Throttle Body Adaptation of the VAG cars (Audi, VW, Skoda)

How to perform forced adaptation of the throttle valve on VAG cars (Audi A6 C5, VW Passat B5, Skoda Superb) using the VCDS program.
Other videos:
⏩How To Clean the Throttle Valve Step by Step • Watch this before Clea...
⏩How the Crankcase Ventilation System Works • How the Crankcase Vent...
Hi! I’m Maxim, and on this channel I show how to repair and service the car on your own in the garage. Useful tips and lifehacks about cars.
Many thanks to everyone who watched the video, thank you for liking and subscribing my channel.

[@runexscapexBotz]

Found this somewhere online and I do not take any credits: I just copied this from a thread on Reddit. "Try adapting (also called basic reset) the clutch and see if it fixes your problem. Turn the car off, turn the key to II right before ignition, hold the throttle pedal down to the "button" for 20 seconds, release, turn the car all the way off (DO NOT REMOVE KEY) then back to II, then off again and then start the car. See if you feel a difference, you probably will."

[@roadtoeurope6017]

Can you make video on rpm adjustment, i cannot change the current value which is 760 rpm and value showed 128 on idle adjustment option. I have vcds 23.1 version

[@mmk958]

My car throttle body was doing fine and the adaptation was OK too, but after an injector problem, the garage suggested to do an adaptation for the injectors then the throttle body. After that a message came on "throttle body adaptation failed". Can you suggest anything please!

[@dreadwings3]

Gostei.

[@BariumCobaltNitrog3n]

heyyyy this is in Russian.