The intent of Carb Cheater is to make the tuning experience much more enjoyable, to mitigate all the annoying guess work which always puts a negative spin on Carbs. I hated it for years, but loved classic cars - I tried to make the thing I always with I had when I was learning, plus its just handy to have anyway. It was something I wanted myself, and to this point it had never existed.
@fifthlomat717 Жыл бұрын
Can’t wait to buy one soon keep up the good work and you might not have to work for someone else
@ThunderHead289 Жыл бұрын
@@fifthlomat717we don't make any money on carb cheater, but im also one of those weird people that loves going to work. I don't feel like I accomplished anything otherwise and it's always a good challenge at my current place. 🙂
@bedlamite42 Жыл бұрын
So when is the dual carb version that has control of the mixture screws coming out ;)
@cdoublejj Жыл бұрын
it sounds to me like you have funny words. you never mention the actually mixing of fuel and other than it's dynamic air bleed/leak. so in that case it sounds like it might be best to adjust the carb slightly rich since the cheat can't actually add fuel to the intake runners but, it can add more air! EDIT: unless the metering blocks add fuel based on vacuum.
@free100x Жыл бұрын
This devise was a great idea, but the supposed carb tuners and carb makers might hate it. Think about how it might cut into their little scams and bucks they lose, if the devise fixes peoples tunes or does so mostly on their carbs.
@killingcursivekustoms Жыл бұрын
Oldskool carb guy here...whoever gives this guy flack over this needs a reality check. We need guys like this on our side, he's sharp as a tack, and has an inventive brain, hell ya...nobody should be giving him flack for simply trying to invent something that helps our cause. Kudos to you man...keep making stuff.
@stuckinmygarage6220 Жыл бұрын
👍🇺🇸👌
@jakefriesenjake Жыл бұрын
Absolutely!
@lordsauto Жыл бұрын
There all just jealous.
@jakefriesenjake Жыл бұрын
@@lordsauto oh yeah. They pissed that they have no idea on how to produce this kind of product.
@username-mk8gf2 ай бұрын
I believe that the AFR is as steady as it is displayed on his phone. It makes since because it is a static leak, only adjusting what comes out of the carburetor which is doing the leg work well enough on it's own. I could only imagine carb tuning was absolutely essential before EFI was standard, and that EFI actually sucks for efficiency, because controlling the smaller volume positively is ridiculous, and also because volumetric efficiency is not efficient at all, because expansion volume is greater than the intake, so VE will make an engine more power dense, but less efficient, the only way to get greater efficiency that way is if the power to weight ratio was much higher, in which case 2 strokes would be more efficient.
@DScaglione. Жыл бұрын
It’s a marvel of engineering that will save our classics for generations to come! Thank you Luke! Please patent this! 🏁 😎
@AndyL940 Жыл бұрын
Bit of an overstatement 😂😂😂
@DScaglione. Жыл бұрын
@@AndyL940 yeah but he’s one smart kid! 😄
@bobbyv5143 Жыл бұрын
So Luke, I have not read all the comments, but I am one of the older guys... 63 to be exact. I grew up with hot rods in the 60's and 70's along with a lot of drag racing. I have seen so many people that did not understand how to setup their car, or for that matter know how to size or tune a carb! This device, the CC, is just the tool to help with getting the carb set correctly. I am not sure why that is not understood. They need to take Derek "VGG" advice, "I got to believe it, because it's right there in front of me"! BTW - I am a software/program guy in the aerospace industry. I for one am really interested to be able to analyze data from the CC. Looking forward to getting my CC in the next round. Thanks again to you and Joe.
@Snowlep337 Жыл бұрын
I love it, it give the user to see what is going on with their vehicle with out having to go and buy $1000 worth of EFI stuff... This is something we needed.
@estonianperson1112 Жыл бұрын
With EFI you would be spending over $1000 just to make your car more complicated, and less reliable as well. With the CC if it breaks down, you just don't care and run the car like a normal carburetor. Simplicity is what we like!
@alltherpm Жыл бұрын
@@estonianperson1112this thing doesn't add fuel u need a closely tuned carb, so if u can't tune its for u it will help a little
@estonianperson1112 Жыл бұрын
@@alltherpm yes, and this is why I do want it sometime soon
@SirEpifire Жыл бұрын
The fact it's an entirely passive system in the case of failure is really what sold me. Carbs are my jam for the sake of simplicity and the right to repair. I don't like black box devices that will leave me stranded, so when I saw Luke actually selling this kit he's talked about for a while now; I just bout lost my mind. Proudly on the wait list for the beta tester units! 😊👍
@maxbialystock254 Жыл бұрын
Uncle Luke you are doing the Lords work for the young lads of today. Carbs, manual trans, old cars kept on the road all these things are TRUE Environmentalism Keep up the good work
@Hysteresis11 Жыл бұрын
"Don't wanna get passed by a Volkswagen..." 😂😂😂 You win the internet for today!
@Tinman97301 Жыл бұрын
All i have ever wanted (im 48) is to be able to trim my carb's just that extra little bit that the CC brings. Thanks for taking the time with your knowledge and making this happen.
@whistlepign Жыл бұрын
I pre-ordered a Carb Cheater because I like to know where I'm at with my carb tuning. I think I have it tuned pretty well by ear but with out a wide band, which I was going to buy before you developed the Carb Cheater, I didn't really know for certain. The automatic vacuum tuning was the cherry on top. Thank you for inventing the Carb Cheater and for your informative videos.
