Something to consider is that deposits are usually the result of the PCV system in modern cars which routes spent exhaust gases into the intake manifold as opposed to venting them to atmosphere. Another issue is that over the shelf oils have low magnesium content and poor detergency. Over time, this collects on the throttle body, flows down the intake runners and hardens on the piston crowns as carbon deposits. In a 12:1 engine, this raises compression and invites preignition and knock which will pull timing and affect performance. One solution is to install a catch can to trap the vapors from the PCV while still maintaining proper vacuum and PCV functionality. The other is to use an oil that has high magnesium content and detergency so that any oil landing in the intake doesn't create carbon buildup. I use a custom blended 8.5W-35 that has the same level of detergency as diesel oil. I've used it in all of my cars for the last 7 years and even without a catch can, my throttle body stays clean which means the intake is as well.
@MartyMotoring5 жыл бұрын
Wow, that’s some awesome info! Do you custom blend the oil yourself then? Pretty cool. I did end up going with an air intake system that vents to atmosphere which has helped a little. And switching to full synthetic oil with decent ratings probably helped a bit.
@andymoraitis23515 жыл бұрын
@@MartyMotoring Hey Martin! I don't blend any oils myself. I work with a professional tribologist at BND Automotive, a small company based in Ohio that's big in the Mopar community that I came from, on all of my blends. He has millions of miles of used oil analysis showing how his oil and fuel additives can reduce wear to near zero levels in a variety of different gas and diesel powered engines. The blend he made specifically for me takes into account that with high mileage, there is seal degradation and some deposits that have been created. As a result, the additive package specific to my IS is designed to scrub the deposits from the intake and literally clean the engine internals to reduce any harmful deposits that resulted from using off the shelf oils that sinter at lower temperatures. I also use his fuel additive, Aces IV, which increase the octane of any fuel by 9 full numbers, not 9 points. This allows me, if I choose to run a less expensive fuel and still achieve the same level of knock resistance to ensure I get full timing. I still run 93 due to the detergency that it offers as it's cheap insurance to get the maximum octane I can on something running 12:1 compression. With an octane effect of 102 and increased upper cylinder lubricity I get max potential and performance at all times. The owner, Brian Schubert, is great to work with and will take the time to understand your specific needs. The best part is that this is PROVEN oil that can go 2 years or 15,000 miles between oil changes. At a cost of $130 for 2 years, it's less expensive than the $240 you'd spend on store bought synthetic over the same amount of time and more effective. Used oil analysis (UOA) substantiates this with millions of miles of data. I've been using Brian's products in all of my vehicles since 2014 and would never use anything else. Unfortunately, most people see it as snake oil. For those of who use Brian's products, we know they're the best. If you want your car to survive, you can run off the shelf oil. If you want it to operate at optimum condition, then his stuff is definitely worth a look. You can find more info here: www.bndautomotive.com As an FYI, I don't get any kickbacks or discounts. I have no skin in the game other than helping people see what's proven to be the best.
@DerekCully4 жыл бұрын
Andy Moraitis; wow! What a post. I am using 0w-40 with Liquimoly MOS2 additive and have been satisfied with it. Do you have any UOA’s of the virgin oil or a UOA of your used oil to get a look at the additive package of the oil you’re using?
@THEGAMINGHELP1014 жыл бұрын
FYI please make sure you use throttle body cleaner that is safe on modern throttle body (CRC brand is safe). The reason why is that modern throttle bodies have a really thin coating that harsh chemicals can eat away.
@SolidShoikot5 жыл бұрын
I cleaned my MAF sensor and it seemed to have done the trick.
@carterwilliam30479 ай бұрын
Replaced mine. Paid $1000 to a mechanic mines high rpms not as smooth shifting as should be. I’m 183k…
@kkeshav745 жыл бұрын
I had to get my alternator replaced last year too! So far the only thing that has gone wrong. I cleaned my throttle body when I changed my spark plugs for pre-100k maintenance, currently at 98k miles. You should change your plugs too with your mileage!
@deohasslehoff9565 жыл бұрын
Shot by Kumar man all our is350’s got the same thing goin on. I got my plugs on my way and ima end up getting some new tein struts soon as well
@MartyMotoring5 жыл бұрын
Seems to be a common issue haha. I need to do spark plugs as well
@rewindcouture33002 жыл бұрын
Always replace with the denso alternator!
