One of the very best videos I've seen about headphones :-)
@CustomCans Жыл бұрын
Thanks ;)
@FeyaElena Жыл бұрын
Thanks for the review! The screensaver is just a bomb! We are waiting for the continuation, with measurements of frequency characteristics
@CustomCans Жыл бұрын
Yeh - it should be up in a couple of days
@djhavickofficial Жыл бұрын
BEST HEADPHONE CHANNEL 💯
@CustomCans Жыл бұрын
Thanks ;)
@flynnleese8222 Жыл бұрын
Great video. I actually recently got the DT900 and have been impressed. I'd almost consider it a modern DT880 since the tuning sounds much closer to that than the more "V tuned" DT990. I think they struck a great balance between a studio/work headphone and one that's also just fun too.
@CustomCans Жыл бұрын
Yes, I agree, they are a good all-rounder and will work with just about any equipment
@JarekPawlak3 күн бұрын
Hi. Very informative clip. In case of T1 it looks like if you replace outside metal shield from T5 you can have closeback headphone :) so you can change it from time to time depending you need :)
@1derment Жыл бұрын
So interesting to watch and listen to you "operate" on headphones! Looking forward to part 2..
@CustomCans Жыл бұрын
Should be up on Tuesday hopefully
@frederf69 Жыл бұрын
good vid my man! looking forward to the 2nd part ✌🎧👍 BTW i'm very impressed with the dual entry balanced mod' you did on my 1990's & super fast service✌😎👍
@CustomCans Жыл бұрын
Glad you like them - I will pass on your thanks to the team
@Hakku1403 Жыл бұрын
The HP king strikes again.😍 Thank you very much Sir.
@CustomCans Жыл бұрын
No problem
@xtra8dj Жыл бұрын
I have the 990 and the tesla 1990 and you can hear the difference as the 1990 is more precise. So, the 1990's is perfect for me using along side with Focal studio monitors Shape 65.
@CustomCans Жыл бұрын
Yeh - the DT1990 are definitely a step up from the 990. They cost 3 or 4 times more but I think it is probablyt worth it if you have the money
@xtra8dj Жыл бұрын
@@CustomCans First of all, man, you're doing a great job, thank you! It's worth to upgrade, but it looks like the 'mighty' EU messed up the monetary system and now the prices are going up.
@st200ol Жыл бұрын
One of the biggest negatives of Brexit was the effect its had on Beyerdynamic spares. Most spares just aren't available in the UK and they won't ship them to the UK. This has most likely had a big effect on prices of the headphones and their spares.
@CustomCans Жыл бұрын
Yes, to be fare, we reduced the range of spares we carry for them as we could no longer make a profit on them. Thomann is often a good source and they ship to the UK
@sig4974 Жыл бұрын
Title edit?..DT990 vs DT990 Pro X...👍 looking forward to your thoughts 😃
@CustomCans Жыл бұрын
Don't get too excited... I had to split the video into 2 parts, this part is just taking a look at the drivers in each of them
@Grrrr3FKAGrrrrGrrrrGrrrr Жыл бұрын
Love my DT1990s, but I'm intrigued by the angled drivers in the T1s. I can't really justify a fifth pair of beyerdynamic headphones though. 🤔
@CustomCans Жыл бұрын
If you love the DT1990 , I would stick with them. I have not tried it but you could stick some angled pads on them to get a little bit of the effect
@Grrrr3FKAGrrrrGrrrrGrrrr Жыл бұрын
@@CustomCans I'm looking at the angled pads I've just bought to replace the worn ones of my Audeze LCD2. I think it might be worth a try
@123kingho Жыл бұрын
Amazing video to show the interior design between the Beyers. Is there a significant difference between the DT990 editions and the DT990 Pros in terms of the ear cup designs?
@CustomCans Жыл бұрын
The drivers are the same but the earcups are slightly different with different openings on the back. I have modded both but not directly compared them. I may hav e to do that in another video
@123kingho Жыл бұрын
@@CustomCans Ooooooh, a video would be fantastic! Thanks a lot:) Appreciate your great work
@KaledTV Жыл бұрын
Sad Tygr 300R noises 😭
@CustomCans Жыл бұрын
Ah.. Sorry, we did not have any on the shelf at the time.