@1mattbutch Жыл бұрын
Sir, was it you that did the video and explained it’s like a controlled vacuum leak? If so, that’s what sold me. Let me understand what in the hell is going on and how it works sold me.
@justing7880 Жыл бұрын
Be proud of what you've made, bro. I plan one purchasing one soon. I love the idea that it gives you some flexibility like EFI, but if it goes bad, you're not stuck like you would be if an ECM goes nuts. I've always wanted to learn more about carbs and plan on picking up a classic soon to enjoy. I love the self sufficiency of being able to maintain your vehicle without the need of thousands of dollars in scanning equip. The fact you still have to know how to get your carb right, even with the carb cheater, for everything to work is great. Just takes the weakness of changes in variables that carbs inherently have. Thanks for following through with this project. Been follow8ng for a while.
@TheLadyStorms Жыл бұрын
I’m 55, been watching your videos for alongtime. When i saw the carb cheater and realized what it is, i got excited about the possibility it represents. I’ve always felt carbs are a compromise in a daily driver application. If you set your carb to perform it’s absolute best at w.o.t. It may not perform as well at lower rpm’s or midrange…if you find the perfect cruise setting, w.o.t. Might not be as good….not saying it would be bad, i just think for a carb to be good all around, you have to compromise a bit. I think carb cheater can help get us closer to a really good tune with less compromise. Therefore, i like it. I’ve been talking to my friends about it, so far only a couple like the concept as much as me. I can’t explain that. What’s not to like? Thanks for your effort!
@ThunderHead289 Жыл бұрын
You have it exactly figured out. Personally I want folks to tune for a good hard throttle and leave the rest largely to cc
@TheLadyStorms Жыл бұрын
@@ThunderHead289 man i got a kick out of the comment you made about the technology difference in the old feedback carbs and the technology in carb cheater. I can’t tell you how many feedback carbs and electronic spark control distributors i removed in the late 80’s early 90’s. The technology just wasn’t there back then. And for sure….in the 80’s it would have taken a building full of computers to amount to the electronics of the carb cheater and the phone interface. That’s where respect comes into play. I’ve been tuning carbs of all kinds sense i was very young. But when it comes to utilizing the technology that you have used make our old friend the carburetor easier to work with and function better, i’m not knowledgeable enough to get it done. But i think i can figure out hooking it up and using it! Lol
@meek01__53 Жыл бұрын
You and your partner created an amazing device, someone like me who doesn't have the experience of veteran mechanics truly appreciate your efforts. I can't wait til I can save up the money and buy one for my 67 mustang convertible, don't let anyone put down what you created!
@Mongoose3769 Жыл бұрын
Great video, the fact that the carb cheater can be removed or fail entirely and the car will still run on the old-fashioned carburetor is why I find this so much more enticing than an EFI swap. The best parts of the reliability of an all-mechanical carb and the superior control of modern computers. Keep it up man, grumpy old boomers are gonna be grumpy no matter what you do....
@Welcom2TheFunFactory Жыл бұрын
Luke: "I like to party" (Rips Carb Cheater outta the car and chucks it in the front yard) 🤣
@junkandjalopies3375 Жыл бұрын
Theres always gonna be critics, This is an amazing piece of hardware that alowes you to do so much for just a couple hundred dollars.
@markmcmullen1371 Жыл бұрын
Well done, feel your pain, please don't get down, I personally love this idea, it's tough trying to teach old dogs new tricks. 👍
@don66hotrod94 Жыл бұрын
I'm a Mopar guy, but really enjoy your channel. This carb cheater is pure genius. Don't listen to the naysayers.
@Rumstein357 Жыл бұрын
I am 51, been working on cars for 30+ years. I think this device seems fantastic. Good job, and God bless!
@joeyjustin6895 Жыл бұрын
I JUST TOLD EVERYONE. ITS LIKE THIS YOU ADJUST YOUR FUEL SCREWS IN THE MORNING THEB WHEN ENGINE IS HOT IN TRAFFIC AT 12:00 NOON YOU HAVE TO TURN THE FUEL SCREWS DOWN. THEN TURN THEM BACK UP IN TBE EVENING WHEN YOU GET OFF WORK AGAIN. YOUR PRODUCT DOES ALLLLL THAT FOR YOU BY ADDING MORE AIR WHEN ITS GETTING TO MUCH FUEL WHEN THE ENGINE IS HOT IN TRAFFIC. I THINK ITS REALLY REALLLYYY. BRILLIANT AND I LOVE YOU AND CARB CHEATER
@ThunderHead289 Жыл бұрын
You have the concept absolutely nailed 👏
@realazliving Жыл бұрын
Thanks. I started watching a while ago and I’m sure a fan of what you do. I don’t know why people give you grief over the carb cheater. Perhaps they don’t understand it. I started tuning carbs on dirt bikes about 1980 myself. My neighbor owned a bike shop and taught me lots about it. I’d like to think I’m half decent at it myself by now. The problem is that it just can’t be done perfectly no matter how good you are. If it could, no one would show up to a race with a box of jets, springs, air bleeds, and screwdrivers. The best you can do is find a compromise and live with it. Probably my situation is tougher than most. I live in southern AZ. Just to drive to town I go through almost a 3000 foot elevation change. It’s totally not uncommon for the temperature in one day of driving to range from 60 to 115. I’d love an expert to explain how to make the tune perfect for all that. It took me about 3 seconds when I first saw your product to realize how cool it was when you said it’s basically an IAC for a carb. I was like how genius is that? The cost of gas and parts these days makes me think this unit will pay for itself pretty quickly, especially for people that live in extreme situations. Don’t let people who don’t understand get to you. Maybe they live somewhere flat without weather. I don’t know. Keep up the good work. Thanks again.
