Restoring 35 Year Old Toyota 4Runner Interior | Dirty Interior Removal

[@RM_Garage]

EPISODE 2, Sound Deadening Install - kzbin.info/www/bejne/iYDFq3SJgNqXbtU

[@danbarnes7633]

My 4Runner (86) came from Arizona the those back panels pretty much fell apart when I took them out. Built new panels out of 1/8" plywood and wrapped it in carbon fiber car wrap. Came out really nice. Also made a cover for the tailgate and also for the back of the rear seats.

[@RM_Garage]

I did something similar on an 86 I used to own too. I really want to try out repro panels from a guy I found on instagram.

[@gufiaito69able]

Please keep these 4runner vids coming! Thank you

[@RM_Garage]

Will do! The next video will be out soon, it’s taking longer than expected. A lot of work!

[@CB-hr6zs]

Can’t wait to see this 4Runner transformation

[@RM_Garage]

Thanks for watching!

[@87Supra4runner]

trailer wiring add on is what the rear wiring is about

[@leog9524]

Im seeing people use raptor liner then killmat on the floor and sides of the body and the carpet gonna give it a try on my 1st gen

[@RM_Garage]

I was thinking about that but not sure if that liner is safe in an interior space? (For breathing) I reached out to Lizard Skin which is a spray on insulation and they said they’re the same as Kilmat, just a different application (spray vs stick on)

[@touyang2846]

Looking forward to see more…i have an 89 1st gen v6 that i would to restore in the near future

[@RM_Garage]

What color should we use for the vinyl/carpet flooring? What sound deadener do you guys like? Any advice for paint to use for those rear panels? Thanks for watching!

[@iarejoeyy718]

this is so cool man! im looking to do buy an old 4 runner and restore it completely!!! this is great information and a very well done video!

[@RM_Garage]

thanks for checking it out!

[@elgenerz]

9:30 That looks like they spliced into the taillight wiring for a trailer Harness.

[@adriancubilla2106]

sick video cant wait for the next

[@RM_Garage]

Appreciate it! Thanks for watching

[@callum31]

After getting stuck deep in a bog hole and ruining all my carpet I removed it and ended up keeing the exposed metal look. I actually prefer it this way as its easier to clean and I can just access the drain plugs! 😂

[@frederickmcknight2123]

Favorite trucks

[@anthonypenalber2237]

My two 4runners had that seat screw stripped 😂😂

[@felipesamuelhernandezrodar1387]

6:50 I know that😅

[@6thGearGarage]

Do you think you could brush on some epoxy or fiberglass resin on the back side of those rear panels to strengthen them and make them a little thicker?

[@RM_Garage]

Hey man! Love your channel, thanks for checking my stuff out! I had thought about that and will probably try that or something similar. There’s also a guy on instagram called keypanels that makes really cool repro panels.

[@christopherhock1958]

@@RM_Garage since Key panels is shut down have you found somewhere else to get some?

[@RM_Garage]

@@christopherhock1958 check out YodaRestorations on Etsy! I might be getting those ones.

[@Jeff_DeMent]

The cut wires in the rear may have been to a trailer plug. The black molding around the windshield isn’t sealing it, the windshield is sealed in with black adhesive. The factory windshield had clips and metal trim around it. You can put silicone under it and tape it down flat, then it will stay. 🤘🏽

[@KittyKat17985]

It's to bypass the safety switch on the tailgate that stops the back window from working.

[@straightshooterz]

I want see the follow up video on this project. I’m currently in the same situation with mines.

[@RM_Garage]

Follow up video was posted today, check it out! kzbin.info/www/bejne/iYDFq3SJgNqXbtU

[@666myname666]

This guy gets sponsor from Alpine Toyota .

[@dezertraider]

PROTECT THE STEEL..I BE WATH YOUR CHAN,,I HAVE 87,LOVE TO RESTOR IT..STAYWELL

[@shawncatchin24]

How did you get the passenger side seat to slide??? I have that same problem right now????

[@Miokomata]

Mine never came with seats, there a big plate on mine with two bolts.

[@chrystaledwards851]

Can you share with me any catalogs for toyota 4runner parts? Like the interior and so on.

[@chrystaledwards851]

I have a 1988 and need some carpet and panels replaced.

[@mattwhite1689]

where can i get a carpet kit for a 1987 4runner?

[@RM_Garage]

Rock auto

[@mattwhite1689]

Love the channel! Can you do a video on fixing the tailgate? The window, the lock and the wiring on the tailgate

[@dundeeecroc]

Hey RM, I have a 1985 4runner SR5 5 speed with a weeping firewall or something in that area on the driver's side up besides the left foot rest. any idea what the culprit is?

[@spacepigeon8841]

Windsheild seal is no bueno, mine started after I had the crack factory one replaced twice now, going to see if three times a charm.

[@billyrayvalentine5220]

Dude, I was half expecting you to pop out with a 9v battery and some hadji sandles!! Don't like seeing rando wires running through vehicles!😬😬

[@Adeline9418]

I have a 05 Ford Escape Hybrid that I pretend is a 4runner/land cruiser. I'm wierd.