤣

[@stanervin6108]

Break me off a piece of that Kit Kat Bar

[@DaSlotho]

wow that face...so cute lolz...seriously i had a pic of a Doc Brown type of crazy hair doo mad as a hatter sorta guy...but yea nah aye what we get is a normal person who makes some great content... yep all good n my book

[@PracticalEngineeringChannel]

I knew he was handsome!

[@ThisOldTony]

all men are beautiful.

[@FormerlyOn2Wheels]

i was kinda worried to be honest and also, thanks for herding me to his channel after your welding for nerds video

[@burtreynolds3143]

You dudes all know each other ! All my KZbin buddies are also buddies !

[@RogerBarraud]

@@ThisOldTony Especially us baldies eh :-)

[@sharpeguns1]

No wonder your broke, another paid subscriber. PS were is the check you promised me 🔪😰😱

[@Clickspring]

Oh man, I love your videos...

[@phooesnax]

+1

[@1320crusier]

Anybody else read that in Chris' voice? X)

[@TheQuantumFreak]

And we love yours too!!

[@skerky10mm]

ha! one of my favorite KZbin commenting on another one of my favorites lol

[@ThisOldTony]

Thanks Chris! right back atcha.

[@bradlotsberg6930]

OMG as a huge fan of this channel I can't believe I never saw this video until just now (Jan 2020). Finally I see the face attached to the voice! I may be traumatized for life LOL. You know how you get a mental image of someone from just hearing their voice, especially if you've heard it for quite some time but never seen them? Yeah ... TOTALLY DIFFERENT than I expected. Not necessarily in a bad way but jarringly different enough from the vague mental picture I'd developed that now there is some kind of weird "does not compute" thing going on in my head when I watch the rest of the video. Oh well, I'll eventually get over it - perhaps watching more ToT is good therapy ..... On a serious note Mr. Old Tony, I honestly do tremendously enjoy every video. Informative, funny, educational, and incredibly high production quality. It really is a joy to watch every one so thank you for all the effort you put in to making the videos.

[@michaelm.1244]

Same here... Long time Tony Fan... I was cooking the Lunch, while the videos were showing randomly. Suddenly I saw a face! I dropped the knife, my chin drops open and I'm standing here in awe :D Please dont tell me there is a similar AVE-Vigeo somewhere!? MINDBLOWN!

[@shippo72]

What are you talking about, his hands looks exactly the same as in his videos.

[@thespiritof76..]

Michael M I’m not sure where but I saw a thumbnail pic of Ave the other day... maybe it was Ave himself doing another channel? Biggest set of chompers I ever saw in my life...

[@danprice6270]

Same here I pictured him being much older 😂

[@taylor2105]

So funny what KZbin shows us. I expected older for sure, and maybe a wizard hat or something to explain why he's so good at what he does.

[@johncamilleri1372]

Fast forward 4 years and youre actually at 1 million subs. Congrats man. Love the channel, keep up the brilliant work

[@mushin111]

Can't believe this was so long ago.

[@censusgary]

This Old Tony, you made yourself a face! I want to see the video of THAT build.

[@Tricknologyinc]

Don't procrastinate. Pornhub's only going to be free for a while... :P

[@russellsullivan8947]

Gary, you may have to contact Tony's parents for that video.

[@Kevin-jb2pv]

Pink Flamingos came out decades ago.

[@johnedward7538]

😳

[@StefanGotteswinter]

Ha! Now we know that you look just like AvE ;)

[@shaquillehewitt2295]

Stefan Gotteswinter please

[@steveskouson9620]

Yeah, he sounds like Colonel John (Hannibal) Smith! steve

[@StanislavG.]