@ThunderHead289 Жыл бұрын
I really appreciate comments like this because I can see that you are the type of person who understands this. Folks like to think of carb tuning and conditions as a 1 or a 0 scenario, but it's so much more dynamic than people realize. The compromises, oh the compromises ... carb Cheater was designed after I ran a wideband and saw that there was no way to perfectly tune around the variability. Does that make carbs bad? No - they make up for it on other fronts. But CC is a bid to "have our cake and eat it too"
@realazliving Жыл бұрын
@@ThunderHead289 the carb cheater is the best version of fuel injected technology for a carbureted situation I’ve seen. No one wants to run rich but no one wants to run lean more. I know the program thinks faster than me. Proud but realistic.
@benjaminhedderly4495 Жыл бұрын
Your invention is AWESOME......the only reason some people are disagreeable is HUMAN NATURE..... keep on going your own way and you will PROSPER 👍
@richiegreenelsh5684 Жыл бұрын
Thank you so much, looking forward to purchasing one of your carb cheaters soon I've been Following you for quite a while I've been building cars almost my entire life. All cooperated, and I've learned more from you over the years than anything I've ever read.
@richiegreenelsh5684 Жыл бұрын
Carbureted I hate spell check
@HEAVYINC Жыл бұрын
Keep up the good work! This will help hot rodding with out a doubt. In its truest form innovation is what the hobby / lifestyle is all about. This whole thing stared when the lads came home from the war and slapped a V8 in a Model A. There were a few raised eyebrows back then too.
@parkerazz4385 Жыл бұрын
This is great I've got the 440 dodge Mopar big block in my RV tuned pretty close I will absolutely buy and install a carb cheater to help increase my efficiency even more for when I'm traveling highway. Will also be running methanol injection it increase efficiency even more.
@kontronman10 ай бұрын
This is amazing, I just preordered mine. In a way the device is adjusting the "holes in your fuel map" but for carbs! Carbs only have so much tunability on the fly. I try to picture this in my head kind of like the difference between a reimann sum and an integral on a curve.
@ThunderHead28910 ай бұрын
Should be out in a month 🙂 we have to say pre-order because of shopify rules, but we're shipped out up to order number 1650 or so of the 1873 orders. We're catching up slowly but surely
@sepposeppanen172 Жыл бұрын
Can't wait to have this in my hands. It makes a lot of sense and brings tons of benefits with reasonable money. Knowing this was coming available, I sold my Holley Sniper setup before I ever installed it. Back in carb and this time for good 👍
@andresleder767819 күн бұрын
I know some japanese cars in the 80's early nineties had something similar...a vacuum electric switch valve hooked to a manifold vacuum port of carburetor that was used for emision/smog control. In my Toyota 3y engine this valve stopped working and I replaced it hooking a small motorcycle filter instead. But your invention is genius by placing the controlled vacuum underneath carb to keep engine really efficient and also preventing fuel wash in cylinders from running rich. Wish I could get it in South America...shipping costs are a killer. Congrats and all best!
@belle430813 күн бұрын
Toyota did that on the 4a-f. It’s called an Electric Bleed control Valve. I got here cuz mine broke and is unreplaceable. So I figured there had to be a way here it is !
@andresleder767812 күн бұрын
@@belle4308 I think a canister purge valve in modern cars could work the same but I hosed a small motorcycle fuel filter to the carb...way cheaper.
@Arizonaperfect Жыл бұрын
Running a lean mixture during cruise conditions is not hard on the engine. The rule "Lean is Mean" only applies when the engine is under heavy load and/or wide open throttle. That's why carbs have some type of enrichment (power valve or vacuum controlled metering rods) to provide extra fuel while the engine is under load.
@ThunderHead289 Жыл бұрын
I mean, your preaching to the choir.
@TheKeymaster316 Жыл бұрын
Don’t worry about the haters. Most of it is jealousy, I’m sure. It’s a great, economical way to improve your carburetor experience. Always look forward to your videos and you’ve helped me tremendously over the last few years on dialing in my Holley.
@dacolino84 Жыл бұрын
Unfortunately I am not surprised that you are catching negative feedback. I have followed along this whole project watching each video and within the first few minutes of your into of CC my thoughts were, wow someone actually did it and had the basic principle of what you verified in this video. It's great that you are deomonstrating what it can and SHOULD be intended to be used for...and to me, its a brilliant product for people who actually want to daily drive, or be able to comfortably drive a carbureted car safely and easily into varying temps & air density, and get a cleaner exhaust and better mpg while doing so. I have some potential ideas for further testing this in other applications...like on my 83 Rabbit GTI that I have running on Weber DCOE45's, and maybe even old motorcycles (I own a few 70's sohc4 honda CB's) which could potentially bring you to a bigger audience that may work well in other applications. Keep doing what you are doing, I think this is a much needed support product to improve carb application for regular use and may take some time to catch on. I know there are many others like me who truly appreciate the engineering and thought that went into it.