@LexusPro Жыл бұрын
I am having idle issues after replacing my alternator..i wonder if i need to rebuild the original Alternator?
@LexusPro Жыл бұрын
@@rewindcouture3300 true
@Arctice365 жыл бұрын
If anyone knows pls help, I cleaned the maf sensor and started the car, it threw a check engine code with p0102 and p0113, then I drove it and revved it to 3k and started miss firing, I disconnected the battery for a few minutes and cleaned it again, after that no codes popped up and drove fine, does disconnecting the battery before disconnecting anything electrical wise will reset the ecu? I never had a problem with my g37 disconnecting and cleaning both throttle body and maf even spark plugs
@MrRob41025 жыл бұрын
Thanks for upload! Lexus IS 2nd Gen - best car ive ever owned!
@kgisabeast5 жыл бұрын
You should clean the MAF sensor at the same time, super easy to do, and that can also affect your idle
@MartyMotoring5 жыл бұрын
Yup, I did that before the video, thinking that was the issue. This cleaning definitely improved idle 😎
@chronikdrew97683 жыл бұрын
Do you use the same can to clean the maf sensor ?
@JakeSantos15 жыл бұрын
when I took mine off it was definitely a lot cleaner but I do practically floor it everywhere so that helps lol
@MartyMotoring5 жыл бұрын
I do too 😂 Unfortunately with the design of the recirculating lines and crankcase (and my mileage) it built up pretty badly I guess lol.
@richardguerra52812 ай бұрын
I thought you werent supposed to move the butterfly valve manually on electronic throttle bodys?
@rotrmotr5 жыл бұрын
Excellent video Marty. Definitely do a video for the PCV valve replacement. 👍
@leonidas99693 жыл бұрын
PCV is on the driver side valve cover I think it’s a 17mm and I always use penetrating oil to take off any hoses
@crazyprayingmantis55963 жыл бұрын
Can I just disconnect the wiring harness to the throttle position sensor and then manually open the butterfly to clean it? (Is250) I don't want to completely remove the TB and the butterfly won't open by pressing the gas peddle while car is in the "on" position like some people say to do with an electronic throttle body. So will disconnecting the wire be safe to then manually open it
@maxmenlow48485 жыл бұрын
Marty!! Make a video about your headlights and what kind of system you have behind them because the ALL of the aftermarket ones say “not compatible with HID or xenon bases” that all ‘07 IS’s have from factory. Yours are either LED or extremely bright halogens. Just make a video showing your headlights because i want to put aftermarket ones on mine to go with my aftermarket tail lights but want to see what setup you have. Thank you!
@MartyMotoring5 жыл бұрын
I can make a video about them, sure! They say that - because you can’t reuse the HID in the halogen projectors. I used an LED low beam since it’s white light and less heat. You also lose AFS, unfortunately. Good video idea!
@larkthomas33715 жыл бұрын
+Marty Motoring I want those lights, I bought a used 2010 model, & everytime I see a 2011 too 2013 model I wanna shoot myself. cuz.I love the front lights..!!
@MartyMotoring5 жыл бұрын
Lark Thomas These are just aftermarket ones that can work on any model, mine is an old 2007! Lol so it’s an easy upgrade
@skj4685 жыл бұрын
Marty Motoring Have you had any problems with them? I saw some reviews that said they get condensation buildup
@MartyMotoring5 жыл бұрын
@@skj468 No problems at all
@vvsre7604 жыл бұрын
I’m confused!! Are you supposed to open it and force your fingers into the butter fly? I thought that was something bad to do for electronic controlled throttle bodies ?
@moejr143 жыл бұрын
I though the same thing. No though that would mess up the calibration
@DeltaCharlie275 жыл бұрын
Should you do the intake clean like your buddy mentioned, then the throttle body? Great video, really nicely done.
@CloudG255 жыл бұрын
Did you end up spraying intake cleaner down the intake to help burn up all the gunk from the video?
@MartyMotoring5 жыл бұрын
I did not have any on hand when we filmed the video. I’d like to do that in the future though!
@nicklehman39845 жыл бұрын
Can you do a proper video for changing trans fluid and filter for the IS?
@MartyMotoring5 жыл бұрын
Nick Lehman Hoping to soon!
@elsupremo91883 жыл бұрын
A couple cool Canucks, I wish i had a friend like Steve but I am just not cool. I will definitely F this job up on my own it always happens easy to take apart and it's never the same after I put it back together... Damm ! Have a nice day guys.