Wanna hear a fun story? I live in Quebec, and my cousin Dima worked with AvE in the tech support department of Bosch, before AvE left about 3 years ago. And i was begging him for a long time to somehow set up a meeting with Him (the one whose name cannot be pronounced correctly), and my cousin was like -No man, i can't, he made me swear on my mother. So, about a week ago, i think it was friday, my cousin Dima was fired from the tech support department of Bosch. Apparently, as a side gig, he was illegally hacking these stupid electric scooters to be able to reach 35km/h. Long story short, he made me swear not to tell his mother that he was fired from his job, and in return he would set up a meeting. Besides, aunt Luba is an old lady, she don't need this kind of negativity in her life right now. Anyway, Dima told me that when they worked together, every day after work, AvE visited the Old central bus station. And i was like -Yeah, cool, i know the place. To those not familiar with the place, the "Old central bus station" is like this ugly concrete building, what they use to build in the 70's. The ones with the permanent aroma of stale pee. As they age, these building tend to attract the kind of vendors you generally won't find in your local family friendly strip mall. (Just as a side note, i don't judge and absolutely don't mind businesses that offer hydraulic butt toys and clamps, nor extreme vegetarian sex massages. Also, i very much like the meat and onion pirogi Vova is selling at the corner) Where was i... Ah yeah, so, i decided to give it a try, so me and Dima took a couple of beers and went to the bus station. We wandered around for awhile. The place was kindda creepy. I had no idea what we were looking for. I sat down to roll a cigarette on a bench in front of "The Rubber Empire". Dima left standing and was nervously looking around as i was smoking the weirdly shaped cigarette i managed to produce. The flicking neon sign stated that the rubber guys had "All the rubber you can rub" and "Open 24/7". A well built man with lush facial hair, in an elegant suit and a red turban was standing near the black door that was apparently the entrance to the place. Suddenly i felt Dima tapping on my shoulder. He whispered -That's him. The guy with the paper bag... I turned around. -Him? Are you sure? I was shocked to say the least. I always imagined AvE (real name's Colin by the way) looking like.. you know, like your average canadian asshole, i guess. But against all my expectations, in front of me stood a short bald man, wearing an expensive, three piece, pin-stripe suit. He had glasses with with thick lenses that made his eyes look small and spaced apart. He was holding a brown paper bag in his hand and was heading towards the Empire. I stood up, flicked the half finished cigarette, and advanced towards him to introduce myself. I called -Ave! He spooked and turned around. I reached my hand and said -Ave, it's a great... He stepped back and before i could finish my sentence he asked -What's your name, boy? He sniffed his nose and touched his left nostril with his thumb a couple of times. I said -Hey Ave! I'm Stas, it's an honor... -Keep your dick in a vise! - he interrupted me. He looked annoyed. -What do you say about my empire of dirt, bud? - he pointed towards the Rubber Empire. -We haven't been... - i tried answering his question, but he interrupted me again... -That's skookum! - He blurted -Now, fuck off. He turned away and shouted -Farouk, come take this from me. The man with the turban approached us. -Please call Rudolf, tell him to prepare the room - said AvE to Farouk and gave him the paper bag. He turned away and started walking towards the black door of The Empire. -I love your channel, man! - i said to his back. -Farouk, take care of this please - he said without turning his head and made a waving hand gesture. -I think it would be better for all of us if both of you get the fuck out of here before i break your shit - Calmly said Farouk. -We're sorry, sir - said Dima. He then turned to me and said -Lets get the fuck out of here, before we'd have to use our free medical care. As we started walking, i heard him shout -Farouk, time! The entire experience left a bad taste in my mouth, and i really had to take this off my chest. I'm thinking about unsubscribing.

[@Frankie3sticks]

@@StanislavG. What a great story!

[@maxk4324]

@@StanislavG. I get that it was not what you expected, but put yourself in his shoes. Did you ever think that maybe a guy who never shows his face in his videos, rarely ever puts personal details in his videos, has never (to my knowledge) said his real name in his videos, and gives little to no indication of where he specifically lives in his videos might be trying very hard to avoid the exact situation you put him in? To him your just some random internet stranger, possibly even some dangerous lunatic (not saying you are but how the hell would he know that). Now you have not only put him in an awkward situation by ambushing him off the street, but now you've shared details with the whole world that he clearly didn't wish to share and in so doing violated his privacy. Did you even think about any of this before posting your comment? That story wasn't funny. It was petty and inconsiderate.