@davidjames2788 Жыл бұрын
Can you go over all of the non stock items in the interior of the Maverick? I like the screwdriver holding the gate latch closed on the glovebox, and the bungee cord on the visor, mostly because that’s how my cars end up being. Nothing more permanent than a temporary fix that works.
@ThunderHead289 Жыл бұрын
You should see my clutch pedal and turn signal lever 😄
@davidjames2788 Жыл бұрын
@@ThunderHead289 i converted my El Camino to hydraulic clutch, so I’ve got a master cylinder from a 93 camaro, with a custom made pushrod, bolted with a sandwich plate to the original pedal arm. It’s ghetto as heck, but works like a charm. I’d love to see yours lol.
@dontworryaboutit8445 Жыл бұрын
Luke, I am 130 years of age and I have been working on cars ever since they came out I cannot wait to see what you come up with next!
@blakegaddis946 Жыл бұрын
Luke to hell with them, you're doing a great job. I just ordered one of your kits, not because I don't know how to tune but more so as a tool. I was get ready to buy an afr gauge kit, and after watching what you have done with carb cheater, this just made more sense. With carb cheater and its data logging alone, I will be able to fine-tune my advance curve and vacuum pot so much easier! It's hard for one guy to drive down the road and pay attention to a vac gauge while operating a mighty vac while maintaining a certain speed and logging that info in your head! We are dealing with people who think the vacuum advance just needs plugged. These people are missing the point anyway! Keep up the good work! I support you, brother!
@fredmonroe6042 Жыл бұрын
As soon as you guys make a cheater for a Motocraft carb that is attached to an AMC I-6 258 lm getting one. I’m over 50 yrs old and bought an old Jeep with a carb so I could learn about tuning. I think you bringing this to market is a great idea.
@justin_time Жыл бұрын
It never ceases to amaze me how some people will come up with a way to complain about any new product, no matter how much it may be able to improve a person's state. A vocal minority. Stupefying.
@guyhulscher6857 Жыл бұрын
I think this is a great idea. It cleans the burn throughout the variables in operation. I dont understand why people give you criticism. Good job.
@markmatt9174 Жыл бұрын
Just wanted to say hope YT is paying out on this one, 7 commercials in 10 min i almost shut it down, Keep up good work.
@ThunderHead289 Жыл бұрын
That's dumb. I'd I don't intensively place ads, I get the auto populate - usually in the dumbest spots
@jonoh4883 Жыл бұрын
Just when you thought the Carb is at its maximum evolution..... This guy comes out with a neat thing for the gadget age.... well done sir...
@woozylol1141 Жыл бұрын
The sheer amount of information it gives I feel is invaluable, especially for someone like me who is about to swap to a carburetor for the first time
@mikegore5840 Жыл бұрын
I like your idea and giving it to everyone at cost is great. You guys should make a lil something on it. The efi guys will be lawyering up, looking to stop this. Great idea.
@shockcoach Жыл бұрын
I sent your video on the carb cheater to my Ford buddy, who’s newest vehicle is a ‘78 Bronco. He really loved the idea and is thinking about getting one for his’77 LTD to try it out. Despite any negatives you may be receiving, this is a great product. 👍
@beezlebub3955 Жыл бұрын
I think it’s cool as hell what you’re doing, I’ve never had a carbureted car, but I understand the struggle, and fully support what you’re doing brother keep pushing 🤘
@stevop80_45 Жыл бұрын
Im 42 years old, I just got into muscle car building a few years ago (software engineer by day). I have struggled a bit with carb tuning, so I think a product like this is brilliant! I especially like being able to tune to different parameters on the fly, makes the process of experimenting or dialing in the car much more efficient, and probably more accurate too! Don't let the old dinosaurs discourage you. You have a brilliant product here that will help many people, allowing the hobbyist mechanic to do more for themself (like me!!). Think I'm going to get one of these to see if it can help me out with my '83 camaro with a street demon carb that I have managed to get close but not perfect. Thanks for all that you do!
@captainrawn Жыл бұрын
Luke I am also an older gearhead as several others have mentioned here. I'm a decent carb tuner but not as good as this thing is. The difference between us is that you have a huge technology advantage vs when we were your age. I'm thrilled that someone like you has the desire and expertise to design and build a product like this that will greatly improve the carburetor experience for many people of all ages and experience. This product is a winner and so are you. Ignore the criticism unless it is constructive and beneficial to your Carb Cheater device. Keep up the great work! Cheers from Canada.
@ThunderHead289 Жыл бұрын
Thanks so much, trying to not be distracted by the bs and keep my nose to the grindstone
@captainrawn Жыл бұрын
@@ThunderHead289 Stay focused on what you are doing and good things will happen. Regarding the skeptics: "Any fool can criticize, condemn, and complain. Most fools do".......famous words from Dale Carnegie
@EldonBeix7 ай бұрын
Luke - I have spent more than two years plating around with EFI being controlled with a Speeduino controller that I built and programmed myself. I enjoyed that process and learned a lot through it. When I heard of the Carb Cheater it made an instant connection with me as while the EFI was a fun exercise I really do like the simplicity of a carb and to my mind the CC offers the best of both worlds - well done Luke.
@ThunderHead2897 ай бұрын
Thanks so much - that's where I was at, I wanted the simplicity and robustness of a carb, but some of the adaptability of fuel injection. I also wanted to couple that with the ability to see what's going on and informed tuning decisions based on data instead of playing educated guess
@EldonBeix7 ай бұрын
@@ThunderHead289 Precisely!