@bradallen88744 жыл бұрын
Better lighting plz fam from beginning 🧤💚
@Erjung15064 жыл бұрын
can you clean the throttle without removing it? also when should you change sparkplugs? lexus maintenance recommends at 60k and 120k.
@Pneumonia014 жыл бұрын
Yes you can I did it without taking it out but makes cleaning it as a whole a bit mite annoying
@jangzo4 жыл бұрын
My is250 idle rough at stop lights. Going to try this to see if it’ll change anything.
@crazyprayingmantis55963 жыл бұрын
Try resetting the idle. 1. Start car until normal operating temperature is reached. 2. Turn car off 3. Put ignition in "on" position 4. Turn to "off" 5. Start car 6. Put park brake on and put your foot on the brake. 7. Put car into Drive 8. Let car idle for 3 or 4 mins. DONE
@jangzo3 жыл бұрын
Crazy prayingmantis thanks! I will try this. Also when setting the e brake do I hold down the brake while waiting the 3-4 mins?
@crazyprayingmantis55963 жыл бұрын
@@jangzo The only reason to hold down the brake is as a safety precaution to prevent the car moving, because it will be in drive.
@jangzo3 жыл бұрын
Crazy prayingmantis thanks!
@jaylockwood84173 жыл бұрын
You can just clean the pcv valve with degreaser and compressed air...
@vvsre7605 жыл бұрын
Damn I need to get my spark plugs changed soon, hopefully they don’t need to remove my Megan strut. The Lexus dealer
@MartyMotoring5 жыл бұрын
I need to do spark plugs too!
@leonidas99693 жыл бұрын
Marty Motoring Yes u have to remove the strut tower intake has to come off and replace upper intake gaskets and cooper fuel lines washers
@leonidas99693 жыл бұрын
Should take about 2 hrs by hand and 1 1/2 with cordless tools
@robertdaone3 жыл бұрын
Have to remove the entire damn intake manifold. Lexus made it a real biatch to do a simple spark plug change.
@papasmurf55944 жыл бұрын
Where can I buy the light? The link is not in the description 😭
@Scott-bf8km5 жыл бұрын
Marty, love the channel! Question though, did you replace the throttle body gasket as part of this cleaning? I'm going to tackle this myself this weekend and want to be sure i have one if you are supposed to.
@MartyMotoring5 жыл бұрын
Thanks, Scott! I did not, since the metal all looked good and round rubber gasket looked great still and doesn’t get ruined or anything like those other cardboard gaskets.
@readyforbattle18573 жыл бұрын
My Lexus has been having issues with accelerating some times after running it for a while. I wonder if this would help.
@ArXalanAli5 жыл бұрын
What are your wheel and tire brand and specs if you don't mind telling
@MartyMotoring5 жыл бұрын
Of course! They are OptionLab R716 in 18x8.5 front and 9.5 rear, 35 offset, and 225/40 front, 245/40 rear
@ArXalanAli5 жыл бұрын
Appreciate it!!
@gageflenard75912 жыл бұрын
I did this and there’s a coolant by pass on it ,did u jusr clamp it down or let the car cool down
@is4life5935 жыл бұрын
Good video!! Have you changed your Transmission fluid? I know a flush is not good to do. But a drain and fill is good.
@MartyMotoring5 жыл бұрын
I have not. I wasn’t planning to since it’s a sealed unit and people have only mentioned issues after changing it out...not sure if there is any benefit at this mileage.
@is4life5935 жыл бұрын
@@MartyMotoring Thanks for the info. I guess I won't change it either.
@vollste5 жыл бұрын
I just had my car with 170k miles in at Lexus of Knoxville and they told me tranny and rear diff fluids can just keep going as long as not leaking. Mine shifts fine and runs like new.
@Jerry-sy8rd3 жыл бұрын
What did you use to clean the MAF??? The CRC MAF cleaner say DO NOT use on Karmann vortex MAF’s that are on “most Lexus vehicles”???
@Carl_McMelvin Жыл бұрын
OLD Lexus vehicles. It says right on the sensor what it is, and that’s not what it is.
@hassangabbani275 жыл бұрын
Hi bro i wanna ask what do your suggestions about lexus rc 350 spoilers i want a spoiler and i like the one on the lexus rcF but iam afraod that i won't work so what other spoilers do you suggest for me and thank you
@mariocr975 жыл бұрын
Fantastic video! Keep em coming. Lexus told me the same thing about my idle when I got the new panels installed but I’ve been lazy to clean it, but now I’ll do it. One question though, what brand cleaner did you used?