[@Abom79]

Great job on that fly cutter Tony! The whole gang enjoyed giving you the tips needed to machine it.

[@ThisOldTony]

Thanks Adam.. couldn't have done it without you guys.. though, after you guys left, I couldn't find the cutter anywhere. coincidence?

[@Abom79]

Might check Stefan's lunch box

[@TowardTheUnknown3]

:))

[@leeterthanyou]

@@Abom79 D3 chips > potato chips

[@xmachine7003]

@@ThisOldTony not at all😂😂

[@altuspienaar7679]

Soooo its about 2 and a half years down the line and you added another half a million subscribers to your channel. That's really something. And yes, practically you did not add them yourself....but really, you did add them. Your channel must be the most creative and well executed information or DIY channel on the web today. Congrats on a fantastic job and looking forward to seeing more.

[@CraigsWorkshop]

And here we are at 1M subs :) Still awesome as ever. Good to see him back after the time off.

[@shawngoldsberry747]

If this guy is a middle school/high school science teacher that school would produce an above average number of students who become engineers.

[@shotgunsam23]

I would pay money to be in that class

[@CalebBohanon]

True. But there's not enough room on the wall for us all to sit at that angle

[@hoodio]

and experts in glorious dad jokes

[@laurakampf]

I will try to find the guard and use it...i promise...i try to promise...we will see :) thanks for the shout out!

[@oldmanpatterson79]

Don't conform, Laura! We can't let Tony win.

[@BillyTpower]

please do, we can't bare to have your creative hands injured

[@Dadams206]

If you need motivation, Google 'angle grinder wound'. :)

[@ThisOldTony]

hah.. thanks for watching Laura! PS don't listen to David Adams -- you can't unsee that stuff. ;)

[@Mind_Idiot]

angle grinder wound? Now's not the time for porno.

[@dismalfist]

2020: Actually we're not miles away from the genuine 1M. A couple more cat videos should do it. Hint hint hint.

[@noahhastings6145]

I'd watch a video of ToT machining a cat

[@UncleKennysPlace]

95.1% of the way! Maybe I'll write a SubscriberBot to help out.

[@MrVein5.0]

its close!

[@ndupontnet]

@@UncleKennysPlace Bots would be detrimental to the engagement, and the channel.

[@RdV-]

About 24k to go until the million!

[@CactusforceX]

I just found this video, and had to scroll the screen down so I could only see your hands. I felt uncomfortable otherwise.

[@WeldNotes]

As both a college professor and a cartoon character, I feel I can speak with some authority on this: any video that can make me think critically about the stress-strain diagram and make coffee come out of my nose is A-ok.

[@dathaniel9403]

Next up: determining the ballistic trajectory of nose coffee. Given an initial velocity of v_0=5m/s, an initial height h_0=1.5m, and a launch angle theta=55 degrees wrt the horizontal, determine the maximum height, maximum range when h=0m, and total flight time of the nose coffee. Ignore air resistance and assume that the coffee is a spherical cow with radius r=1cm.

[@amielrumbaua8387]

Guess who's a bee's leg close to a million subs? This handsome machinist right here

[@FailedRorschachTest]

So, for reference, if anyone wants to heat treat D3, the process shown is just fine. It's a good idea to hold it at temperature for a couple minutes, or as long as you can stand, whichever comes first. 1750F (954C) is about when it starts to be more orange than red, a bit cooler is fine. The perfect tempering temp is 400F, for which a kitchen oven is perfect. You'll get about 61 HRC and avoid re-embrittlement which means it'll be very tough, ~25 ft-lbs Izod. Source: ThermoFusion Inc. - Hayward, CA

[@jimmydiresta]

Hahahah awesome

[@troyam6607]

You got one of those planes Jimmy? haha

[@ThisOldTony]

thanks buddy!