@davidcrain9050 Жыл бұрын
Keep up the great work Luke! This is my FAVORITE KZbin channel! Pre-ordered my Carb Cheater and can’t wait for it to arrive. I’ve dialed in my dual Dellorto carbs for idle and WOT, but the progression circuit and transition to the main jets for efficient cruise has been tricky. The Carb Cheater’s “dynamic vacuum leak” will get me that last little bit of fine tuning and auto adjustment I’ve been searching for. THANK YOU!!! I’ve shared your videos with all me friends and can’t wait for them to test drive my car with the Carb Cheater installed. The data logging is worth it’s weight in gold.
@brianhdueck3372 Жыл бұрын
Hey Luke! I always appreciate your no nonsense approach to these old rigs. Keep up the great work. I hope to get our of these for my 76 F150 shortly.
@ripplerbr Жыл бұрын
Thank God for your ingenuity. If this system does what you say, I will be ordering several units. I will be placing an order shortly. Thank you!
@parkerazz4385 Жыл бұрын
I would love to see the carb cheater set up with that custom lawnmower carb intake you had set up! Do it!
@mattj6676 Жыл бұрын
Most folk's first reaction to something new is to trash it. The way I see it this takes a $400 carb and self adjusts the air fuel mix to keep it running clean and prevent burning the pistons and valves. Even a well tuned carb can't do that, you have to pick either a cruise or race mix setting, or most folks do a mix of both which means it's never really right. You get the safety and efficiency of a fuel injection with the cost of a carb and whatever you'll sell these for. I think it's a good idea!
@OfficialDajoYT Жыл бұрын
I personally think that CC is genius. Not sure how someone didnt come up with this before. Ive tried explaining CC to some friends and they dont really believe in it mainly because 1. Its "a computer" and 2. They say that its not changing the timing or changing the fuel mixture screws to give the ability to basically have horsepower on demand. CC is simply a helpful tool to make carb tuning a little easier. Its not an like an LS engine where everything is fully computer controlled.
@estonianperson1112 Жыл бұрын
Technically it is a computer..so they aren't completely wrong lol Tell them that if your carb has a vacuum leak(say on intake) it will also change fuel ratio to be very lean, and now tell them that CC is a controlled intake leak..simple enough
@hunnybunnysheavymetalmusic6542 Жыл бұрын
I have never had any problems tuning a carb, and have no idea why people would have, because they are really simple machines. That said, I really like this whole thing you have done because it really helps fine tune to a whole new level.
@garyslentzii2796 Жыл бұрын
You are a genius for coming up with this. Don't let some other company (China) steal your idea, before you know it, ebay will be flooded with it. Great freekin job dudes! I wish i needed one, or maybe pull the factory FI off & buy a Holley 😅
@daveunderwood6498 Жыл бұрын
Ok, I've got to say this. Luke, you are way to nice a guy. I'm a 60+ year old cranky millwright, so take this from where it is coming. 85% of these internet genius's don't know whether their ass is punch, bored or drilled. I've listened to men of all trades, all my adult life. Some of which all I can only wonder, how many times they have been dropped as a child. Older men should know better, and I'm talking about well known KZbin "stars". We all know who those are. Personally, I'm into efficiency. That was my forte as a maintenance mechanic. One thing I have learned, and that I have suspected all my life but grown to know in the past few years, is that most all science is at best skewed and at worst corrupt. I don't know how the stoichiometric ratio in automobiles was determined, or under what context, but if anyone believes this they probably believe in Santa Claus. I think it was put in place as a limiting factor for...(fill in the blank). That lawnmower carb, that you had on your earlier videos, works excellent on a 351 modified in a 4x4 f150. Thanks for the info and having the guts to try it. It gave me a little push. This is a message to all men. Shut up, listen and learn. If you don't, eventually you will end up looking stupid. And that is just embarrassing.
@track1219 Жыл бұрын
Read up on the stoichiometric ratio. It’s real, not Santa Claus.
@daveunderwood6498 Жыл бұрын
@@track1219 You do know that those Penthouse letters aren't real either, do you? Really?? You think everything that is written is true? Are you freak'n brand new? I can only hope you are a 12 year old troll and don't know any better.
@researchandbuild1751 Жыл бұрын
This comment was entertaining as heck 😂
@WesternReloader Жыл бұрын
I like the idea. I too really only concern myself with altitude when adjusting my carb, as I live at 5000’ plus, but regularly mosey on down to sea level, but my issue was the opposite of yours running rich in the mts., as I would lean out. Initially I fattened up my mixture so I didn’t worry about heading to the lowlands, then I considered buying a carb plate, that ADDS fuel. Ultimately I bought a second carb. So now I run a summit 500 jetted for my home in the mountains and a summit 600 jetted for the valley/beach. The swap takes 5 minutes
@georgelookas4694 Жыл бұрын
No idea who would be against this kid. He young bright and excited about old school shit. He’s adding another tool of endless tools in our tool box. Keep it up Luke, you’re doing fine.
@kennynelson2269 Жыл бұрын
I for one think the carb cheater is unbelievable new tech for carburetors.. keep it up luke
@davidsawyer1599 Жыл бұрын
Long ago, Hot Rod magazine ran an article on carburetors. They rated the prowess of carburetor tuning from average enthusiasts all the way up to Pro Stock. When Pro Stock was running dual carburetors. The average person with just a modest set of tools would be to tune a carburetor merely by seat of the pants. The Pro Stock folks, they referred to them as Wizards. I believe your invention takes all the wizardry out of carburetors for the average enthusiasts. Folks don't have to spend thousands on EFI that they truly are not going to exploit to its fullest.