@mattstone50676 ай бұрын
What improvements are made to the 1990 by adding damping material?
@CustomCans6 ай бұрын
it is pretty subtle... The 1990 are more like semi open so there is still a lot of sound bouncing around inside - if you can cut down those reflections a bit it sound slightly less "boxy"
@adeadcrab Жыл бұрын
I always like the DT880 - was my first serious headphone as a wee 18 year old (after the Sennheiser 555 as a wee-er 15 year old) I have gone through multiple pairs of them as their jack is non-detachable and I was not as careful with headphones as I am nowadays - maybe I should pick one up and have it modded by yours truly?? Can you stock the 600ohm DT880 and send them out with a nice detachable cable? Would be interested in revisiting these headphones with an updated eye-popping headphone system!! Cheers
@adeadcrab Жыл бұрын
looks like the DT1990 is similar soundwise nowadays.... maybe we should get that one modded with 4-pin mini-xlr? See you in a couple of months... :)
@CustomCans Жыл бұрын
Yes, we have them in balanced jfunk.org/wpc/product/custom-cans-uber-dt880-edition-headphones-with-modified-drivers-and-detachable-balanced-litz-cable-3-5mm-6-35mm-trs-jack/ Or single ended jfunk.org/wpc/product/custom-cans-uber-dt880-edition-headphones-with-modified-drivers-and-detachable-litz-cable-3-5mm-6-35mm-trs-jack-copy/
@adeadcrab Жыл бұрын
@@CustomCans haha, you went for the 600 ohms also.. very cool also didn't even notice that
@Rod95ok Жыл бұрын
I've been interested in adding some dampening to my DT 1990 cups. What benefits does this have on the sound? Would you consider adding a dampening kit for the 1990 to your shop?
@CustomCans Жыл бұрын
Yes we will add that soon. We have temperately sold out of DT1990s but when we get our next batch in, I will work on a DIY kit
@Rod95ok Жыл бұрын
@@CustomCans Great, thanks I'll be looking forward to testing it out!
@johnwright8814 Жыл бұрын
There's no mention of diaphragm material and geometry. This is important in loudspeakers, so why isn't it in headphones?
@CustomCans Жыл бұрын
You are right, it is. We are currently in the process of designing some headphones and have been trying out different diaphragm materials and coatings. There are loads of stuff I missed in this but I squeezed quite a lot into 20 mins. We are planning on doing a video testing different driver designs and materials but it is a couple of months off being ready ... we are still trying to learn as we go along
@johnwright8814 Жыл бұрын
@@CustomCans Looking forward to it. We get zillions of headphone reviewers, but nothing about the design process.Such as; is damping for the management of the acoustic space, or for taming diaphragm breakup? I would love to know.
@Casualfulltime Жыл бұрын
Some Freddy Kruger vibes 😂
@CustomCans Жыл бұрын
LOL :)
@frxtrader32277 ай бұрын
Great video. I have a 770 pro and a 990 pro. my question is, which one can i put the tesla driver in?
@CustomCans7 ай бұрын
The 1770 or 1990 Tesla drivers would fit in either of those
@patricaomas875010 ай бұрын
what does ballanced do for you?
@CustomCans10 ай бұрын
for me.... It lets me have two full time staff making balanced cables ;) If you want to know what it may do for you... I have an old video here that may help kzbin.info/www/bejne/aJPTiWRpnLp9eKs
@patricaomas875010 ай бұрын
@@CustomCans 1x Balanced Beyerdynamic DT1990 £546.00 Convert Stock Cable - Yes £6.00 Fit mass loading and damping kit - Yes £18.00 Balanced connection type - 4 pin XLR Gold pins - Cable colour ( see colour chart in images ) - safety red - Balanced Litz Cable Length - 1.5m - Custom paint for the earcups and shoulders? - No - Standard Black parts - Fit Switchable Passive 8K Filter - Add Switchable Passive filter £75.00 Subtotal £645.00 Thanks seems like a lot of work for what I would like am I reading right could buy them directly like this from CC
@CustomCans10 ай бұрын
@@patricaomas8750 Yes, we normally have a couple of pairs in stock but they are built to order. They take a week or so to build so if you do order, you have to wait a little while for them to be made