[@creynolds65cr]

you gotta be doing something right

[@LedSatriani]

Definitely wasn't expecting a face reveal! Now we need to get AvE to do one. I'm just a creep who really wants to know what ol' Uncle Bumblefuck looks like.

[@eddiebernays514]

SupaKoopa I never want to see uncle bumblefucks face!

[@wantu2much]

i don't think Uncle Bumblefuck shows his face because of his day job. I don't think he wants to be ousted of his clipboard job.

[@MetatronicModsLLC]

Didn't he do one briefly in a video? Maybe just the back/top of his head? Red hair, a little on the chunky side, but not fat?

[@sl1200mk02]

Metatronic Mods he's got a great personality

[@themrb007]

I think he showed himself in the old "Battle -shots" vidjay-o but he took it down, and re edited it.

[@ferguson20diesel49]

Wait wait wait is this actually him, damn this in not what my brain pictured

[@nostamine2567]

:))

[@geraldgepes]

Holy shit, Tony has a face!

[@geraldgepes]

Wait, where's his third arm?

[@giovannirizzi516]

I'm conflicted now. Shall I watch the video or keep the mystery?

[@RexusKing]

Watch the video blindfolded

[@Sabbatheist]

Rexus King I'd just been picturing Ray Romano all this time...

[@KarlBunker]

And he looks exactly like I didn't picture him!

[@cylosgarage]

Words can not describe how good your videos are. The perfect mix of wit and knowledge yields an absolute gem of a KZbin channel. Never stop

[@ThisOldTony]

Thank you Cylo!

[@TheodenEdnewDoesDnD]

5:33 the bolt head says subscribe

[@lewisheard1882]

Project Dandom Well spotted!!

[@wantu2much]

Nice catch, i didn't see it, but usualy do when it happens.

[@GestapoOfficer]

Project Dandom damn man you blow my mind

[@MoisesQuirozT]

Damn! Subliminal messages

[@BikingVikingHH]

There is one in every video

[@Xankar1]

I love that you do have to have some knowlege on so many things to get all his jokes. Like exactly how goddamn absurd it is to hand plane a piece of steel.

[@akisaarinen2872]

And now it is no longer joke. 1 million subs!

[@iShonKo]

The best machinist/metalworking/funny/Tony KZbin channel.

[@lorenzo42p]

time travel and magic

[@3Triskellion3]

i refuse to beleive that's tony, it must be an actor

[@neppoxeno]

agree

[@CB0T]

Old Tomy looks young. O.o Or i get old fast. >.

[@roelwijngaarden7970]

This is a stand-in stuntman.

[@miles11we]

3Triskellion3 i actually was watching one of his old videos yesterday of him handscraping a straight edge, he showed his face for a second in that, same dude

[@necrothescistt8164]

0:30 he was correct, he just got confused in his time traveling.

[@UncleKennysPlace]

Funny, I came back to this to remind me of what ToT looked like, and his joke at the beginning ... ain't a joke anymore. Hope to see you back when enough healing happens.

[@ROBRENZ]

Congratulations on 100k Tony! You don't look anything like your voice. Great video as always. ATB, Robin

[@ThisOldTony]

Thanks Rob! And what does my voice look like? Just curious. :)

[@ROBRENZ]

You know how you form this vague non descript ghostly mental image of the voice you hear often but have never seen the face. I would know it if I saw it but cant describe it. BTW I notice we have similar hair style ;) ATB, Robin

[@Elbert_Heather]

I dare say, you looked in my minds' eye like a mottled silver, gray pedagogue. Dismissive to all but the most exemplary of students and yet only appreciative of those whom understood your humor. Now that you have been unmasked your voice (as mine FWIW) does not seem to fit your body. You are nonetheless an auteur. Good work,

[@AMAINE207]

It's funny, because I imagined you to look pretty much exactly like this.