@alexhuelsdonk19563 ай бұрын
You’re a genius, you’re amazing guy. F all the haters
@teresamarkhofstrand7459 Жыл бұрын
Uncle Luke, First off love the informative content. Ill be the first one to say I hardly know what there is to know about Carbs. What i do know is with mine its a delicate process and alot of factors come into play. As mentioned in my last comment on your last carb cheater video your kickin a** an takin names. With that much (99%) of what I know is from you and your videos. Im extremely grateful for. Your someone I admire a and strive to be (in my own way) but your admiration and ability to do what you do is amazing. Dont let those keyboard warriors get under your skin or the ones thst dont believe in what your doing. You have created a HUGE game changer which I am proud of you for. If I could I'd nominate you for the automotive noble award if there was such a thing. I dont want to see those people ruin a great person in this community and the things your doing for our community. Keep doing what you do and hold your head high my friend. Thank you for all you do. OG thunderhead289 fan for atleast 8-9 years
@thomasknobbe4472 Жыл бұрын
I do not know what is the motivation of the nay-sayers, but that is neither my problem nor yours. You have come up with a simple, fool-proof-as-possible, response to the problem of how to make a statically functioning carburetor responsive to the dynamics of changing use in an everyday environment. Genius is the ability to see what is right in front of us that others cannot. You saw a way, and more importantly, you found a way to make it work for anyone with a drill, a screwdriver, a set of wrenches and a cell phone. Pretty cool. Keep it up, young dude, we got your back.
@tommy2dollaz Жыл бұрын
I love what you've come up with and the work you've put into it. The smartphone/live integration reminds me of an app for EFI BMWs that's really awesome called MHD that you should check out if you're not familiar with it's features, that one is SO easy to use and makes adding HP so easy and live datalogging w/ a web hosted CSV to go back and analyze runs and diagnose other issues. I've always been an EFI guy, but I've been wanting to try a nice, simple carb setup on my next project and your technology put me over the edge no question about it. If you have a decent carb in decent shape, this will help make it so much less of a mystery and take so much annoyance out of getting everything running right.
@volvobrynk8 ай бұрын
Im a carb guy, and I love everything this. I don’t need an AFR gauge in my car. But I love to have it on my phone. There is so many good thing in this, I hope it gets the respect it deserves!
@ThunderHead2898 ай бұрын
It's gone very well, on order number 2,070. Surprised that many people are still into old cars 🙂
@volvobrynk8 ай бұрын
@@ThunderHead289 and more to come I hope. I can get an AFR gauge, for almost the same money as carb cheater and the look of the AFR barters there me, so the CC will be perfect. I’m contemplating how to make it Work with my 4 banger, with 2 Solex c45 ADDHE carbs. That has no porter Vakuum source. I need to drill ports in my setup. But I’m really contemplating to make the move.
@markhoffman6861 Жыл бұрын
Luke, you are AWESOME! I'm 62 yrs. old and I love my carburated engines and would love to get one of your carb cheaters for my '84 Dodge truck, but I'm so old school that I don't have a smart phone...I still carry a flip phone...maybe one day. Keep up the good work.
@dondotterer24 Жыл бұрын
If you are going to run a carburetor and drive the car I think it is a great investment. There are only positive results.
@matthet Жыл бұрын
Don’t worry about the naysayers. They feel it’s their duty to cr@p on anything new and innovative. I would have LOVED for this to be available before I switched my old truck to TBI. Keep up the good work!
@armygreenfj3924 Жыл бұрын
What i like about this system is that it’s basically the same price as a high end Wideband gauge and sensor. But it has the ability to autotune or you can set it on manual if you wanna practice tuning it yourself. Sometimes when the weather changes I don’t have time to be adjusting my carburetor on my k5 blazer i just run it and go even if it’s running a little rich. But with this system it seems like you can just set to auto tune and it’ll correct the air fuel ratio for you. This is huge especially if you’re a off road enthusiast or live in higher elevation. Not to mention if the system ever fails you can still drive your vehicle home. Also did I mention that its basically the same price as a high end Wideband gauge 😂. If you’re planning to install a Wideband gauge you’re probably better off getting this unit.
@tomrynkewicz7674 Жыл бұрын
I think it's great! I'm with you. Carburetors for life! Too many people are afraid to think outside the box or to even take a chance on something being better than what's out there. Great video. Your world's tallest intake video was amazing as well. Just goes to show there's always something to experiment with and be totally surprised by the results.
@darthgator639 Жыл бұрын
There will always be haters Luke, do not let those guys bring you down. Also, many of these "Veterans" are just scared of change. They like to go the way of the Dinosaurs, and thats fine by me 😉
@DavidLang1975 Жыл бұрын
fellow nerd here. for high compression engines, if you added another wire to carb cheater sensing starter activation, you could delay ignition for 1 second to let inertia help it start easier. even though I don't have any carb cars currently, I wish this existed when I owned my camaro, I always wanted to use EFI but never had the money and eventually sold it.