@MartyMotoring5 жыл бұрын
Mario Thank you! I try to make one every weekend since I work in the week and it gets dark so fast. They pointed it out to me too when I was in for the alternator. I planned to use Carb Cleaner but Steve had some Brake Kleen spray that worked fine.
@Heizenberg.5 жыл бұрын
Rear diff oil should be changed each 24k miles or 48 months....
@MartyMotoring5 жыл бұрын
I’m not sure mine has ever been changed with 166k miles 🤦♂️
@bingofuel35452 жыл бұрын
Hey marty can you give a link or make a video on what to look out for when buying the 2010 is 250 awd they are priced pretty good now and i always wanted a lexus
@MartyMotoring2 жыл бұрын
This may help: kzbin.info/www/bejne/qp7XYYKufbZ4qrs
@KamilSTI4 жыл бұрын
You disconnected all cables, there is no error? you don't have to do adaptation?
@olegkhe3 жыл бұрын
Should adapt itself
@KamilSTI3 жыл бұрын
I confirm. I disconnected all cables and cleaned them. Adaptation itself after 15 minutes
@spyglass65265 жыл бұрын
Marty, im looking to buy a 2007 350 and the owner told me that his engine burns oil and many others do too. Checking on club lexus, I see that this is true. Does your IS burn oil? How does it affect performance? Other than changing the PCV valve, what can be done about the problem?
@MartyMotoring5 жыл бұрын
Spyglass I’ve heard that. My oil level never changes though, and I change mine every 3000 miles. The performance hasn’t decreased at all for me. I’m hoping that changing my alternator and PCV valve is all I need to do for a while.
@MartyMotoring5 жыл бұрын
Spyglass I’m not sure what could be done besides just changing the oil often and checking the seals
@spyglass65265 жыл бұрын
@@MartyMotoring gotcha. thanks for the help
@deohasslehoff9565 жыл бұрын
Spyglass my car burns 1.5 quarts during my 3.5k oil change intervals. I changed the PCV valve and nothing happened. On the forums it seems as if its a regular thing. Most burn and a rare few dont. Let me know if you find something else!
@spyglass65265 жыл бұрын
Dale Curiel ever had any trouble with emissions because of the oil burn? Also do you ever notice a faint smell (when you step outside the car) after idling?
@deohasslehoff9565 жыл бұрын
My alternator went out too. First one from ebay was defective so i purchased another and is working but now my car has a winding noise. Sounds like a baby supercharger. You experiencing the same thing with your new one?
@MartyMotoring5 жыл бұрын
I haven’t experienced that...sounds like a grounding issue? There is a natural whine from the transmission but I know what you mean - my old Subaru had an alternator whine.
@gparton855 жыл бұрын
If it's an audible electrical wine then it could be a simple grounding issue but if it sounds anything like the whine of a supercharger then I would inspect the trans and diff
@liquidh63445 жыл бұрын
You have really nice headlights. Where did you get it Marty?
@MartyMotoring5 жыл бұрын
Thanks! I have VIPMotoz. Aftermarket Headlights (VIPMotoz) - Lexus IS 250/350/F kzbin.info/www/bejne/pGLVlYN7Z61phLM
@kaldeskirie5 жыл бұрын
Hi Marty, have you had your car on the dyno? I'm curious as to the gains with intake & exhaust. Do you have it chipped? Thanks man
@MartyMotoring5 жыл бұрын
Hey there! I haven’t had it on the dyno but would like to soon, just to see what it actually makes. I don’t have any chips or tunes or anything
@jimmypattison18912 жыл бұрын
hiya did you have to do a throttle body re-learn after that marty cheers mate
@MartyMotoring2 жыл бұрын
Nope - resetting the ECU by unplugging the battery helped.
@taylorcepin4698 Жыл бұрын
NICE!
@LexusPro Жыл бұрын
What wheels are those??
@MartyMotoring Жыл бұрын
OptionLab R716
@gulrashid94453 жыл бұрын
What is mean for sound
@RamiSakoTOOL4 жыл бұрын
Love your videos mate. BUT you really can use better lighting in your videos
@MartyMotoring4 жыл бұрын
Thanks! Yup my camera screen would look bright, but the lighting was bad in the recording. I’ve since upgraded cameras and software.