[@DzDzDzzzz146]

you'll always look as gandalf for me

[@Wintergatan]

YEEES!!! 2:08 thank you!

[@boomblooka]

What's at 2:08?

[@ThisOldTony]

Thanks Winter! ;)

[@chloehennessey6813]

OMG I’m gonna die 😮

[@Spirit532]

"Jump-cutting your stock" made me laugh out loud. I'm going to shamelessly steal that for one of my videos.

[@checksum00]

I watched this video with a non-mechanical inclinded friend (he sells website so... yeah...) and I had to explain that it was not real everytime he went "whoaaaaaa dude....". I feel like Tony's prank are just "real" enough...

[@henryyang478]

lol that clickspring ref

[@3DxPOD]

I don't understand enough about what he's doing to know when he's messing with me.

[@minerharry]

We’re still almost there!

[@SkullyWoodMetal]

Awesome video, congrats on reaching 100K. Just to let you know, I sold my band saw, sawzall and my Milwaukee metal cutting circular saw and bought 2 cases of WD-40 awesome tip!! Thanks!!

[@berendlucasvanderweide]

Laughed hard about the pimped out jewelry. Love your channel from the first hour, it's getting incremental better (don't know how to convert that to inches). Not saying you did a lousy job at first, but you surprise every time. Great, great work.

[@ThisOldTony]

Thanks!

[@JgHaverty]

Hes gotten at least 3 inches better

[@Cellomaster1234]

Congratulations on getting to that 1M Tony!

[@mcremona]

Congrats on the milestone!

[@ThisOldTony]

Thanks Matthew!

[@Laurent.pierrard]

Stress/ strain comparison of “me versus wife” really made my day 😂

[@amargnwalkr]

Wow, not a lot of KZbinrs (especially makers) get me laughing so hard... I mean, that face! Congrats on 100k Tony. One of the best channels on this whole damn site.

[@gusbisbal9803]

Tony you realise there are people out there trying to use their wood planer to create chips on tools steel don't you. Out of 100k subs, that is GOING to happen

[@turningpoint6643]

School of hard knocks when they do. But as soon as anything is considered idiot proof they just breed to defeat that. :-)

[@ThisOldTony]

I don't see what the problem is.. that's how I learned. :)

[@turningpoint6643]

Yep me too.And I don't think your videos are meant for or directed towards the real entry level hobbiest's anyway Tony. If someone did ever try it I sure hope they put a video up showing what they did and expressing how wrong your videos are. You can't buy belly laughs that good. :-)

[@marioeldridge8049]

I just want to know how or who sharpens his planer blades! Nice Chips! lol

[@ChunkyMonkaayyy]

Haha jokes on you. I have an electric planer!

[@icebuildsrobots]

You're at 1.08M at the time of viewing this. And the channel is exactly the same. Good. Whatever you're doing, keep doing it.

[@theKashConnoisseur]

Oh, I about died laughing when you popped on the "100k Subz" knuckle dusters! Watching this channel and drinking water at the same time don't go together lol.

[@CraigEngbrecht]

After seeing just the intro, the face makes so much sense, and I love the humor. Keep the awesome videos coming. I feel like we've known each other for years!

[@theonlybuzz1969]

Well Tony, this must have been some time ago, there’s me thinking about 100k but showing well over 700k! As per usual the video was brilliant, you manage to show us a proper “how to make a great product “ without having to endure a load of B/S and not buy expensive tooling that would cost more than buying the tool you wanted to make in the first place. Keep up the great work and I think it’s great that you use child labour in your workplace (kidding). But I think involving the kids is a good move rather than watching them waste their lives on a phone/ tablet/game machine etc. I wish that more people would involve them and help pass on their knowledge. Have yourself an your family a wonderful weekend, of course we can see some more of your videos.....Phil

[@davezatina3575]

Wait a minute... Where is Mr. T - Square. Aka, B.A. Bracket. That was terrible, I know.