@black82f100 Жыл бұрын
I am 48 years old and I have messed around with a lot of carbs and I am glad to see that you took the time and effort to improve the quality of the carburetor I like carbs you get that quick snap and quick drop when you rev the engine with fuel injection when you rev and let off the rpms hang for a few before they drop Great job I'm ordering 1 soon
@hgsnotes Жыл бұрын
Whenever something new comes along there are always people that will will bash it for one reason or another. If the product works though it speaks for itself and the doubters will either shut up or come around. One thing I would recommend it that you write up tuning procedures to go with it. If it truly is a tool to help tune the carb then there should be instructions reflecting that. ie. If the indications are this and the cheater is compensating by doing this, here is where you should change your carb jets, metering rods, air bleeds, etc. The user could move it from vehicle to vehicle.
@robertrudeseal4200 Жыл бұрын
Thanks Luke, you answered a lot of my questions. I'm retired and now build old mustangs, sometimes these old carburetors can be very tricky. You have come up with the perfect solution. Been checking reviews of people who have tried your product, and those who have tried Carb Cheater have given you a high approval ratings. I'm almost sold! Love your channel.
@jamescutler8055 Жыл бұрын
58 year old old school car guy here. I will be buying this product because with a bad back and bad leg the less time I have to spend under my hood the better. If this keep me from having to convert to fuel injection then I am all for it. Anybody giving you shit about this is just jealous they didn't think of it or have the skill set to develop it. Or they are afraid that the black magic of carb tuning will be taken from them.
@timtaylor6147 Жыл бұрын
I rebuilt many a ccc carb back in the 80s I was one of 2 techs that could understand them Tweaked a few e-q jets for customers When I did an overhaul Used to grab quadrajet secondary metering rods and hangers for my carb parts cup
@excaliburjohndeere7657 Жыл бұрын
I have a 2000 Honda insight. It’s a three cylinder about 67 hp or so. Disconnect the battery it’s no longer a hybrid. used 20 feet of copper tubing from Lowe’s It’s wrapped around the catalytic converter for heat. I also have a adjustable valve On the fuel line to just barely let enough gas in for the car to run. After 4 miles the gas is real hot and vaporized and the car runs much better. I get about 100 miles to the gallon at 50 miles an hour. It’s about 115 at 40 miles an hour. Drove home from Memphis last week 64 miles an hour behind a semi truck and got 80 miles a Gallon. But I was driving real close behind the big truck.
@chrisb9900 Жыл бұрын
I’m excited for CC, got my order in. Can’t wait to see how it works on my Stroker high hp BB Mopar. Also want to try it with a six pack as well. I’m 29 and getting into tuning carbs, glad I didn’t go Efi. Can’t wait, keep up the good work Luke.
@rong4189 Жыл бұрын
Good video and surprised you’re getting any flak. I wouldn’t worry too much though, plenty of us ‘electronic’ ignition fans out here!
@nunyabiznez3584 Жыл бұрын
SMASH THAT LIKE BUTTON, FOLKS! Luke, don't let these armchair mechanics steal your joy and sense of accomplishment for your awesome invention. Some folks just get more crotchety the older they get! I truly think in some of their minds they don't want other people to learn how to do technical things because they somehow feel less important and needed in general?? You keep being you. THAT is why we are here! I am excited about this product and have been a gearhead for over 40 years! Keep up the good work!
@user-bw5ll8ho3q Жыл бұрын
There will always be naysayers no matter how great something is. If you're one that disagrees with carb cheater then don't use it. The rest of us who just want our daily driver to run better without constantly making physical adjustments, this is such a great invention. Luke, what you guys are doing here is absolutely great! Don't let the naysayers get to you. You have plenty of support without them and their poor non-progressive way of thinking. And to the naysayers... we wouldn't even have automobiles in the first place without people like Luke, so even if you don't want to embrace the progression, he still deserves your respect.
@DigIntoGaming11 ай бұрын
I absolutely love the carb cheater! I know little to nothing about tuning a carb, but I will try my best to learn! I'm a tech guy at heart but never really liked programming, I'm more of a hardware guy. Anyway, I love how much thought you put into this. I love that you can just disconnect it and still keep going. I'm working on restoring a 1976 Chevy c10 and I want to keep everything mechanical or EMP resistant. For daily driving until SHTF the carb cheater will help the wallet with achieving better mileage. Not to mention that driving old cars and trucks is just cool!!! Oh and I am by no means a mechanic but even a chimpanzee could work on these old vehicles. Not to mention how much documentation and old heads out there you can ask for help. Parts are simple and thankfully still in production and available. Keep it simple stupid 😂. I plan to swap a 1996 vortec 350 into my c10. I believe the engine I have is mechanical fuel pump compatible but if not, it's not impossible to build a 350 small block for cheap. I want a 200r4 or 700r4 but I think keeping the 3 on the tree Saginaw 3sp manual transmission will be the easiest. I can always swap something else in if I want. Aside from basic restoration like rust removal and seal and metal repair of the floor pans, rocker panels, cab corners and some other minor spots around the body, the truck is solid 😅. It's been in my family for 23 years and has sadly been neglected, it was "fully" restored when we got it but I have a feeling it wasn't all that well done. I have big plans for this truck. Some loftier than others. Like converting it to 3/4 ton axles and brakes as I believe from my research the frame thickness is the same, just needs some various frame re enforcing. I'm going to be replacing the wood bed with metal plate and rubber mats so it can be used as a work truck and still look pretty, I do prefer the wood look but it's just so expensive and not very durable. I want to install exhaust cutouts for impressing people 😂 but keep a quiet exhaust for daily driving. It currently has a 250 i6 straight piped but it's just not what I want. The carb cheater will help me put this truck back on the road and prevent it from becoming scrap! Thank you for your hard work! Can we buy the carb cheater yet? 😊
@joebloe9901 Жыл бұрын
What i love about carbs is that if you drive like an old man you can get great gas milage. I can crawl around the mountains for days on a full tank. Not so far with injectors.