@williamghau11503 жыл бұрын
Why does it die on the first time? Any theory behind it?
@LexusPro Жыл бұрын
toyota
@pete18175 жыл бұрын
If anyone could answer, it would be appreciated. Do I have to remove throttle body to clean, or can I keep it on?
@MartyMotoring5 жыл бұрын
You won’t get the backside clean and the cleaner could go into the intake manifold which is not good. Definitely recommend removing it to clean it properly....Just remove the airbox, a few bolts and 2 vacuum lines, easy stuff, even I did it. Good luck!
@gparton855 жыл бұрын
To do this properly the throttle body has to be removed. if you're not going to clean it in full then there's no point in doing it.
@syllable434 жыл бұрын
@@MartyMotoring Do the vacuum lines have fluid and do they need to be pinched?
@tnyskyline5 жыл бұрын
anyone know if there is a LSD for the is350
@mariocr975 жыл бұрын
Tony ren the frs/brz/86 fits right in I’ve heard
@deohasslehoff9565 жыл бұрын
Mario i hope this is true. I would love a lsd
@michealhunt48995 жыл бұрын
how did you get warranty on an 07? I have an old IS too... I need that! lmao
@MartyMotoring5 жыл бұрын
Freedom Drive warranty! Got it through a dealer
@michealhunt48995 жыл бұрын
@@MartyMotoring even if my car is an 08' with high miles?
@jonathancolling2284 Жыл бұрын
You could have cleaned it in situ really ? Just open butterfly with fingers and clean with a rag soaked in carb cleaner
@viscioushattermaid44105 жыл бұрын
How is the alternator after like 11 yrs under warranty?
@MartyMotoring5 жыл бұрын
I’m not sure if mine was ever replaced until I did it in 2017
@Happy-Me.5 жыл бұрын
Good video!
@balogen8985 жыл бұрын
Did you use brake cleaner to clean the throttle?
@MartyMotoring5 жыл бұрын
Carb and Choke Cleaner
@mdkgod435 жыл бұрын
whats that whining noise?
@paddy51412 жыл бұрын
Did you replace the gasket?
@MartyMotoring2 жыл бұрын
No reused
@paddy51412 жыл бұрын
@@MartyMotoring thanks 👌🏻
@TheTaker315 жыл бұрын
Oil catch can would help greatly more with that gunk ;)
@MartyMotoring5 жыл бұрын
Definitely something I want to look into! Maybe a future video ;)
@oneBIGMAC2go5 жыл бұрын
@@MartyMotoring If you do, please make a DIY video as the clublexus forums doesn't really have clear pictures on how to do it. Can't tell where the hoses are running in and out from. Thanks!
@TheTaker315 жыл бұрын
@@MartyMotoring Definitely should do a video on installing one. Only seen 1 video here on utube and it's not really a DIY. Guy already had installed it. XD They are fairly inexpensive. Can find them on eBay for $23-$45 shipped I got a $23 shipped rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F253772710449 all aluminum one without that clear plastic tube on the side. Those tend to fail with time due to heat.
@zacharyjog32755 жыл бұрын
Aye I have that snap on torch
@MartyMotoring5 жыл бұрын
I need to get one - it works perfectly
@EnderBombz4 жыл бұрын
its corona time
@hachraff35035 жыл бұрын
What's size of ur rims 19?
@MartyMotoring5 жыл бұрын
They are 18s 😎
@sharwinharinandansingh39605 жыл бұрын
Marty do a facelifting video !!
@MrMusicweekly5 жыл бұрын
I also had to change my alternator on this car. Must be a weak point
@MartyMotoring5 жыл бұрын
MrMusicweekly Seems most owners have! They are made by Denso for Toyota, so they must just wear out over time 🤷♂️
@PResmejor5 жыл бұрын
Had the same issue as well but my car is running fine after the replacement
@supboy6665 жыл бұрын
@@PResmejor mine went @ 90k miles also luckily was close to my home and my mechanic is close also so the battery lasted the drive there
@Heizenberg.5 жыл бұрын
2:42 That is very dirty buddy,....... New ones look snow white clean....CHANGE IT man....
@MartyMotoring5 жыл бұрын
Ali This is the blue F Sport filter, not the white paper stock one 👍
@Heizenberg.5 жыл бұрын
@@MartyMotoring is the blue one less thick? What's the difference...?
@MartyMotoring5 жыл бұрын
Ali it’s actually thicker and a mesh, so cleanable and reusable