[@davidcoghill8612]

Speaking as a graduate metallurgist, that's probably the best explanation of a stress-strain curve I've ever heard.

[@ThisOldTony]

phew! ;)

[@sharpeguns1]

@@ThisOldTony I thought it was about my ex-wife

[@Tricknologyinc]

@@sharpeguns1 You used a fly cutter on her?!?! Someone call 911!!!

[@rossscott7260]

As I sit down to watch this for the bazillionth time I realize the opening joke hits a little differently now that you're actually at 1 million subscribers. Congrats TOT

[@mooncoinphoto]

One thing surprised me - you're not actually old. Is your name even Tony?

[@Lucsueus]

Heya Tony, I might be considered a long-time fan by now. Never really figured to comment because you sorta feel like a mentor you just don't want to waste time of. Anyway, just wanted to say I love you. You're gold. Don't tell my lady I said this. Forever yours, a fan

[@robokid20001]

Now the one million subscribers joke is real! Congrats!

[@chrispeoples4606]

Hi Tony! Great work again, I'm going to use part of this video in my physics classes when I teach elasticity and Hooke's law!

[@marcoelli236]

so.. you do have a face.. lol.. very nice show.. surely every one of use pictured you differently and most certanly wrong... again very Nice vídeos.. and Stephan at the end talks just like the real one does!! my regards from Argentina!!! and sorry my English!!

[@ThisOldTony]

Thanks Marco! And that was the real Stefan talking!

[@ORflycaster]

Going back and re-watching the oldies and the learning continues. Hard to believe you were celebrating the 100K mark back then. Your content and humor deserve millions of subscribers.

[@outsidescrewball]

congrats Tony and thank you for the invite....great build

[@ThisOldTony]

Thanks Chuck!

[@makinwaves8147]

My mind has officially broken... I HAVE SEEN HIS FACE, ITS... TH... TH... TH...THE FACE OF GOD!!!

[@mozkitolife5437]

Same. Edu commented on his last vid (cheap deathtrap tig welder) and I couldn't handle the curiosity.

[@super5oldier139]

*JESUS CHRISTMAS

[@GiovanniCarloIglina]

For sure, that's a sharp hand plane!

[@ianleitch9960]

I can imagine that any kid that managed to watch you will have his thought processes totally bent out of shape - I love it. Planing tool steel, that has to go well when the kid tries it with his dad's beloved wood working tools!

[@cnc-enthusiast]

Did anyone else found the hidden message at 5:26 ? ^^

[@Marc_Miller]

Ha! Awesome.

[@802Garage]

I'm actually amazed you don't have 1M yet. Soon!™ You also look much like I thought/hoped. Only seeing this now!

[@mihailazar2487]

Ohh, so that's what the Space Marines in 40k mean when they say _"I will endure a thousand deaths before I _*_yield_*_ "_

[@hopper1]

I had a crappy night at work and watched this while I put my tools away. I'm much happier now :)

[@ThisOldTony]

Thanks Hopper, appreciate that!

[@davidhansen3691]

Oh that last bit with the cartoons made me laugh into a coughing fit

[@TheElderBrother]

I see you, you weirdo! This man is even greater than you already believe, people. I'm not going to embarrass him by telling you all the details, but he totally stuck his neck out for me, and pretty soon, after this pandemic foolishness is over, we will be dedicating our new workshop to him. So love the man as much as you can. He is every bit as good a guy off camera as he appears on camera. No joke.

[@RogerGoodledy]

That's not an exaggeration. 100,000 subs can't be wrong, and one of these days when we get our own channel popping, you'll see how much Tony mattered to a couple of strangers who were trying to start something good. He's The Man! Totally!

[@LuckySlevin7]

You are SOOOOOOOO close to a million... Oh I bet you are saving your next video for that milestone

[@robertogrady1321]

Great video, can't wait for the 1million subs episode. Had to start rewatching all of your videos again. I even bought a Tig welder and a mill🤔😆

[@Pdro-gw7lu]

Instructions unclear. Used penetrant instead of WD40. Dick now stuck in vise. Jokes aside congrats on 1 million subs mate

[@TheConceptBoy]

Did he lose half of his subscribers? Its says only 535K...