@leegreengrass1201 Жыл бұрын
Just ordered one. Thank you Luke and Joe for taking the time to make this!
@williammaple8857 Жыл бұрын
I love this idea! I'm young and new to the hobby and don't have a clue what I'm doing. I've learned everything I know from family, old gear heads, and KZbin. I just bought one of these and I'm super excited to try it out on my carb. I can't believe how close I was to buying fuel injection nonsense until I stumbled upon your channel. I hope this catches on because it's super slick!
@muffdiver777yummy8 Жыл бұрын
absolutly amazing achievment with the cc ! you have definatly added some years to the life of carburation !
@srvanddt1 Жыл бұрын
I already seen this done before. An old neighbor who was farmer, had a 70's chevy truck with a v8. He took a carburetor off an old Honda 3 wheeler 250cc and made the intake adapter out of steel pipes and welded a flange to mount to the carb. He used it to haul his hay and other stuff and every time he had to go to town which was about 20 miles away, he would burn through a lot of gas. He drove that truck for 5 years that way.
@ThunderHead289 Жыл бұрын
Idk why your commenting that here - this isn't a lawn mower carb video. Everyone has been really stupid about the mower carb - it was to teach folds about fluid dynamics but everyone went full idiot on the economy completely ignoring the fact that the car made 50hp
@srvanddt1 Жыл бұрын
@@ThunderHead289 Did you not put a lawn mower carb on your V8? Now you are wondering why people are mentioning that you put a lawn mower carb on your car. Keep insulting your viewers, I assume you will get more subscribers that way.
@brandonburdette7895 Жыл бұрын
Buddy you know people don't like changing nothing but stay with it its a very important thing that people will grow to love for generations to come 🇺🇸
@wktomch9 ай бұрын
I really like the thought of this. I plan to buy this to better understand my carb and how my engine is running. Many thanks for your hard work
@jeffalvich9434 Жыл бұрын
I am very impressed Luke from what I've seen. I do understand carburetors quite well and what you have basically done was made an adapter to make to make a carburetor function very similar to what the predator carburetor back in the 60s and 70s did..... It used vacuum control and air flow to control fuel and air inlet mixture...... Which ensured the af mixture.
@kenny3217 Жыл бұрын
I don't know why anybody would give you grief about it, there are tons of aftermarket parts for old cars to make them a little easier to work with and more reliable. On that note, how soon will they be shipping? I pre-ordered mine for a Q-jet as soon as you dropped the first instruction video.
@jm-ve8ry Жыл бұрын
can't wait for it. 1979 FS Wagoneer with AMC 401, Holly Truck Avenger Carb.
@looknom2567 Жыл бұрын
this project reminds me of programmers. we often have issue with software from companies/others, so we write our own wrapper or version of it to suit our needs and sometimes give it to the community to use as well for anyone who prefers your approach over what is already there.
@Jonathan_Doe_ Жыл бұрын
I’m 100% gonna pre order when I get a couple of decent paydays in. A decent wideband gauge kit is like £200 anyway, so a couple of tanks of fuel more to get datalogging and see where the jetting is at, AND active fuelling correction is amazing.
@sirswerve2493 Жыл бұрын
The big three had this tech years back. I'm from California. Grew up with a 85 Bullnose, 300 six. I remember in 1988 when carbs where dead for production cars . remember when your local collage would teach carb tech. Yes I'm that old. Love how you made it adaptable to the old carb cars. Good luck. I hope you sell the hell out of this !
@IamMe10-4 Жыл бұрын
There will always be unhappy people... I however placed an order for this and can't wait for it to arrive. Thank you!
@dave3657 Жыл бұрын
My solution to my high compression engine was a high torque starter. Made a big difference and saved me some grey hairs worrying about getting started.
@karlkoenigstein4138 Жыл бұрын
Luke, I’ve tuned both my carbureted mild hot rod cars with a wideband sensor and an A/F gauge. It worked wonders on both of them for getting the tune remarkably good, but I never went the extra step to set it up for true data logging (just took notes at different drive conditions with a clipboard and adjusted from there. Got an order placed for one of your CCs, I’m really looking forward to (1) having the data logger function to better see what happens in the transitions and (2) I’m hopeful that the feedback control can help me break the idle / accel pump / steady state compromise on one of the cars which is a challenge to tune (draw-through Roots blower, old B&M supercharger setup). Keep up the cool videos and amazing work!
@Jonathan_Doe_ Жыл бұрын
That raises an interesting question, is the carb cheaters solenoid rated to handle boost on a blow through?
@karlkoenigstein4138 Жыл бұрын
@@Jonathan_Doe_ I'm guessing probably not - but I've tended to take most of my vacuum signals from below the carb but above the blower (everything but manifold vacuum/pressure for ignition timing, that is). I would put the CC air bleed above the blower, to start with...
@ercost60 Жыл бұрын
Luke, this is amazing concept and product. Congrats, what a game-changer!
@tommyboy8524 Жыл бұрын
Great way to end my Sunday a awesome uncle luke video