TIA portal Siemens HSC High Speed Counter - length measurement(position) - incremental encoder

TIA portal Siemens HSC High Speed Counter - length measurement(position) - incremental encode
‪@muhamedpasic83‬

[@ceylontruckers8428]

Have you a any idea encoder programming with factory io ?

[@achrafaqdim9002]

how can i do the same thins in Step 7 S300 can you help me please

[@Paul122M]

Hello, I want to make a conveyor belt to move distance by using an encoder, lets say by 50cm everytime a a cylinder moves up and down. How can I reset cv or axis_lenght? Also, Do i need to use ENO for any reason?

[@muhamedpasic83]

Make a comparison of axis_length with 50, and when these two values are the same, activate a bit, for example M0.0, and connect this bit M0.0 to CV

[@aczsair]

Esselamunaleyküm Muhammed, I am from Turkey, I have question about PLCSIM. I made many trying about PLCSIM and HSC counter. I had a problem . I could not wacth % ID1000 area for HSC_1 counter. How can wacth %ID1000 memory adreses in PLCSIM?

[@muhamedpasic83]

Alejkumu selam, you can't see ID1000 in PLCSIM, you have to have a real encoder and connect it to PLC, to be able to see how ID1000 changes. See in this video of mine that I have a real encoder kzbin.info/www/bejne/poXckqWmrbFpsM0

[@aczsair]

@@muhamedpasic83 Allah bless you.

[@reinventando1282]

que modelo y vercion d plc usas?

[@muhamedpasic83]

S7-1200 Siemens

[@likhombiza7647]

hey man, i'm having a project on a 3D crane and i want to counter weight and control the behavior of the crane using pid. Can you help on that?

[@muhamedpasic83]

kzbin.info/www/bejne/Znebfoyjjr2KZqM

[@muhamedpasic83]

kzbin.info/www/bejne/pWWlc5d9d8t_mpY

[@fiifinenyi2156]

please how can i get the library

[@muhamedpasic83]

Which version of the TIA Portal are you using, you should have a techonology in which CTR_HSC is located, if that's what you meant

[@reinventando1282]

ya lo acabe pero no entiendo que precionas para que funcione

[@muhamedpasic83]

I physically connected the encoder to the PLC, and I rotated the encoder

[@reinventando1282]

@@muhamedpasic83 se puede hacer simulado? si es asi podrias hacer un video de como hacerlo?

[@muhamedpasic83]

@@reinventando1282 It can't be simulated, I connected the encoder to inputs I0.0 and I0.1 on the PLC, and then I turned the encoder. I don't have that encoder now, I installed it on the machine. The project is downloaded to the actual PLC, not to the simulator

[@rishabhchatterjee680]

what are you doing man i dnt understand why music ?

[@muhamedpasic83]

If you don't like the music, turn it off