[@cav89-]

Holy smokes. I was sure it really wasn’t that old mr. Antony, until he showed the google profile pic. And... it feels like meeting an old good internet friend in person, who lives really far away, for the first time. For whats worth, it stands true on my side. Im a pediatrician (no, not a foot doctor, thats a podoatrian 😆. People often take one for the other), hobbyst woodworker, and got to Tony’s channel for the drill sharpening video, and stayed for the jokes (and machines. Who doenst like machines right?). And for a while, it stood as my favorite humor channel. It’s no overstating that tots scripts and production is top quality professional content. But then, probably subconsciously, I started get this weird want, which evolved into a urge, to start on some machining and metalworking. Almost like the subscribe messages are not the only subliminal messages on his videos 🤔 😆. I do mostly handtool woodworking (which i found tot is also fond of on the stool videos), and didn’t even had a drill press. Now, im halfway into building my lathe (the ideia is for it to be able to do some limited metalwork, which should cover 90% of my shop needs,but will be used mostly for woodturning) while scanning the deep web for a proper metal lathe. And a mill. I also got into welding (stick, planing an upgrade to tig for the next 6 to 12 months), electric work, electric motors, heat treatment... My handplanes feel lonely sometimes I think. But hey, at least my wood has time to dry properly now. Thank you a lot, my friend Tony. Hey, you are actually getting pretty near the 1kk subscribers now huh?

[@TheNortherner88]

Thank you This Old Tony for the great content! I can't wait to be around for the actual 1 million sub video! Thanks Again

[@mikeg8773]

I NEVER KNEW THIS VIDEO EXISTED...... I been watching for a couple years and had no clue😂 thanks recommend ✊✊

[@Kollar0718]

I'm still work from home and started rewatching the videos... 1 mil... 100k... 1 mil... how about now, This Old Tony? :D

[@flippah9101]

I think you can change your name from This Old Tony to This Tony ;)

[@dismalfist]

IT HAPPENED!!!!!!!! 1 MILLION SUBS!!!!!!!!

[@ken481959]

When I was in the US Navy in the 80's, one of the schools I went to was a metallurgy and heat treatment of metals, in San Diego. Probably the best school I went to. I say that to say this: While it may be difficult to find, get yourself a copy of the NBS 88 Monograph. It has the time/temperature charts for most anything you will ever do in regards to heat treatment. There is also similar information available for heat treatable aluminum alloys out there Here is one place to locate the NBS 88 digital.library.unt.edu/ark:/67531/metadc13269/

[@MonkeyOnesie]

And now he's made it, 1 Million subs for a hobbiest metal working channel... now he can finish that sentence

[@vincentguttmann2231]

the 1M joke at the beginning aged not tht well. And neither did Google+

[@Tazaki]

Wow, 1 billion subscribers!

[@marvincarvin1846]

First of all, congrats on the 100k subs! Secondly, congrats on the over-the-top production of this video. Now, technical questions. I noticed 2 things. 1) All of the milling on the insert seat in the holder was climb cutting. SOP? Or did circumstances dictate this? 2) When you flamed the holder, you had a bolt in the hole. Reason?

[@InsideAlan]

Marvin Carvin the bolt is to protect the threads, at those temperatures there is a risk of them oxidising.

[@InsideAlan]

Marvin Carvin I think!?!

[@ThisOldTony]

Yes, as Alan mentioned, to protect the threads. They're thin and sharp / easy to melt.. re: #1 I prefer climb milling when I can. Thanks for watching Marvin!

[@rinklestiltskin]

Just love the madness. I think our minds are similar, therefore we are both geniuses! Or its it genii? And thank you from us all in the UK for the metric translations.

[@gaz1967]

I'm from the UK and use imperial. Just like her Majesty.